Search NASA⌕ Search

SEARCH · Search NASA

Results for “titanium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Electronic structure of the kagome metal YbTi 3 Bi 4 studied using torque magnetometry

This study investigates the electronic structure of the kagome metal YbTi 3 ⁢Bi 4 using high-field torque magnetometry. The torque signal measured at a maximum field of 41.5 T reveals clear de Haas–van Alphen (dHvA) oscillations with a major frequency peak at F δ ~ 130 T. By rotating the sample at various tilt angles Θ, we observed that F δ exhibits a nearly 1/cos⁡Θ dependence, indicating the presence of a quasi-two-dimensional (2D) Fermi surface (FS) in YbTi 3 ⁢Bi 4 . This argument is further supported by the detection of a forward-leaning, sawtoothlike waveform in the dHvA effect, a hallmark of 2D FS characteristics. Notably, we identified two high-frequency peaks near F χ ~ 1900 T and F λ ~ 5600 T; however, these peaks quickly disappear at Θ greater than 21°. To better understand experimental observations, we computed the electronic band structure and FS using ab initio density-functional theory (DFT). The electronic bands reveal the presence of several Dirac points, flat bands, and van Hove singularities near the Fermi level. Five bands cross the Fermi level and contribute to the FS of this material. The FS comprises cylindrical sheets, with theoretical frequencies from the FS pockets aligning well with the experimental dHvA frequencies. Several FS parameters characterizing F δ were determined by analyzing the temperature and field dependence of the dHvA oscillations using the Lifshitz-Kosevich theory. Further, the detailed electronic properties presented in this work provide critical insights into the electronic structure of YbTi 3 ⁢Bi 4 and other titanium-based kagome compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Electrical transport and torque magnetometry studies of the kagome compound LuV 6 ⁢Sn 6 under high magnetic fields

We present a comprehensive investigation of the kagome metal LuV 6 ⁢Sn 6 through magnetotransport and torque magnetometry studies in magnetic fields up to 41 T and temperatures as low as 0.3 K. Magnetoresistance measurements up to 31 T reveal clear Shubnikov–de Haas (SdH) oscillations with two dominant frequency peaks: 𝐹 𝛼 =12 T and 𝐹 𝛽 =155 T. The Berry phase Φ 𝐁 , calculated from Landau level fan diagrams, indicates a nontrivial topology for both the 𝛼- and 𝛽-orbits. To explore the possibility of higher-frequency signals in LuV 6 ⁢Sn 6 , we employed another technique: torque magnetometry. Torque measured with applied fields up to 41 T reveals clear de Haas–van Alphen (dHvA) oscillations, with frequency signals as high as 10 kT. Angular and temperature-dependent quantum oscillation measurements allowed us to extract the effective mass of charge carriers and map the Fermi surface of LuV 6 ⁢Sn 6 . To complement the experimental findings, we performed electronic band structure and Fermi surface calculations. The electronic bands of LuV 6 ⁢Sn 6 reveal intriguing features, including flat bands, van Hove singularities, and Dirac points near the Fermi level. Two bands cross the Fermi level, contributing a deformed cylindrical shape at the Γ-point and small chainlike Fermi surfaces near the Brillouin zone boundaries. Theoretical quantum oscillation frequencies derived from Fermi surface cross-sectional areas align well with experimental SdH and dHvA results. These combined experimental and theoretical insights provide a deeper understanding of the electronic structure of LuV 6 ⁢Sn 6 and establish the foundation for exploring electronic properties in other vanadium- and titanium-based kagome systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Surface acoustic waves and lattice vibrations in two-dimensional Ti 3 ⁢C 2 ⁢𝑇 𝑥 (𝑇 =O, F) MXene films

We investigated surface acoustic wave (SAW) propagation and lattice vibrations in two-dimensional (2D) titanium carbide (Ti 3 ⁢C 2 ⁢𝑇 x ) MXene films as a function of surface termination and layer stacking, using atomistic simulations. We found that SAW propagation velocity is highly sensitive to both single-layer properties and interlayer bonding. Surface terminations significantly modulate wave behavior, with oxygen and fluorine terminations producing distinct effects on wave propagation, with oxygen-terminated monolayers exhibiting 20% higher wave speeds than fluorine counterparts due to strengthened intralayer bonds. Key observations include the transition from one to two layers causing wave speed variations, and the development of interlayer modes that generate more dispersed lattice vibrations. As the film layer thickness increases, SAW propagation becomes predominantly confined to the upper surface, with coherence of vibrational modes diminishing in multilayer structures. These findings suggest MXene terminations and layer stacking are crucial parameters for controlling SAW behavior, offering promising avenues for novel acoustic wave device applications.

2-dimensional systems↗
DOE OSTI2025

Erbium quantum memory platform with long optical coherence via back-end-of-line deposition on foundry-fabricated photonics

Realizing scalable quantum interconnects necessitates the integration of solid-state quantum memories with foundry photonics processes. While prior photonic integration efforts have relied upon specialized, laboratory-scale fabrication techniques, this work demonstrates the monolithic integration of a quantum memory platform with low-loss foundry photonic circuits via back-end-of-line deposition. We deposited thin films of titanium dioxide (Ti⁢O 2 ) doped with erbium (Er) onto silicon nitride nanophotonic waveguides and studied Er optical coherence at subkelvin temperatures with photon echo techniques. Furthermore, we suppressed optical dephasing through ex-situ oxygen annealing and optimized measurement conditions, which yielded an optical coherence time of 64 μ⁢s (a 5-kHz homogeneous linewidth) and slow spectral diffusion of 27 kHz over 4 ms, results that are comparable to state-of-the-art Er nanophotonic devices. Combined with second-long electron spin lifetimes and demonstrated electrical control of Er emission, our findings establish Er:Ti⁢O 2 on foundry photonics as a manufacturable platform for ensemble and single-ion quantum memories.

Electro-optic effects↗
DOE OSTI2024

Investigation of Materials for Radio Frequency Antenna Plasma Facing Components

Here, the interaction of radio frequency (RF) sheaths with fusion reactor relevant materials (e.g., tungsten and titanium diboride) is being studied on the RF Plasma Interaction Experiment (RF PIE). The RF PIE consists of an electron cyclotron resonance (ECR) plasma source (2.45 GHz, 5 kW) with a biased and heated RF electrode that is used to simulate antenna surfaces in contact with the edge plasma. Helium plasmas (density of ~1e18/m 3 , electron temperature of 4–5 eV) are being used to explore sheath formation on material surfaces with biases up to 500 V. The erosion of a tungsten surface is being studied spectroscopically using a mirror-linked 1 m Czerny-Turner UV imaging spectrometer with a spectral resolution of 0.012 nm for measuring plasma emission in and near the sheath. Tungsten line emission intensity is higher for RF versus dc biasing for similar plasma conditions and average ion energy. RF biasing causes a broadening of the ion energy distribution function (IEDF) due to the RF sheath, as determined from the hPIC2 code, and results in enhanced sputtering. Calculations of the expected sputtering yield for dc and RF biasing are consistent with experimental observations of changes in the 400.9 nm tungsten line emission intensity as a function of ion energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Experimental Analysis of Advanced Turbine for Supercritical CO2 Power Cycle

An advanced first stage high pressure turbine blade for a supercritical CO2 power cycle is tested in the Big Rig for Aerothermal Stationary Turbine Analysis (BRASTA) annular cascade at the Purdue Experimental Turbine Aerothermal Laboratory (PETAL) high pressure blow down facility alongside a baseline blade for comparison of aerodynamic performance. Both geometries are tested simultaneously using a novel off-axis rig design to allow for the blade geometries to be scaled up to achieve higher Reynolds numbers. The off-axis design necessitates the use of discrete sectors of airfoils, which are designed and additively manufactured in house using an mSLA printer. Printing the blades allows for unique routing of passage for blade surface static pressure taps that contour to the blade shape instead of requiring a straight line view from surface tap to egress, allowing all instrumentation for 15%, 50%, and 85% span to exist in the same passage. A flow conditioning gauze [1] is placed upstream of the blade passages to impart pressure, Mach, and swirl profiles to mimic the rotor relative frame inlet conditions to the blade. Downstream, a sonic valve is used to alter the backpressure to achieve different pressure ratios for different blowdown setpoints. The design of the rig, sonic wheel, and instrumentation are discussed along with the manufacturing and GD&T of the blades with respect to the build-up of this novel experimental apparatus. Initial commissioning data is obtained from inlet total pressure and temperature rakes, blade static pressure taps, and exit total pressure rakes. Oil visualization is performed using a silicone oil mixture containing titanium dioxide and pigmented for contrast of the blade suction side surface with the hub and shroud endwalls. The viscosity of the oil is tuned so that the oil does not fully thin and blow away during the time of the test, and endoscopic cameras are placed in the rig for live monitoring and recording. The preliminary oil visualization and rake profiles are presented, showcasing the operability of this additively manufactured off-axis flow path design.

Tuite, Logan [Purdue University]↗
DOE OSTI2025

Compatibility of molten plutonium with wrought and additively manufactured metal crucibles

Understanding plutonium’s interaction with metals is crucial for optimizing pyrochemical operations, nuclear fuel containment, and various actinide processing techniques. Traditionally, tantalum crucibles are employed for plutonium processing due to their high durability, excellent temperature stability, and low solubility in plutonium. However, tantalum faces challenges such as plutonium wetting and diffusion, making surface coatings particularly important for crucibles in pyrochemical applications to enhance corrosion resistance against plutonium. Tantalum is also expensive and difficult to machine, prompting the need for advanced manufacturing techniques to address these challenges. Here, in this work, we investigate the interaction of Pu with tantalum and titanium crucibles fabricated using both traditional machining methods and laser powder bed fusion (LPBF) additive manufacturing (AM). LPBF-AM is an advanced technique that allows for the creation of complex geometries from traditionally difficult-to-machine metals by using a high-powered laser to build parts. Previous studies of conventional manufactured tantalum have utilized oxidation and carburization of the surface to mitigate plutonium wetting; however, no studies of surface modified LPBF-AM material have been undertaken. These studies are crucial, given the typical differences in the grain structure between conventional and LPBF-AM materials. All crucibles underwent differential scanning calorimetry to confirm the melting of plutonium. Subsequently, the crucibles were sectioned and mounted in epoxy for microstructural analysis using optical microscopy and scanning electron microscopy. This investigation, comparing the performance of wrought vs AM metal crucibles, provides a basis for future tooling applications in actinide processing techniques and can address the challenges associated with traditional machining, particularly in pyrochemical applications.

Actinides↗
DOE OSTI2025

Large enhancement of ferroelectric properties of perovskite oxides via nitrogen incorporation

Perovskite oxides have a wide variety of physical properties that make them promising candidates for versatile technological applications including nonvolatile memory and logic devices. Chemical tuning of those properties has been achieved, to the greatest extent, by cation-site substitution, while anion substitution is much less explored due to the difficulty in synthesizing high-quality, mixed-anion compounds. Here, nitrogen-incorporated BaTiO3 thin films have been synthesized by reactive pulsed-laser deposition in a nitrogen growth atmosphere. The enhanced hybridization between titanium and nitrogen induces a large ferroelectric polarization of 70 μC/cm2 and high Curie temperature of ~1213 K, which are ~2.8 times larger and ~810 K higher than in bulk BaTiO3, respectively. These results suggest great potential for anion-substituted perovskite oxides in producing emergent functionalities and device applications.

Wang, Tao↗
DOE OSTI2024

Topological grain boundary segregation transitions

Engineering the structure of grain boundaries (GBs) by solute segregation is a promising strategy to tailor the properties of polycrystalline materials. Solute segregation triggering phase transitions at GBs has been suggested theoretically to offer different pathways to design interfaces, but an understanding of their intrinsic atomistic nature is missing. Here, we combined atomic resolution electron microscopy and atomistic simulations to discover that iron segregation to GBs in titanium stabilizes icosahedral units (“cages”) that form robust building blocks of distinct GB phases. Owing to their five-fold symmetry, the iron cages cluster and assemble into hierarchical GB phases characterized by a different number and arrangement of the constituent icosahedral units. Our advanced GB structure prediction algorithms and atomistic simulations validate the stability of these observed phases and the high excess of iron at the GB that is accommodated by the phase transitions.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Neutron-Friendly Li-Ion Battery Coin Cell for In Situ 3D Visualization of Li Plating

Advanced battery characterization using in situ/operando neutron imaging is critical for uncovering degradation modes such as lithium (Li) plating in Li-ion batteries (LIBs). However, conventional LIBs hinder operando neutron radiography (NR) and in situ neutron micro-computed tomography (N-μCT) for visualizing Li plating near the graphite-separator interface due to strong attenuation from hydrogen-rich components like PP–PE–PP separators, electrolyte, and Fe-based spacers. In this work, we designed and tested a neutron-friendly battery (NFB) optimized for in situ Li detection during extreme fast charging (XFC). Guided by neutron attenuation cross-sections and material transmission, the NFB enables clear visualization at the graphite–separator interface, which is typically opaque in standard LIBs. Electrochemical tests show the NFB exhibits voltage/current responses like standard cells for up to 50 XFC cycles. However, its lower reversibility and capacity are likely due to Cu-coated Al spacer degradation from delamination or corrosion. We propose titanium spacers as a more stable alternative, albeit requiring custom machining. Using this optimized cell, we achieved simultaneous neutron tomography of multiple cells, capturing in situ 3D images of dead Li accumulation, particularly near graphite edges. These heterogeneous deposits and disconnected Li clusters suggest localized current density hotspots during XFC.

25 ENERGY STORAGE↗
DOE OSTI2024

Designing Ti-6Al-4V microstructure for strain delocalization using neural networks

Abstract The deformation behavior of Ti-6Al-4V titanium alloy is significantly influenced by slip localized within crystallographic slip bands. Experimental observations reveal that intense slip bands in Ti-6Al-4V form at strains well below the macroscopic yield strain and may serially propagate across grain boundaries, resulting in long-range localization that percolates through the microstructure. These connected, localized slip bands serve as potential sites for crack initiation. Although slip localization in Ti-6Al-4V is known to be influenced by various factors, an investigation of optimal microstructures that limit localization remains lacking. In this work, we develop a novel strategy that integrates an explicit slip band crystal plasticity technique, graph networks, and neural network models to identify Ti-6Al-4V microstructures that reduce the propensity for strain localization. Simulations are conducted on a dataset of 3D polycrystals, each represented as a graph to account for grain neighborhood and connectivity. The results are then used to train neural network surrogate models that accurately predict localization-based properties of a polycrystal, given its microstructure. These properties include the ratio of slip accumulated in the band to that in the matrix, fraction of total applied strain accommodated by slip bands, and spatial connectivity of slip bands throughout the microstructure. The initial dataset is enriched by synthetic data generated by the surrogate models, and a grid search optimization is subsequently performed to find optimal microstructures. Describing a 3D polycrystal with only a few features and a combination of graph and neural network models offer robustness compared to the alternative approaches without compromising accuracy. We show that while each material property is optimized through a unique microstructure solution, elongated grain shape emerges as a recurring feature among all optimal microstructures. This finding suggests that designing microstructures with elongated grains could potentially mitigate strain localization without compromising strength.

Ahmadikia, Behnam↗
DOE OSTI2025

TaTi_BCC_SolidSolution_128atoms_VASP6

We performed density functional theory (DFT) calculations for body-centered-cubic (BCC) structures with 128 lattices sites of solid solution binary alloys tantalum-titanium (Ta-Ti). The electronic structures of alloys have been calculated using Vienna Ab initio Simulation Package (VASP). Within this package the DFT approach is used to reduce many-body Schrodinger equation to set of single particle Kohn-Sham (KS) equations. The generalized electronic exchange-correlation functional is described by generalized gradient approximation with the Perdew-Burke-Ernzerhof parametrization. The electron-ion interactions is described by pseudopotentials developed within the plane-wave basis projector augmented-wave (PAW) approach. These pseudopotentials are available at the VASP portal (http://cms.mpi.univie.ac.at/vasp/). Our calculations have been run with the pseudopotentials treating s and p semi-core states as valence in case for the elements Hf and Nb. The electronic densities and potentials are expanded over plane-waves with energy cutoff of 350 eV. 2x2x2 k-mesh and normal precision were used. The alloys were modeled by supercell containing 128 randomly distributed atoms. At initial step the atoms occupy perfect bcc lattice cites. This initial structure was optimized until energy changes less than 1e-6 eV, while forces acting on atoms don't exceed 1e-2 eV/angstrom. The electron-ion interaction is described by PAW pseudopotentials. The calculations have been collected by sampling chemical compositions across the entire compositional range. The chemical compositions have been sampled by progressively changing the number of atoms per constituent by 4. For each chemical composition of binaries and ternaries, the first-principle calculations have been run for 100 randomized arrangements of the constituents on the BCC lattice sites. We collected data for a total of 3,100 randomized atomic structures over 31 chemical compositions. The calculations have been collected on Air Force HPC11 cluster using the VASP 6.5.1. Additional methodology and file structure information is available in the dataset README.txt file.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Deuteron-induced reactions on natural Zr from threshold to 50 MeV: production of 86g Y

Two stacks of thin Zr foils were irradiated with 30 and 50 MeV deuterons, respectively, using the Lawrence Berkeley National Laboratory 88-Inch Cyclotron, and 19 excitation functions for nat Zr(d,x) reactions were measured over a beam energy range of 6.3–47.64 MeV, where the independent cross sections for nat Zr(d,x) 88 Nb and nat Zr(d,x) 86m,g Y were measured for the first time. The well-characterized nat Fe(d,x) 56 Co, nat Ni(d,x) 56 Co, nat Ni(d,x) 58 Co, nat Ni(d,x) 61 Cu, nat Ti(d,x) 46 Sc and nat Ti(d,x) 48 V monitor reactions were used to determine the deuteron beam current throughout the stacks. All cross sections were determined using High Purity Germanium (HPGe) detector γ-ray spectroscopy. A variance minimization technique was employed to simultaneously constrain the deuteron beam currents with multiple monitor reactions, thus reducing systematic uncertainties. An additional 16 channels are reported for reactions on the nickel, titanium, and iron monitor foils, leading to a total of 35 excitation functions, with seven reaction channels reported for the first time in this work. The measured excitation functions are compared to calculations provided by the reaction modeling codes TALYS – 2.0, ALICE – 2020, CoH – 3.5.3 and EMPIRE – 3.2.3, as well as the TENDL – 2023 data library. The degree of agreement between theory and experiments is discussed. The possible production of the important PET radionuclide 86g Y via the nat Zr(d,x) route was critically examined. The physical yields for nat Zr(d,x) 86 Y and other yttrium isotopes produced were calculated and compared to other production pathways. Due to high-level of associated radionuclide impurities, this route cannot deliver 86g Y suitable for medical applications.

86gY↗
DOE OSTI2026

Topsoil bulk geochemical compositions - An updated harmonized global dataset

Mineral weathering is a key biogeochemical process because of the capacity of minerals to stabilize organic matter. However, predicting soil weathering status across large spatial areas still isn’t possible due to a lack of global data and theoretical frameworks. To address this knowledge gap, multiple global datasets of bulk topsoil geochemical compositions have been harmonized using R. These datasets document topsoil bulk geochemical compositions across five continents (n = ~16,000 observations). Source data for these observations include the EuroGEOSurveys Geochemical Baseline Database (FOREGS), the US Geological Survey National Geochemical Database (NASGLP), the Geochemical Atlas of Australia (GAA), the US Geological Survey Alaska Geochemical Database (AGD84), the National Cooperative Soil Survey (NCSS), the European Geochemical Mapping of Agricultural Soil (GEMAS), Ecorespira-Amazon (ERA), the New Zealand Geochemical Baseline Survey (NZ_GBS), and the African Soil Information Service (AFSIS). Major elements observed include Aluminum (Al), Calcium (Ca), Iron (Fe), Potassium (K), Magnesium (Mg), Sodium (Na), Titanium (Ti), Manganese (Mn), Phosphorus (P), Carbon (C), and Sulfur (S). This data package includes the harmonized dataset itself, and the R scripts necessary to harmonize these datasets, in addition to metadata that describes all columns, files, and databases used in this project. Methods & Sampling Step 1 – Databases of geochemical data identified This study aimed to leverage existing measurements of topsoil geochemical data. Databases were first identified and deemed appropriate for inclusion if they were measuring soils and performed these measurements on the <2mm soil fraction. Databases such as NCSS and AGD84 needed more post processing to include in the database and this was done using the NCSS_datamerge_031626 R file and Alaska_USGSmerge_031626 R file, respectively. Step 2 – Database harmonization Once appropriate databases were identified, they were harmonized for ease of analysis using the R script Database_Harmonization_031826. This included removing columns from original datasets that would not be used in analysis (removed columns are noted in the code). Then, data cleaning procedures specific to each dataset were undertaken. This includes standardizing columns to include units and adding metadata columns regarding procedures for analyzing specific elements. Functions for standardizing measurements and units are outline in R files: calculate element_mg_kg_031626, calculate_oxide_wt_perc_031626, change_oxide_caps_031626, and conv_2_numeric_031626. This also included adding a unique identifier for each sample to identify it with its respective database (see CD_ID in data dictionary). Geographic information: Data reflect a compilation of datasets collected globally. Geographic areas covered by each of the datasets include: - EuroGEOSurveys Geochemical Baseline Database (FOREGS) - European continent - North American Soil Geochemical Landscapes (NASGLP) - continental United States and limited parts of Canada (see database key for more details) - National Geochemical Survey of Australia (GAA) - Australia - Alaska geochemical database (AGDB4) - Alaska - National Cooperative Soil Survey (NCSS) - Global measurements, but concentrated in the continental United States - Geochemical data for arable land and land under permanent grass cover in continental Europe (GEMAS) - continental Europe - Ecorespira-Amazon (ERA) - Geochemical data from the Amazon basin - Geochemical baseline data for New Zealand (NZGBS) - New Zealand - Geochemical data collected across continental Africa (AfSIS) - Measurements across Africa

EARTH SCIENCE > LAND SURFACE > SOILS↗
DOE OSTI2024

CHARACTERIZATION OF RADIATION DAMAGES TO POSITRON SOURCE MATERIALS

The secondary beam production target at future positron sources at the Continuous Electron Beam Accelerator Facility (CEBAF), the International Linear Collider (ILC) or the Future Circular Collider (FCC), features unprecedented mechanical and thermal stresses which may compromise sustainable and reliable operation. Candidate materials are required to possess high melting temperature together with excellent thermal conductivity, elasticity and radiation hardness properties. In order to substantiate the material choice for the CEBAF and ILC positron sources, the response of candidate materials such as titanium alloys, tungsten, and tantalum to electron beam irradiation was experimentally investigated. CEBAF and ILC expected operating conditions were mimicked using the 3.5 MeV electron beam of the MAMI facility injector. The material degradations were precisely analyzed via high energy X-ray diffraction at the HEMS beamline operated by the Helmholtz-Zentrum Hereon at the PETRA III synchrotron facility. This work reports the results of these measurements and their interpretation.

Lengler, T.↗
DOE OSTI2024

Low RF loss DC conductive ceramic for RF windows

Charging of RF windows has historically been problematic, frequently resulting in damage to the window severe enough that the window needs to be replaced. Many attempts have been made to prevent charging and therefore improve window lifetime, the most successful and common of which is coating the window with titanium nitride (TiN). Surface coatings such as TiN rely on the secondary electron yield of the coating material being lower than that of the ceramic window material, reducing the number of electrons emitted from a variety of mechanisms. An alternative approach is to introduce a small amount of DC conductivity to the ceramic itself, turning the traditionally insulating window into a mildly conductive one. This allows any charge on the surface of the window to drain rather than build until a discharge happens. A magnesium titanate ceramic has been developed with a small DC conductivity and used to make RF windows. Several window assemblies have been produced and tested, including 1.3 GHz waveguide and 650 MHz coaxial designs. The results of the conductive ceramic window test program will be presented.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

High-Energy Laser Direct Strike Assessment for NIF CryoXNBS Snout and Naiad SNM Container

An experimental IPT performed two NIF shots as an assessment of the effect of a direct laser beam strike impact on the NIF CryoXNBS snout and Naiad container. Four aligned NIF outer cone beams at best focus, 42 kJ total, struck a four millimeter thick stainless plate. In the first shot, the struck plate was followed by a 1.75 mm gap and a 2.0 millimeter stainless plate to create a surrogate geometry for the current CryoXNBS snout and Naiad container. There was minor plastic deformation of the rear plate rear surface with no evidence of bulk failure. The second shot tested a layered glass-filled polycarbonate and titanium shield placed in the gap. Nondestructive assay was sufficient to metrologize the beam strike area and the damage induced to the NIF target assemblies.

36 MATERIALS SCIENCE↗
DOE OSTI2024

New dynamic diamond anvil cell for time-resolved radial x-ray diffraction

The dynamic diamond anvil cell (dDAC) is a recently developed experimental platform that has shown promise for studying the behavior of materials at strain rates ranging from intermediate to quasi-static and shock compression regimes. Combining dDAC with time-resolved x-ray diffraction (XRD) in the radial geometry (i.e., with incident x-rays perpendicular to the axis of compression) enables the study of material properties such as strength, texture evolution, and deformation mechanisms. This work describes a radial XRD dDAC setup at beamline P02.2 (Extreme Conditions Beamline) at DESY’s PETRA III synchrotron. Time-resolved radial XRD data are collected for titanium, zirconium, and zircon samples, demonstrating the ability to study the strength and texture of materials at compression rates above 300 GPa/s. In addition, the simultaneous optical imaging of the DAC sample chamber is demonstrated. The ability to conduct simultaneous radial XRD and optical imaging provides the opportunity to characterize plastic strain and deviatoric strain rates in the DAC at intermediate rates, exploring the strength and deformation mechanisms of materials in this regime.

47 OTHER INSTRUMENTATION↗