Search NASA⌕ Search

SEARCH · Search NASA

Results for “transportation system”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Dynamic Spectrum Allocation in Urban Air Transportation System via Deep Reinforcement Learning

The emerging concepts of Urban Air Mobility (UAM) and Advanced Air Mobility (AAM) open a new paradigm for urban air transportation. A big challenge is that these new aerial vehicles will quickly saturate the already crowded aviation spectrum, which is an essential resource to ensure reliable communications for safe operations. In this paper, we consider an air transportation system where multiple aerial vehicles are operated to transport passengers or cargo from different sources to destinations along their pre-defined paths. During the flight, the minimum communication Quality of Service (QoS) requirement must be achieved to ensure flight safety. Our objective is to minimize the average mission completion time by jointly optimizing the velocity selection and spectrum allocation for all aerial vehicles. We formulate the optimization problem as a multi-stage Markov Decision Process (MDP) where the optimization variables are coupled together. A multi-agent Deep Reinforcement Learning (DRL) based solution is proposed where Value Decomposition Networks (VDN) algorithm is utilized to take discrete actions. Additionally, we propose a heuristic greedy algorithm as a baseline solution. Simulation results show that our learning based solution outperforms the heuristic greedy algorithm and another Orthogonal Multiple Access (OMA) solution in minimizing the mission completion time.

Ruixuan Han↗
NASA NTRSDate not supplied

Dynamic Spectrum Allocation in Urban Air Transportation System via Deep Reinforcement Learning

The emerging concepts of Urban Air Mobility (UAM) and Advanced Air Mobility (AAM) open a new paradigm for urban air transportation. A big challenge is that these new aerial vehicles will quickly saturate the already crowded aviation spectrum, which is an essential resource to ensure reliable communications for safe operations. In this paper, we consider an air transportation system where multiple aerial vehicles are operated to transport passengers or cargo from different sources to destinations along their pre-defined paths. During the flight, the minimum communication Quality of Service (QoS) requirement must be achieved to ensure flight safety. Our objective is to minimize the average mission completion time by jointly optimizing the velocity selection and spectrum allocation for all aerial vehicles. We formulate the optimization problem as a multi-stage Markov Decision Process (MDP) where the optimization variables are coupled together. A multi-agent Deep Reinforcement Learning (DRL) based solution is proposed where Value Decomposition Networks (VDN) algorithm is utilized to take discrete actions. Additionally, we propose a heuristic greedy algorithm as a baseline solution. Simulation results show that our learning based solution outperforms the heuristic greedy algorithm and another Orthogonal Multiple Access (OMA) solution in minimizing the mission completion time.

Ruixuan Han↗
NASA NTRS1975

Propulsion technology needs for advanced space transportation systems

Plans have been formulated for chemical propulsion technology programs to meet the needs of advanced space transportation systems during the two decades from 1980 to the year 2000. The many possible vehicle applications have been reviewed and cataloged to isolate the common threads of primary propulsion technology that will satisfy near term requirements in the first decade and at the same time establish the technology groundwork for various potential far term applications in the second decade. Two thrust classes of primary propulsion engines are apparent: (1) 5,000 to 30,000 pounds thrust for upper stages and space maneuvering; (2) large booster engines of over 250,000 pounds thrust. Six major classes of propulsion systems and the important subdivisions of each class have been identified. The relative importance of each class is discussed in terms of the number of potential applications, the likelihood of that application materializing, and the criticality of the technology needed. Specific technology programs are described and scheduled to fulfill the anticipated primary propulsion technology requirements of the period.

Gregory, J. W.↗
NASA NTRS1992

An improved lateral control wheel steering law for the Transport Systems Research Vehicle (TSRV)

A lateral control wheel steering law with improved performance was developed for the Transport Systems Research Vehicle (TSRV) simulation and used in the Microwave Landing System research project. The control law converted rotational hand controller inputs into roll rate commands, manipulated ailerons, spoilers, and the rudder to achieve the desired roll rates. The system included automatic turn coordination, track angle hold, and autopilot/autoland modes. The resulting control law produced faster roll rates (15 degrees/sec), quicker response to command reversals, and safer bank angle limits, while using a more concise program code.

Ragsdale, W. A.↗
NASA NTRS1992

Heat pipe heat transport system for the Stirling Space Power Converter (SSPC)

Life issues relating to a sodium heat pipe heat transport system are described. The heat pipe system provides heat, at a temperature of 1050 K, to a 50 kWe Stirling engine/linear alternator power converter called the Stirling Space Power Converter (SSPC). The converter is being developed under a National Aeronautics and Space Administration program. Since corrosion of heat pipe materials in contact with sodium can impact the life of the heat pipe, a literature review of sodium corrosion processes was performed. It was found that the impurity reactions, primarily oxygen, and dissolution of alloy elements were the two corrosion process likely to be operative in the heat pipe. Approaches that are being taken to minimize these corrosion processes are discussed.

Alger, Donald L.↗
NASA NTRS1994

Results of demonstration test for receiving and processing of flight data from the Space Transportation System

This report presents the methodology used for receiving, processing, and analyzing flight data from the Space Transportation System at NASA Langley Research Center (LaRC) on a near real time basis. The task was performed in October 1993 during the STS-58 mission using data from the Orbital Acceleration Research Experiment (OARE). The transmitting and receiving of OARE data on a near real time basis at LaRC were highly successful. The time to receive and record the data from the payload tape recorder required 20 to 30 minutes. Payload tape recorder data were downlinked at intervals of 4 to 6 hours rather than continuously. The quality check of the data at LaRC required 2 minutes. Four to 5 minutes of time was required to obtain preliminary acceleration levels of the Orbiter that are within 1 micro-g of the absolute accelerations This demonstration has shown that, with operational modifications LaRC has the capability to serve as a User Operation Center for receiving and processing flight data from the Space Shuttle and Space Station.

Russell, James W.↗
NASA NTRS2004

Preliminary Validation of the Small Aircraft Transportation System Higher Volume Operations (SATS HVO) Concept

This document provides a preliminary validation of the Small Aircraft Transportation System (SATS) Higher Volume Operations (HVO) concept for normal conditions. Initial results reveal that the concept provides reduced air traffic delays when compared to current operations without increasing pilot workload. Characteristic to the SATS HVO concept is the establishment of a newly defined area of flight operations called a Self-Controlled Area (SCA) which would be activated by air traffic control (ATC) around designated non-towered, non-radar airports. During periods of poor visibility, SATS pilots would take responsibility for separation assurance between their aircraft and other similarly equipped aircraft in the SCA. Using onboard equipment and simple instrument flight procedures, they would then be better able to approach and land at the airport or depart from it. This concept would also require a new, ground-based automation system, typically located at the airport that would provide appropriate sequencing information to the arriving aircraft. Further validation of the SATS HVO concept is required and is the subject of ongoing research and subsequent publications.

Williams, Daniel↗
NASA NTRS1978

Technology requirements for advanced earth orbital transportation systems. Volume 2: Summary report

The results of efforts to identify the technology requirements for advanced earth orbital transportation systems are reported. Topics discussed include: (1) design and definition of performance potential of vehicle systems, (2) advanced technology assessment, and (3) extended performance. It is concluded that the horizontal take-off concept is the most feasible system considered.

Hepler, A. K.↗
NASA NTRS1982

Development of Rene' 41 honeycomb structure as an integral cryogenic tankage/fuselage concept for future space transportation systems

The status of the structural development of an integral cryogenic-tankage/hot-fuselage concept for future space transportation systems (STS) is discussed. The concept consists of a honeycomb sandwich structure which serves the combined functions of containment of cryogenic fuel, support of vehicle loads, and thermal protection from an entry heating environment. The inner face sheet is exposed to a cryogenic (LH2) temperature of -423 F during boost; and the outer face sheet, which is slotted to reduce thermal stress, is exposed to a maximum temperature of 1400 F during a high altitude, gliding entry. A fabrication process for a Rene' 41 honeycomb sandwich panel with a core density less than 1 percent was developed which is consistent with desirable heat treatment processes for high strength.

Shideler, J. J.↗
NASA NTRS1982

Development of Rene 41 honeycomb structure as an integral cryogenic tankage/fuselage concept for future space transportation systems

The status of the structural development of an integral cryogenic-tankage/hot-fuselage concept for future space transportation systems is reviewed. The concept comprises a honeycomb sandwich structure that serves the combined functions of containing the cryogenic fuel, supporting the vehicle loads, and protecting the spacecraft from entry heating. The inner face sheet is exposed to cryogenic temperature of -423 F during boost; the outer face sheet, which is slotted to reduce thermal stress, is exposed to a maximum temperature of 1400 F during a high-altitude gliding entry. Attention is given to the development of a fabrication process for a Rene 41 honeycomb sandwich panel with a core density of less than 1 percent that is consistent with desirable heat treatment processes for high strength.

Shideler, J. L.↗
NASA NTRS1991

Space Transportation System (STS): Emergency support

The DSN (Deep Space Network) mission support requirements for emergency support of the Space Transportation System (STS) are summarized. Coverage would be provided by the DSN during emergencies that would prevent communications between the shuttle and the White Sands TDRSS receiving station. The DSN support requirements are defined through the presentation of tables and narratives describing the spacecraft flight profile; DSN support coverage; frequency assignments; support parameters for telemetry, command and support systems; and tracking support responsibility.

Janoski, T.↗
NASA NTRS1992

Aluminum-fueled rockets for the space transportation system

Aluminum-fueled engines, used to propel orbital transfer vehicles (OTV's), offer benefits to the Space Transportation System (STS) if scrap aluminum can be scavenged at a reasonable cost. Aluminum scavenged from Space Shuttle external tanks could replace propellants hauled from Earth, thus allowing more payloads to be sent to their final destinations at the same Shuttle launch rate. To allow OTV use of aluminum fuel, two new items would be required: a facility to reprocess aluminum from external tanks and an engine for the OTV which could burn aluminum. Design of the orbital transfer vehicle would have to differ substantially from current concepts for it to carry and use the aluminum fuel. The aluminum reprocessing facility would probably have a mass of under 15 metric tons and would probably cost less that $200,000,000. Development of an aluminum-burning engine would no doubt be extremely expensive (1 to 2 billion dollars), but this amount would be adequately repaid by increased STS throughput. Engine production cost is difficult to estimate, but even an extremely high cost (e.g., $250,000,000 per engine) would not significantly increase orbit-raising expenses.

Cutler, Andrew Hall↗
NASA NTRS1975

Advanced regenerative-cooling techniques for future space transportation systems

A review of regenerative-cooling techniques applicable to advanced planned engine designs for space booster and orbit transportation systems has developed the status of the key elements of this cooling mode. This work is presented in terms of gas side, coolant side, wall conduction heat transfer, and chamber life fatigue margin considerations. Described are preliminary heat transfer and trade analyses performed using developed techniques combining channel wall construction with advanced, high-strength, high-thermal-conductivity materials (NARloy-Z or Zr-Cu alloys) in high heat flux regions, combined with lightweight steel tubular nozzle wall construction. Advanced cooling techniques such as oxygen cooling and dual-mode hydrocarbon/hydrogen fuel operation and their limitations are indicated for the regenerative cooling approach.

Wagner, W. R.↗
NASA NTRS1977

Statement of Chester M. Lee, Director, Space Transportation Systems Operations, NASA, and Phillip E. Culbertson, Assistant Administrator of Planning and Program Integration, NASA

Payloads for the Space Transportation System 560 flights, particularly the NASA payloads, are discussed. NASA payloads will make up approximately 50% of total payloads in these flights. Proposed Spacelab experiments are listed and discussed; plans for accommodating commercial user payloads are then outlined, including price schedules.

Source record↗