Search NASA⌕ Search

SEARCH · Search NASA

Results for “updates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Model updating based on sensitivities of system matrices

A new approach, which allows the physical parameters to be adjusted and preserves the structural connectivity condition, is developed in this paper. This approach is based on the sensitivities of the mass and stiffness matrices with respect to physical parameters in an attempt to use test data to correct the analytical model. The analytical mass and stiffness matrices can be corrected simultaneously. The modal data of the updated model dramatically converges to that of the test model. A numerical example is presented to illustrate the feasibility of this approach. Comparisons with the other methods are also given.

Huang, Hsin-Hsen↗

The Tropical Rainfall Measuring Mission (TRMM) update and its role in EOS and GEWEX

Updated information is presented on the U.S./Japan Tropical Rainfall Measuring Mission (TRMM), which is a relatively low-budget earth-probe satellite with a secondary objective of measuring upwelling radiation from the clouds and the surfaces below the satellite. Particular attention is given to the TRMM rain measurements and the characteristics of the three TRMM rain measuring instruments: the microwave radiometer, the radar, and the visible/IR radiometer. Also discussed are the TRMM contributions to EOS and GEWEX.

Simpson, Joanne↗

Update on the NASA ER-2 Doppler radar system (EDOP)

An update on the development status of EDOP, a dual-beam Doppler weather radar to be flown on the NASA ER-2 aircraft, is presented. The EDOP system is an X-band Doppler radar with a dual-beam configuration in the ER-2 nose, such that one beam is nadir pointing and the other at an angle of 35 deg forward of the nadir. The dual beams, as used on ELDORA, directed at, e.g., 20 deg fore and aft of the normal to the fuselage, require only a linear rather than L-shaped flight pattern to compute air motions. On the ER-2, EDOP will essentially map out high-resolution time-height sections of reflectivity and vertical hydrometeor velocity from the nadir beam. Flying EDOP with other ground-based and airborne radars will also provide a more complete picture of the overall 3D precipitation and hydrometeor structure of storms.

Heymsfield, Gerald M.↗

Updating finite element dynamic models using an element-by-element sensitivity methodology

A sensitivity-based methodology for improving the finite element model of a given structure using test modal data and a few sensors is presented. The proposed method searches for both the location and sources of the mass and stiffness errors and does not interfere with the theory behind the finite element model while correcting these errors. The updating algorithm is derived from the unconstrained minimization of the squared L sub 2 norms of the modal dynamic residuals via an iterative two-step staggered procedure. At each iteration, the measured mode shapes are first expanded assuming that the model is error free, then the model parameters are corrected assuming that the expanded mode shapes are exact. The numerical algorithm is implemented in an element-by-element fashion and is capable of 'zooming' on the detected error locations. Several simulation examples which demonstate the potential of the proposed methodology are discussed.

Farhat, Charbel↗

The effect of initial imperfections on shell stability: An updated review

The development of the Delft Interactive Shell Design Code (DISDECO) is described. The purpose is to make the accumulated theoretical, numerical, and practical knowledge of the last years readily accessible to users interested in the analysis of buckling sensitive structures. With this open ended, hierarchical, interactive computer code, the user can access workstation programs of increasing complexity. As a first update of DISDECO, the computational modules of the initial level were modified so as to handle combined loads consisting of axial compression, internal and external pressure, and clockwise or counter clockwise torque. The applied load is assumed to have a uniform spatial distribution and is divided into a fixed and a variable part. The magnitude of the variable part is allowed to vary in proportion to a load parameter Lambda. This leads to an eigenvalue problem for the critical lambda sub C.

Arbocz, J.↗

Automating a human factors evaluation of graphical user interfaces for NASA applications: An update on CHIMES

Capturing human factors knowledge about the design of graphical user interfaces (GUI's) and applying this knowledge on-line are the primary objectives of the Computer-Human Interaction Models (CHIMES) project. The current CHIMES prototype is designed to check a GUI's compliance with industry-standard guidelines, general human factors guidelines, and human factors recommendations on color usage. Following the evaluation, CHIMES presents human factors feedback and advice to the GUI designer. The paper describes the approach to modeling human factors guidelines, the system architecture, a new method developed to convert quantitative RGB primaries into qualitative color representations, and the potential for integrating CHIMES with user interface management systems (UIMS). Both the conceptual approach and its implementation are discussed. This paper updates the presentation on CHIMES at the first International Symposium on Ground Data Systems for Spacecraft Control.

Jiang, Jian-Ping↗

CET93 and CETPC: An interim updated version of the NASA Lewis computer program for calculating complex chemical equilibria with applications

The NASA Lewis chemical equilibrium program with applications continues to be improved and updated. The latest version is CET93. This code, with smaller arrays, has been compiled for use on an IBM or IBM-compatible personal computer and is called CETPC. This report is intended to be primarily a users manual for CET93 and CETPC. It does not repeat the more complete documentation of earlier reports on the equilibrium program. Most of the discussion covers input and output files, two new options (ONLY and comments), example problems, and implementation of CETPC.

Mcbride, Bonnie J.↗

A review of an updated synthesis of noise/annoyance relationships

This report evaluates the evidence supporting the 'dosage-effect relationship for the prevalence of annoyance due to general transportation noise' that was originally presented in 1978 and more recently updated in 1991. The synthesis methods and many of the constituent studies' reports are examined. The weaknesses of the synthesis are identified and found to be partly due to the synthesis methodology, but fundamentally to the lack of comparability in the constituent studies' methodologies and reporting procedures. Several suggested improvements to survey, analysis, and synthesis techniques are proposed.

Fields, James M.↗

National Educators' Workshop: Update 1993. Standard Experiments in Engineering Materials Science and Technology

This document contains a collection of experiments presented and demonstrated at the National Educators' Workshop: Update 93 held at the NASA Langley Research Center in Hampton, Virginia, on November 3-5, 1993. The experiments related to the nature and properties of engineering materials and provided information to assist in teaching about materials in the education community.

Gardner, James E.↗

Update to the NASA Lewis Ice Accretion Code LEWICE

This report is intended as an update to NASA CR-185129 'User's Manual for the NASA Lewis Ice Accretion Prediction Code (LEWICE).' It describes modifications and improvements made to this code as well as changes to the input and output files, interactive input, and graphics output. The comparison of this code to experimental data is shown to have improved as a result of these modifications.

Wright, William B.↗

LDEF environment modeling updates

An updated gas dynamics model for gas interactions around the LDEF is presented that includes improved scattering algorithms. The primary improvement is more accurate predictions of surface fluxes in the wake region. The code used is the Integrated Spacecraft Environments Model (ISEM). Additionally, initial results of a detailed ISEM prediction model of the Solar Array Passive LDEF Experiment (SAMPLE), A0171, is presented. This model includes details of the A0171 geometry and outgassing characteristics of the many surfaces on the experiment. The detailed model includes the multiple scattering that exists between the ambient atmosphere, LDEF outgassing, and atomic oxygen erosion products. Predictions are made for gas densities, surface fluxes and deposition at three different time periods of the LDEF mission.

Gordon, Tim↗

A proposed update to the solar irradiance spectrum used in LOWTRAN and MODTRAN

The calibrated upwelling radiance spectra measured by AVIRIS are increasingly being analyzed with radiative transfer codes. Analysis of AVIRIS data with the LOWTRAN and MODTRAN radiative transfer codes has led to indications of an error in the solar irradiance spectra used by these codes. This paper presents evidence for the error and proposed update to the solar irradiance spectra used by LOWTRAN and MODTRAN.

Green, Robert O.↗

Microgravity Combustion Science: 1995 Program Update

Microgravity greatly benefits the study of fundamental combustion processes. In this environment, buoyancy-induced flow is nearly eliminated, weak or normally obscured forces and flows can be isolated, gravitational settling or sedimentation is nearly eliminated, and temporal and spatial scales can be expanded. This document reviews the state of knowledge in microgravity combustion science with the emphasis on NASA-sponsored developments in the current period of 1992 to early 1995. The subjects cover basic research in gaseous premixed and diffusion-flame systems, flame structure and sooting, liquid droplets and pools, and solid-surface ignition and flame spread. They also cover applied research in combustion synthesis of ceramic-metal composites, advanced diagnostic instrumentation, and on-orbit fire safety. The review promotes continuing research by describing the opportunities for Principal Investigator participation through the NASA Research Announcement program and the available NASA Lewis Research Center ground-based facilities and spaceflight accommodations. This review is compiled by the members and associates of the NASA Lewis Microgravity Combustion Branch, and it serves as an update of two previous overview reports.

Ross, Howard D.↗

Reformulating Non-Monotonic Theories for Inference and Updating

We aim to help build programs that do large-scale, expressive non-monotonic reasoning (NMR): especially, 'learning agents' that store, and revise, a body of conclusions while continually acquiring new, possibly defeasible, premise beliefs. Currently available procedures for forward inference and belief revision are exhaustive, and thus impractical: they compute the entire non-monotonic theory, then re-compute from scratch upon updating with new axioms. These methods are thus badly intractable. In most theories of interest, even backward reasoning is combinatoric (at least NP-hard). Here, we give theoretical results for prioritized circumscription that show how to reformulate default theories so as to make forward inference be selective, as well as concurrent; and to restrict belief revision to a part of the theory. We elaborate a detailed divide-and-conquer strategy. We develop concepts of structure in NM theories, by showing how to reformulate them in a particular fashion: to be conjunctively decomposed into a collection of smaller 'part' theories. We identify two well-behaved special cases that are easily recognized in terms of syntactic properties: disjoint appearances of predicates, and disjoint appearances of individuals (terms). As part of this, we also definitionally reformulate the global axioms, one by one, in addition to applying decomposition. We identify a broad class of prioritized default theories, generalizing default inheritance, for which our results especially bear fruit. For this asocially monadic class, decomposition permits reasoning to be localized to individuals (ground terms), and reduced to propositional. Our reformulation methods are implementable in polynomial time, and apply to several other NM formalisms beyond circumscription.

Grosof, Benjamin N.↗

Substructure System Identification for Finite Element Model Updating

This report summarizes research conducted under a NASA grant on the topic 'Substructure System Identification for Finite Element Model Updating.' The research concerns ongoing development of the Substructure System Identification Algorithm (SSID Algorithm), a system identification algorithm that can be used to obtain mathematical models of substructures, like Space Shuttle payloads. In the present study, particular attention was given to the following topics: making the algorithm robust to noisy test data, extending the algorithm to accept experimental FRF data that covers a broad frequency bandwidth, and developing a test analytical model (TAM) for use in relating test data to reduced-order finite element models.

Craig, Roy R., Jr.↗