Search NASA⌕ Search

SEARCH · Search NASA

Results for “uranium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Direct Extraction of Uranium-Lanthanide Oxides in Tributyl Phosphate

Abstract Direct extraction of used nuclear fuel (UNF) in an organic solution could be more efficient than the previous practice with aqueous solutions. However, the UNF would need to be treated via voloxidiation before being processed using solvent extraction. The voloxidation process can form oxide and/or nitrate compounds. This work investigated the dissolution of uranium/lanthanide oxides in 30 vol % TBP diluted in dodecane (pre-equilibrated with 4 M nitric acid) in a glass reactor with air sparging to ascertain the uranium/lanthanide oxide dissolution behavior prior to scaling the process. The uranium/lanthanide oxides were prepared by co-precipitating uranium/lanthanide nitrates with hydroxide and then calcined to form a mixed oxide. While the relative concentrations of the lanthanides are not representative of used nuclear fuel, the neodymium and erbium allowed ease of tracking dissolution with visible spectroscopy. Cerium was used as a surrogate for plutonium. The dissolution rate of the oxides was similar but incomplete. A miniscule amount of cerium, as cerium oxide, took several months to slowly dissolve; however, when co-precipitated with uranium and other lanthanides, a significant amount of cerium dissolved readily.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Toward machine learning interatomic potentials for modeling uranium mononitride

Uranium mononitride (UN) is a promising accident-tolerant fuel because of its high fissile density and high thermal conductivity. In this study, we developed the first machine learning interatomic potentials for reliable atomic-scale modeling of UN at finite temperatures. We constructed a training set using density functional theory (DFT) calculations that was enriched through an active learning procedure, and two neural network potentials were generated. Both potentials successfully reproduce key thermophysical properties of interest, such as temperature-dependent lattice parameter, specific heat capacity, and bulk modulus. We also evaluated the energy of stoichiometric defect reactions and defect migration barriers and found close agreement with DFT predictions, demonstrating that our potentials can be used for modeling defects in UN. Additional tests provide evidence that our potentials are reliable for simulating diffusion, noble gas impurities, and radiation damage.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Crystal structure, compressibility, and thermal expansion of uranium mononitride

The behavior of the uranium mononitride (UN) crystal structure at nonambient conditions is disputed, with studies proposing various mutually exclusive distortions and transformations of the conventional face-centered-cubic structure at extreme temperatures and pressures. Here, in this study, we investigated the UN lattice with diamond anvil cell x-ray diffraction experiments at pressures up to 92 GPa and with density functional theory calculations at temperatures up to 1000 K and pressures up to 90 GPa. We determined that while the UN structure is nearly cubic at ambient conditions, its lattice angle (𝛼) varies as a function of pressure and temperature, meaning its structure can be more precisely described as face-centered-rhombohedral with 𝛼 ≈ 90∘. Over the range of conditions we investigated, UN exhibits a single, isostructural phase transition at ≈ 35 GPa, where 𝛼 collapses to ≈ 86°. Measurements and calculations agree that the compressibility of UN increases significantly beyond this transition, with the bulk modulus falling from ≈ 200 GPa in the low-pressure phase to 121 ± 3 GPa (according to calculations) or 58 ± 4 GPa (according to measurements) in the high-pressure phase. Our measurements also allowed us to constrain the bulk modulus of 𝛼−U 2 ⁢N 3 to 240 ± 10 GPa.

36 MATERIALS SCIENCE↗
DOE OSTI2024

IER 499 Thermal Epithermal eXperiments with Highly Enriched Uranium and Chlorine (TEX-Cl) CED-3B

The Thermal Epithermal eXperiments (TEX) with highly enriched uranium (HEU) and chlorine (TEX Cl) experiment, IER 499, was executed at the National Criticality Experiments Research Center (NCERC) in July - August 2024 by the following members of the Advanced Nuclear Technology Group at Los Alamos National Laboratory: Theresa Cutler, Peter Brain, Travis Grove, Rene Sanchez, Alex McSpaden, Kristin Stolte, Zach Lemke, Kenny Valdez, Charlie Kiehne. The experiment was born out of necessity for nuclear criticality safety validation of the capture cross section of 35 Cl. This cross section plays an important role in nuclear criticality safety at both Los Alamos National Laboratory (LANL) and the Y-12 National Security Complex. This work sought to validate the Cl capture cross section through the construction and measurement of three separate critical configurations.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

TEX-Cl: Integral Experiment Execution of Thermal/Epithermal eXperiments using Highly Enriched Uranium with Polyethylene and Chloride Absorbers

This report documents the experimental configurations and measurements performed for IER-499, TEX with chlorine (TEX-Cl). TEX-Cl is a variant of the TEX-HEU campaign and utilizes highly enriched uranium fuel, high-density polyethylene (HDPE) moderators and reflectors, and interstitial NaCl salt absorbers. These experiments probe the chlorine (from the sodium chloride) absorption cross section in the thermal and intermediate neutron energy regimes, with a small portion in the fast neutron energy regime. Three configurations were selected by maximizing the sensitivity in k eff to the needs of Y-12 for their electrorefining operations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Studies of Helium Behavior in Uranium Hexafluoride

Several issues have arisen from experimental observations and/or theoretical postulation related to the behavior of helium in uranium hexafluoride (UF 6 ) matrices and how it may impact the ability to use this noble gas to quantify the fill date of the cylinder. A series of experiments was conducted to address several such issues, and the results and implications are reported here. Two issues relate to bias in the helium measurement due to ambient air from extraneous sources such as atmospheric air or from potential holdup in a large, activated alumina chemical trap. These issues are really a question of differential retention of helium versus three other inert gas isotopes (representative of other noble gases found in air) used as a calibration for air in leakage. Discernable bias was not detected in either case. Another issue had to do with helium potentially brought into the cylinder by a liquid UF 6 fill and subsequently released as the material solidifies and/or during storage. The solubility of helium in liquid UF 6 was measured to investigate this theory. The experiment quantified the potential magnitude of the initial helium contribution if present. The final issue was that of retention of helium in solid UF 6 . Investigation of this theory necessitated quantifying both the solubility and the diffusivity of helium in UF 6 . In one experiment, the solubility was measured at cryogenic temperature, allowing quantification of helium in solid UF 6 such as would be found in a cold trap. In a second experiment, transport of helium into and through a macroscopic plug of solid UF 6 was examined. The transport was very slight although apparently detectible. Effectively, only an upper limit to the transport could be determined, but that limit implied that helium holdup in solid UF 6 is a real possibility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Refining Methods to Determine the Isotopic Composition of Uranium Particles by Laser Ablation MC-ICP-MS

We report on efforts to mitigate the generation of isotopic anomalies during the ablation of micrometer-sized uranium oxide particles and analysis by MC-ICP-MS. The results of testing on particles of U200 indicate that laser fluence and frequency can affect isotopic data produced by laser ablation, but no settings were tested that could eradicate the signal spiking effect and generation of anomalous isotopic data for 234U/238U and 236U/238U. These anomalies are more frequent in samples with higher 235U enrichments, which is expected given their higher abundances of 234U and 236U. Of the standards tested here, only U005-A was anomaly-free. Efforts to compare the laser traces for particles with normal and anomalous isotopic compositions showed subtle differences in the behavior of the 234U/238U and 236U/238U ratios. However, it would be challenging to identify anomalous data points from a population of unknowns using this distinction, i.e., this is unlikely to be diagnostic. Thus, using current analytical hardware, we cannot eradicate the signal spiking phenomenon and cannot unambiguously identify isotopic anomalies from laser ablation traces. Ultimately, laser ablation ICP-MS would either require dramatic improvement to the ablation process and generation of more homogenous aerosols and/or improvements to detector electronics to identify and correct for the spiking phenomenon. Even if the reliability of the technique could be improved, a broader question to address is whether current data quality is of a high enough standard for laser ablation MC-ICP-MS to be used as a complementary technique to LG-SIMS for Safeguards.

organic↗
DOE OSTI2025

Plasma Flow Reactor Investigation into Nucleation of Uranium Oxide on Silica Substrates to Better Understand Fallout Formation

Understanding particulate formation in nuclear debris is critical for predicting fallout transport after a nuclear event. Improved characterization of fallout formation and transport could lead to better guidance for emergency response in a post-detonation scenario. By analyzing how U-oxides nucleate onto different forms of SiO 2 (crystalline and amorphous), we can gain insight into how entrained environmental materials may incorporate into fallout. In this experiment a Plasma Flow Reactor (PFR), was used to replicate the high temperature and extreme flow conditions in a nuclear fireball. Uranyl nitrate was injected into the plasma, and PFR-generated Uranium oxides were allowed to condense onto amorphous (nanoparticles of varying sizes) or crystalline (quartz) SiO 2 substrates. SiO 2 substrates were characterized before and after U-oxide deposition using Scanning Electron Microscopy (SEM) based techniques (i.e. EDS) in order to characterize how U-oxides may nucleate onto these substrates. After a collection time of 4 minutes at an RF coil distance of 25cm, both the amorphous SiO 2 nanoparticles and the crystalline structures demonstrated dendritic nucleation of U-oxide species as identified by SEM/EDS.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Safeguards Technology Program FY2026 Mid-Year Report for Project WBS# 24.1.3.3: Development of Procedures for Th-U Radiochronometry of Uranium Particles by LG-SIMS

Implementing 230 Th- 234 U radiochronometry of environmental uranium particles by large geometry secondary ion mass spectrometry (LG-SIMS) requires assessment, validation, and technical support before safeguards conclusions can be drawn from the information. This project investigates the most challenging aspects of LG-SIMS particle radiochronometry 230 Th- 234 U measurements through a collaboration between LANL and NIST, to provide best practices and procedures for determining high quality ages with optimized uncertainties. This includes exploration of reducing detector backgrounds, investigating the best ways to report uncertainties, and establishing recommended instrument setups.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2025

Unattended Monitoring of Uranium Holdup with Scintillating Fibers

This work evaluated the use of scintillating fiber (SciFi) radiation sensors as a cost-effective, unattended monitoring technique for uranium holdup accumulation in reprocessing equipment. With ruggedized packaging and an outer diameter of less than 1 cm, scintillating fibers offer deployment flexibility. Additionally, plastic scintillating fibers coupled with standard optical fibers provide an affordable option to monitor locations kilometers away from a localized control room or data acquisition (DAQ) system. These combinations of characteristics along with their relatively low manufacturing costs make scintillating fibers ideal for installation at key measurement points such as pipes, valves, and filtration systems.

46 - INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AN↗
DOE OSTI2025

Investigation of In Situ and Ex Situ Passivation of Pyrophoric Uranium–Niobium Alloy Powder

This work evaluates the effectiveness of in situ and ex situ passivation methods for mitigating the pyrophoricity of uranium–6 wt.% niobium spherical powders produced via the hydride–dehydride process coupled with plasma spheroidization. Oxide layer thickness was characterized using STEM/EDX, and pyrophoricity was assessed by a UN-recommended test method, which involves directly dropping the powders in the air. In situ passivation, performed by introducing flowing oxygen during spheroidization, produced oxide layers ranging from tens to hundreds of nanometers but resulted in inconsistent pyrophoricity mitigation at lower oxygen flow rates. Ex situ passivation, achieved by slow oxygen exposure over several months, formed uniform oxide layers of approximately 20 nm and consistently mitigated pyrophoricity. Despite requiring higher bulk oxygen content, in situ passivation enables faster processing and control of oxygen, while ex situ passivation achieves superior oxide uniformity with lower oxygen incorporation. These findings highlight the trade-offs between passivation methods and provide a foundation for improving the safety and scalability of reactive metal powder production.

U-6Nb↗
DOE OSTI2025

Supporting Data: Inverse Trans Influence and Uranium-Arene σ-Bonding Drive Molecular Geometry: Ligand Modification from Hard to Soft Flips the Oxide from Axial to Equatorial

Supporting Computational Data from the manuscript titled "ITI and Uranium-Arene s-Bonding Drive Molecular Geometry: Ligand Modification from Hard to Soft Flips the Oxide from Axial to Equatorial" by Benedikt Kestel, Daniel Pividori, Sabyasachi Roy Chowdhury, Frank W. Heinemann, Bess Vlaisavljevich, and Karsten Meyer published in J. Am. Chem. Soc. (DOI: 10.1021/jacs.5c05029).

Chowdhury, Sabyasachi Roy [Department of Chemistry↗
DOE OSTI2026

Supporting Data: Synthesis and Computational Analysis of Uranium(III)-Pnictogen Bonds

This repository contains the supporting data for the publication titled "Synthesis and Computational Analysis of Uranium(III)-Pnictogen Bonds" by Lauren M. Lopez, Diana Perales, Allison N. Smolek, Matthias Zeller, Bess Vlaisavljevich and Suzanne C. Bart. The manuscript associated with these data was published in J. Am. Chem. Soc. (DOI: 10.1021/jacs.5c19802). For readers only seeking the XYZ files associated with the publication, a second zipped folder called "coordinates.tgz" is included. The README.txt file describes the contents of the folder containing the input and output files.

Vlaisavljevich, Bess [Department of Chemistry; Uni↗
NASA NTRS1968

Ignition of binary alloys of uranium

Experiments determine the effect of alloying additives on the ignition of uranium. Data on oxidation rates, ignition temperatures, and burning curves are provided in the report.

Baker, L., Jr.↗