SEARCH · Search NASA

Results for “utility programs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

All sources NASA NTRS DOE OSTI

NASA NTRS1973

Intercomputer transfer in full precision of arbitrary data on magnetic tape employing NASTRAN user tape format

A description is presented of two new utility programs which implement the transfer, in full precision, of arbitrary data (matrices or tables) between any of the three NASTRAN operative computers without the handling of large card decks. These computers include the CDC 6000 series, the IBM 360-370 series, and the Univac 1100 series. The data may be generated by NASTRAN or by another computer program if the NASTRAN user tape format is employed.

Rogers, J. L., Jr.↗

NASA NTRS1973

Electronic control circuits: A compilation

A compilation of technical R and D information on circuits and modular subassemblies is presented as a part of a technology utilization program. Fundamental design principles and applications are given. Electronic control circuits discussed include: anti-noise circuit; ground protection device for bioinstrumentation; temperature compensation for operational amplifiers; hybrid gatling capacitor; automatic signal range control; integrated clock-switching control; and precision voltage tolerance detector.

Source record↗

NASA NTRS1974

The October 1973 NASA mission model analysis and economic assessment

Results are presented of the 1973 NASA Mission Model Analysis. The purpose was to obtain an economic assessment of using the Shuttle to accommodate the payloads and requirements as identified by the NASA Program Offices and the DoD. The 1973 Payload Model represents a baseline candidate set of future payloads which can be used as a reference base for planning purposes. The cost of implementing these payload programs utilizing the capabilities of the shuttle system is analyzed and compared with the cost of conducting the same payload effort using expendable launch vehicles. There is a net benefit of 14.1 billion dollars as a result of using the shuttle during the 12-year period as compared to using an expendable launch vehicle fleet.

Source record↗

NASA NTRS1973

Development of special lubricants for ball bearings operating in vacuum

A ball bearing life test program was performed to obtain data on the efficiencies of various lubricated and self-lubricating ball retainer systems for instrument bearings in a vacuum environment. The program utilized light to moderate radial loads at relatively low speeds on a NASA-GSFC designed and supplied test rig. Several systems were found which gave acceptable bearing life under the test conditions used, but the most consistent low running torques after testing resulted from oil lubrication.

Source record↗

NASA NTRS1973

NASA technology utilization applications

The work is reported from September 1972 through August 1973 by the Technology Applications Group of the Science Communication Division (SCD), formerly the Biological Sciences Communication Project (BSCP) in the Department of Medical and Public Affairs of the George Washington University. The work was supportive of many aspects of the NASA Technology Utilization program but in particular those dealing with Biomedical and Technology Application Teams, Applications Engineering projects, new technology reporting and documentation and transfer activities. Of particular interest are detailed reports on the progress of various hardware projects, and suggestions and criteria for the evaluation of candidate hardware projects. Finally some observations about the future expansion of the TU program are offered.

Source record↗

NASA NTRS1974

Analytical techniques and instrumentation, a compilation

Procedures for conducting materials tests and structural analyses of aerospace components are presented as a part of the NASA technology utilization program. Some of the subjects discussed are as follows: (1) failures in cryogenic tank insulation, (2) friction characteristics of graphite and graphite-metal combinations, (3) evaluation of polymeric products in thermal-vacuum environment, (4) erosion of metals by multiple impacts with water, (5) mass loading effects on vibrated ring and shell structures, (6) nonlinear damping in structures, and (7) method for estimating reliability of randomly excited structures.

Source record↗

NASA NTRS1974

SIRU utilization. Volume 1: Theory, development and test evaluation

The theory, development, and test evaluations of the Strapdown Inertial Reference Unit (SIRU) are discussed. The statistical failure detection and isolation, single position calibration, and self alignment techniques are emphasized. Circuit diagrams of the system components are provided. Mathematical models are developed to show the performance characteristics of the subsystems. Specific areas of the utilization program are identified as: (1) error source propagation characteristics and (2) local level navigation performance demonstrations.

Musoff, H.↗

NASA NTRS1973

An iterative approach to the feature selection problem

The B-average divergence for m-distinct classes, resulting from the linear transformation y = Bx, is proposed as a feature selection criterion, where B is a k by n matrix of rank k not greater than n. It is shown that if the B-average divergence resulting from B is large enough, then the probability of misclassification, considered as a function f the class of all k by n matrices, is essentially minimized by B. A computer program, utilizing a gradient procedure, is developed to numerically maximize the B-average divergence and results are presented for the Cl flight line. For this example, corresponding to 9-distinct classes, most of the discriminatory information is found to lie in a 3-dimensional subspace, defined by an appropriately chosen 3 by 12 matrix B.

Decell, H. P., Jr.↗

NASA NTRS1974

Investigation of Northrop F-5A wing buffet intensity in transonic flight

A flight test and data processing program utilizing a Northrop F-5A aircraft instrumented to acquire buffet pressures and response data during transonic maneuvers is discussed. The data are presented in real-time format followed by spectral and statistical analyses. Also covered is a comparison of the aircraft response data with computed responses based on the measured buffet pressures.

Chintsun, H.↗

NASA NTRS1975

Wall mounted heat exchanger characterization

Analytical models are presented for describing the heat and mass transfer and the energy distribution in the contents of a cryogenic propellant tank, under varying gravity levels. These models are used to analytically evaluate the effectiveness of a wall heat exchanger as a means of controlling the pressure in the tank during flight and during fill operations. Pressure and temperature histories are presented for tanks varying in size from 4 to 22.5 feet in diameter and gravity levels from 0-1. Results from the subscale test program, utilizing both non-cryogenic and cryogenic fluid, designed to evaluate a tank wall heat exchanger are described and compared with the analytical models. Both the model and test results indicate that a passive tank wall heat exchanger can effectively control tank pressure. However, the weight of such a system is considerably higher than that of an active mixer system.

Bullard, B. R.↗

NASA NTRS1974

Technology pipeline

After ten years of evolution, the technology utilization program now uses three basic and complementary technology transfer mechanisms: publication, technical assistance dissemination, and application demonstrations. The marketing of NASA technology and industrial applications is discussed.

Voris, R. M.↗

NASA NTRS1974

Transfer of space technology to industry

Some of the most significant applications of the NASA aerospace technology transfer to industry and other government agencies are briefly outlined. The technology utilization program encompasses computer programs for structural problems, life support systems, fuel cell development, and rechargeable cardiac pacemakers as well as reliability and quality research for oil recovery operations and pollution control.

Hamilton, J. T.↗

NASA NTRS1975

Development of a flow visualization apparatus

The use of an optical flow visualization device for studying convection flow patterns was investigated. The investigation considered use of a shadowgraph, schlieren and other means for visualizing the flow. A laboratory model was set up to provide data on the proper optics and photography procedures to best visualize the flow. A preliminary design of a flow visualization system is provided as a result of the study. Recommendations are given for a flight test program utilizing the flow visualization apparatus.

Spradley, L. W.↗

NASA NTRS1975

Analytic solution for low thrust out of ecliptic mission design

Description of an analytic trajectory solution for low thrust out of ecliptic mission design based on the two-variable asymptotic expansion technique. A practical steering program utilizing normal thrusting symmetrical about the nodes is assumed. A two-term expansion yields an essentially exact solution of the problem which is in a form suitable for evaluation on small desk-top computers. It is shown that for a circular base orbit at 1 AU, a 15-kw solar electric system with a specific impulse of 3000 sec is capable of delivering an 1100-kg net payload to a heliographic latitude of about 63 deg.

Flandro, G. A.↗

NASA NTRS1974

Bringing space technology down to earth

The direct transfer of space technology to terrestial applications is demonstrated by the use of fuel cells to augment existing electric power-generation facilities. The role of NASA's Technology Utilization Program is discussed in regard to indirect transfer of technology. The Tech Brief program for identifying and reporting innovations, the regional dissemination centers, and the Applications Teams working with other government agencies and the medical community are described. Projects discussed include the development of a lightweight breathing apparatus for firemen, a practical method for separating nonferrous metals from automobile scrap, and a rechargeable heart pacemaker.

Gray, E. Z.↗

NASA NTRS1975

A study of air-to-ground sound propagation using an instrumented meteorological tower

The results of an exploratory NASA study, leading to a better understanding of the effects of meteorological conditions on the propagation of aircraft noise, are reported. The experimental program utilized a known sound source fixed atop an instrumented meteorological tower. The basic experimental scheme consisted of measuring the amplitude of sound radiated toward the ground along a line of microphones fixed to a tower guy wire. Experimental results show the feasibility of this approach in the acquisition of data indicating the variations encountered in the time-averaged and instantaneous amplitudes of propagated sound. The investigation included a consideration of ground reflections, a comparison of measured attenuations with predicted atmospheric absorption losses, and an evaluation of the amplitude fluctuations of recorded sound pressures.

Kasper, P. K.↗

NASA NTRS1975

Vibration simulator studies for the development of passenger ride comfort criteria

A test program to determine the total discomfort associated with vehicle vibration is described. The program utilizes a three-degree-of-freedom vibration simulator to determine the effects of multifrequency and multiaxis vibration inputs. The approach to multifrequency vibration includes a separate consideration of the discomfort associated with each frequency component or band of the total spectrum and a subsequent empirical weighting of the discomfort components of these frequency bands when in various random combinations. The results are in the form of equal discomfort curves that specify the discomfort associated with discrete frequencies between 1 and 30 Hz and different acceleration levels. These results provide detailed information of the human discomfort response to increases in acceleration level for each frequency investigated. More importantly, the results provide a method for adding the discomfort associated with separate frequencies to give a total typification of the discomfort of a random spectrum of vibration.

Dempsey, T. K.↗

NASA NTRS1975

INPUTB: A thermal/structural data interface program for 2-dimensional and 3-dimensional interpolation

A computer program (INPUTB) for interpolation in both space and time, and based on a linear interpolation scheme using simplex spatial regions is described. The program was developed to provide data interfacing between the output from thermal analyzers and the input to the BOPACE 3-D program. The INPUTB interpolator is of a general nature and could be used for other tasks. The INPUTB program utilizes temperature values which are given at some sequence of time for a list of strategically located thermal nodes. It operates on these values by performing a double interpolation to provide temperature values at another desired sequence of times for a list of structural nodes.

Vos, R. G.↗