Search NASA⌕ Search

SEARCH · Search NASA

Results for “water availability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Evaluating Lunar Water Processing System Model Configurations for Small Scale Oxygen and Hydrogen Production Within JAXA’s ISRU Technology Demonstration Plant

In-Situ Resource Utilization (ISRU) refers to novel methods of extracting and processing local resources for use in life support and propulsion systems, reducing or eliminating the required consumables to be transferred from Earth. Current estimates of water-ice availability embedded in regolith within the Moon’s permanently shadowed regions (PSR’s)range between 1-5% by weight. However, the composition and characteristics of the “wet” regolith is unknown. Alternate ISRU excavation techniques and Concept of Operations (ConOps) must be explored to optimize surface system operations based on these factors. To assess the feasibility of different ISRU subsystem technologies and compare system architecture configurations, an interchangeable system model was generated to incorporate technologies spanning excavation of raw materials to storage of products and determine optimal arrangement of total system processing needs. Total Mass, Volume, and Power (M/V/P) requirements were computed for 168 design iterations of this water processing plant.

ISRU↗

Evaluating Lunar Water Processing System Model Configurations for Small Scale Oxygen and Hydrogen Production Within JAXA'S ISRU Technology

Introduction: In-Situ Resource Utilization (ISRU) refers to novel methods of extracting and processing local resources for use in life support and propulsion systems, reducing or eliminating the required consumables to be transferred from Earth. Current estimates of water-ice availability embedded in regolith within the Moon’s permanently shadowed regions (PSR’s) range between 1-5% by weight. However, the composition and characteristics of the “wet” regolith is unknown. Alternate ISRU excavation techniques and Concept of Operations (ConOps) must be explored to optimize surface system operations based on these factors. To assess the feasibility of different ISRU subsystem technologies and compare system architecture configurations, an interchangeable system model was generated to incorporate technologies spanning excavation of raw materials to storage of products and determine optimal arrangement of total system processing needs. Total Mass, Volume, and Power (M/V/P) requirements were computed for 168 design iterations of this water processing plant. System Model: In FY24, the System Engineering and Integration (SE&I) ISRU Modeling and Analysis (SIMA) team developed a lunar water processing system model using the Mission Analysis and Integration Tool (MAIT) to estimate the M/V/P for ISRU subsystems operating under a wide range of Hydrogen (H2) and Oxygen (O2) production targets for the Space Technology Mission Directorate (STMD) [1]. Based on Japan Aerospace Exploration Agency’s (JAXA) surface operational requirements, this system architecture was modified to include the ability to excavate consolidated icy regolith (versus granular ice excavation using Kennedy Space Center’s (KSC) ISRU Pilot Excavator, IPEx) and explore the feasibility of processing the lunar water both inside and outside of the PSR. For the consolidated icy regolith case study, excavation was performed via a mobility transport chassis outfitted with The Regolith Ice Drill for Exploring New Terrain (TRIDENT) for drilling [2] and the Cold Operable Lunar Deployable Arm (COLDArm) [3] for regolith transfer. The system model determines the required rover and payload. M/V/P to handle the required regolith processing rates. The regolith is then sorted and heated to sublimate the ice (via an auger dryer). The exiting high temperature, low pressure vapor is cleaned of volatiles (via cold trap) and electrolyzed to produce H2 and O2. These products are then dried, liquified with 20 K and 90 K cryocoolers (for H2 and O2, respectively), and stored in cylindrical tanks. Study Goals: Due to the different ConOps options of regolith transport to the ridge for processing versus processing it directly inside the PSR, as well as the unknown regolith/water-ice composition, new excavation techniques and their power configurations are being evaluated within a ISRU system architecture for production targets less than NASA’s pilot plant (1 mT). This analysis investigates the feasibility of numerous excavation techniques, power architectures, and logistical operations and determines an optimal system configuration with regards to M/V/P. It aims to investigate which parameters, both locally and globally, have the greatest effect on each subsystem within the plant. This can be used to identify the most critical components of the plant, and guide future decisions on allocating funding for research and development. The results from this study may provide subsystem developers with appropriate interfaces with excavation subsystems and downstream processes, and assessing the overall feasibility of each excavation technique, power architecture, and logistical timeframe. References: [1] Carlson, A. et. al. (2024) ICES. [2] Zacny, K., et. al. (2024) “ASCE Earth and Space”. [3] McCormick, R., et. Al. (2024) IEEE Xplore.

ISRU↗

Arctic PBL Cloud Height and Motion Retrievals from MISR and MINX

How Arctic clouds respond and feedback to sea ice loss is key to understanding of the rapid climate change seen in the polar region. As more open water becomes available in the Arctic Ocean, cold air outbreaks (aka. off-ice flow from polar lows) produce a vast sheet of roll clouds in the planetary boundary layer (PBl). The cold air temperature and wind velocity are the critical parameters to determine and understand the PBl structure formed under these roll clouds. It has been challenging for nadir visible/IR sensors to detect Arctic clouds due to lack of contrast between clouds and snowy/icy surfaces. In addition) PBl temperature inversion creates a further problem for IR sensors to relate cloud top temperature to cloud top height. Here we explore a new method with the Multiangle Imaging Spectro-Radiometer (MISR) instrument to measure cloud height and motion over the Arctic Ocean. Employing a stereoscopic-technique, MISR is able to measure cloud top height accurately and distinguish between clouds and snowy/icy surfaces with the measured height. We will use the MISR INteractive eXplorer (MINX) to quantify roll cloud dynamics during cold-air outbreak events and characterize PBl structures over water and over sea ice.

Wu, Dong L.↗

Cholecystokinin actions in the parabrachial nucleus: effects on thirst and salt appetite

The present study investigated the effects of bilateral injections of the nonselective CCK receptor antagonist proglumide or CCK-8 into the lateral parabrachial nuclei (LPBN) on the ingestion of 0.3 M NaCl and water induced by intracerebroventricular injection of ANG II or by a combined treatment with subcutaneous furosemide (Furo) + captopril (Cap). Compared with the injection of saline (vehicle), bilateral LPBN injections of proglumide (50 micrograms . 200 nl-1 . site-1) increased the intake of 0.3 M NaCl induced by intracerebroventricular ANG II (50 ng/1 microliter). Bilateral injections of proglumide into the LPBN also increased ANG II-induced water intake when NaCl was simultaneously available, but not when only water was present. Similarly, the ingestion of 0.3 M NaCl and water induced by the treatment with Furo (10 mg/kg) + Cap (5 mg/kg) was increased by bilateral LPBN proglumide pretreatment. Bilateral CCK-8 (0.5 microgram . 200 nl-1 . site-1) injections into the LPBN did not change Furo + Cap-induced 0.3 M NaCl intake but reduced water consumption. When only water was available after intracerebroventricular ANG II, bilateral LPBN injections of proglumide or CCK-8 had no effect or significantly reduced water intake compared with LPBN vehicle-treated rats. Taken together, these results suggest that CCK actions in the LPBN play a modulatory role on the control of NaCl and water intake induced by experimental treatments that induce hypovolemia and/or hypotension or that mimic those states.

Non-NASA Center↗

Deep Ocean Warming Assessed from Altimeters, GRACE, 3 In-situ Measurements, and a Non-Boussinesq OGCM

Observational surveys have shown significant oceanic bottom water warming, but they are too spatially and temporally sporadic to quantify the deep ocean contribution to the present-day sea level rise (SLR). In this study, altimetry sea surface height (SSH), Gravity Recovery and Climate Experiment (GRACE) ocean mass, and in situ upper ocean (0-700 m) steric height have been assessed for their seasonal variability and trend maps. It is shown that neither the global mean nor the regional trends of altimetry SLR can be explained by the upper ocean steric height plus the GRACE ocean mass. A non-Boussinesq ocean general circulation model (OGCM), allowing the sea level to rise as a direct response to the heat added into the ocean, is then used to diagnose the deep ocean steric height. Constrained by sea surface temperature data and the top of atmosphere (TOA) radiation measurements, the model reproduces the observed upper ocean heat content well. Combining the modeled deep ocean steric height with observational upper ocean data gives the full depth steric height. Adding a GRACE-estimated mass trend, the data-model combination explains not only the altimetry global mean SLR but also its regional trends fairly well. The deep ocean warming is mostly prevalent in the Atlantic and Indian oceans, and along the Antarctic Circumpolar Current, suggesting a strong relation to the oceanic circulation and dynamics. Its comparison with available bottom water measurements shows reasonably good agreement, indicating that deep ocean warming below 700 m might have contributed 1.1 mm/yr to the global mean SLR or one-third of the altimeter-observed rate of 3.11 +/- 0.6 mm/yr over 1993-2008.

sea level↗

Beta-FeOOH, akaganeite, in lunar rocks

Experiments were conducted to determine the nature of the alteration process in lunar rocks. Mixtures of 10 wt.% Fe + 10 wt.% FeCl2 + 80 wt.% basalt (terrestrial) were pelletized and allowed to set for 48 hrs at 25 C, at 40% and at 100% relative humidity. The end products were examined by reflected-light microscopy and by X-ray diffraction. The degree of reaction appears to depend upon the amount of FeCl2, the availability of water and the Ni content of the metallic Fe. The experiments showed the extremely rapid rate at which the oxyhydration can occur in air and that the product is beta-FeOOH. The data from the FeOOH mineral in rock 66095 were compared with those obtained from synthetic beta-FeOOH and found to be identical. The 'rust' in the Apollo 16 rocks could result from oxyhydration of the samples, caused by water vapor contamination, all or part of which occurred in the Apollo spacecraft and/or upon return to earth. The akageneite (beta-FeOOH) in lunar rocks could be entirely of terrestrial origin as originally suggested by Taylor et al. (1973).

Taylor, L. A.↗

Analysis of hydrological features of portions of the Lake Ontario basin using Skylab and aircraft data

The author has identified the following significant results. S190A and S190B photography proved to be useful for mapping large scale geomorophological features, and for assessing water depth and water quality. Available S192 data were affected by low frequency noise caused by diode light. Hydrological features were classified, and upland green herbaceous vegetation was separated into several classes based on percent vegetation cover. A model for estimating surface soil moisture based on red and near infrared reflectance data was developed and subsequently implemented.

Polcyn, F. C.↗

Alteration of glass as a possible source of clay minerals on Mars

Thermodynamic calculations show that, under present Martian surface conditions, favorable gas-solid weathering products of feldspar glasses should include beidellites (clays of the montmorillonite series) + carbonates + quartz. The gas-solid weathering of mafic silicate glass ( of volcanic or impact origin) may similarly favor the production of metastable Fe-rich montmorillonite clays. Simple mass-balance calculations suggest that gas-solid weathering of Martian proto-regolith containing 10% glass could conceivably produce a global blanket of clays at a rate of at least 0.4 cm/b.y. The production rate should be expected to increase significantly with the glass content and rate of reworking of the proto-regolith and with the availability of water. Complete extraction of altered glass from a lunar-like proto-regolith might yield a global Martian clay blanket about 10-100 cm in thickness.

Gooding, J. L.↗

The environmental vegetation index: A tool potentially useful for arid land management

The NOAA-6 AVHRR data sets acquired over South Texas and Mexico during the spring of 1980 and after Hurricane Allen passed inland are analyzed. These data were processed to produce the Gray-McCrary Index (GMI's) for each pixel location over the selected area, which area contained rangeland and cropland, both irrigated and nonirrigated. The variations in the GMI's appear to reflect well the availability of water for vegetation. The GMI area maps are shown to delineate and to aid in defining the duration of drought; suggesting the possibility that time changes over a selected area could be useful for irrigation management.

Gray, T. I., Jr.↗

Outer planet satellite return missions using in situ propellant production

In situ production of oxygen and oxygen with hydrogen for utilization as return propellant from the Galilean satellites has been investigated. Europa has emerged as the preferred landing sight because of the availability of water ice and its surface temperature. When oxygen is used with methane transported from earth, a Europa sample return mission requires 4000 kg less estimated earth launch mass than a vehicle using space storable propellant. Neither methane nor oxygen require active refrigeration at Europa. When oxygen and hydrogen are both utilized to form the primary sample return propellant, the required processor mass increases, but the estimated earth launch mass requirement is reduced by an additional 550 kg.

Ash, R. L.↗

Solar-Pond Resources in the United States

Report describes survey of U.S. salt and brine deposits providing essential information for developers considering use of solar ponds for heat and electricity production. Sites classified as areas of ponds about 1 km2, or larger, accommodated in which salt, clay, and water are available.

Hurick, M. G.↗

Diurnal movements of cotton leaves expressed as thermodynamic work and entropy changes

It is pointed out that some important agricultural crops show heliotropic leaf movements. In these species, the proclivity of leaves to orient either perpendicularly or parallel or in some combination of these positions with respect to the sun is controlled by the leaf turgor and the availability of water. Such an orientational response is particularly noticeable for cotton. Schutt et al. (1985) have detailed leaf trajectories using three angles. The present investigation applies the three-angle representation to leaf trajectory mapping and to the calculation of the phase angle 'gamma' between the individual leaf normals and the solar direction. Using gamma, the thermodynamic work and entropy functions are evaluated and used to distinguish between the behavior of water-stressed and well watered cotton canopies.

Schutt, J. B.↗

Microcomputer-based, statewide, digital land-surface information

The Center for Remote Sensing at Michigan State University is developing a statewide data base of land-surface information on an ERDAS 400 microcomputer system. The raster file structure uses 1 square-kilometer grid cells and contains 633 columns and 733 rows. The initial elements of this data base include (1) augmented Level I land cover; (2) average available soil water capacity; (3) topographic information; and (4) multiple-vector, windward distance to the Great Lakes. Other elements will be added to the data base in the future in order to serve the multidisciplinary needs of the research community at Michigan State University.

Lusch, D. P.↗

The role of regolith adsorption in the transition from early to late Mars climate

Researchers reexamined radiative transfer models of early Mars that were advanced to show the existance of a greenhouse effect. These models were reexamined with regard to the effect that regolith adsorption may have had. It is argued that while the precipitation of carbonates has probably been an important process during Mars history, the rates at which this process could have taken place under early Mars conditions would have dropped sharply once liquid water was fairly scarce. Furthermore, conditions under which liquid water was available may have involved efficient recycling of carbonate so that steady state conditions rather than irreversible CO2 removal prevailed. In contrast, the growth of regolith surface area demands corresponding and predictable CO2 removal from the atmosphere-cap system and is fully capable of terminating any enhanced temperature regime on early Mars in the absence of any other effects.

Fanale, F. P.↗

Stratospheric feedback from continued increases in tropospheric methane

Tropospheric concentrations of methane have increased steadily over the past ten years at an average rate of 16.5 ppbv per year, to a value in January 1988 of 1.69 ppmv. Measurements of CH sub 4 concentrations in air bubbles trapped in ice cores have shown concentrations of about 0.7 ppmv 200 years ago, with little further change for thousands of years before that. Interpolation earlier into this century suggests a concentration of about 1.1 to 1.2 ppmv in the 1940's. The only important pathway believed to be important for transfer of air from the troposphere to the stratosphere in through the tropical tropopause which is cold enough to reduce the mixing ratio of H sub 2 O in that air to about 3 ppmv. The only other major pathway for the delivery of H to the stratosphere is through the simultaneous injection of gaseous CH sub 4 in the same rising air. The formation of clouds in the stratosphere is dependent upon very low temperatures, and generally upon the amount of water vapor available. The possibility of a positive feedback exists, especially in well-oxidized methane air, that clouds are easier to form than earlier. This could mean enhancement of PSCs in both Antarctic and Arctic locations. Additional H sub 2 O in the stratosphere can also add to some of the greenhouse calculations.

Rowland, F. Sherwood↗

Living and working on Mars

The maintenance of a permanent base on Mars is discussed, focusing on the utilization of resources from the Martian environment. The availability of water and oxygen on the planet is assessed. The use of an airshell for compressing the atmosphere, the resources which could be extracted from Martian dirt, and the possibility of terraforming, or altering the Martian environment, are examined.

Mckay, Christopher P.↗

A proposal to demonstrate production of salad crops in the space station mockup facility with particular attention to space, energy, and labor constraints

A desire for fresh vegetables for consumption during long term space missions has been foreseen. To meet this need in a microgravity environment within the limited space and energy available on Space Station requires highly productive vegetable cultivars of short stature to optimize vegetable production per volume available. Special water and nutrient delivery systems must also be utilized. As a first step towards fresh vegetable production in the microgravity of Space Station, several soil-less capillary action media were evaluated for the ability to support growth of two root crops (radish and carrot) which are under consideration for inclusion in a semi-automated system for production of salad vegetables in a microgravity environment (Salad Machine). In addition, productivity of different cultivars of radish was evaluated as well as the effect of planting density and cultivar on carrot production and size. Red Prince radish was more productive than Cherry Belle and grew best on Jiffy Mix Plus. During greenhouse studies, vermiculite and rock wool supported radish growth to a lesser degree than Jiffy Mix Plus but more than Cellular Rooting Sponge. Comparison of three carrot cultivars (Planet, Short n Sweet, and Goldinhart) and three planting densities revealed that Short n Sweet planted at 25.6 sq cm/plant had the greatest root fresh weight per pot, the shortest mean top length, and intermediate values of root length and top fresh weight per pot. Red Prince radish and Short n Sweet carrot showed potential as productive cultivars for use in a Salad Machine. Results of experiments with solid capillary action media were disappointing. Further research must be done to identify a solid style capillary action media which can productively support growth of root crops such as carrot and radish.

Brooks, Carolyn A.↗