Results for “water supply systems” — Page 14

DOE OSTI2021

Life cycle greenhouse gas emissions of ethanol produced via fermentation of sugars derived from shrub willow (Salix ssp.) hot water extraction in the Northeast United States

Abstract Background The amount of carbon dioxide in the atmosphere has been on the rise for more than a century. Bioenergy crops are seen by the Intergovernmental Panel on Climate Change as an essential part of the solution to addressing climate change. To understand the potential impact of shrub willow ( Salix spp . ) crop in the northeast United States, effective and transparent life cycle assessment of these systems needs to occur. Results Here we show, ethanol produced from the fermentation of sugars from hot water extract of willow grown on cropland can sequester 0.012 ± 0.003 kg CO 2eq MJ −1 for a supply system incorporating summer harvest and storage. Despite decreases in soil organic carbon when willow is instead grown on grassland, the produced fuel still can provide significant climate benefits compared to gasoline. Conclusions Shrub willow converted to ethanol can be a carbon negative source of transportation fuel when the electricity and heat required for the conversion process are generated from renewable biomass. The sequestration of carbon in the belowground portion of the plants is essential for the negative GHG balance for cropland and low GHG emissions in grassland.

10 SYNTHETIC FUELS↗

DOE OSTI2023

Modeling the Water Systems of the Western US to Support Climate‐Resilient Electricity System Planning

Abstract Electricity and water systems in the Western US (WUS) are closely connected, with hydropower comprising 20% of total annual WUS generation, and electricity related to water comprising about 7% of total WUS electricity use. Because of these interdependencies, the threat of climate change to WUS resources will likely have compounding electricity impacts on the Western Interconnect grid. This study describes a WUS‐wide water system model with a particular emphasis on estimating climate impacts on hydropower generation and water‐related electricity use, which can be linked with a grid expansion model to support climate‐resilient electricity planning. The water system model combines climatically‐driven physical hydrology and management of both water supply and demand allocation, and is applied to an ensemble of 15 climate scenarios out to 2050. Model results show decreasing streamflow in key basins of the WUS under most scenarios. Annual water‐related electricity use increases up to 4%, and by up to 6% during the summer months, driven by growing agricultural demands met increasingly through a shift toward energy‐intensive groundwater to replace declining surface water. Total annual hydropower generation changes by +5% to −20% by mid‐century but declines in most scenarios, with decreases in summer generation by up to nearly −30%. Water‐related electricity use increases tend to coincide with hydropower generation declines, annually and seasonally, demonstrating the importance of concurrently evaluating the climate signal on both water‐for‐energy and energy‐for‐water to inform planning for grid reliability and decarbonization goals.

13 HYDRO ENERGY↗

NASA NTRS1973

Atmosphere revitalization for manned spacecraft - An assessment of technology readiness

The level of proficiency attained by the most effective physical and chemical regenerative processes capable of providing a habitable atmospheric environment in a spacecraft is assessed. It is shown that both the Sabatier and Bosh reactions are in a mature stage of technological readiness and can effectively reduce the carbon dioxide in a spacecraft. An electrochemical method for concentrating CO2 from an air environment offers promise to approach low levels of pCO2 control. Technological advances in the fields of solid polymer electrolytes and oxygen evolution electrocatalysts have led to a water electrolysis system that can maintain efficient performance for several years. Nitrogen supply and control of the composition of the spacecraft atmosphere is effectively provided by the circulating electrolyte technique.

Samonski, F. H., Jr.↗

NASA NTRS1981

Building with integral solar-heat storage--Starkville, Mississippi

Column supporting roof also houses rock-storage bin of solar-energy system supplying more than half building space heating load. Conventional heaters supply hot water. Since bin is deeper and narrower than normal, individual pebble size was increased to keep airflow resistance at minimum.

Source record↗

NASA NTRS1994

The embodiment design of the heat rejection system for the portable life support system

The Portable Life Support System (PLSS) provides a suitable environment for the astronaut in the Extravehicular Mobility Unit (EMU), and the heat rejection system controls the thermal conditions in the space suit. The current PLSS sublimates water to the space environment; therefore, the system loses mass. Since additional supplies of fluid must be available on the Space Shuttle, NASA desires a closed heat rejecting system. This document presents the embodiment design for a radiative plate heat rejection system without mass transfer to the space environment. This project will transform the concept variant into a design complete with material selection, dimensions of the system, layouts of the heat rejection system, suggestions for manufacturing, and financial viability.

Stuckwisch, Sue↗

NASA NTRSDate not supplied

ISRU Evaluation of Artemis Campaign Sites: Considerations and Methodology

The Artemis campaign has stated goals of ‘sustainable exploration’ [1] which includes In-Situ Resource Utilization (ISRU). The selection of the lunar polar region for Artemis was in part due to the identification of water in permanently shadowed regions (PSRs) which is of both scientific and exploration interest. The potential use of this water (as is, or as oxygen/hydrogen) for NASA and commercial applications, such as refueling vehicles, for power systems, or supplying life support consumables, is reflected in NASA’s Moon to Mars objectives (LI-7) [2]. These objectives also specify the need to locate and characterize the lunar water such that a water ‘reserve’ can be identified (AS-3). While infusion of ISRU capabilities is not planned for Artemis III, it is an opportunity to collect information to identify water reserves for later Artemis and commercial use. Selection of an Artemis III site with ISRU consideration will help advance the infusion of ISRU into later missions.

In situ resource utilization↗

NASA NTRS2010

International Space Station USOS Potable Water Dispenser On-Orbit Functionality Versus Design

The International Space Station (ISS) currently provides potable water dispensing for rehydrating crewmember food and drinking packages. There is one system located in the United States On-orbit Segment (USOS) and one system in the Russian Segment. Shuttle mission STS-126 delivered the USOS Potable Water Dispenser (PWD) to ISS on ULF2; subsequent activation occurred on November 2008. The PWD is capable of supporting an ISS crew of six, but nominally supplies only half this crew size. The PWD design provides incremental quantities of hot and ambient temperature potable water to US food and beverage packages. PWD receives iodinated water from the US Water Recovery System (WRS) Fuel Cell Water Bus, which feeds from the Water Processing Assembly (WPA). The PWD removes the biocidal iodine to make the water potable prior to dispensing. A heater assembly contained within the unit supplies up to 2.0 L of hot water (65 to 93 ?C) every 30 min. During a single meal, this quantity of water supports three to four crewmembers? food rehydration and beverages. The unit design has a functional life expectancy of 10 years, with replacement of limited life items, such as filters. To date, the PWD on-orbit performance is acceptable. Since activation of the PWD, there were several differences between on-orbit functionality and expected performance of hardware design. The comparison of on-orbit functionality to performance of hardware design is discussed for the following key areas: 1) microbial contamination, 2) no-dispense and water leakage scenarios, and 3) under-dispense scenarios.

Toon, Katherine P.↗

DOE OSTI2025

Supporting Information - How Can Crop Production Adapt to growing groundwater restrictions in the West?

Abstract This data plan outlines the structure and content of datasets generated and utilized in the research presented in the manuscript abstract. Groundwater overdraft has led to serious water supply issues in the US West. Most western states manage groundwater use through a permitting system, but California has only recently begun to restrict groundwater use statewide with the 2014 passage of groundwater restrictions which target the elimination of groundwater overdraft practices by 2042. With groundwater extraction curtailed, crop production in the US West (a $95 billion industry annually) will be affected, and appropriate response strategies will be needed to ensure minimal disruption to food production and the regional economy. In this paper, we explore the adoption of alternative adaptive responses: (a) deficit irrigation; (b) switching to less water-intensive crops; (c) changing the extent of irrigated land (including fallowing); and (d) geographically shifting crop production. Employing an integrated modeling approach, we explicitly capture the interactions and feedbacks between local hydrology, changes in crop yields, crop and land use decision-making, changes in crop prices, and regional shifts in crop production. We find that the optimal adaptive response is spatially heterogeneous and comprises a portfolio of strategies. Southwestern states and California will be the most impacted by groundwater restrictions. The optimal responses in these states are to both adopt deficit irrigation strategies and reduce a portion of their irrigated croplands, resulting in a shift in crop production to northwestern states with a larger supply of water. The datasets detailed in this repository represent the output from these integrated models, specifically designed to support the analysis and visualization presented in the manuscript and supplemental information. These datasets, used in conjunction with the scripts available at our associated GitHub repository (https://github.com/pches/Femeena_etal_How_can_crop_production_adapt), enable the reproduction of figures and facilitate a comprehensive understanding of the optimal adaptive strategies in agriculture for mitigating water stress under varying groundwater extraction scenarios, as outlined in the abstract.

DNDCe↗

DOE OSTI2025

Supporting Information - How Can Crop Production Adapt to growing groundwater restrictions in the West?

Abstract This data plan outlines the structure and content of datasets generated and utilized in the research presented in the manuscript abstract. Groundwater overdraft has led to serious water supply issues in the US West. Most western states manage groundwater use through a permitting system, but California has only recently begun to restrict groundwater use statewide with the 2014 passage of groundwater restrictions which target the elimination of groundwater overdraft practices by 2042. With groundwater extraction curtailed, crop production in the US West (a $95 billion industry annually) will be affected, and appropriate response strategies will be needed to ensure minimal disruption to food production and the regional economy. In this paper, we explore the adoption of alternative adaptive responses: (a) deficit irrigation; (b) switching to less water-intensive crops; (c) changing the extent of irrigated land (including fallowing); and (d) geographically shifting crop production. Employing an integrated modeling approach, we explicitly capture the interactions and feedbacks between local hydrology, changes in crop yields, crop and land use decision-making, changes in crop prices, and regional shifts in crop production. We find that the optimal adaptive response is spatially heterogeneous and comprises a portfolio of strategies. Southwestern states and California will be the most impacted by groundwater restrictions. The optimal responses in these states are to both adopt deficit irrigation strategies and reduce a portion of their irrigated croplands, resulting in a shift in crop production to northwestern states with a larger supply of water. The datasets detailed in this repository represent the output from these integrated models, specifically designed to support the analysis and visualization presented in the manuscript and supplemental information. These datasets, used in conjunction with the scripts available at our associated GitHub repository (https://github.com/pches/Femeena_etal_How_can_crop_production_adapt), enable the reproduction of figures and facilitate a comprehensive understanding of the optimal adaptive strategies in agriculture for mitigating water stress under varying groundwater extraction scenarios, as outlined in the abstract.

DNDCe↗

DOE OSTI2024

Impact of Geothermal District Heating System on Flexibility of Microgrid in Tuttle, Oklahoma: Preprint

Flexibility is the capability of the power grid to maintain a balance between electricity generation and variable demand. This study presents preliminary results evaluating the impact of geothermal district heating systems on the flexibility of a conceptual microgrid in Tuttle, Oklahoma. Heating demand profiles were modeled using EnergyPlus for the district that includes two schools and 250 single-family houses. Then, geothermal energy production was modeled using GEOPHIRES to estimate how much heating demand in the district can be supplied by five different geothermal system scenarios. The results indicated that geothermal energy production varied depending on the resource temperature at different depths, system configurations, and flow rates. For the grid flexibility analysis, electricity consumptions in the five geothermal systems were estimated for pump operations to circulate water from the wells to radiators, while electricity consumption by air-source heat pump in the base case was estimated to supply the same heating load. Electricity consumption in the geothermal systems was significantly lower than those in base cases. The electricity saved by the geothermal system was then incorporated into the microgrid electrical load profiles where variable renewable electricity generation is significantly high. The results visually showed that geothermal district heating system can improve grid flexibility as a baseload during the winter season. The results also highlighted potential opportunities to save energy costs that will be further analyzed in future study.

Cambium↗

DOE OSTI2025

Impact of Geothermal District Heating System on Flexibility of Microgrid in Tuttle, Oklahoma

Flexibility is the capability of the power grid to maintain a balance between electricity generation and variable demand. This study presents preliminary results evaluating the impact of geothermal district heating systems on the flexibility of microgrid in Tuttle, Oklahoma. Heating demand profiles were modeled using EnergyPlus for the district that includes two schools and 250 single-family houses. Then, geothermal energy production was modeled using GEOPHIRES to estimate how much heating demand in the district can be supplied by five different geothermal system scenarios. The results indicated that geothermal energy production varied depending on the resource temperature at different depths, system configurations, and flow rates. For the grid flexibility analysis, electricity consumptions in the five geothermal systems were estimated for pump operations to circulate water from the wells to radiators, while electricity consumption by air-source heat pump in the base case was estimated to supply the same heating load. Electricity consumption in the geothermal systems was significantly lower than those in base cases. The electricity saved by the geothermal system was then incorporated into the microgrid electrical load profiles where variable renewable electricity generation is significantly high. The results visually showed that geothermal district heating system can improve grid flexibility as a baseload during the winter season. The results also highlighted potential opportunities to save energy costs that will be further analyzed in future study.

Cambium↗

DOE OSTI2025

Supporting Information - How Can Crop Production Adapt to growing groundwater restrictions in the West?

Abstract This data plan outlines the structure and content of datasets generated and utilized in the research presented in the manuscript abstract. Groundwater overdraft has led to serious water supply issues in the US West. Most western states manage groundwater use through a permitting system, but California has only recently begun to restrict groundwater use statewide with the 2014 passage of groundwater restrictions which target the elimination of groundwater overdraft practices by 2042. With groundwater extraction curtailed, crop production in the US West (a $95 billion industry annually) will be affected, and appropriate response strategies will be needed to ensure minimal disruption to food production and the regional economy. In this paper, we explore the adoption of alternative adaptive responses: (a) deficit irrigation; (b) switching to less water-intensive crops; (c) changing the extent of irrigated land (including fallowing); and (d) geographically shifting crop production. Employing an integrated modeling approach, we explicitly capture the interactions and feedbacks between local hydrology, changes in crop yields, crop and land use decision-making, changes in crop prices, and regional shifts in crop production. We find that the optimal adaptive response is spatially heterogeneous and comprises a portfolio of strategies. Southwestern states and California will be the most impacted by groundwater restrictions. The optimal responses in these states are to both adopt deficit irrigation strategies and reduce a portion of their irrigated croplands, resulting in a shift in crop production to northwestern states with a larger supply of water. The datasets detailed in this repository represent the output from these integrated models, specifically designed to support the analysis and visualization presented in the manuscript and supplemental information. These datasets, used in conjunction with the scripts available at our associated GitHub repository (https://github.com/pches/Femeena_etal_How_can_crop_production_adapt), enable the reproduction of figures and facilitate a comprehensive understanding of the optimal adaptive strategies in agriculture for mitigating water stress under varying groundwater extraction scenarios, as outlined in the abstract.

DNDCe↗

NASA NTRS1988

Space station integrated propulsion and fluid systems study

The program study was performed in two tasks: Task 1 addressed propulsion systems and Task 2 addressed all fluid systems associated with the Space Station elements, which also included propulsion and pressurant systems. Program results indicated a substantial reduction in life cycle costs through integrating the oxygen/hydrogen propulsion system with the environmental control and life support system, and through supplying nitrogen in a cryogenic gaseous supercritical or subcritical liquid state. A water sensitivity analysis showed that increasing the food water content would substantially increase the amount of water available for propulsion use and in all cases, the implementation of the BOSCH CO2 reduction process would reduce overall life cycle costs to the station and minimize risk. An investigation of fluid systems and associated requirements revealed a delicate balance between the individual propulsion and fluid systems across work packages and a strong interdependence between all other fluid systems.

Bicknell, B.↗

DOE OSTI2024

Experimental investigation of the small-scale prototype of the dew point water recovery system

The article presents experimental investigation of the Dew Point Water Recovery (DPWR) system designed for clean water recovery using the dew point cooling phenomenon. The technology is a novel distillation process which allows for highly efficient water recovery. It is a first distillation technology which allows for water distillation through direct contact with atmospheric air. The authors designed, built, and tested an original prototype of a laboratory-scale DPWR system to verify its basic operating principles and perform performance analysis. It was shown that on average 10 × 10 −6 m 3 of clean water could be recovered from each cubic meter of the supply air with an average GOR of 1.9. Although the operation of the DPWR system requires electricity to drive fans, pumps and other associated equipment, the actual driving force of the system is thermal energy. The average thermal energy demand of the DPWR system was 370 kWh/m 3 , and more than half of this energy was based on the thermodynamic potential of the supply air. Based on experimental data, the mathematical model of the DPWR system was verified and it was found that the average relative discrepancy in predicting air temperature did not exceed 8%, and in predicting air humidity: 5%. In conclusion, the conducted experiments confirmed that the proposed DPWR system is feasible and has the potential to fill the technological gap in terms of a low-energy and easily accessible water recovery method.

42 ENGINEERING↗

NASA NTRS1977

Temperature control system for water-perfused suits

A system used to control skin temperature in human subjects wearing water-perfused garments is described. It supplies 8 l/min at 10 psi with water temperature controlled within plus or minus 0.1 C. Temperature control is facilitated by a low circulating thermal mass and a fast responding heater based on a commercially available quartz heat lamp. The system is open so that hot or cold water can be added from the building mains to produce rates of change of water temperature exceeding 5 C/min. These capabilities allow semiautomatic control of skin temperature within plus or minus 0.1 C of desired wave forms.

Brengelmann, G. L.↗

NASA NTRS2004

Summary of Resources for the International Space Station Environmental Control and Life Support System For Core Complete Modules

The Core Complete Environmental Control and Life Support (ECLS) System for the International Space Station (ISS) will consist of components and subsystems in both the United States (U.S.) and International Partner elements which together will perform the functions of Temperature and Humidity Control (THC), Atmosphere Control and Supply (ACS), Atmosphere Revitalization (AR), Water Recovery and Management (WRM), Fire Detection and Suppression (FDS), and Vacuum System (VS) for the station. Due to limited resources available on ISS, detailed attention is given to minimizing and tracking all resources associated with all systems, beginning with estimates during the hardware development phase through measured actuals when flight hardware is built and delivered. A summary of resources consumed by the addition of future U.S. ECLS system hardware to get to Core Complete is presented, including launch weight, average continuous and peak power loads, on-orbit volume and resupply logistics.

Williams, David E.↗

NASA NTRS1990

The Physical/Chemical Closed-Loop Life Support Research Project

The various elements of the Physical/Chemical Closed-Loop Life Support Research Project (P/C CLLS) are described including both those currently funded and those planned for implementation at ARC and other participating NASA field centers. The plan addresses the entire range of regenerative life support for Space Exploration Initiative mission needs, and focuses initially on achieving technology readiness for the Initial Lunar Outpost by 1995-97. Project elements include water reclamation, air revitalization, solid waste management, thermal and systems control, and systems integration. Current analysis estimates that each occupant of a space habitat will require a total of 32 kg/day of supplies to live and operate comfortably, while an ideal P/C CLLS system capable of 100 percent reclamation of air and water, but excluding recycling of solid wastes or foods, will reduce this requirement to 3.4 kg/day.

Bilardo, Vincent J., Jr.↗

DOE OSTI2021

Conducting thermal energy to the membrane/water interface for the enhanced desalination of hypersaline brines using membrane distillation

Membrane distillation (MD) is a membrane-based thermal desalination process capable of treating hypersaline brines. Standard MD systems rely on preheating the feed to drive the desalination process. However, relying on the feed to carry thermal energy is limited by a decline of the thermal driving force as the water moves across the membrane, and temperature polarization. In contrast, supplying heat directly into the feed channel, either through the membrane or other channel surfaces, has the potential of minimizing temperature polarization, increasing single-pass water recoveries, and decreasing the number of heat exchangers in the system. When solar thermal energy can be utilized, particularly if the solar heat is optimally delivered to enhance water evaporation and process performance, MD processes can potentially be improved in terms of energy efficiency, environmental sustainability, or operating costs. Here we describe an MD process using layered composite membranes that include a high-thermal-conductivity layer for supplying heat directly to the membrane-water interface and the flow channel. Here, the MD system showed stable performance with water flux up to 9 L/m 2 /hr, and salt rejection >99.9% over hours of desalinating hypersaline feed (100 g/L NaCl). In addition to bench-scale system, we developed a computational fluid dynamics model that successfully described the transport phenomena in the system.

42 ENGINEERING↗