Search NASA⌕ Search

SEARCH · Search NASA

Results for “wind loading”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

UMAINE – DEEPCWIND/OC4 SEMI FLOATING WIND TURBINE REPEAT TESTS

End of March 2013, University of Maine (UMaine) commissioned MARIN to perform repeat model tests on the 5MW DeepCwind/OC4 semi-submersible floating offshore wind turbine concept. The primary objective of these tests is to assess the influence of using MARIN’s stock wind turbine and additionally a dynamic blade pitch controller (for a selected number of tests) on previously obtained results, by repeating tests from the previous test campaign (MARIN project No. 24602) with the existing floater model. The floater consists of a 4-column semi-submersible (1 centre column and 3 outer columns) with 20 m draft and 3 catenary mooring lines, and supports a tower with a rotor and the nacelle on top. The total structure will be subjected to operational and extreme waves and wind loads, at a water depth of 200 m.

Helder, J. A.↗
DOE OSTI2019

Development of a Planar Focusing Collector for CSP

In the field of the concentrating solar power (CSP) technology, the parabolic trough is a common choice for a solar collector. Parabolic troughs are highly reflective curved mirrors that take incident sunlight and focus it onto a line-shaped receiver that runs down the center of troughs. The receivers are generally heat-absorbing pipes containing a heat transfer fluid that delivers the collected thermal energy to steam turbines or engines for generating electricity. However, parabolic troughs are constrained by wind loads and cost of materials and support structure. The goal of this project was to develop a planar focusing collector (PFC) that would serve as an alternative to the parabolic trough. An ideal PFC is ultrathin (less than a few microns) and lightweight, and could be manufactured in a manner that is scalable and low cost. Furthermore, these features would be attractive to CSP technology because of the potential to reduce cost and complexity of installation and maintenance. The work pursued in this project attempted to actualize the PFC concept by utilizing advances in the emerging area of metasurfaces, which rely on the nanopatterning of surfaces to control the amplitude and phase of light at length scales smaller than an optical wavelength. Academic pursuits of metasurface technology predominately employ electron-beam lithography (EBL) for fabrication because the technique offers highly reliable nanopatterning of surfaces with a spatial resolution of ~10 nm. However, due to the techno-economic constraints of the DOE’s SunShot program, particularly cost-effective scalability, the use of EBL was avoided in this project. Rather, fabrication approaches that lend themselves to scalable manufacturing by way of stamping or imprinting were favored. Ultimately, the tradeoffs with using such methods was the larger feature size—on the order of ~150 um critical dimension—resulting in poorer control of light compared to structures fabricated by EBL. A summary of our 2-year investigation on this topic is presented herein. We begin by presenting highlights of our 1 st -year efforts using plasmonics, i.e., metallic nanostructures, as the building block for our PFC. The limitations in this approach are subsequently summarized. We then review the strategy we employed during the final year of our project, in particular utilizing insulating or dielectric materials as the light controlling medium. We round out the report discussing the results of our findings from using this approach. The report is relatively self-contained in that and no prior knowledge of optics or nanotechnology is assumed and technical jargon is kept at a minimum.

14 SOLAR ENERGY↗
DOE OSTI2022

Providencia Island White Papers: Potential for Increasing the Physical Resilience of Distributed Energy Resources

Using technologies such as solar photovoltaics (PV) to provide power to a site during a large-scale grid outage can be an effective solution for enhancing resilience, if designed appropriately. This paper discusses storm-hardening strategies including wind-loading standards, secure racking systems, balance of electrical systems and pre-storm preparations.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

Performance of Windows in Walls With Continuous Insulation

Window openings in walls are a significant contributor to poor thermal performance because of thermal bridging through the framing members (e.g., studs, joists, plates, bracing) and because windows lack the thermal properties of insulation. Window installation guidance for walls with continuous insulation (CI) is critical for continued market growth of this energy efficiency technology. This research project offers window manufacturers a starting point and a potential path toward developing installation instructions for windows over CI. The objectives of the research include evaluating the common method for installing windows in walls with CI, as well as establishing acceptance criteria for evaluating the performance of windows installed in walls with and without CI. The research measures: 1. The performance characteristics (e.g., water management, structural integrity) of windows in walls without CI. 2. The performance of different thicknesses and types of CI used in walls. 3. The performance of different types of window assemblies (e.g., double-hung windows, mulled double-hung windows, mulled casement windows, and slider windows) installed over CI. 4. The performance of window flange types (e.g., rigid mounting and less robust flanges) installed over CI. 5. Installing windows over CI using baseline installation instructions versus window manufacturer installation instructions. The project’s sequential testing protocol consists of the following: • A water penetration resistance testing adapted from two ASTM standards: E331 (uniform static air pressure in four steps) and E547 (cyclic static air pressure) • A temperature cycling adapted from ASTM E2264 Method B (convective hot air) • A service condition wind loading test adapted from ASTM E330 • A six-month vertical displacement observation phase prior to the structural performance testing • A final water penetration resistance test after vertical displacement observation • A structural performance test adapted from ASTM E330. Key research findings include: • The criterion for passing a water penetration resistance test is that there is no water overflowing at the interior face of the studs. If there is any bubbling or slight pooling of water at the sill, then it must recede after the pressure is removed. Excessive leakage and/or water leaking to the interior face of the framing around the window constitutes a failure. • All single double-hung windows installed directly to lumber or over oriented strand board passed all test protocols. • For most wall specimens, the test results showed that the use of foam sheathing did not affect the performance of the window for water leakage. • All wall specimens underwent temperature cycling. The results indicated that temperature cycling had little to no effect on windows installed over foam sheathing. • For wall specimens that underwent six-month vertical displacement monitoring, the results showed that windows installed over foam sheathing do not sag over time. • The single-hung and double-hung windows installed using window manufacturer installation instructions passed the structural performance test, compared to failures observed in windows that were installed using generic installation instructions. The generic and manufacturer installation methods differed on the following construction details: type of fasteners, fastening patterns on the flanges, and window shimming details. • Additional testing is required to determine methods to improve structural pressure performance of slider windows. Potential solutions that would require additional testing may include fastener spacing, different types of fasteners, masonry window clips, construction adhesive, foam sealant, stronger window flange material, and/or straps.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS1973

Some extemporaneous comments on our experiences with towers for wind generators

A wind generator tower must be designed to withstand fatigue forces and gust winds loads. Optimum tower height depends on the energy cost to the customer because an increase in height results in an increase in the cost of the plant. It is suggested that costs are minimum for the shortest tower possible and that the rotor should be as large as possible.

Hutter, U.↗
NASA NTRS1976

Gust alleviation for STOL aircraft

Analytical study suggests method of improving flight performance of airplanes having relatively low wind loading and those flying at low altitudes.

Oehman, W. I.↗
NASA NTRS1975

Mount mechanisms for the Saturn 5/Apollo mobile launcher at John F. Kennedy Space Center

A support system was designed to resist hurricane wind loads at the launch pad and to allow the supported structural frame to expand and contract freely under wide ranges of temperature. This system consists of six mount mechanisms devised to meet the previously stated requirements plus a load-carrying capacity for each of 3.2-million kilograms (7-million pounds) downward and 1.6-million kilograms (3.5-million pounds) upward. A similar but lighter system of six mount mechanisms was designed for use in the sheltered environment of the vehicle assembly building. Each requirement and design result is discussed, and each mount mechanism is defined by location and type with references to visual presentations.

Balke, H. A.↗
NASA NTRS1976

Conceptual studies for new low-cost 64-m antennas

Recent software developments expedite design investigations of proposed new 64-m antenna structures. The software consists of programs to generate structure model data and a design program that chooses preferential cross sectional sizes of the structural members. Numerous new designs are summarized that can represent weight savings of from 25% to 50% with respect to the tipping weight of the existing Mars antenna. These designs provide a more favorable symmetrical support for the reflector backup and tend to provide superior surface accuracy for gravity, although not necessarily wind, loading on the antenna.

Levy, R.↗
NASA NTRS1976

Radio frequency boresight analysis of the low cost 64-meter antenna

Configurations (two) of the reflector-only assemblies, using different width backup cones, are analyzed for RF boresight direction changes and wind distortions. The wider backup cone is best for minimum weight; however, there is an optimum weight which minimizes the RF boresight errors for a wind load that produces the maximum pitching moment of both configurations.

Katow, M. S.↗
NASA NTRS1977

The sun-tracking control of solar collectors using high-performance step motors

Sun-tracking solar energy-focusing devices involving a central receiver, thermionic conversion, or a distributed solar thermal collector system are described. The Perkins solar collector uses a fixed focal point about which an 18 m-diameter parabolic dish moves on tracks. The elevation axis also moves on a circular track. A microprocessor manipulates sun sensor information and sun ephemeris data to ensure correct placement. Stepper motors are digital devices which provide direct interface with digital electronics and a wide dynamic range, and could easily be associated with the microprocessors. Design philosophy, performance criteria, wind load analysis, and control system requirements are also discussed.

Hughes, R. O.↗
NASA NTRS1980

Test and evaluation of a solar-heating system

Report documents results of evaluation tests performed on components of commerical solar heating and hot water system. Subsystems tested include flat plate solar collector, energy transport module, and control panel. Tests conducted include snow and wind loads, flame spread, and smoke classification as well as solar heating operation.

Source record↗
NASA NTRS1978

Feasibility Study of Solar Dome Encapsulation of Photovoltaic Arrays

The technical and economic advantages of using air-supported plastic enclosures to protect flat plate photovoltaic arrays are described. Conceptual designs for a fixed, latitude-tilt array and a fully tracking array were defined. Detailed wind loads and strength analyses were performed for the fixed array. Detailed thermal and power output analyses provided array performance for typical seasonal and extreme temperature conditions. Costs of each design as used in a 200 MWe central power station were defined from manufacturing and material cost estimates. The capital cost and cost of energy for the enclosed fixed-tilt array were lower than for the enclosed tracking array. The enclosed fixed-tilt array capital investment was 38% less, and the levelized bus bar energy cost was 26% less than costs for a conventional, glass-encapsulated array design. The predicted energy cost for the enclosed fixed array was 79 mills/kW-h for direct current delivered to the power conditioning units.

Source record↗
NASA NTRS1979

Test and evaluation of Fern Engineering Company, Incorporated, solar heating and hot water system

Tests, test results, examination and evaluation by Underwriters Laboratory, Inc., of a single family solar heating and hot water system consisting of collector, storage, control, transport, and data acquisition are presented. The structural characteristics of the solar flat plate collectors were evaluated according to snow and wind loads indicated in various building codes to determine their suitability for use both Michigan and Pennsylvania where prototype systems were installed. The flame spread classification of the thermal insulation is discussed and the fire tests conducted on components are described. The operation and dielectrics withstand tests of the energy transport module indicate the module is capable of rated air delivery. Tests of the control panel indicate the relay coil temperatures exceed the temperature limits allowed for the insulating materials involved.

Source record↗
NASA NTRS1978

Recent theoretical developments and experimental studies pertinent to vortex flow aerodynamics - With a view towards design

A review is presented of recent progress in a research program directed towards the development of an improved vortex-flow technology base. It is pointed out that separation induced vortex-flows from the leading and side edges play an important role in the high angle-of-attack aerodynamic characteristics of a wide range of modern aircraft. In the analysis and design of high-speed aircraft, a detailed knowledge of this type of separation is required, particularly with regard to critical wind loads and the stability and performance at various off-design conditions. A description of analytical methods is presented. The theoretical methods employed are divided into two classes which are dependent upon the underlying aerodynamic assumptions. One conical flow method is considered along with three different nonconical flow methods. Comparisons are conducted between the described methods and available aerodynamic data. Attention is also given to a vortex flow drag study and a vortex flow wing design using suction analogy.

Lamar, J. E.↗