Search NASA⌕ Search

SEARCH · Search NASA

Results for “ACRYLIC ACID”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Electrochemical characterization of aminated acrylic conducting polymer

New attempt has been made to synthesize aminated acrylic conducting polymer (AACP) using precursor of phenylvinylsulfoxide (PVS). The process was conducted via the integration of microemulsion and photopolymerization techniques. It has been utilized for covalent immobilization of amino groups by the adding of N-achryiloxisuccinimide (NAS). Thermal eliminating of benzene sulfenic acids from PVS has been done at 250 °C to form electroactive polyacetylene (PA) segment. Characterization of AACP has been conducted using fourier transform infrared (FTIR), scanning electron microscopy (SEM) and linear sweep cyclic voltammetry (CV). A range of 0.3-1.25μm particle size obtained from SEM characterization. A quasi-reversible system performed as shown in electrochemical study.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hygrothermal aging effects on polyimide and acrylate-based adhesive materials in high-performance flat-flex cable assemblies

Flat-flex assemblies are widely used across a diverse range of technologies, including consumer electronics, automotive systems, aerospace and defense applications, and medical devices, due to their compact form factor and flexibility. However, environmental stressors like temperature and humidity are known to degrade performance over time, though the main mechanisms for degradation remain unknown. Here, in this work, we examined the aging behavior of copper/polyimide/adhesive laminate systems under varying temperature and humidity conditions, focusing on material degradation and its effects on mechanical and dielectric properties. Results show that peel strength and breakdown voltage decrease with exposure time, temperature, and humidity; spectroscopic characterization revealed that the adhesive, and not the polyimide, is the weak link in the material stack-up. The adhesive, identified as a butyl acrylate-acrylonitrile (BA-AN) copolymer, exhibited age-related spectral changes that correlated with exposure severity and duration. Hydrolysis at BA ester and AN nitrile groups was identified as the primary degradation mechanism, producing amides, acids, and alcohols. We developed a mechanistic model that connects kinetic parameters for BA-AN spectral band decay to peel strength and breakdown voltage, and implicates hydrolysis at the AN moiety, not BA, in performance decrements. Modeling predictions at ambient conditions indicate faster decline in peel strength than dielectric strength at early times, followed by plateauing of both properties at longer times. These findings provide critical insights into laminate aging mechanisms and highlight the importance of addressing BA-AN degradation to improve the long-term reliability of these systems in high-humidity environments.

organic↗

Percutaneous Cyanoacrylate Glue Injection into the Renal Pseudoaneurysm to Control Intractable Hematuria After Percutaneous Nephrolithotomy

We report a case of a 43-year-old man who developed intractable hematuria after percutaneous nephrolithotomy. Angiography detected a pseudoaneurysm arising from the lower polar artery; however, embolization could not be performed because of unfavorable vascular anatomy. A percutaneous thrombin injection under ultrasound guidance initially controlled the bleeding, but hematuria subsequently recurred as a result of recanalization of the aneurysm. The case was successfully managed with ultrasound- and fluoroscopic-guided direct injection of cyanoacrylate glue into the pseudoaneurysm.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Structural analysis of polymer thin films using GISAXS in the tender X-ray region: Concept and design of GISAXS experiments using the tender X-ray energy at BL-15A2 at the Photon Factory

If small angle X-ray scattering (SAXS) utilizing the soft X-ray region is available, advanced and unique experiments, which differ from traditional SAXS methods, can be realized. For example, grazing-incidence small angle X-ray scattering (GISAXS) using hard X-ray is a powerful tool for understanding the nanostructure in both vertical and lateral directions of thin films, while GISAXS utilizing the tender X-ray region (SX-GISAXS) enables depth-resolved analysis as well as a standard GISAXS analysis in thin films. Thus, at BL-15A2 at the Photon Factory, a dedicated diffractometer for SX-GISAXS (above 2.1 keV) was constructed. This diffractometer is composed of four vacuum chambers and can be converted into the vacuum state from the sample chamber in front of the detector surface. Diffractions are clearly observed until 12th peak when measuring collagen by SAXS with an X-ray energy of 2.40 keV and a camera length of 825 mm. Additionally, we conducted the model experiment using SX-GISAXS with an X-ray energy of 2.40 keV to confirm that a poly(methyl methacrylate)-poly(n-butyl acrylate) block copolymer thin film has a microphase-separated structure in the thin film, which is composed of lamellae aligned both parallel and perpendicular to the substrate surface. Similarly, in a polystyrene-poly(methyl methacrylate) block copolymer thin film, SX-GISAXS with 3.60 keV and 5.73 keV revealed that hexagonally packed cylinders are aligned parallel to the substrate surface. The incident angle dependence of the first order peak position of the q{sub z} direction obtained from experiments at various incident X-ray energies agrees very well with the theoretical one calculated from the distorted wave Born approximation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Polymers grafted with organic phosphorous compounds for extracting uranium from solutions

Complexing or chelating agents that offer strong, selective bonding with uranium as well as a broad pH range of effectiveness, specifically including the pH range around 8.2, together with the acrylic double bonds required for radiation-induced grafting on polymers to remove uranium from a solution such as seawater. The novel adsorbing species are phosphorus-containing molecules, in particular organic phosphates, phosphonates and phosphoric acids. Organic phosphorus compounds, for example, organic phosphates, phosphonates, and phosphoric acids, are attached to polymer fibers to form fibers, fiber fabrics or membranes that are effective, or show activity, in uranium adsorption.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Multi-stimuli responsive tetra-PPO 60 -PEO 20 ethylene diamine block copolymer enables pH, temperature, and solvent regulation of Au nanoparticle composite plasmonic response

In this work a gold nanoparticle (NP) hydrogel composite prepared by multi-step cascade synthesis undergoes temperature, pH, and solvent dependent nanoscale structural transformations promoting modulation of the plasmon resonance. The composite is spontaneously prepared from a non-covalent lamellar structured lyotropic mesophase (complex fluid) composed of amphiphiles (DMPC and Triton X-100) that support the reactive constituents, a mixture of hydroxyl and acrylate end-derivatized Tetronic (Poloxamine) polymer and [AuCl4] – . The reaction sequence begins with the reduction of [AuCl4] – by the ethylene diamine linkage and PEO blocks of the Tetronic, yielding Au NPs. The redox reaction generates free radicals initiating crosslinking of the acrylate end-derivatized polymer producing a chemical hydrogel. Optical spectroscopy and electron microscopy confirm Au NP formation. ATR/FT-IR spectroscopy and thermal analysis establish acrylate crosslinking and network formation. X-ray scattering reveals the composite reversibly converts between multilamellar and bicontinuous cubic structures as temperature is increased above 35 °C for composites containing protonated ethylene diamine linkages (un-buffered water or acidic buffer). The reversible changes in nanoarchitecture red shifts and broadens the collective plasmon (from 523 nm to 575 nm) of the composite, an observation attributed to re-organization of confined NPs from 2D sheets (lamellae) to 1D columns (bicontinuous cubic channels). Composites prepared in alkaline buffer do not undergo a structural conversion with temperature, retaining a multilamellar architecture. In addition to pH and thermo-responsivity, the composite swells reversibly in polar solvents, which acts to de-aggregate and aggregate the encapsulated NPs and varies the plasmon resonance by Δ52 nm. This work reports the first combined use of a polymer to achieve both the in situ synthesis of spatially confined plasmonic NPs and their reversible stimuli-triggered re-organization mediated by interconvertible changes in scaffold nanoarchitecture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Joining Techniques for Novel Metal Polymer Hybrid Heat Exchangers

In the United States, over 50% of the unrecovered energy from industrial processes is in the form of low-grade heat (< 220°C). Materials and maintenance costs of common heat exchangers are typically too high to justify their usage. Polymers, though more affordable, are usually unsuitable for HX applications due to their low thermal conductivity (~0.2 W/mK). Here, we show that metal-polymer hybrids may be attractive from both performance and cost perspectives. The use of polymers further increases the resistance to corrosion by sulfuric and carbonic acids often present in flue gases. An ongoing work explores different configurations of layered polyimide-copper macroscale hybrids for heat exchanger applications using numerical simulations. This paper explores a manufacturing pathway for producing such layered hybrid tubes that involves directly rolling and bonding tapes made of polymer and copper foil into tubes. A critical problem in the fabrication process is the bonding of metal and polymers. We explore approaches involving adhesives (epoxy, acrylic and silicone) for metal/polymer interfaces and direct welding (ultrasonic) for metal/metal interfaces that can be integrated into the manufacturing process. We report characterizations of the thermomechanical properties of these joining processes. This work paves the way for realizing cost-effective manufacturing of heat exchangers for low grade waste heat recovery.

Kuntumalla, Gowtham↗

Milestone Report - Complete New Adsorbent Materials for Marine Testing to Demonstrate 4.5 g-U/kg Adsorbent

This report describes work on the successful completion of Milestone M2FT-14OR03100115 (8/20/2014) entitled, “Complete new adsorbent materials for marine testing to demonstrate 4.5 g-U/kg adsorbent”. This effort is part of the Seawater Uranium Recovery Program, sponsored by the U.S. Department of Energy, Office of Nuclear Energy, and involved the development of new adsorbent materials at the Oak Ridge National Laboratory (ORNL) and marine testing at the Pacific Northwest National Laboratory (PNNL). ORNL has recently developed two new families of fiber adsorbents that have demonstrated uranium adsorption capacities greater than 4.5 g-U/kg adsorbent after marine testing at PNNL. One adsorbent was synthesized by radiation-induced graft polymerization of itaconic acid and acrylonitrile onto high surface area polyethylene fibers followed by amidoximation and base conditioning. This fiber showed a capacity of 4.6 g-U/kg adsorbent in marine testing at PNNL. The second adsorbent was prepared by atom-transfer radical polymerization of t-butyl acrylate and acrylonitrile onto halide-functionalized round fibers followed by amidoximation and base hydrolysis. This fiber demonstrated uranium adsorption capacity of 5.4 g-U/kg adsorbent in marine testing at PNNL.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Fluorophilic Sigma(σ)‐Lock Self‐Healable Copolymers

Abstract Although F‐Containing molecules and macromolecules are often used in molecular biology to increase the binding with Lewis acidic groups by introducing favorable C−F dipoles, there is virtually no experimental evidence and limited understanding of the nature of these interactions, especially their role in synthetic polymeric materials. These studies elucidate the molecular origin of inter‐ and intra‐Chain interactions responsible for self‐healing of F‐Containing copolymers composed of pentafluorostyrene and n‐butyl acrylate units (p(PFS/nBA). Guided by dynamic surface oscillating force (SOF) and spectroscopic measurements supported by molecular dynamics (MD) simulations, these studies show that the reformation of σ‐σ orbitals in −C−F of PFS and CH 3 CH 2 − of nBA units enables the recovery of entropic energy via fluorophilic‐σ‐lock van der Waals forces when PFS/nBA molar ratios are ~50/50. The strength of these interactions determined experimentally for self‐healable PFS/nBA compositions is in the order ~0.3 kcal/mol which primarily comes from fluorophilic‐σ‐lock (~70 %) contributions. These interactions are significantly diminished for non‐self‐healable counterparts. Strongly polarized −C−F σ orbitals create lateral dipolar forces enhancing the affinity towards −C−H orbitals, facilitating energetically favorable interactions. Entropic recovery driven by non‐Covalent bonding offers a valuable tool in designing materials with unique functionalities, particularly self‐healable batteries and energy storage devices.

Gaikwad, Samruddhi↗

Mechanistic, Mutational, and Structural Evaluation of a Taxus Phenylalanine Aminomutase

The structure of a phenylalanine aminomutase (TcPAM) from Taxus canadensis has been determined at 2.4 {angstrom} resolution. The active site of the TcPAM contains the signature 4-methylidene-1H-imidazol-5(4H)-one prosthesis, observed in all catalysts of the class I lyase-like family. This catalyst isomerizes (S)-{alpha}-phenylalanine to the (R)-{beta}-isomer by exchange of the NH{sub 2}/H pair. The stereochemistry of the TcPAM reaction product is opposite of the (S)-{beta}-tyrosine made by the mechanistically related tyrosine aminomutase (SgTAM) from Streptomyces globisporus. Since TcPAM and SgTAM share similar tertiary- and quaternary-structures and have several highly conserved aliphatic residues positioned analogously in their active sites for substrate recognition, the divergent product stereochemistries of these catalysts likely cannot be explained by differences in active site architecture. The active site of the TcPAM structure also is in complex with (E)-cinnamate; the latter functions as both a substrate and an intermediate. To account for the distinct (3R)-{beta}-amino acid stereochemistry catalyzed by TcPAM, the cinnamate skeleton must rotate the C{sub 1}-C{sub {alpha}} and C{sub ipso}-C{sub {beta}} bonds 180{sup o} in the active site prior to exchange and rebinding of the NH{sub 2}/H pair to the cinnamate, an event that is not required for the corresponding acrylate intermediate in the SgTAM reaction. Moreover, the aromatic ring of the intermediate makes only one direct hydrophobic interaction with Leu-104. A L104A mutant of TcPAM demonstrated an 1.5-fold increase in k{sub cat} and a decrease in K{sub M} values for sterically demanding 3'-methyl-{alpha}-phenylalanine and styryl-{alpha}-alanine substrates, compared to the kinetic parameters for TcPAM. These parameters did not change significantly for the mutant with 4'-methyl-{alpha}-phenylalanine compared to those for TcPAM.

59 BASIC BIOLOGICAL SCIENCES↗

The Synthesis, Structures, and Chemical Properties of Macrocyclic Ligands Covalently Bonded into Layered Arrays

In this part of the proposal we have concentrated on the surface functionalization of α-zirconium phosphate of composition Zr(O3POH)2•H2O. It is a layered compound that can be prepared as particles as small as 30 nm to single crystals in the range of cm. This compound is an ion exchanger with a capacity of 6.64 meq per gram. It finds use as a catalyst, proton conductor, sensors, biosensors, in kidney dialysis and drug delivery. By functionalizing the surface additional uses are contemplated as will be described. The layers consist of the metal, with 4+ charge, that is positioned slightly above and below the mean layer plane and bridged by three of the four phosphate oxygens. The remaining POH groups point into the interlayer space creating double rows of POH groups but single arrays on the surface layers. The surface groups are reactive and we were able to bond silanes, isocyanates, epoxides, acrylates ` and phosphates to the surface POH groups. The layers are easily exfoliated or filled with ions by ion exchange or molecules by intercalation reactions. Highlights of our work include, in addition to direct functionalization of the surfaces, replacement of the protons on the surface with ions of different charge. This allows us to bond phosphates, biophosphates, phosphonic acids and alcohols to the surface. By variation of the ion charge of the ions that replace the surface protons, different surface structures are obtained. We have already shown that polymer fillers, catalysts and Janus particles may be prepared. The combination of surface functionalization with the ability to insert molecules and ions between the layers allow for a rich development of numerous useful other applications as well as nano-surface chemistry.

36 MATERIALS SCIENCE↗

Fluorophilic Sigma(σ)‐Lock Self‐Healable Copolymers

Although F-Containing molecules and macromolecules are often used in molecular biology to increase the binding with Lewis acidic groups by introducing favorable C−F dipoles, there is virtually no experimental evidence and limited understanding of the nature of these interactions, especially their role in synthetic polymeric materials. These studies elucidate the molecular origin of inter- and intra-Chain interactions responsible for self-healing of F-Containing copolymers composed of pentafluorostyrene and n-butyl acrylate units (p(PFS/nBA). Guided by dynamic surface oscillating force (SOF) and spectroscopic measurements supported by molecular dynamics (MD) simulations, these studies show that the reformation of σ-σ orbitals in −C−F of PFS and CH 3 CH 2 − of nBA units enables the recovery of entropic energy via fluorophilic-σ-lock van der Waals forces when PFS/nBA molar ratios are ~50/50. The strength of these interactions determined experimentally for self-healable PFS/nBA compositions is in the order ~0.3 kcal/mol which primarily comes from fluorophilic-σ-lock (~70 %) contributions. These interactions are significantly diminished for non-self-healable counterparts. Strongly polarized −C−F σ orbitals create lateral dipolar forces enhancing the affinity towards −C−H orbitals, facilitating energetically favorable interactions. Entropic recovery driven by non-Covalent bonding offers a valuable tool in designing materials with unique functionalities, particularly self-healable batteries and energy storage devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

SU-E-T-105: Development of 3D Dose Verification System for Volumetric Modulated Arc Therapy Using Improved Polyacrylamide-Based Gel Dosimeter

Purpose: The aim of this dosimetric study was to develop 3D dose verification system for volumetric modulated arc therapy (VMAT) using polyacrylamide-based gel (PAGAT) dosimeter improved the sensitivity by magnesium chloride (MgCl{sub 2}). Methods: PAGAT gel containing MgCl{sub 2} as a sensitizer was prepared in this study. Methacrylic-acid-based gel (MAGAT) was also prepared to compare the dosimetric characteristics with PAGAT gel. The cylindrical glass vials (4 cm diameter, 12 cm length) filled with each polymer gel were irradiated with 6 MV photon beam using Novalis Tx linear accelerator (Varian/BrainLAB). The irradiated polymer gel dosimeters were scanned with Signa 1.5 T MRI system (GE), and dose calibration curves were obtained using T{sub 2} relaxation rate (R{sub 2} = 1/T{sub 2}). Dose rate (100-600 MU min{sup −1}) and fractionation (1-8 fractions) were varied. In addition, a cubic acrylic phantom (10 × 10 × 10 cm{sup 3}) filled with improved PAGAT gel inserted into the IMRT phantom (IBA) was irradiated with VMAT (RapidArc). C-shape structure was used for the VMAT planning by the Varian Eclipse treatment planning system (TPS). The dose comparison of TPS and measurements with the polymer gel dosimeter was accomplished by the gamma index analysis, overlaying the dose profiles for a set of data on selected planes using in-house developed software. Results: Dose rate and fractionation dependence of improved PAGAT gel were smaller than MAGAT gel. A high similarity was found by overlaying the dose profiles measured with improved PAGAT gel dosimeter and the TPS dose, and the mean pass rate of the gamma index analysis using 3%/3 mm criteria was achieved 90% on orthogonal planes for VMAT using improved PAGAT gel dosimeter. Conclusion: In-house developed 3D dose verification system using improved polyacrylamide-based gel dosimeter had a potential as an effective tool for VMAT QA.

60 APPLIED LIFE SCIENCES↗

Bioderived Muconates by Cross-Metathesis and Their Conversion into Terephthalates

Polyethylene terephthalate that is 100 % bioderived is in great demand in the market guided by the ever-more exigent sustainability regulations with the challenge of producing renewable terephthalic acid remaining. Renewable terephthalic acid or its precursors can be obtained by Diels–Alder cycloaddition and further dehydrogenation of biomass-derived muconic acid. The cis,cis isomer of the dicarboxylic acid is typically synthesized by fermentation with genetically modified microorganisms, a process that requires complex separations to obtain a high yield of the pure product. Moreover, the cis isomer has to be transformed into the trans,trans form and has to be esterified before it is suitable for terephthalate synthesis. To overcome these challenges, we investigated the synthesis of dialkyl muconates by cross-metathesis. The Ru-catalyzed cross-coupling of sorbates with acrylates, which can be bioderived, proceeded selectively to yield diester muconates in up to 41 % yield by using very low catalyst amounts (0.5–3.0 mol %) and no solvent. In the optimized procedure, the muconate precipitated as a solid and was easily recovered from the reaction medium. Analysis by GC–MS and NMR spectroscopy showed that this method delivered exclusively the trans,trans isomer of dimethyl muconate. The Diels–Alder reaction of dimethyl muconate with ethylene was studied in various solvents to obtain 1,4-bis(carbomethoxy)cyclohexene. The cycloaddition proceeded with very high conversions (77–100 %) and yields (70–98 %) in all of the solvents investigated, and methanol and tetrahydrofuran were the best choices. Next, the aromatization of 1,4-bis(carbomethoxy)cyclohexene to dimethyl terephthalate over a Pd/C catalyst resulted in up to 70 % yield in tetrahydrofuran under an air atmosphere. Because of the high yield of the reaction of dimethyl muconate to 1,4-bis(carbomethoxy)cyclohexene, no separation step was needed before the aromatization. This is the first time that cross-metathesis is used to produce bioderived trans,trans-muconates as precursors to renewable terephthalates, important building blocks in the polymer industry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

JOINING TECHNIQUES FOR NOVEL METAL POLY MER HYBRID HEAT EXCHANGERS

In the United States, over 50% of the unrecovered e nergy from industrial processes is in the form of low- grade heat (<220°C). Materials and maintenance co sts of common heat exchangers are typically too hig h to justify their usage. Polymers, though more afford able, are usually unsuitable for HX applications due t o their low thermal conductivity (~0.2 W/mK). Here, we show that metal-polymer hybrids may be attractiv e from both performance and cost perspectives. The use of polymers further increases the resistance to c orrosion by sulfuric and carbonic acids often present in flue gases. An ongoing work explores different co nfigurations of layered polyimide-copper macroscale hybrids for heat exchanger applications using numeri cal simulations. This paper explores a manufacturing pathway for producing such layered hybrid tubes tha t involves directly rolling and bonding tapes made of polymer and copper foil into tubes. A critical problem in the fabrication process is the bonding of metal and polymers. We explore approaches involving adhesiv es (epoxy, acrylic and silicone) for metal/polymer inte rfaces and direct welding (ultrasonic) for metal/metal interfaces that can be integrated into the manufacturi ng process. We report characterizations of the therm omechanical properties of these joining processes. T his work paves the way for realizing cost-effective m anufacturing of heat exchangers for low grade waste heat recovery.

Kuntumalla, Gowtham↗

Continuous Catalytic Production of Methyl Acrylates from Unsaturated Alcohols by Gold: The Strong Effect of C=C Unsaturation on Reaction Selectivity

We demonstrate the gas-phase catalytic production of methyl acrylates by oxygen-assisted coupling of methanol with the unsaturated alcohols allyl alcohol and methylallyl alcohol over nanoporous gold (npAu) at atmospheric pressure. Analogous investigations on O-activated Au(110) exhibit the same pattern of reactivity and are used to establish that the competition between methoxy and allyloxy (or methallyloxy) reaction intermediates for adsorption sites, mediated by the reactants themselves, determines the selectivity of reaction. These results clearly show that the C=C bond substantially increases the binding efficacy of the allyloxy (or methallyloxy), thus requiring extremely high methanol mole fractions (>0.99) in order to achieve comparable surface concentrations of methoxy and produce optimum yields of either methacrylate or methyl methacrylate. Allyloxy and methallyloxy were favored by factors of ~100 and ~450, respectively, vs methoxy. These values are more than 1 order of magnitude greater than those measured for competitive binding of ethoxy and 1-butoxy vs methoxy, demonstrating the strong effect of the carbon–carbon bond unsaturation. The 4.5-fold increase due to the addition of the methyl group in methylallyl alcohol vs allyl alcohol indicates the significant effect of the additional van der Waals interactions between the methyl group and the surface. Gas-phase acidity is also shown to be a good qualitative indicator for the relative binding strength of the alkoxides. This work then provides insight into the control of reaction selectivity for coupling reactions and demonstrates the value of fundamental studies on single crystals for establishing key principles governing reaction selectivity. Notably, these oxygen-assisted coupling reactions occur without oxidation of the C=C bond.

36 MATERIALS SCIENCE↗

Recovery Act: Low Cost Integrated Substrate for OLED Lighting Development

PPG pursued the development of an integrated substrate, including the anode, external, and internal extraction layers. The objective of PPG's program was to achieve cost reductions by displacing the existing expensive borosilicate or double-side polished float glass substrates and developing alternative electrodes and scalable light extraction layer technologies through focused and short-term applied research. One of the key highlights of the project was proving the feasibility of using PPG's high transmission Solarphire® float glass as a substrate to consistently achieve organic lightemitting diode (OLED) devices with good performance and high yields. Under this program, four low-cost alternatives to the Indium Tin Oxide (ITO) anode were investigated using pilot-scale magnetron sputtered vacuum deposition (MSVD) and chemical vapor deposition (CVD) technologies. The anodes were evaluated by fabricating small and large phosphorescent organic lightemitting diode (PHOLED) devices at Universal Display Corporation (UDC). The device performance and life-times comparable to commercially available ITO anodes were demonstrated. A cost-benefit analysis was performed to down-select two anodes for further low-cost process development. Additionally, PPG developed and evaluated a number of scalable and compatible internal and external extraction layer concepts such as scattering layers on the outside of the glass substrate or between the transparent anode and the glass interface. In one external extraction layer (EEL) approach, sol-gel sprayed pyrolytic coatings were deposited using lab scale equipment by hand or automated spraying of sol-gel solutions on hot glass, followed by optimizing of scattering with minimal absorption. In another EEL approach, PPG tested large-area glass texturing by scratching a glass surface with an abrasive roller and acid etching. Efficacy enhancements of 1.27x were demonstrated using white PHOLED devices for 2.0mm substrates which are at par with the standard diffuser sheets used by OLED manufacturers. For an internal extraction layer (IEL), PPG tested two concepts combining nanoparticles either in a solgel coating inserted between the anode and OLED or anode and glass interface, or incorporated into the internal surface of the glass. Efficacy enhancements of 1.31x were demonstrated using white PHOLED devices for the IEL by itself and factors of 1.73x were attained for an IEL in combination of thick acrylic block as an EEL. Recent offline measurements indicate that, with further optimization, factors over 2.0x could be achieved through an IEL alone.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Polypeptide Grafted Hyaluronan: Synthesis and Characterization

Poly(L-leucine) grafted hyaluronan (HA-g-PLeu) has been synthesized via a Michael addition reaction between primary amine terminated poly(L-leucine) and acrylate-functionalized HA (TBAHA-acrylate). The precursor hyaluronan was first functionalized with acrylate groups by reaction with acryloyl chloride in the presence of triethylamine in N,N-dimethylformamide. 1H NMR analysis of the resulting product indicated that an increase in the concentration of acryloylchoride with respect to hydroxyl groups on HA has only a moderate effect on functionalization efficiency, f. A precise control of stoichiometry was not achieved, which could be attributed to partial solubility of intermolecular aggregates and the hygroscopic nature of HA. Michael addition at high [PLeu- NH2]/[acrylate]TBAHA ratios gave a molar grafting ratio of only 0.20 with respect to the repeat unit of HA, indicating grafting limitation due to insolubility of the grafted HA-g-PLeu. Soluble HA-g-PLeu graft copolymers were obtained for low grafting ratios (<0.039) with <8.6% by mass of PLeu and were characterized thoroughly using light scattering, 1H NMR, FT-IR, and AFM techniques. Light scattering experiments showed a strong hydrophobic interaction between PLeu chains, resulting in aggregates with segregated nongrafted HA segments. This yields local networks of aggregates, as demonstrated by atomic force microscopy. Circular dichroism spectroscopy showed a -sheet conformation for aggregates of poly(L-leucine).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗