Search NASA⌕ Search

SEARCH · Search NASA

Results for “ARTEMIS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Evaluation of Artemis I Aerodynamic Force and Moment Reconstructions and Pre-Flight Predictions for Ascent Flight

The Artemis I launch of the Space Launch System provided the first flight data for the new launch vehicle. The current paper shows comparisons of the preflight force and moment coefficient databases developed using traditional ground test and computation fluid dynamics to post-flight data reconstructions of the ascent aerodynamic force and moment coefficients. The post-flight reconstructions were developed using instrumentation on the vehicle, meteorological data, and Newton’s laws. In general, the preflight databases and post-flight reconstructed data showed similar trends throughout ascent from Mach 0.20 to Mach 3.50. Axial force coefficient showed the largest discrepancies, which is likely due to the difficulty of computing axial force from the flight data.

Space Launch System↗

Artemis I Optical Navigation System Performance

This paper summarizes the assessment of the Optical Navigation Flight Test Objective (FTO) during the flight of Artemis I. The Optical Navigation (OpNav) System was tested under a variety of range, target, and lighting conditions to evaluate the performance compared to the pre-flight predicted error models. In general, OpNav performed very well – successfully processing over a thousand images of starfields, Earth, and Moon. The performance of the algorithm when processing Moon images matched the pre-flight expected error models. The errors when processing Earth images were notably higher than the pre-flight models predicted, however this was found to be due to an over-estimation of the atmosphere bias used in the tuning of the algorithm. After the bias was re-tuned and the images reprocessed, performance significantly improved.

GNC↗

Artemis I Flight Instrumentation Data Quality Assessment and Processing

This paper is in support of the SciTech 2024 Space Launch System Aerosciences Special Sessions being organized by Brent Pomeroy and Jeremy Pinier. On November 16th, 2022, NASA launched the inaugural test flight of the Space Launch System (SLS) carrying the Orion capsule into a high orbit far beyond the Moon. The launch vehicle was instrumented with over three thousand flight instrumentation sensors, which monitored aerodynamic, acoustic, structural, and thermal environments. These data are intended to validate experimental and numerical tools used to predict the design environments which the vehicle experiences during launch and ascent. Prior to launch, tests were performed at the SLS Systems Integration Laboratory (SIL) using flight-like avionics and on the integrated flight hardware of Artemis I at the Vehicle Assembly Building (VAB). The purpose of these tests was to characterize the data acquisition units (DAUs) used to record and telemeter flight data to ground stations in order to assure that flight test objectives can be achieved and to quantify the expected quality of the flight data. In addition, pre-flight assessment and development of tools and methods used to process and disseminate flight data at the Huntsville Operations Support Center (HOSC) were conducted and adjustments made with respect to DAU time-synchronization prior to and after the flight. This paper summarizes these tests and some aspects of the post processing of data are discussed.

Developmental Flight Instrumentation↗

Artemis I Liftoff Measurements Issues and Corrections

The SLS rocket was instrumented to collect liftoff environment data during Artemis I launch. The instruments were microphones and pressure transducers. Most data were acceptable for analysis, but required corrections for port resonance, mean signal drift, data system delays, and data spikes. The data were all transmitted via telemetry and in this process some of the measurements experienced unexpectedly long gaps in the data stream. A time validated reconstruction algorithm failed when encountering the long gaps and required use of data from a simpler reconstruction process, with manually inserted data delay corrections. This paper discusses the issues and the corrections that were necessary for the launch data to determine the true physics of the acoustics occurring during launch.

environments↗

Artemis I Liftoff Measurements Issues and Corrections

The SLS rocket was instrumented to collect liftoff environment data during Artemis I launch. The instruments were microphones and pressure transducers. Most data were acceptable for analysis, but required corrections for port resonance, mean signal drift, data system delays, and data spikes. The data were all transmitted via telemetry and in this process some of the measurements experienced unexpectedly long gaps in the data stream. A time validated reconstruction algorithm failed when encountering the long gaps and required use of data from a simpler reconstruction process, with manually inserted data delay corrections. This paper discusses the issues and the corrections that were necessary for the launch data to determine the true physics of the acoustics occurring during launch.

environments↗

Evaluation of Artemis I Aerodynamic Force and Moment Reconstructions and Preflight Predictions for Ascent Flight

The Artemis I launch of the Space Launch System provided the first flight data for the new launch vehicle. The current paper shows comparisons of the preflight force and moment coefficient databases developed using traditional ground test and computation fluid dynamics to post-flight data reconstructions of the ascent aerodynamic force and moment coefficients. The post-flight reconstructions were developed using instrumentation on the vehicle, meteorological data, and Newton’s laws. In general, the preflight databases and post-flight reconstructed data showed similar trends throughout ascent from Mach 0.20 to Mach 3.50. Axial force coefficient showed the largest discrepancies, which is likely due to the difficulty of computing axial force from the flight data.

Space Launch System↗

EVA Operations for the Artemis III Science Team

The purpose of this presentation is to give the newly selected Artemis III Science Team some basic information on EVA Operations and potential interactions with the science team in both the planning and real-time phases of the mission.

EVA↗

Assessing the Relocation of Artemis Foundational Lunar Surface Concepts

The National Aeronautics and Space Administration (NASA) has defined a functionally based Moon to Mars (M2M) architecture consisting of four key human exploration segments: human lunar return (HLR), foundational exploration (FE), sustained lunar evolution (SLE), and humans to Mars (H2M). These segments are portions of the architecture which represent a stepwise increase in complexity and achievement of M2M objectives [1]. As systems are deployed during the FE segment, it may be desired or even necessary to relocate these elements on the lunar surface as the architecture transitions into the SLE segment. While some Artemis elements under development, such as rovers, are being designed for mobility during both crewed and uncrewed/dormant periods, other architectural concepts do not currently carry a mobility capability. In preparation for the Agency’s 2023 Architecture Concept Review (ACR), a team was assembled to establish a methodology for assessing the relocation feasibility of normally stationary elements. Such a capability could be applied locally or regionally, and might allow for re-purposing previously occupied terrain, expansion of exploration range, aggregation of habitation elements, or retiring systems at the end of their useful service life. The assembled NASA team investigated the relocation trade space through defining a representative concept of operations (ConOps) and assessing possible system impacts. The team focused predominately on the relocation of medium and large surface habitat architectural concepts through surface-based traverses utilizing separable mobility platforms (SMP). A representative mobility platform model was placed through simulation to analyze the possible energy requirements and dynamic illumination impacts. Preliminary assessment indicated that element relocation might be achievable, however significant system and architectural-level risks still need to be quantified. Future analysis will assist in determining what degree of element relocation provides the greatest benefit to achieving a sustained lunar presence. [1] NASA. (2022). Moon to Mars Objectives. Retrieved from: https://www.nasa.gov/sites/default/files/atoms/files/m2m-objectives-exec-summary.pdf

Artemis↗

EVA Operations for Artemis III External Teams

The purpose of this presentation is to give external Artemis III Teams (payloads, industry) some basic information on EVA Operations and hardware impacts in the design, the planning, and the real-time phases of the mission.

EVA↗

Serial Propellant Tank Pressure Behavior in Artemis I Orion-ESM Propulsion System

An oscillatory pressure behavior was observed throughout the Orion-ESM propulsion system during the Artemis I mission. This behavior was attributed to propellant oscillations within the serial line connecting the two propellant tanks for each commodity. A linearized dynamic model of the serial propellant tank system was derived to explain this behavior. The model showed excellent agreement with the flight data, with the predicted system natural frequencies matching the flight data within 1 percent.

Propellant Tank↗

Analysis of Glint During the Artemis I Mission

Glint occurs when light reflects off a specular (mirror-like) surface. In the context of spacecraft, glinted light can land in places that may cause unintended negative effects. During the Artemis I mission in November and December of 2022, the Orion vehicle was configured intentionally to cause glint to occur to study its effect on the Orion electrical power system (EPS). With the vehicle in a nose-to-sun attitude, light was reflected off the crew module’s reflective skin and onto forward-pointed solar array wings (SAWs), producing more current than would result from direct solar flux alone. Along with this flight test, glint was unexpectedly observed several other times during the mission, primarily due to light reflecting from one SAW to another. The planned glint events helped to anchor the models previously used to study this phenomenon and to understand what parameters have the most significant impact on glinted current generation. With refined models, the SAW-to-SAW glint occurrences were studied with the goal of characterizing its potential impact on vehicle operation.

Photovoltaic↗

Artemis Moon Tree Planting Ceremony

• NASA partnered with U.S. Forest Service to fly nearly 2,000 seeds of five different tree species aboard the Orion spacecraft as part of the Artemis I test flight in November 2022. • Moon trees are meant to promote STEM education and conservation. They follow the legacy of the Apollo 14 Moon trees, which flew to lunar orbit with NASA Astronaut Stuart Roosa over 50 years ago. • These flown seeds have been nurtured by the USDA into seedlings to be shared with the public to plant the next generation of "Moon Trees," which will serve as sources of inspiration.

Moon Tree↗

Implementation Plan for a NASA Integrated Lunar Science Strategy in the Artemis Era

This Implementation Plan provides a snapshot of NASA’s plans to implement the strategy recommended in OWL and to address the M2M objectives relevant to lunar science. The word “integrated” in the title refers to integrating the capabilities and new opportunities afforded by Artemis and CLPS alongside more traditional mechanisms such as The Discovery and New Frontiers Programs and various Research and Analysis (R&A) elements to achieve our lunar science objectives. It is an opportunity to present the full scope of tools currently available to NASA and how they map to high-priority lunar science that can be accomplished on and at the Moon. It is also an opportunity to build a plan for future NASA-led, lunar focused science and exploration activities that is flexible and can be adapted to a changing landscape (i.e., capability growth, priority evolution, and budgetary fluctuation).

Moon↗

A CFD Validation Study using Artemis 1 Orbital Slosh Test Data

Advancements in liquid propellant management science and technologies are key to increasing safety, decreasing cost, and increasing payload mass of NASA space missions. Liquid propellant usually comprises a large portion of the total mass of launch vehicles and spacecraft, so predicting and controlling the motion of it are important. Computational fluid dynamics (CFD) programs are critical to predicting slosh dynamics, but CFD programs require experimental validation with physically relevant test data before the results can be trusted. Low-gravity slosh test data is lacking, and most of what exists is inadequate for CFD validation. A potential slosh risk for Orion, and the lack of validated low-gravity slosh models, led to performing on-orbit slosh tests during the Artemis 1 mission to assess the impacts of slosh on the guidance, navigation, and control of Orion. This work details the validation of a coupled slosh-motion CFD model using the Orion orbital slosh test data set.

CFD↗

A CFD Validation Study Using Artemis 1 Orbital Slosh Test Data

Advancements in liquid propellant management science and technologies are key to increasing safety, decreasing cost, and increasing payload mass of NASA space missions. Liquid propellant usually comprises a large portion of the total mass of launch vehicles and spacecraft, so predicting and controlling the motion of it are important. Computational fluid dynamics (CFD) programs are critical to predicting slosh dynamics, but CFD programs require experimental validation with physically relevant test data before the results can be trusted. Low-gravity slosh test data is lacking, and most of what exists is inadequate for CFD validation. A potential slosh risk for Orion, and the lack of validated low-gravity slosh models, led to performing on-orbit slosh tests during the Artemis 1 mission to assess the impacts of slosh on the guidance, navigation, and control of Orion. This work details the validation of a coupled slosh-motion CFD model using the Orion orbital slosh test data set.

CFD↗

Artemis Suit Material Effects of Calendaring Woven Fabrics on Dust Resistance

This paper presents one element of an ongoing NASA technology-infusion effort to design, fabricate, and test a new outer shell fabric for a lunar Extravehicular Activity (EVA) space suit, a critical component of sustained lunar exploration. A primary challenge for suit textiles is preventing lunar dust, which is highly abrasive, electrostatically charged, and capable of infiltrating even tightly woven fabrics from penetrating the Environment Protection Garment (EPG) and compromising suit durability and astronaut safety. To enhance dust-blocking performance, the Artemis Suit Materials Team investigated calendaring, a continuous roll to roll mechanical finishing process in which fabric passes through heated rollers under high pressure to compress and flatten the weave, thereby reducing pore size and modifying surface texture without significantly affecting other properties. Targeted testing of calendared Teflon™ T-162 and Ortho Fabric samples provides new insight into how calendaring influences dust resistance, informing future material development and advancing EVA suit technology for long-duration lunar missions.

Dust↗

Artemis Suit Material Effects of Calendaring Woven Fabrics on Dust Resistance

This paper presents one element of an ongoing NASA technology-infusion effort to design, fabricate, and test a new outer shell fabric for a lunar Extravehicular Activity (EVA) space suit, a critical component of sustained lunar exploration. A primary challenge for suit textiles is preventing lunar dust, which is highly abrasive, electrostatically charged, and capable of infiltrating even tightly woven fabrics from penetrating the Environment Protection Garment (EPG) and compromising suit durability and astronaut safety. To enhance dust-blocking performance, the Artemis Suit Materials Team investigated calendaring, a continuous roll to roll mechanical finishing process in which fabric passes through heated rollers under high pressure to compress and flatten the weave, thereby reducing pore size and modifying surface texture without significantly affecting other properties. Targeted testing of calendared Teflon™ T-162 and Ortho Fabric samples provides new insight into how calendaring influences dust resistance, informing future material development and advancing EVA suit technology for long-duration lunar missions.

Dust↗

Two-fluid physical modeling of superconducting resonators in the ARTEMIS framework

In this work, we implement a new London equation module for superconductivity in the GPU-enabled ARTEMIS framework, and couple it to a finite-difference time-domain solver for Maxwell's equations. We apply this two-fluid approach to model a superconducting coplanar waveguide (CPW) resonator. We validate our implementation by verifying that the theoretical skin depth and reflection coefficients can be obtained for several superconductive materials, with different London penetration depths, over a range of frequencies. Our convergence studies show that the algorithm is second-order accurate in both space and time, except at superconducting interfaces where the approach is spatially first-order. In our CPW simulations, we leverage the GPU scalability of our code to compare the two-fluid model to more traditional approaches that approximate superconducting behavior and demonstrate that superconducting physics can show comparable performance to the assumption of quasi-infinite conductivity as measured by the Q-factor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗