Search NASA⌕ Search

SEARCH · Search NASA

Results for “Alternate Review”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS2024

Madidrop for Passive Silver Dosing

Madidrop is a rectangular ceramic tablet originally designed to dose a 10-20-liter volume of water with silver to act as a biocide for remote communities with unreliable water sources. Silver as a biocide is a proposed method to control bacteria on the International Space Station or future Artemis missions. This would replace iodine currently used due to issues with a dual biocide system in place between Russian and US segments and the extra cost of iodine removal required before consumption. NASA has been reviewing this Madidrop technology and its potential application with a water reclamation system on orbit to dose silver after purifying the water. While there are a couple alternative methods to dosing silver on station, this method is like the existing passive dosing method used currently to dose iodine. Tests conducted characterize the manufacturer’s original intent to leave the tablet in a tank for a specified amount of time before removing and testing alternative passive flow-through methods. Passive flow testing involved two options: keeping the tablet intact or crushing the tablet into smaller particle sizes to increase the surface area while varying particle sizes. The results of these tests revealed a large amount of silver output at first that quickly reduced to a constant lower output within a reasonable dosing concentration range. The initial high concentration peaks after a couple days of quiescence and could be useful for shocking the initial tank water contents. Madidrop used as a passive particle doser could act as a stand-in replacement for iodine in future spaceflight water reclamation systems.

Ryan Ogilvie↗
NASA NTRS1984

Ni-cd Battery Life Expectancy in Geosynchronous Orbit

The feasibility of using nickel cadmium batteries as an alternate if flight qualified NiH2 batteries are not available is explored. Battery life expectancy data being a key element of power system design, an attempt is made to review the literature, life test data and in orbit performance data to develop an up to date estimate of life expectancy for NiCd batteries in a geosynchronous orbit.

Broderick, R. J.↗
NASA NTRS1990

Infrared fiber-optic fire sensors - Concepts and designs for Space Station applications

Various design configurations used for testing IR fiber-optic (IFO) fire-sensor concepts are presented. Responsibility measurements conducted to select the best concept are reviewed. The results indicate that IFO fire-sensor systems based on distributed fiber sensors are feasible for future aerospace applications. For Space Station Freedom, these systems offer alternative fire detectors for monitoring areas within equipment or stage compartments where the ventilation may be inadequate for proper operation of smoke detectors. They also allow a large number of areas to be monitored by a single central detector unit, which reduces the associated cost and weight.

Tapphorn, Ralph M.↗
NASA NTRS1994

EEG and chaos: Description of underlying dynamics and its relation to dissociative states

The goal of this work is the identification of states especially as related to the process of error production and lapses of awareness as might be experienced during aviation. Given the need for further articulation of the characteristics of 'error prone state' or 'hazardous state of awareness,' this NASA grant focused on basic ground work for the study of the psychophysiology of these states. In specific, the purpose of this grant was to establish the necessary methodology for addressing three broad questions. The first is how the error prone state should be conceptualized, and whether it is similar to a dissociative state, a hypnotic state, or absent mindedness. Over 1200 subjects completed a variety of psychometric measures reflecting internal states and proneness to mental lapses and absent mindedness; the study suggests that there exists a consistency of patterns displayed by individuals who self-report dissociative experiences such that those individuals who score high on measures of dissociation also score high on measures of absent mindedness, errors, and absorption, but not on scales of hypnotizability. The second broad question is whether some individuals are more prone to enter these states than others. A study of 14 young adults who scored either high or low on the dissociation experiences scale performed a series of six tasks. This study suggests that high and low dissociative individuals arrive at the experiment in similar electrocortical states and perform cognitive tasks (e.g., mental math) in a similar manner; it is in the processing of internal emotional states that differences begin to emerge. The third question to be answered is whether recent research in nonlinear dynamics, i.e., chaos, offer an addition and/or alternative to traditional signal processing methods, i.e., fast Fourier transforms, and whether chaos procedures can be modified to offer additional information useful in identifying brain states. A preliminary review suggests that current nonlinear dynamical techniques such as dimensional analysis can be successfully applied to electrocortical activity. Using the data set developed in the study of the young adults, chaos analyses using the Farmer algorithm were performed; it is concluded that dimensionality measures reflect information not contained in traditional EEG Fourier analysis.

Ray, William J.↗
NASA NTRS1984

Methods for analysis of cracks in three-dimensional solids

Various analytical and numerical methods used to evaluate the stress intensity factors for cracks in three-dimensional (3-D) solids are reviewed. Classical exact solutions and many of the approximate methods used in 3-D analyses of cracks are reviewed. The exact solutions for embedded elliptic cracks in infinite solids are discussed. The approximate methods reviewed are the finite element methods, the boundary integral equation (BIE) method, the mixed methods (superposition of analytical and finite element method, stress difference method, discretization-error method, alternating method, finite element-alternating method), and the line-spring model. The finite element method with singularity elements is the most widely used method. The BIE method only needs modeling of the surfaces of the solid and so is gaining popularity. The line-spring model appears to be the quickest way to obtain good estimates of the stress intensity factors. The finite element-alternating method appears to yield the most accurate solution at the minimum cost.

Raju, I. S.↗
NASA NTRS2014

Alternative Solvents through Green Chemistry Project

Components in the aerospace industry must perform with accuracy and precision under extreme conditions, and surface contamination can be detrimental to the desired performance, especially in cases when the components come into contact with strong oxidizers such as liquid oxygen. Therefore, precision cleaning is an important part of a components preparation prior to utilization in aerospace applications. Current cleaning technologies employ a variety of cleaning agents, many of which are halogenated solvents that are either toxic or cause environmental damage. Thus, this project seeks to identify alternative precision cleaning solvents and technologies, including use of less harmful cleaning solvents, ultrasonic and megasonic agitation, low-pressure plasma cleaning techniques, and supercritical carbon dioxide extraction. Please review all data content found in the Public Data tab located at: https:techport.nasa.govview11697public

Technology Portfolio System↗
NASA NTRS1994

A Review of Evidence for High Life Coefficients on Propeller and Rotor Blades Under Static Thrust Conditions with Some New Experimental Results

Interest has increased recently in the thrust-producing capability of rotors at very high collective pitch angles. An early reference noted this behaviour in rotors and offered alternative models for section lift characteristics to explain it. The same phenomenon was coincidentally noted and used in a propeller code, resulting in very good correlation with static thrust data. The proposed paper will present experimental data demonstrating the pronounced persistence of thrust for propellers at increasing collective pitch angles. Comparisons with blade element/momentum theory will be made. These results are expected to point to the need to define (ultimately to explain) aerodynamic lift and drag behaviour in a rotating environment. Experimental measurements made by the U.S. Army Aeroflightdynamics Directorate at the Ames Research Center have shown that locally measured normal force coefficients along the span of a highly twisted rotor blade continue to increase at high values of collective pitch. In some cases these coefficients exceed expected values for the same type of airfoil tested under two dimensional conditions. To date no one to the authors' knowledge has defined the variation of C(n) with pitch for very high angles (to 45 deg) in a rotating environment and for a blade of reasonably high aspect ratio; however, total propeller thrust measurements support the idea that stalling does not occur in the same way as on a wing. This paper will present experimental data in the form of surface pressure distributions as well as flow visualization (microtufts) to explore the aerodynamic behavior of the rotating airfoil at high values of blade incidence. This paper also reviews experimental evidence and infers some high lift coefficient behavior from it. Comparisons between predicted thrust, utilizing modified airfoil characteristics and a blade element model, and measured thrust for both rotors and propellers that cover the extremes of collective pitch are shown and discussed.

Talbot, Peter D.↗
NASA NTRS1987

An assessment of clinical chemical sensing technology for potential use in space station health maintenance facility

A Health Maintenance Facility is currently under development for space station application which will provide capabilities equivalent to those found on Earth. This final report addresses the study of alternate means of diagnosis and evaluation of impaired tissue perfusion in a microgravity environment. Chemical data variables related to the dysfunction and the sensors required to measure these variables are reviewed. A technology survey outlines the ability of existing systems to meet these requirements. How the candidate sensing system was subjected to rigorous testing is explored to determine its suitability. Recommendations for follow-on activities are included that would make the commercial system more appropriate for space station applications.

Source record↗
NASA NTRS1992

Frequency multipliers for millimeter and submillimeter wavelengths

All-solid-state local oscillators in the terahertz frequency range are especially needed for space-borne radio astronomy and remote sensing of the atmosphere. Because solid-state oscillators cannot yet produce the necessary local oscillator power at submillimeter wavelengths, frequency multipliers are needed. So far, submillimeter-wave frequency multipliers are mainly based on a whisker-contacted Schottky diode as the nonlinear element. This paper discusses the multiplier theory and tools for analysis and design of millimeter- and submillimeter-wave multipliers. Experimental work is reviewed. The Schottky diode model at submillimeter frequencies, use of Schottky multiplier chains versus direct higher-order multipliers, and the effect of cooling on Schottky diode multipliers are discussed. Alternative diodes such as the high electron mobility varactor, the barrier-intrinsic n(+) diode, the barrier-n-n(+) diode, the quantum well diode, and the single barrier varactor are discussed, with attention also given to their potential as submillimeter frequency multipliers.

Raisanen, Antti V.↗
NASA NTRS1984

Aeroacoustics of turbulent shear flows

Recent analytical, numerical-simulation and experimental studies of sound generation by high-Reynolds-number turbulent shear flows are reviewed, with a focus on the application of linear rapid-distortion theory to the calculation of the unsteady flow field producing the sound. This approach is considered the most important alternative to acoustic-analogy methods. Topics surveyed include the linear theory of solid-surface interactions, the jet-noise problem, extensions to more complex turbulent flows, and supersonic flows. Graphs comparing theoretical and experimental results are shown.

Goldstein, M. E.↗
NASA NTRS1988

Diffuse cloud chemistry

The current status of models of diffuse interstellar clouds is reviewed. A detailed comparison of recent gas-phase steady-state models shows that both the physical conditions and the molecular abundances in diffuse clouds are still not fully understood. Alternative mechanisms are discussed and observational tests which may discriminate between the various models are suggested. Recent developments regarding the velocity structure of diffuse clouds are mentioned. Similarities and differences between the chemistries in diffuse clouds and those in translucent and high latitude clouds are pointed out.

Van Dishoeck, Ewine F.↗
NASA NTRS1992

Human factors with nonhumans - Factors that affect computer-task performance

There are two general strategies that may be employed for 'doing human factors research with nonhuman animals'. First, one may use the methods of traditional human factors investigations to examine the nonhuman animal-to-machine interface. Alternatively, one might use performance by nonhuman animals as a surrogate for or model of performance by a human operator. Each of these approaches is illustrated with data in the present review. Chronic ambient noise was found to have a significant but inconsequential effect on computer-task performance by rhesus monkeys (Macaca mulatta). Additional data supported the generality of findings such as these to humans, showing that rhesus monkeys are appropriate models of human psychomotor performance. It is argued that ultimately the interface between comparative psychology and technology will depend on the coordinated use of both strategies of investigation.

Washburn, David A.↗
NASA NTRS2016

Bladed Terrain on Pluto: Possible Origins and Evolutions

Pluto's Bladed Terrain (centered roughly 20 deg N, 225 deg E) covers the flanks and crests of the informally named Tartarus Dorsa with numerous roughly aligned blade-like ridges oriented approx. North-South; it may also stretch considerably farther east onto the non-close approach hemisphere but that inference is tentative. Individual ridges are typically several hundred meters high, and are spaced 5 to 10 km crest to crest, separated by V-shaped valleys. Many ridges merge at acute angles to form Y-shape junctions in plan view. The principle composition of the blades themselves we suspect is methane or a methane-rich mixture. (Methane is spectroscopically strongly observed on the optical surfaces of blades.) Nitrogen ice is very probably too soft to support their topography. Cemented mixtures of volatile and non-volatile ices may also provide a degradable but relief supporting "bedrock" for the blades, perhaps analogous to Callisto. Currently we are considering several hypotheses for the origins of the deposit from which Bladed Terrain has evolved, including aeolian disposition, atmospheric condensation, updoming and exhumation, volcanic intrusions or extrusions, crystal growth, among others. We are reviewing several processes as candidate creators or sculptors of the blades. Perhaps they are primary depositional patterns such as dunes, or differential condensation patterns (like on Callisto), or fissure extrusions. Or alternatively perhaps they are the consequence of differential erosion (such as sublimation erosion widening and deepening along cracks), variations in substrate properties, mass wasting into the subsurface, or sculpted by a combination of directional winds and solar isolation orientation. We will consider the roles of the long-term increasing solar flux and short periods of warm thick atmospheres. Hypotheses will be ordered based on observational constrains and modeling to be presented at the conference.

methane↗
NASA NTRS2016

Bladed Terrain on Pluto: Possible Origins and Evolutions

Pluto’s Bladed Terrain (centered roughly 20°N, 225°E) covers the flanks and crests of the informally named Tartarus Dorsa with numerous roughly aligned blade-like ridges oriented ~North-South; it may also stretch considerably farther east onto the non-close approach hemisphere but that inference is tentative. Individual ridges are typically several hundred meters high, and are spaced 5 to 10 km crest to crest, separated by Vshaped valleys. Many ridges merge at acute angles to form Y-shape junctions in plan view. The principle composition of the blades themselves we suspect is methane or a methane-rich mixture. (Methane is spectroscopically strongly observed on the optical surfaces of blades.) Nitrogen ice is very probably too soft to support their topography. Cemented mixtures of volatile and non-volatile ices may also provide a degradable but relief supporting “bedrock” for the blades, perhaps analogous to Callisto. Currently we are considering several hypotheses for the origins of the deposit from which Bladed Terrain has evolved, including aeolian disposition, atmospheric condensation, updoming and exhumation, volcanic intrusions or extrusions, crystal growth, among others. We are reviewing several processes as candidate creators or sculptors of the blades. Perhaps they are primary depositional patterns such as dunes, or differential condensation patterns (like on Callisto), or fissure extrusions. Or alternatively perhaps they are the consequence of differential erosion (such as sublimation erosion widening and deepening along cracks), variations in substrate properties, mass wasting into the subsurface, or sculpted by a combination of directional winds and solar isolation orientation. We will consider the roles of the long-term increasing solar flux and short periods of warm thick atmospheres. Hypotheses will be ordered based on observational constrains and modeling to be presented at the conference.

Nitrogen ice↗
NASA NTRS1978

Prospects for a civil/military transport aircraft

The similarities and disparities between commercial and military payloads, design features, missions, and transport aircraft are enumerated. Two matrices of civil/military transport aircraft designs were evaluated to determine the most cost effective payloads for a projected commercial route structure and air freight market. The probability of this market developing and the prospects for alternate route structures and freight markets are evaluated along with the possible impact on the aircraft designs. Proposals to stimulate the market and increase the viability of the common aircraft concept are reviewed and the possible impact of higher cargo demand on prospects for common civil/military freighters is postulated. The implications of planned advanced technology developments on the aircraft performance and cost are also considered.

Jobe, C. E.↗
NASA NTRS1990

Detector array evaluation and figures of merit

The commonly used methods to evaluate the performance of a two-dimensional focal-plane array using charge transfer devices are reviewed. Two figures of merit that attempt to combine quantum efficiency, read noise and dark-current generation into a single parameter are discussed. The figures of merit are suggested as possible alternatives to the D asterisk.

Dereniak, Eustace L.↗
NASA NTRS2010

Cost/Effort Drivers and Decision Analysis

Engineering trade study analyses demand consideration of performance, cost and schedule impacts across the spectrum of alternative concepts and in direct reference to product requirements. Prior to detailed design, requirements are too often ill-defined (only goals ) and prone to creep, extending well beyond the Systems Requirements Review. Though lack of engineering design and definitive requirements inhibit the ability to perform detailed cost analyses, affordability trades still comprise the foundation of these future product decisions and must evolve in concert. This presentation excerpts results of the recent NASA subsonic Engine Concept Study for an Advanced Single Aisle Transport to demonstrate an affordability evaluation of performance characteristics and the subsequent impacts on engine architecture decisions. Applying the Process Based Economic Analysis Tool (PBEAT), development cost, production cost, as well as operation and support costs were considered in a traditional weighted ranking of the following system-level figures of merit: mission fuel burn, take-off noise, NOx emissions, and cruise speed. Weighting factors were varied to ascertain the architecture ranking sensitivities to these performance figures of merit with companion cost considerations. A more detailed examination of supersonic variable cycle engine cost is also briefly presented, with observations and recommendations for further refinements.

Seidel, Jonathan↗