Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ammonium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

In Situ Synthesis of Molybdenum Carbide Nanoparticles Incorporated into Laser‐Patterned Nitrogen‐Doped Carbon for Room Temperature VOC Sensing

Abstract Carbon laser‐patterning (CLaP) is emerging as a new tool for the precise and selective synthesis of functional carbon‐based materials for on‐chip applications. The aim of this work is to demonstrate the applicability of laser‐patterned nitrogen‐doped carbon (LP‐NC) for resistive gas‐sensing applications. Films of pre‐carbonized organic nanoparticles on polyethylenetherephthalate are carbonized with a CO 2 ‐laser. Upon laser‐irradiation a compositional and morphological gradient in the films is generated with a carbon content of 92% near the top surface. The specific surface areas of the LP‐NC are increased by introducing sodium iodide (NaI) as a porogen. Electronic conductivity and surface area measurements corroborate the deeper penetration of the laser‐energy into the film in the presence of NaI. Furthermore, impregnation of LP‐NC with MoC 1− x (<10 nm) nanoparticles is achieved by addition of ammonium heptamolybdate into the precursor film. The resulting doping‐sensitive nano‐grain boundaries between p‐type carbon and metallic MoC 1− x lead to an improvement of the volatile organic compounds sensing response of Δ R / R 0 = −3.7% or −0.8% for 1250 ppm acetone or 900 ppm toluene at room temperature, respectively, which is competitive with carbon‐based sensor materials. Further advances in sensitivity and in situ functionalization are expected to make CLaP a useful method for printing selective sensor arrays.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Toward Stable Cycling of a Cost-Effective Cation-Disordered Rocksalt Cathode via Fluorination

The recently developed Li-excess cation-disordered rock salts (DRXs) exhibit an excellent chemical diversity for the development of alternative Co/Ni-free high-energy cathodes. Herein, the synthesis of a highly fluorinated DRX cathode, Li 1.2 Mn 0.6 Ti 0.2 O 1.8 F 0.2 , based on cost-effective and earth-abundant transition metals, via a solid-state reaction, is reported. The fluorinated DRX cathode using ammonium fluoride precursor exhibits more uniform particle size and delivers a specific discharge capacity of 233 mAh g -1 and specific energy of 754 Wh kg -1 , with 206 mAh g -1 retained after 200 cycles. Further, the combined synchrotron X-ray absorption spectroscopy and resonant inelastic X-ray scattering spectroscopy analysis reveals that the remarkable cycling performance is attributed to the high fluorination and thus enhanced Mn content, enabling the utilization of more Mn redox than the oxide analog. This study demonstrates a great promise to develop next-generation cost-effective DRX cathodes with enhanced capacity retention for high-energy Li-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2021

Multifunctional Conjugated Ligand Engineering for Stable and Efficient Perovskite Solar Cells

Surface passivation is an effective way to boost the efficiency and stability of perovskite solar cells (PSCs). However, a key challenge faced by most of the passivation strategies is reducing the interface charge recombination without imposing energy barriers to charge extraction. Here, a novel multifunctional semiconducting organic ammonium cationic interface modifier inserted between the light-harvesting perovskite film and the hole-transporting layer is reported. It is shown that the conjugated cations can directly extract holes from perovskite efficiently, and simultaneously reduce interface non-radiative recombination. Together with improved energy level alignment and the stabilized interface in the device, a triple-cation mixed-halide medium-bandgap PSC with an excellent power conversion efficiency of 22.06% (improved from 19.94%) and suppressed ion migration and halide phase segregation, which lead to a long-term operational stability, is demonstrated. Finally, this strategy provides a new practical method of interface engineering in PSCs toward improved efficiency and stability.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Atomically Thin, Ionic–Covalent Organic Nanosheets for Stable, High–Performance Carbon Dioxide Electroreduction

The incorporation of charged functional groups is effective to modulate the activity of molecular complexes for the CO 2 reduction reaction (CO 2 RR), yet long-term heterogeneous electrolysis is often hampered by catalyst leaching. Herein, an electrocatalyst of atomically thin, cobalt-porphyrin-based, ionic–covalent organic nanosheets (CoTAP-iCONs) is synthesized via a post-synthetic modification strategy for high-performance CO 2 -to-CO conversion. The cationic quaternary ammonium groups not only enable the formation of monolayer nanosheets due to steric hindrance and electrostatic repulsion, but also facilitate the formation of a *COOH intermediate, as suggested by theoretical calculations. Consequently, CoTAP-iCONs exhibit higher CO 2 RR activity than other cobalt-porphyrin-based structures: an 870% and 480% improvement of CO current densities compared to the monomer and neutral nanosheets, respectively. Additionally, the iCONs structure can accommodate the cationic moieties. In a flow cell, CoTAP-iCONs attain a very small onset overpotential of 40 mV and a stable total current density of 212 mA cm –2 with CO Faradaic efficiency of >95% at –0.6 V for 11 h. Further coupling the flow electrolyzer with commercial solar cells yields a solar-to-CO conversion efficiency of 13.89%. Finally, this work indicates that atom-thin, ionic nanosheets represent a promising structure for achieving both tailored activity and high stability.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Establishing Self-Dopant Design Principles from Structure–Function Relationships in Self-n-Doped Perylene Diimide Organic Semiconductors

Self-doping is a particular doping method that has been applied to a wide range of organic semiconductors. However, there is a lack of understanding regarding the relationship between dopant structure and function. A structurally diverse series of self-n-doped perylene diimides (PDIs) is investigated to study the impact of steric encumbrance, counterion selection, and dopant/PDI tether distance on functional parameters such as doping, stability, morphology, and charge-carrier mobility. The studies show that self-n-doping is best enabled by the use of sterically encumbered ammoniums with short tethers and Lewis basic counterions. Additionally, water is found to inhibit doping, which concludes that thermal degradation is merely a phenomenological feature of certain dopants, and that residual solvent evaporation is the primary driver of thermally activated doping. In situ grazing-incidence wide-angle X-ray scattering studies show that sample annealing increases the π–π stacking distance and shrinks grain boundaries for improved long-range ordering. These features are then correlated to contactless carrier-mobility measurements with time-resolved microwave conductivity before and after thermal annealing. In conclusion, the collective relationships between structural features and functionality are finally used to establish explicit self-n-dopant design principles for the future design of materials with improved functionality.

36 MATERIALS SCIENCE↗
DOE OSTI2022

High‐Performance and Stable Semi‐Transparent Perovskite Solar Cells through Composition Engineering

Abstract Semi‐transparent perovskite solar cells (ST‐PeSCs) have tremendous potential as solar windows owing to their higher efficiency and visible transmittance. However, studies toward this application are still nascent, particularly in unraveling the interplay between how the perovskite composition impacts the achievable device performance and stability. Here, the role of A‐ and X‐site modification in APbX 3 perovskites is studied to understand their influence on these factors. Through detailed experimental and simulation work, it is found that a perovskite composition consisting of cesium (Cs) and formamidinium (FA) at the A‐site delivers the best device performance over a range of band gaps, which are tuned by changes to the X‐site anion. Using this optimized perovskite composition, power conversion efficiencies of 15.5% and 4.1% are achieved for ST‐PeSCs with average visible transmittance values between 20.7% and 52.4%, respectively. Furthermore, the CsFA‐based ST‐PeSCs show excellent long‐term stability under continuous illumination and heating. The stability of the precursor solutions across each of the studied compositions has also been considered, showing dramatic differences in the structural properties of the perovskites and their device performance for all mixed A‐site compositions possessing the archetypal methyl ammonium species, while also confirming the superior stability of the CsFA precursor solutions.

14 SOLAR ENERGY↗
DOE OSTI2022

A Dual–Phase Electrolyte for High–Energy Lithium–Sulfur Batteries

Dissolution of lithium polysulfides (LiPSs) is essential for fast cathode kinetics, but detrimental for anode stability, especially under lean electrolyte conditions. Here in this work, the phase separation phenomenon between solvents with different polarities (tetramethyl sulfone [TMS] and dibutyl ether [DBE]) is utilized to enable the design of a dual-phase electrolyte. High-polarity, high-density TMS–lithium bis(trifluoromethanesulfonyl)imide–ammonium trifluoroacetate as the cathode electrolyte strongly solvates LiPSs, which propel the sulfur redox reaction. Moreover, the composite of DBE and a polymeric ion conductor serves as the anode electrolyte. The addition of DBE in the anode side effectively prevents the crossover of corrosive species (LiPSs and ammonia trifluoroacetate), enabling a significant improvement in Li-metal anode stability. The electrode-specific dual-phase electrolyte design provides electrochemical performance superior to conventional electrolytes. Without additional electrode engineering, pouch cells assemble with the dual-phase electrolyte cycle under a lean electrolyte (4 µL mg –1 ) and low-Li-excess condition (N/P = 3) for 120 cycles.

25 ENERGY STORAGE↗
DOE OSTI2020

Expanded Analogs of Three‐Dimensional Lead‐Halide Hybrid Perovskites

Abstract Replacing the Pb−X octahedral building unit of A I PbX 3 perovskites (X=halide) with a pair of edge‐sharing Pb−X octahedra affords the expanded perovskite analogs: A II Pb 2 X 6 . We report seven members of this new family of materials. In 3D hybrid perovskites, orbitals from the organic molecules do not participate in the band edges. In contrast, the more spacious inorganic sublattice of the expanded analogs accommodates larger pyrazinium‐based cations with low‐lying π* orbitals that form the conduction band, substantially decreasing the band gap of the expanded lattice. The molecular nature of the conduction band allows us to electronically dope the materials by reducing the organic molecules. By synthesizing derivatives with A II =pyridinium and ammonium, we can isolate the contributions of the pyrazinium‐based orbitals in the band gap transition of A II Pb 2 X 6 . The organic‐molecule‐based conduction band and the inorganic‐ion‐based valence band provide an unusual electronic platform with localized states for electrons and more disperse bands for holes upon optical or thermal excitation.

Umeyama, Daiki↗
DOE OSTI2021

Enhanced Reactivity of Accessible Protons in Sodalite Cages of Faujasite Zeolite

Abstract Faujasite (FAU) zeolites (with Si/Al ratio of ca. 1.7) undergo mild dealumination at moderate ion exchange conditions (0.01 to 0.6 M of NH 4 NO 3 solutions) resulting in protons circumscribed by sodalite cages becoming accessible for reaction without conspicuous changes to bulk crystallinity. The ratio of protons in sodalite cages (H SOD ) to supercages (H SUP ) can be systematically manipulated from 0 to ca. 1 by adjusting ammonium concentrations used in ion exchange. The fraction of accessible protons in the sodalite cages is assessed by virtue of infrared spectra for H‐D exchange of deuterated propane based on the band area ratio of OD 2620 /OD 2680 (OD SOD /OD SUP ). Protons in sodalite cages (H SOD ) show higher rate constants of propane dehydrogenation ( k D ) and cracking ( k C ) than protons in supercages (H SUP ) plausibly due to confinement effects being more prominent in smaller voids. Rate constants of dehydrogenation and cracking including k D / k C ratios are also augmented as the fraction of accessible protons in the sodalite cages is enhanced. These effects of accessibility and reactivity of protons in sodalite cages hitherto inconspicuous are revealed herein via methods that systematically increase accessibility of cations located in sodalite cages.

Li, Xinyu↗
DOE OSTI2023

Modular Functionalization of Metal‐Organic Frameworks for Nitrogen Recovery from Fresh Urine**

Abstract Nitrogen recovery from wastewater represents a sustainable route to recycle reactive nitrogen (Nr). It can reduce the demand of producing Nr from the energy‐extensive Haber‐Bosch process and lower the risk of causing eutrophication simultaneously. In this aspect, source‐separated fresh urine is an ideal source for nitrogen recovery given its ubiquity and high nitrogen contents. However, current techniques for nitrogen recovery from fresh urine require high energy input and are of low efficiencies because the recovery target, urea, is a challenge to separate. In this work, we developed a novel fresh urine nitrogen recovery treatment process based on modular functionalized metal–organic frameworks (MOFs). Specifically, we employed three distinct modification methods to MOF‐808 and developed robust functional materials for urea hydrolysis, ammonium adsorption, and ammonia monitoring. By integrating these functional materials into our newly developed nitrogen recovery treatment process, we achieved an average of 75 % total nitrogen reduction and 45 % nitrogen recovery with a 30‐minute treatment of synthetic fresh urine. The nitrogen recovery process developed in this work can serve as a sustainable and efficient nutrient management that is suitable for decentralized wastewater treatment. This work also provides a new perspective of implementing versatile advanced materials for water and wastewater treatment.

Guo, Lei↗
DOE OSTI2025

Aqueous Zr/Hf IV ‐Oxo Cluster Speciation and Separation

Abstract Many industrial separations of chemically‐similar elements are achieved by solvent extraction, exploiting differences in speciation and solubility across aqueous‐organic interfaces. We recently identified [OM 4 (OH) 6 (SCN) 12 ] 4− (OM 4 , M=Zr/Hf IV ) tetrahedral oxoclusters as the main species in industrial processes that produce nuclear‐grade Zr and Hf from crude ore. However, isostructural/isoelectronic OM 4 ‐oxoclusters do not explain selective extraction of Hf into the organic phase. Here we have characterized heterometal Hf−Zr clusters in solution and the solid‐state yielding key information about their fundamentally different chemistry that engenders separation. Clusters prepared with both ammonium (industrial process) and tetramethylammonium counter cations revealed that 1) heterometal clusters (instead of a mixture of homometal clusters) assemble, and 2) Hf‐rich OM 4 selectively precipitates over Zr‐rich OM 4 , providing a separation process that does not require an organic extractant. Mass spectrometry, small‐angle X‐ray scattering, solution‐state 1 H nuclear magnetic resonance (NMR) spectroscopy, and solid‐state 17 O NMR evidence both mixed‐metal speciation and selective Hf‐precipitation. Raman spectroscopy suggests greater Zr‐ligand lability than Hf‐ligand lability, consistent with higher aqueous solubility of Zr‐rich clusters, enabling both extraction and precipitation‐based separation. Fundamentally, we also identify a key difference between these chemically similar elements that has enabled diversification of Zr‐polyoxocation chemistry over the last decade, while Hf‐polyoxocation chemistry lags.

Roseborough, Alexander [Department of Chemistry Or↗
DOE OSTI2020

Expanded Analogs of Three-Dimensional Lead-Halide Hybrid Perovskites

Replacing the Pb-X octahedral building unit of A I PbX 3 perovskites (X=halide) with a pair of edge-sharing Pb-X octahedra affords the expanded perovskite analogs: A II Pb 2 X 6 . We report seven members of this new family of materials. In 3D hybrid perovskites, orbitals from the organic molecules do not participate in the band edges. In contrast, the more spacious inorganic sublattice of the expanded analogs accommodates larger pyrazinium-based cations with low-lying π* orbitals that form the conduction band, substantially decreasing the band gap of the expanded lattice. The molecular nature of the conduction band allows us to electronically dope the materials by reducing the organic molecules. By synthesizing derivatives with AII=pyridinium and ammonium, we can isolate the contributions of the pyrazinium-based orbitals in the band gap transition of A II Pb 2 X 6 . The organic-molecule-based conduction band and the inorganic-ion-based valence band provide an unusual electronic platform with localized states for electrons and more disperse bands for holes upon optical or thermal excitation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Enhanced Reactivity of Accessible Protons in Sodalite Cages of Faujasite Zeolite

We report Faujasite (FAU) zeolites (with Si/Al ratio of ca. 1.7) undergo mild dealumination at moderate ion exchange conditions (0.01 to 0.6 M of NH 4 NO 3 solutions) resulting in protons circumscribed by sodalite cages becoming accessible for reaction without conspicuous changes to bulk crystallinity. The ratio of protons in sodalite cages (H SOD ) to supercages (H SUP ) can be systematically manipulated from 0 to ca. 1 by adjusting ammonium concentrations used in ion exchange. The fraction of accessible protons in the sodalite cages is assessed by virtue of infrared spectra for H-D exchange of deuterated propane based on the band area ratio of OD 2620 /OD 2680 (OD SOD /OD SUP ). Protons in sodalite cages (H- SOD ) show higher rate constants of propane dehydrogenation (k D ) and cracking (k C ) than protons in supercages (H SUP ) plausibly due to confinement effects being more prominent in smaller voids. Rate constants of dehydrogenation and cracking including k D /k C ratios are also augmented as the fraction of accessible protons in the sodalite cages is enhanced. These effects of accessibility and reactivity of protons in sodalite cages hitherto inconspicuous are revealed herein via methods that systematically increase accessibility of cations located in sodalite cages.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Modular Functionalization of Metal‐Organic Frameworks for Nitrogen Recovery from Fresh Urine

Nitrogen recovery from wastewater represents a sustainable route to recycle reactive nitrogen (Nr). It can reduce the demand of producing Nr from the energy-extensive Haber-Bosch process and lower the risk of causing eutrophication simultaneously. In this aspect, source-separated fresh urine is an ideal source for nitrogen recovery given its ubiquity and high nitrogen contents. However, current techniques for nitrogen recovery from fresh urine require high energy input and are of low efficiencies because the recovery target, urea, is a challenge to separate. In this work, we developed a novel fresh urine nitrogen recovery treatment process based on modular functionalized metal–organic frameworks (MOFs). Specifically, we employed three distinct modification methods to MOF-808 and developed robust functional materials for urea hydrolysis, ammonium adsorption, and ammonia monitoring. By integrating these functional materials into our newly developed nitrogen recovery treatment process, we achieved an average of 75 % total nitrogen reduction and 45 % nitrogen recovery with a 30-minute treatment of synthetic fresh urine. The nitrogen recovery process developed in this work can serve as a sustainable and efficient nutrient management that is suitable for decentralized wastewater treatment. This work also provides a new perspective of implementing versatile advanced materials for water and wastewater treatment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Cellular Phosphate Sensing and Anion Binding by an Azacrown‐Calixpyrrole Hybrid

A hybrid receptor-sensor for anions originating from the merging of positively charged ammonium moieties for electrostatic attraction/stronger binding of azacrowns with directionality of calixpyrrole hydrogen bond donors for selectivity is investigated. As demonstrated this hybrid receptor-sensor shows a remarkable selectivity for orthophosphate even in the presence of other phosphates and anions found in cellular materials (K assoc H 2 PO 4 − >H 2 P 2 O 7 2− >AMP − ≫ADP 2− or ATP 3− over halides, nitrate, or hydrogen sulfate; all Na + salts in water) but also cellular polyphosphate or phospholipids. This selectivity is harnessed in a real-time monitoring of cell lysis by lysozyme, which releases orthophosphate and other phosphates and anions from the cells. This sensitive (LOD 0.4 μM) fluorescence-based microscale method compares favorably with the state-of-the-art techniques but can easily be practiced in a high-throughput screening (HTS) manner. The anion binding and selectivity in aqueous solutions were investigated by NMR and put in context with phosphate binding of the parent calix[4]pyrrole. The microscopic understanding of anion binding by the hybrid receptor was then obtained from a combination of density functional theory (DFT), classical molecular dynamics (MD) with explicit water solvation, and ab initio MD (AIMD) simulations. Correlating the NMR and fluorescence binding data with studies of solvation of the receptor, phosphate anion, and the resulting complex confirms the binding is largely driven by entropic component (TΔS) associated with receptor and anion desolvation.

Anions↗
DOE OSTI2025

Thorium Bis‐Salophen Trimers as Anion Detectors and Binding Agents

Bis‐salophen ligands are the condensation product of a tetramine and a salicylaldehyde derivative. They feature two binding sites, both of which are tetradentate with mixed O/N donor atoms. Reaction with the ligand precursor and thorium nitrate tetrahydrate forms a 3:3 metal‐to‐ligand trimer with a ΔΔΔ‐chirality confirmed by X‐ray crystallography of a racemic single crystal. The structure has a pore in the center of the triangular structure measuring 6.22 Å at its narrowest point. This compound is air‐ and water‐stable as well as soluble in organic solvents. Here, this compound was screened with a series of tetrabutyl ammonium halide salts, and tetrabutylammonium (TBA) chloride showed the strongest binding to the complex. After the addition of 2 equivalents of TBACl, the complex and salt precipitate out of solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Photocatalytic Activity and Stability of Carbon Nitride‐Pyrite Composites

Abstract In photocatalysis, the photoabsorber plays a crucial role in the reaction. The most important parameters are stability, cost and optical band gap. In this work, a prominent class of absorbers, namely carbon nitrides (CN), has been investigated. In the literature, CN is most often described as stable, although photodegradation has been observed. In order to retain the beneficial properties of CN while improving stability, a crystalline phase poly(triazine imide) (PTI) of carbon nitride was investigated and compared to polymeric CN in photocatalytic hydrogen generation experiments. In order to improve the charge separation for the photoinduced hydrogen evolution reaction, pyrite (FeS 2 ) was used as a surface co‐catalyst with a loading of 1, 5 and 10 wt %. At the same time, any photodegradation products in solution were investigated by ion chromatography. Interestingly, PTI shows hardly any photocorrosion compared to defective carbon nitride, indicating its higher photostability in hydrogen evolution experiments. However, FeS 2 produces ammonium as a degradation product when synthesised from nitrogen‐containing precursors. When made from nitrogen‐free precursors, FeS 2 together with photostable PTI releases little ammonia, making it a photostable, earth‐abundant composite for photocatalytic hydrogen generation.

Kaulbersch, Julian [University of Bayreuth 95440 B↗
DOE OSTI2021

Rhizosphere bacteria containing ACC deaminase decrease root ethylene emission and improve maize root growth with localized nutrient supply

Abstract Localized nutrient supply can enhance maize root proliferation, but also increase root ethylene production. Whether engineering ethylene signalling in the rhizosphere can further enhance root growth and nutrient uptake remains unknown. Here, field and column experiments for maize ( Zea mays . L) were designed as different nutrient treatments (broadcast or localized nutrient supply containing ammonium and phosphorus) with or without inoculation with rhizobacterium Variovorax paradoxus 5C‐2 containing the 1‐aminocyclopropane‐1‐carboxylate (ACC) deaminase. Rhizobacterial inoculation increased shoot biomass by 12% and root length density by 50% with localized nutrient supply. Meanwhile, localized nutrient supply increased root ethylene production by 54% compared with broadcast, and rhizobacterial inoculation prevented the increase in root ethylene. Reduced root ethylene production following V. paradoxus 5C‐2 inoculation was highly associated with a greater proportion of fine root proliferation under localized nutrient supply, which may account for the increased nitrogen and phosphorus uptake. Our work sheds light on the understanding of the interactions between root and microbe through taking hormone into consideration to dissect the relationship between below ground and above ground. It is useful to explore the strategy of soil–crop management by introducing rhizosphere microorganisms to regulate plant ethylene signal and then benefit sustainable agriculture.

Jin, Kemo↗