Search NASA⌕ Search

SEARCH · Search NASA

Results for “BOUNDARY LAYER - AIRFOILS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

The relaxation of a turbulent boundary layer in an adverse pressure gradient

Reattached turbulent boundary layer relaxation downstream of a wall fence is investigated. An adverse pressure gradient is imposed upon it which is adjusted to bring the boundary layer into equilibrium. The pressure gradient is adjusted so as to bring the Clauser parameter G down to a value of about 11.4 and then maintain it constant. In the region from the reattachment point to 2 or 3 reattachment lengths downstream, the boundary layer recovers from the initial major effects of reattachment. Farther downstream, where G is constant, the pressure-gradient parameter changes very slowly and profiles of non-dimensionalized eddy viscosity appear self-similar. However, pressure gradient and eddy viscosity are both roughly twice as large as expected on the basis of previous equilibrium turbulent boundary layer studies.

Cutler, Andrew D.↗
NASA NTRS1989

Diverging boundary layers with zero streamwise pressure gradient

The effects of spanwise divergence on the boundary layer forming between a pair of embedded streamwise vortices with the common flow between them directed toward the wall was studied. Measurements indicate that divergence controls the rate of development of the boundary layer and that large divergence significantly retards boundary layer growth and enhances skin friction. For strongly diverging boundary layers, divergence accounts for nearly all of the local skin friction. Even with divergence, however, the local similarity relationships for two-dimensional boundary layers are satisfactory. Although divergence modifies the mean development of the boundary layer, it does not significantly modify the turbulence structure. In the present experiments with a zero streamwise pressure gradient, it was found that spanwise divergence dit not significantly affect the Reynolds stress and the turbulent triple product distributions.

Pauley, Wayne R.↗
NASA NTRS1987

Boundary layer simulation improvement

The current Boundary Layer Integral Matrix Procedure - Version J (BLIMPJ) is advanced with regard to the previously modeled calculation methods accounting for surface roughness, relaminarization, condensed phase, and thick boundary layer effects. Current analytical limitations will be relaxed to permit more realistic wall and flow conditions and to use appropriate turbulence models with specific emphasis for the projected Orbit Transfer Vehicle (OTV) engine application. The updates will be incorporated into the BLIMPJ computer program, and the modified program will be made operational on the MSFC CRAY computer system. Experimental feasibility studies were conducted to find out how to obtain quality test data with advanced instrumentation for concept verification purposes.

Praharaj, Sarat C.↗
NASA NTRS1956

Boundary Layer

The fundamental, practically the most important branch of the modern mechanics of a viscous fluid or a gas, is that branch which concerns itself with the study of the boundary layer. The presence of a boundary layer accounts for the origin of the resistance and lift force, the breakdown of the smooth flow about bodies, and other phenomena that are associated with the motion of a body in a real fluid. The concept of boundary layer was clearly formulated by the founder of aerodynamics, N. E. Joukowsky, in his well-known work "On the Form of Ships" published as early as 1890. In his book "Theoretical Foundations of Air Navigation," Joukowsky gave an account of the most important properties of the boundary layer and pointed out the part played by it in the production of the resistance of bodies to motion. The fundamental differential equations of the motion of a fluid in a laminar boundary layer were given by Prandtl in 1904; the first solutions of these equations date from 1907 to 1910. As regards the turbulent boundary layer, there does not exist even to this day any rigorous formulation of this problem because there is no closed system of equations for the turbulent motion of a fluid. Soviet scientists have done much toward developing a general theory of the boundary layer, and in that branch of the theory which is of greatest practical importance at the present time, namely the study of the boundary layer at large velocities of the body in a compressed gas, the efforts of the scientists of our country have borne fruit in the creation of a new theory which leaves far behind all that has been done previously in this direction. We shall herein enumerate the most important results by Soviet scientists in the development of the theory of the boundary layer.

Loitsianskii. L. G.↗
NASA NTRS1982

Computation of incompressible, three-dimensional turbulent boundary layers and comparison with experiment

Incompressible three dimensional, turbulent boundary layer (3DTBL) experiments were simulated numerically by integrating the boundary layer equations together with an algebraic eddy viscosity turbulence model. For the flow treated, the downstream portion, where the crossflow was large, was not predicted with the present computational method; the flow was significantly influenced by elliptic flow field effects. Departures from the boundary layer concept are indicated. Calculations agreed reasonably well with the mean flow development up to separation. In one experiment the normal pressure gradients were found to be neligible in regions with large skewing and allowed testing turbulence models using the boundary layer equations. The simulation of this flow compared favorably with the experimental data throughout the flow field and suggested the applicability of algebraic eddy viscosity models for 3DTBLs.

Mueller, U. R.↗
NASA NTRS1976

An experimental investigation of a two and a three-dimensional low speed turbulent boundary layer

Experimental studies of a two and a three-dimensional low speed turbulent boundary layer were conducted on the side wall of a boundary layer wind tunnel. The 20 ft. long test section, with a rectangular cross section measuring 17.5 in. x 46 in., produced a 3.5 in. thick turbulent boundary layer at a free stream Reynolds number. The three-dimensional turbulent boundary layer was produced by a 30 deg swept wing-like model faired into the side wall of the test section. Preliminary studies in the two-dimensional boundary layer indicated that the flow was nonuniform on the 46 in. wide test wall. The nonuniform boundary layer is characterized by transverse variations in the wall shear stress and is primarily caused by nonuniformities in the inlet damping screens.

Winkelmann, A. E.↗
NASA NTRS1983

Analogies between transitional and turbulent boundary layers

One of the interesting aspects of transitional and turbulent boundary layers is the development of counter-rotating streamwise vortices near the wall. The most regular pattern is found in a boundary layer on a concave wall where the generation mechanism is known to be the Goertler instability. The origin of these vortices in other translational and turbulent boundary layers is presently unknown. Since the counter-rotating vortices are located in a region of strong shear, low-speed fluid is pumped away from the wall which coalesces into regions of low momentum lying between the vortices. As this pumping action continues, localized inflectional velocity profiles become apparent in the transitional and turbulent boundary layers. The oscillations which develop upon these profiles scale with the local thickness and velocity difference in the same manner as the two-dimensional steady free shear layer stability problems. The oscillations grow to large amplitude and break down into new turbulence in both the transitional and turbulent boundary layers.

Blackwelder, R. F.↗
NASA NTRS1977

Remote sensing of the boundary layer

Limited information about the boundary layer stratification is obtained from remote infrared spectral measurements in the water vapor window region. A global map of the average strength of the water vapor spectral lines in the 9 micron window region derived from Nimbus 4 IRIS data is presented to indicate this boundary layer information. Presence of deep convective layer in the intertropical convergence zone and trade wind inversion over the subtropical oceanic high pressure systems are appropriately revealed in this map.

Prabhakara, C.↗
NASA NTRS1988

Sidewall boundary-layer measurements with upstream suction in the Langley 0.3-meter transonic cryogenic tunnel

The Langley 0.3 Meter Transonic Cryogenic Tunnel has provision for boundary removal from the sidewalls to reduce sidewall interference effects on the test data. The tests carried out to determine the change in the empty test section sidewall boundary layer thickness at the model station with upstream boundary layer mass removal are described. The boundary layer measurements showed that the upstream removal region is effective in reducing the boundary layer thickness at the model station. The boundary layer displacement thickness reduced from about 1.2 percent to about .4 percent of the test section width. The boundary layer velocity profiles followed a power law variation in the outer region and showed good correlation when plotted in terms of boundary layer momentum thickness.

Murthy, A. V.↗
NASA NTRS1951

On motion of fluid in boundary layer near line of intersection of two planes

In the paper "The Mutual Interference of Boundary Layers," the authors investigated the problem of the interference of two planes intersecting at right angles on the boundary layers formed by the motion of fluid along the line of intersection of these planes. In the present paper, the results of the preceding one are generalized to the case of planes intersecting at any angle. The motion of a fluid in an angle less than 180 degrees is discussed and the enlargement of the boundary layers near the line of intersection of the planes, the limits of the interference effects of the boundary layers, and the corrections on the drag are determined. All computations are conducted by the Karman-Pohlhausen method for laminar and turbulent boundary layers. The results are reduced to tabulated form.

BOUNDARY LAYER - PLATES↗
NASA NTRS1978

Effect of the properties of a porous coating on boundary layer stability

Drawing off gas from the boundary layer is a well-known method for increasing the stability of boundary layers. The increase in stability is primarily connected with a change in the velocity profile form in the case of suction. On the basis of the assumption that the velocity perturbations on a porous slate do not equal zero, the influence of the properties of a permeable surface upon the boundary layer stability were studied.

Gaponov, S. A.↗
NASA NTRS1992

Interface of an uncoupled boundary layer algorithm with an inviscid core flow algorithm for unsteady supersonic engine inlets

An uncoupled boundary layer algorithm was combined with an inviscid core flow algorithm to model flows within supersonic engine inlets. The inviscid flow algorithm that was used was the LArge Perturbation INlet Code (LAPIN). The boundary layer and inviscid core flow algorithms were formulated in different manners. The boundary layer algorithm was two dimensional and solved in nonconservation form, while the core flow algorithm was one dimensional and solved in conservation form. In order to interface the two codes, the following modifications were important. The coordinate system was set up to maintain the parabolic nature of the boundary layer algorithm while approaching the one dimensional core flow solution far from a wall. The pressure gradient used in the boundary layer equation was calculated using the core flow values and the boundary layer equations, so the boundary layer solution smoothly approached the core flow values far from the wall. Flaring was used for the advection terms perpendicular to the core flow to maintain the stability of the algorithm. With these modifications, the combined viscous/inviscid algorithm matched well with experimental observations of pressure distributions with a supersonic inlet.

Darling, Douglas↗
NASA NTRS1992

Interface of an uncoupled boundary layer algorithm with an inviscid core flow algorithm for unsteady supersonic engine inlets

An uncoupled boundary layer algorithm was combined with an inviscid core flow algorithm to model flows within supersonic engine inlets. The inviscid flow algorithm that was used was the LArge Perturbation INlet Code (LAPIN). The boundary layer and inviscid core flow algorithms were formulated in different manners. The boundary layer algorithm was two dimensional and solved in nonconservation form, while the core flow algorithm was one dimensional and solved in conservation form. In order to interface the two codes, the following modifications were important. The coordinate system was set up to maintain the parabolic nature of the boundary layer algorithm while approaching the one dimensional core flow solution far from a wall. The pressure gradient used in the boundary layer equation was calculated using the core flow values and the boundary layer equations, so the boundary layer solution smoothly approached the core flow values far from the wall. Flaring was used for the advection terms perpendicular to the core flow to maintain the stability of the algorithm. With these modifications, the combined viscous/inviscid algorithm matched well experimental observations of pressure distributions with a supersonic inlet.

Darling, Douglas↗
NASA NTRS1979

Finite-element numerical modeling of atmospheric turbulent boundary layer

A dynamic turbulent boundary-layer model in the neutral atmosphere is constructed, using a dynamic turbulent equation of the eddy viscosity coefficient for momentum derived from the relationship among the turbulent dissipation rate, the turbulent kinetic energy and the eddy viscosity coefficient, with aid of the turbulent second-order closure scheme. A finite-element technique was used for the numerical integration. In preliminary results, the behavior of the neutral planetary boundary layer agrees well with the available data and with the existing elaborate turbulent models, using a finite-difference scheme. The proposed dynamic formulation of the eddy viscosity coefficient for momentum is particularly attractive and can provide a viable alternative approach to study atmospheric turbulence, diffusion and air pollution.

Lee, H. N.↗
NASA NTRS1949

An Approximate Method for Calculation of the Laminar Boundary Layer with Suction for Bodies of Arbitrary Shape

Various ways were tried recently to decrease the friction drag of a body in a flow; they all employ influencing the boundary layer. One of them consists in keeping the boundary layer Laminar by suction; promising tests have been carried out. Since for large Reynolds numbers the friction drag of the laminar boundary layer is much lower than that of the turbulent boundary layer, a considerable saving in drag results from keeping the boundary layer laminar, even with the blower power required for suction taken into account. The boundary layer is kept laminar by suction in two ways: first, by reduction of the thickness of the boundary layer and second, by the fact that the suction changes the form of the velocity distribution so that it becomes more stable, in a manner similar to the change by a pressure drop. There by the critical Reynolds number of the boundary layer (USigma*/V) (sub crit) becomes considerably higher than for the case without suction. This latter circumstance takes full effect only if continuous suction is applied which one might visualize realized through a porous wall. Thus the suction quantities required for keeping the boundary layer laminar become so small that the suction must be regarded as a very promising auxiliary means for drag reduction.

Schlichting, H.↗
NASA NTRS1985

The Goertler vortex instability mechanism in three-dimensional boundary layers

The two-dimensional boundary layer on a concave wall is centrifugally unstable with respect to vortices aligned with the basic flow for sufficiently high values of the Goertler number. However, in most situations of practical interest the basic flow is three-dimensional and previous theoretical investigations do not apply. The linear stability of the flow over an infinitely long swept wall of variable curvature is considered. If there is no pressure gradient in the boundary layer the instability problem can always be related to an equivalent two-dimensional calculation. However, in general, this is not the case and even for small values of the crossflow velocity field dramatic differences between the two and three-dimensional problems emerge. When the size of the crossflow is further increased, the vortices in the neutral location have their axes locally perpendicular to the vortex lines of the basic flow.

Hall, P.↗
NASA NTRS2019

A New Method to Retrieve the Diurnal Variability of Planetary Boundary Layer Height from Lidar Under Different Thermodynamic Stability Conditions

The planetary boundary layer height (PBLH) is an important parameter for understanding the accumulation of pollutants and the dynamics of the lower atmosphere. Lidar has been used for tracking the evolution of PBLH by using aerosol backscatter as a tracer, assuming aerosol is generally well-mixed in the PBL; however, the validity of this assumption actually varies with atmospheric stability. This is demonstrated here for stable boundary layers (SBL), neutral boundary layers (NBL), and convective boundary layers (CBL) using an 8-year dataset of micropulse lidar (MPL) and radiosonde (RS) measurements at the ARM Southern Great Plains, and MPL at the GSFC site. Due to weak thermal convection and complex aerosol stratification, traditional gradient and wavelet methods can have difficulty capturing the diurnal PBLH variations in the morning and forenoon, as well as under stable conditions generally. A new method is developed that combines lidar-measured aerosol backscatter with a stability dependent model of PBLH temporal variation (DTDS). The latter helps “recalibrate” the PBLH in the presence of a residual aerosol layer that does not change in harmony with PBL diurnal variation. The hybrid method offers significantly improved PBLH detection, with better correlation and smaller biases, under most thermodynamic conditions, especially for SBL and CBL. Relying on the physical process of PBL diurnal development, different schemes are developed for growing, maintenance, and decaying periods. Comprehensive evaluation of this new method shows much better tracking of diurnal PBLH variation and significantly smaller biases under various pollution levels.

Tianning Su↗
DOE OSTI2025

Identifying synoptic controls on boundary layer thermodynamic and cloud properties in a regional forecast model

Although most of our understanding of boundary layer cloudiness is based on idealized, subtropical, barotropic marine environments, boundary layer clouds exist across a range of conditions. In this study, we use the Naval Research Laboratory's Coupled Ocean/Atmosphere Mesoscale Prediction System (COAMPS) and an automated cold-front-relative analysis framework to explore the boundary layer structure associated with low clouds across a transect through the cold front of a midlatitude synoptic cyclone. The model credibly captures boundary layer structure in line with conceptual models of midlatitude cyclones and ground-based observations at Graciosa Island in the Azores. The warm sector is conditionally unstable, with clouds that are too shallow and with too little liquid water, compared to cloud property retrievals from satellite and surface-based instruments. The cold-frontal region exhibits convection associated with weak stability and ascent. Northwest of the cold front, the boundary layer is well mixed, deeper, and capped by a strong inversion maintained by large-scale subsidence. Simulated clouds in frontal and post-frontal regions are mostly too thick, with too much liquid water and too little cloud base drizzle. The post-frontal clouds are associated with grid-scale updrafts, which appear to be the model's attempt to represent mesoscale organization of cellular convection typically observed in the cold sector of midlatitude cyclones. The deep, well-mixed post-frontal boundary layers and cloudiness are maintained by strong surface fluxes, as in cold air outbreaks. Our analysis framework serves as a unique approach to model verification, and our results offer insights into differences in boundary layer cloud behavior between subtropical and synoptic cold-sector regimes.

Eissner, Jordan M. [Univ. of Kansas, Lawrence, KS ↗