SEARCH · Search NASA

Results for “Biomass fractionation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

All sources NASA NTRS DOE OSTI

DOE OSTI2026

Calculation of monomer yields, verification of PG concentration approximation, catalyst comparison for neat aromatic RCF, SEM micrographs for postreaction pulps, yields of aqueous-phase sugar derivatives after PG-H2O RCF, reactor pressure transients, GPC comparing pre- and postreaction organic solvent composition, PG-H2O miscibility testing, GPC probing dimer/oligomer fractionation in PG-H2O mixtures for

Reductive catalytic fractionation (RCF) is an effective lignin-first biorefining method to extract lignin as a stabilized oil from lignocellulosic biomass. To realize RCF at scale, process modeling has shown that minimizing the use of exogenous organic solvents is critical. To this end, here we investigate the ability of lignin-derived monomers to act as either solvents or cosolvents for RCF. We begin by examining the influence of lignin-derived aromatic compounds (4-propylguaiacol, 4-propylphenol, and propylbenzene) on RCF monomer yields and subsequently extend our analysis to mixtures of 4-propylguaiacol and either methanol or water. We demonstrate that 4-propylguaiacol is an effective solvent for lignin extraction and depolymerization during RCF, especially when used in combination with water as a cosolvent. Cosolvent mixtures of 4-propylguaiacol and water enable up to 81% lignin extraction, monomer yields up to 25 wt %, and postreaction phase separation. However, unlike methanol, water as a cosolvent fails to inhibit aromatic ring hydrogenation when conducted over Ru/C as a catalyst, potentially leading to excess hydrogen consumption in a process utilizing this approach. Nonetheless, these results suggest a promising strategy for eliminating external organic solvents from RCF by utilizing mixtures of lignin-derived compounds and water as alternative extraction solvents.

biorefining↗

DOE OSTI2026

Lignin-Derived Phenolic Compounds and Water Are Effective Cosolvents for Reductive Catalytic Fractionation

biorefining↗

DOE OSTI2026

Tabulated data for Lignin-Derived Phenolic Compounds and Water Are Effective Cosolvents for Reductive Catalytic Fractionation

biorefining↗

DOE OSTI2022

Bacterial exometabolites influence Chlamydomonas cell cycle and double algal productivity

Algal-bacterial interactions provide clues to algal physiology, but mutualistic interactions are complicated by dynamic exchange. In this study, we characterized the response of Chlamydomonas reinhardtii to the presence of a putative alga-benefitting commensal bacterium ( Arthrobacter strain ‘P2b’). Co-cultivation promoted chlorophyll content, biomass, average cell size, and number of dividing cells, relative to axenic cultures. Addition of bacterial spent medium (whole, size-fractionated and heat-treated) had similar effects, indicating P2b does not require algal interaction to promote growth. Nutrients and pH were excluded as putative effectors, collectively indicating a commensal interaction mediated by Arthrobacter -released small exometabolite(s). Proteogenomic comparison revealed similar response to co-cultivation and spent media, including differential cell cycle regulation, extensive downregulation of flagellar genes and histones, carbonic anhydrase and RubisCO downregulation, upregulation of some chlorophyll, amino acid and carbohydrate biosynthesis genes, and changes to redox and Fe homeostasis. Further, Arthrobacter protein expression indicated some highly expressed putative secondary metabolites. Together, these results revealed that low molecular weight bacterial metabolites can elicit major physiological changes in algal cell cycle regulation, perhaps through a more productive G1 phase, that lead to substantial increases in photosynthetically-produced biomass. This work illustrates that model commensal interactions can be used to shed light on algal response to stimulating bacteria.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2024

Sustainable aviation fuels from biomass and biowaste via bio- and chemo-catalytic conversion: Catalysis, process challenges, and opportunities

Sustainable aviation fuel (SAF) production from biomass and biowaste streams is an attractive option for decarbonizing the aviation sector, one of the most-difficult-to-electrify transportation sectors. Despite ongoing commercialization efforts using ASTM-certified pathways (e.g., lipid conversion, Fischer-Tropsch synthesis), production capacities are still inadequate due to limited feedstock supply and high production costs. New conversion technologies that utilize lignocellulosic feedstocks are needed to meet these challenges and satisfy the rapidly growing market. Combining bio- and chemo-catalytic approaches can leverage advantages from both methods, i.e., high product selectivity via biological conversion, and the capability to build C-C chains more efficiently via chemical catalysis. Herein, conversion routes, catalysis, and processes for such pathways are discussed, while key challenges and meaningful R&D opportunities are identified to guide future research activities in the space. Bio and chemo-catalytic conversion primarily utilize the carbohydrate fraction of lignocellulose, leaving lignin as a waste product. This makes lignin conversion to SAF critical in order to utilize whole biomass, thereby lowering overall production costs while maximizing carbon efficiencies. Thus, lignin valorization strategies are also reviewed herein with vital research areas identified, such as facile lignin depolymerization approaches, highly integrated conversion systems, novel process configurations, and catalysts for the selective cleavage of aryl C–O bonds. The potential efficiency improvements available via integrated conversion steps, such as combined biological and chemo-catalytic routes, along with the use of different parallel pathways, are identified as key to producing all components of a cost-effective, 100% SAF.

09 BIOMASS FUELS↗

NASA NTRS2019

Identification of Absorbing Aerosol Types at a Site in the Northern Edge of Indo-Gangetic Plain and a Polluted Valley in the Foothills of the Central Himalayas

Identification of atmospheric aerosol types and characterization of absorbing aerosols, based on AErosol RObotic NETwork (AERONET) data collected during 2013–2014 over two sites in Nepal: Lumbini in the northernmost part of central Indo-Gangetic Plain (IGP) and Kathmandu Valley in foothills of the central Himalayas, have been conducted in the present study. The relationship between four aerosol parameters; Extinction Angstrom Exponent (EAE), Absorption Angstrom Exponent (AAE), Single Scattering Albedo (SSA) and Real Refractive Index (RRI) was analyzed to study the aerosol types. This resulted in the identification of two types of aerosols concerning their origin: biomass burning and urban/industrial mix. Furthermore, to understand the absorbing aerosol types, the relationship between aerosol size parameters; Fine Mode Fraction (FMF) and Angstrom Exponent (AE), and aerosol absorption characteristics; SSA and AAE were investigated. In regards to the absorbing aerosol types, ‘Mostly BC’ was the dominant absorbing aerosol, over both sites, with comparatively negligible contribution from other absorbing aerosol types such as dust. The aerosol subtypes obtained from satellite-borne CALIPSO instrument supported the results derived from the AERONET data. The CALIPSO images also indicated that the aerosols over the foothills of the Himalayas could extend to the height of >5 km above the ground, which could be transported towards the Himalayan and Tibetan Plateau (HTP) region with sensitive ecosystems. The multi-sites based study of long-term records is required to elucidate the nature and trends of aerosols in the HTP region and any perturbation to the atmospheric environment and other environments in this region.

Aerosol types↗

DOE OSTI2025

Identifying the Best High‐Biomass Sorghum Hybrids Based on Biomass Yield Potential and Feedstock Quality Affected by Nitrogen Fertility Management Under Various Environments

The growing interest in high-biomass sorghum ( Sorghum bicolor L. Moench), hereafter referred to as sorghum, as a bioenergy feedstock in the United States requires an understanding of geographical adaptation to identify the most suitable hybrids for the Midwest. In this study, 13 sorghum hybrids (H1–H13) were evaluated for biomass yield potential in central and southern IL over two growing seasons (2022 and 2023). In addition to biomass yield, the effects of nitrogen (N) fertilization on yield, nutrient removal (N, P, and K), and feedstock composition (cellulose, hemicellulose, lignin, and soluble fractions) were determined to identify the best-performing sorghum hybrid across environmental gradients. The experimental design was a split-plot arrangement within a randomized complete block design with four replications at each of two locations: N rates (0 and 112 kg-N ha −1 ) as a whole plot factor and 13 sorghum hybrids as a subplot factor. As a result, complex genotypes (13 hybrids) by environment (2 sites and 2 years) and management (2 N rates) interactions were observed in biomass yield. The best hybrids at both sites were H1 (ATx2932/F10702_PSL) and H13 (TX08001), which were very photoperiod sensitive (PS). These hybrids produced superior biomass yield, and they also exhibited less nutrient removal and high energy-rich feedstock compositions (cellulose, hemicellulose, and lignin). Biomass yield potential was associated with morphological and phenological traits according to environmental conditions. Low-yielding hybrids were short-stature (H5 and H6) with pollinators (F10801_PSL-3dw and F10805_PSL-3dw) that are recessive at the Dw3 locus. Moderate PS hybrids (H7, H8, H11, and H12) that produced grain panicles at harvest showed high biomass yield plasticity and excessive nutrient removal as they accumulated high K concentrations in biomass tissues and high N and P in grain panicles.

09 BIOMASS FUELS↗

DOE OSTI2025

New Particle Formation Events Over the Southeast Atlantic Coincide With the African Biomass Burning Season

Abstract We investigated the occurrence and evolution of new particle formation (NPF) events over the southeast Atlantic. The studied region is under the influence of the long‐range transport of aerosols and gases during the southern African biomass burning season, from June to October every year. Interestingly, NPF was observed to coincide with the African biomass burning season, although wet removal of pre‐existing aerosols is needed during these NPF events. Surface and airborne measurements show that these NPF events likely occurred in the upper region of the marine boundary layer, and the newly formed aerosols were further transported to the surface via vertical air motions. Using a box model, we predicted that a large fraction of these particles could grow to sizes related to cloud condensation nuclei. Our study shows that NPF can occur over the southeast Atlantic, and the African biomass‐burning plume likely contributed to the NPF occurrence.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Low soil phosphorus availability triggers maize growth stage specific rhizosphere processes leading to mineralization of organic P

Phosphorus (P) is one of the essential nutrients for all living organisms. High-quality mineral P fertilizer is a finite resource with only an estimated 80-100 years of reserves remaining globally. Both plants and microbes have developed several mechanisms such as secretion of organic acids, acidification of the rhizosphere, and production of extracellular enzymes to enhance the acquisition of P from soils. Increased activity of phosphatase occurs in response to P deficiency as part of P starvation responses which catalyze the hydrolysis of P o from soil organic matter (SOM) and release inorganic P (P i ). However, the specific interactions between plants and microbial communities in the rhizosphere soil triggered by P deficiency are largely unknown. In a greenhouse study we grew maize plants in low and high P containing soils and examined the role of rhizosphere processes on mineralization of organic P (P o ) in soils with low and high P availability and different P speciation 23 (Po dominated versus P i dominated) and determine its effect on plant growth. Plant biomass was determined and rhizosphere soils, and soil samples from pots with and without plants were collected at key vegetative growth stages (VGS). A variety of biogeochemical parameters (e.g. microbial biomass C and P, potential phosphatase activities, plant biomass P, soil P species etc.) were determined using both conventional (sequential chemical extraction) and advanced (e.g. high resolution mass spectrometry (FTICR-MS) and 3129 P solution NMR) techniques. Here, we used phospholipid fatty acid (PLFA) and DNA based microbial community analysis to track changes in microbial community structure and diversity. Low P availability induced changes in biogeochemical processes and microbial community composition in the rhizosphere soils of plants grown in low P containing soil. At early VGS, the plants in low P soil were visually struggling which correlated with greater rhizosphere potential acid phosphatase activity and a reduction in P o fractions. At late VGS, the plants appeared to recover which correlated with a decrease in Meh (III) extractable P, an increase in microbial biomass C and P and greater total P in the plant biomass (roots, shoots and leaves). In high P containing soil, on the other hand, greater P availability masked these rhizosphere processes. Our results confirmed the degradation of SOM and Po mineralization in rhizosphere soils driven by microbe and plant need for P. P deficiency may have favored the abundance of fungi which utilized easily degradable root exudates for the production of extracellular enzymes responsible for the mineralize of SOM P o . This study highlights the intertwined mechanisms involved, and emphasizes the importance of, P o sources for plant nutrition and survival in marginal soils.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2023

Enzyme-assisted liquefaction for different fractions of corn stover pellets

With an increase in population, the world will depend on renewable sources to meet the increasing energy needs. The use of lignocellulosic biomass as a renewable source has been proven efficient for conversion to cellulosic ethanol and capable of contributing to thresholds for energy demand while reducing greenhouse gases by 90% when compared with fossil fuels. However, limitations in feeding and flow within biorefineries are encountered when system plugging occurs due to biomass compaction and a high yield stress for slurries formed during its processing. Furthermore, differences in the biomass source present a challenge to the continuity of operations and reliability in the process. This work explores enzyme-assisted liquefaction for solid loadings up to 30% as an alternative for the creation of slurry from two different types of biomass (pelleted corn stover and cobs) that were liquefied in a fed-batch process using commercial enzymes Celluclast 1.5L or Ctec-2 at 1FPU/g or 3 FPU/g of dry solids in a 10 mM sodium citrate buffer solution (pH 4.8). Pellets were fed into a 1 L stirred bioreactor according to a predefined fed-batch protocol during the first 5 hours until 30% solid loading was reached. After 6, 24 and 96 hours, samples were taken and characterized with respect to their composition, rheology, and water absorption. Successful slurry creation with dramatically reduced yield stress was achieved for corn stover for both enzymes assessed. Yield stresses of 178±7 Pa (3 FPU, Celluclast 1.5L) and 79±6 Pa (3 FPU, Ctec-2) were measured for corn stover at 24 hours, compared to 6,000 Pa for samples without enzyme. Yield stress was 155± 29 Pa (3FPU, Ctec-2) and 257 ± 72 Pa (1 FPU, Celluclast 1.5L) for corn cobs at 24 hours. A profile for 6, 24 and 96h of yield stress measurements and sugar conversion is presented.

Gutierrez, Diana↗

DOE OSTI2023

NMR relaxometry characterization of water adsorption in corn stover anatomical fractions

Nuclear magnetic resonance (NMR) relaxometry is applied to provide direct measurement of water adsorption in anatomical fractions of corn stover. NMR transverse T 2 relaxation time distribution measurements indicate multiple water populations, which vary with anatomical fraction and water adsorption. Measured T 2 data are used to calculate thermodynamic properties of Brunauer-Emmet-Teller adsorption theory using a model to estimate mono and bilayer relaxation. T 2 data are used directly to determine rotational diffusion correlation times indicating adsorption interaction strength. T 1 -T 2 longitudinal-transverse relaxation time correlation measurements quantify differences in the molecular level structural order of the adsorbate surface water as a function of water activity, i.e. relative humidity or water vapor partial pressure. The T 1 /T 2 ratio provides a measure of the surface energy related to the adsorption strength and surface diffusive mobility of the water adsorbate and differentiates the anatomical fractions. Furthermore, the results indicate that direct measurement of NMR relaxation times can be used to characterize corn stover biomass water adsorption, data relevant to processing and handling considerations.

09 BIOMASS FUELS↗

NASA NTRS2003

NASA Tech Briefs, May 2003

Topics covered include: Using Diffusion Bonding in Making Piezoelectric Actuators; Wireless Temperature-Monitoring System; Analog Binaural Circuits for Detecting and Locating Leaks; Mirrors Containing Biomimetic Shape-Control Actuators; Surface-Micromachined Planar Arrays of Thermopiles; Cascade Back-Propagation Learning in Neural Networks; Perovskite Superlattices as Tunable Microwave Devices; Rollable Thin-Shell Nanolaminate Mirrors; Flight Tests of a Ministick Controller in an F/A-18 Airplane; Piezoelectrically Actuated Shutter for High Vacuum; Bio-Inspired Engineering of Exploration Systems; Microscope Cells Containing Multiple Micromachined Wells; Electrophoretic Deposition for Fabricating Microbatteries; Integrated Arrays of Ion-Sensitive Electrodes; Model of Fluidized Bed Containing Reacting Solids and Gases; Membrane Mirrors With Bimorph Shape Actuators; Using Fractional Clock-Period Delays in Telemetry Arraying; Developing Generic Software for Spacecraft Avionics; Numerical Study of Pyrolysis of Biomass in Fluidized Beds; and Assessment of Models of Chemically Reacting Granular Flows.

Source record↗

DOE OSTI2021

BETO 2021 Peer Review - FCIC Task 6: High Temperature Conversion

The impacts of feedstock variability on pyrolysis processes are significant but poorly defined. Current engineering designs are based on empirical guidelines, useful only over a narrow range of feedstock properties. The objectives of this project are to (1) Develop science-based knowledge of how feedstock attributes and operational parameters impact pyrolysis process reliability and product quality; and (2) Build an experimental and computational toolset that predicts these outcomes, enabling processes to optimize reliability and product quality. Biomass is a complex feedstock. Controlling for and testing the effects of individual attributes is very challenging. This project couples multiscale experimentation and modeling to accurately capture the fundamental physics and chemistry of biomass flow and conversion behavior in feeding and pyrolysis reactor operations. Our focus is on pine residue attributes – anatomical fraction (bark, needles, wood), particle morphology (size/shape distribution, density, porosity), and chemical composition (extractives, biopolymers, alkali metals) – that impact product quality for downstream catalytic upgrading. Because detailed pyrolysis product characterization is limited, cutting-edge analytical techniques are being developed to reveal impactful product attributes. The tools and knowledge developed here will enable integrated pyrolysis-based processes that are more robust, flexible, and market-responsive with respect to feedstock variability.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2024

Influence of loblolly pine anatomical fractions and tree age on oil yield and composition during fast pyrolysis

Fast pyrolysis of woody materials is a technology pathway for producing renewable fuels and chemicals. This is a presentation of isolating needles, bark, and stemwood from a single tree as well as isolating stemwood and whole tree samples from the same species of tree with different ages and pyrolyzing each individually as well as in mixtures. This gives insight into the role of tree anatomical fractions on the resulting intermediate oil product as well as into interactions between these components. The highest carbon content oil (45.1 wt% as received) was produced from a one-to-one mixture of stemwood and needles, followed by the pure stemwood (43.4–43.8 wt% as received), while the lowest oil carbon content was from a one-to-one blend of bark and needles (26.7 wt% as received). The pyrolysis oil yield (combining oil and aqueous where separation occurred) varied from 54 wt% as received (needles) to 72.3 wt% as received (stemwood). When comparing trees of different ages, we find the change in the ratio of the anatomical fractions is a dominant factor in the product composition and yields, while the product composition and yields vary slightly with tree age when only the stemwood is pyrolyzed. Here, in this study, we present the bench-scale pyrolysis, yields, and product characterization of loblolly pine feedstocks (13- vs. 23 year-old, residues, air-classified residues, whole tree, needles, bark, and stemwood).

09 BIOMASS FUELS↗

DOE OSTI2022

Chapter 11: Biochar Production

In production of biochar, thermochemical processes that can be used to treat biomass include pyrolysis, gasification, hydrothermal processing, and combustion. Each of these processes is defined by specific operating conditions (e.g., temperature, presence of oxygen) and feedstock requirements for optimal conversion to the product of primary interest. Each process results in varying fractions of gaseous, liquid, and solid products. Though other publications have emphasized the gaseous bio-energy products of such processes (e.g., bio-oil, synthesis gas or "syngas") with biochar as a co-product, in this discussion, we focus primarily on biochar as the In production of biochar, thermochemical processes that can be used to treat biomass include pyrolysis, gasification, hydrothermal processing, and combustion. Each of these processes is defined by specific operating conditions (e.g., temperature, presence of oxygen) and feedstock requirements for optimal conversion to the product of primary interest. Each process results in varying fractions of gaseous, liquid, and solid products. Though other publications have emphasized the gaseous bio-energy products of such processes (e.g., bio-oil, synthesis gas or "syngas") with biochar as a co-product, in this discussion, we focus primarily on biochar as the main product, with heat and electrical energy as co-products of secondary interest. The reasons for this are as follows: when producing biochar, heat is the simplest form of energy to capture and utilize, electrical energy can be generated from heat energy with a wide range of available technologies small and large; rather than immediately combusting the gases released from biomass, there is potential to refine the gases into bio-oil and syngas. However, much larger investments of capital are needed to build facilities for which gaseous fuel production is the primary goal, as compared to those focused on biochar production with heat and electrical energy co-products. While the economic viability of biochar production will be improved by production of high-value co-products (e.g., wood acids for use in pesticides), the simplest production scheme is one in which biochar and heat are the primary products. Here we aim to provide a broader overview of thermochemical processes and technologies most relevant to biochar production in its current state of commercialization. All biochar is a result of pyrolysis (the reaction) but not all biochar is made with a dedicated pyrolysis reactor (the technology type). Further, all biochar is the result of a lack of complete combustion (the reaction), even biochar produced in a combustion or gasification reactor (the technology type). This is an important distinction to acknowledge in the following sections in which we discuss both thermochemical conversion reactions and technology types.

biochar↗

DOE OSTI2021

Sunlight-absorbing aerosol amplifies the seasonal cycle in low-cloud fraction over the southeast Atlantic

Abstract. The mean altitude of the smoke loading over the southeast Atlantic moves from the boundary layer in July to the free troposphere by October. This study details the month-by-month changes in cloud properties and the large-scale environment as a function of the biomass burning aerosol loading at Ascension Island (8∘ S, 14.5∘ W) from July to October, based on island measurements, satellite retrievals, and reanalysis. In July and August, the smoke loading predominantly varies within the boundary layer. During both months, the low-cloud fraction is less and is increasingly cumuliform when more smoke is present, with the exception of a late morning boundary layer deepening that encourages a short-lived cloud development. The meteorology varies little, suggesting aerosol–cloud interactions explain the cloudiness changes. September marks a transition month during which midlatitude disturbances can intrude into the Atlantic subtropics, constraining the free tropospheric aerosol closer to the African coast. Stronger boundary layer winds on cleaner days help deepen, dry, and cool much of the marine boundary layer compared to that on days with high smoke loadings, with stratocumulus reducing everywhere but at the northern deck edge. The September free troposphere is better mixed on smoky days compared to October. Longwave cooling rates, generated by a sharp water vapor gradient at the aerosol layer top, encourage a small-scale vertical mixing that could help maintain the well-mixed smoky September free troposphere. The October meteorology primarily varies as a function of the strength of the free tropospheric winds advecting aerosol offshore. The free tropospheric aerosol loading is less than in September, and the moisture variability is greater. Low-level clouds increase and are more stratiform in October when the smoke loadings are higher. The increased free tropospheric moisture can help sustain the clouds through a reduction in evaporative drying during cloud-top entrainment. Enhanced subsidence above the coastal upwelling region, increasing cloud droplet number concentrations, may further prolong cloud lifetime through microphysical interactions. Reduced subsidence underneath stronger free tropospheric winds at Ascension Island supports slightly higher cloud tops during smokier conditions. Overall, the monthly changes in the large-scale aerosol and moisture vertical structure act to amplify the seasonal cycle in low-cloud amount and morphology. This is climatically important, as cloudiness changes dominate changes in the top-of-atmosphere radiation budget.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS2001

Composition of Hydrothermal Vent Microbial Communities as Revealed by Analyses of Signature Lipids, Stable Carbon Isotopes and Aquificales Cultures

Extremely thermophilic microbial communities associated with the siliceous vent walls and outflow channel of Octopus Spring, Yellowstone National Park, have been examined for lipid biomarkers and carbon isotopic signatures. These data were compared with that obtained from representatives of three Aquificales genera. Thermocrinis ruber. "Thermocrinis sp. HI", Hydrogenobacter thermophilus TK-6, Aquifex pyrophilus and Aquifex aeolicus all contained phospholipids composed not only of the usual ester-linked fatty acids, but also ether-linked alkyls. The fatty acids of all cultured organisms were dominated by a very distinct pattern of n-C-20:1 and cy-C-21 compounds. The alkyl glycerol ethers were present primarily as CIS() monoethers with the expection of the Aquifex spp. in which dialkyl glycerol ethers with a boarder carbon-number distribution were also present. These Aquificales biomarker lipids were the major constituents in the lipid extracts of the Octopus Spring microbial samples. Two natural samples, a microbial biofilm growing in association with deposition of amorphous silica on the vent walls at 92 C, and the well-known 'pink-streamers community' (PSC), siliceous filaments of a microbial consortia growing in the upper outflow channel at 87 C were analyzed. Both the biofilm and PSC samples contained mono and dialkyl glycerol ethers with a prevalence of C-18 and C-20 alkyls. Phospholipid fatty acids were comprised of both the characteristic Aquificales n-C-20:1 and cy-C-21, and in addition, a series of iso-branched fatty acids from i-C-15:0 to i-C-21:0, With i-C-17:0 dominant in the PSC and i-C-19:0 in the biofilm, suggesting the presence of two major bacterial groups. Bacteriohopanepolyols were absent and the minute quantities of archaeol detected showed that Archaea were only minor constituents. Carbon isotopic compositions of the PSC yielded information about community structure and likely physiology. Biomass was C-13-depleted (10.9%) relative to available CO2 from the source water inorganic carbon pool with lipids further depleted by 6.3% relative to biomass The C-20-21 Aquificales fatty acids of the PSC were somewhat heavier than the iso-branched fatty acids. The carbon isotopic signatures of lipid biomarkers were also explored using a pure culture, T ruber, previously isolated from the PSC. Cells grown on C02 with O2 and both H2 and thiosulfate as electron donors were only slightly depleted (3.3%) relative to the C-source while cells grown on formate with O2 showed a major discrimination (19.7%), possibly the result of a metabolic branch point involving the assimilation of C-formate to biomass and the dissimilation to CO2 associated with energy production. T. ruber lipids were slightly heavier than biomass (+1.3%) whether cells were grown using CO2 or formate. Fatty acids from CO2 grown T. ruber cells were a so slightly heavier (average +2.1%) than biomass. The relatively depleted PSC C-20-21 fatty acids suggest that any associated Thermocrinis biomass would also be similarly depleted and much too light to be explained by growth on CO2. The C-fractionations determined with the pure culture suggest that growth of Thermocrinis in the PSC is more likely to occur on formate, presumably generated by geothermal activity. This study points to the value of the analysis of the structural and isotopic composition of lipid blomarkers both in pure culture studies, and in establishing community structure and physiology, as a complement to genomic profiles of microbial diversity. This is especially so when the members of the microbial community are novel and difficult to cultivate in the laboratory.

Jahnke, Linda L.↗

NASA NTRS2005

Surface Soil Changes Following Selective Logging in an Eastern Amazon Forest

In the Brazilian Amazon, selective logging is second only to forest conversion in its extent. Conversion to pasture or agriculture tends to reduce soil nutrients and site productivity over time unless fertilizers are added. Logging removes nutrients in bole wood, enough that repeated logging could deplete essential nutrients over time. After a single logging event, nutrient losses are likely to be too small to observe in the large soil nutrient pools, but disturbances associated with logging also alter soil properties. Selective logging, particularly reduced-impact logging, results in consistent patterns of disturbance that may be associated with particular changes in soil properties. Soil bulk density, pH, carbon (C), nitrogen (N), phosphorus (P), calcium (Ca), magnesium (Mg), potassium (K), iron (Fe), aluminum (Al), delta(sup 3)C, delta(sup 15)N, and P fractionations were measured on the soils of four different types of loggingrelated disturbances: roads, decks, skids, and treefall gaps. Litter biomass and percent bare ground were also determined in these areas. To evaluate the importance of fresh foliage inputs from downed tree crowns in treefall gaps, foliar nutrients for mature forest trees were also determined and compared to that of fresh litterfall. The immediate impacts of logging on soil properties and how these might link to the longer-term estimated nutrient losses and the observed changes in soils were studied.

Olander, Lydia P.↗