Search NASA⌕ Search

SEARCH · Search NASA

Results for “CITRIC ACID”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Responses of amino acids in hindlimb muscles to recovery from hypogravity and unloading by tail-cast suspension

Amino acids were assayed in muscles from rats exposed to 7 days of hypogravity and 12 h of gravity (F) or 6 days of suspension with (R) or without (H) 12 h of loading. In these groups, lower aspartate was common only to the soleus (SOL) relative to control muscles, the smallest difference being in group R. This difference in aspartate for F and H, but not for R, correlated with lower malate suggesting diminution of citric acid cycle intermediates. The R SOL value was increased over the H SOL. Therefore desite 12 h of loading, the F SOL was more comparable to the H SOL. The role of stress in preventing recovery of the F SOL was apparent from the ratios of glutamine/glutamate. Synthesis of glutamine is enhanced by glucocorticoids and is reflected by an increased ratio. In 5 of the 6 F muscles studied, this ratio was greater than in controls. In contrast, the ratio in all R muscles was similar to controls and showed recovery from the values in H muscles. Hence the post-flight treatment of F rats may have produced additional stress. Despite this stress, in some respects the SOL responses to hypogravity were similar to its responses to unloding by suspension.

Tischler, M. E.↗

Rhizosphere carbon deposition, oxidative stress and nutritional changes in two poplar species exposed to aluminum

Species and hybrids in the genus Populus have become the focus of investigation for use in biofuels production and their capacity to sequester carbon (C) in the environment. The identification of species resistant to marginal edaphic sites may be important in both of these endeavors. Plant growth, total dissolved organic carbon (TOC) and low molecular weight organic acid (OA) production, antioxidative enzyme activities and mineral content were assessed in Populus tremuloides L. and Populus trichocarpa Torr. & Gray seedlings under exposure to aluminum (Al). Both species were sensitive to Al, with significant reductions in shoot and root biomass at and above 50 lM Al. Exposure to Al induced 40-fold increases in TOC deposition in P. tremuloides and 100-fold increases in P. trichocarpa. In P. tremuloides, Al treatment induced root exudation of malic and citric acids, while Al increased exudation of citrate and oxalate in P. trichocarpa. Organic acids accounted for 20-64% of total C released upon Al exposure, with the proportion of OAs increasing in P. tremuloides and decreasing in P. trichocarpa. Dose dependent responses of catalase and ascorbate peroxidase were observed in both root and leaf tissues, indicating that Al exposure induced oxidative stress in poplar. Treatment at and above 100M Al reduced the concentrations of calcium (Ca) and magnesium (Mg) in roots and leaves, whereas Al at or above 50M reduced root and leaf phosphorous (P) concentrations. The majority of Al taken up was retained in the root system. Even with the induction of OA exudation and accumulation, P. tremuloides and P. trichocarpa remained sensitive to Al, as evidenced by elevated antioxidative enzyme activities, which may reflect inhibition of Ca or P uptake and destabilization of cell homeostasis in these poplar species. Although plants exhibited reductions in growth and evidence of oxidative and nutritional stress, total C rhizodeposition rates for both species increased with increasing Al exposure concentration. Estimated C deposition rates of 16 mg C/plant/day were four-times larger than previously reported values for forest tree species, indicating that edaphic stress plays an important role in C flux to the rhizosphere.

54 ENVIRONMENTAL SCIENCES↗

Triiodothyronine activates lactate oxidation without impairing fatty acid oxidation and improves weaning from extracorporeal membrane oxygenation

Background: Extracorporeal membrane oxygenation (ECMO) provides a rescue for children with severe cardiac failure. We previously showed that triiodothyronine (T3) improves cardiac function by modulating pyruvate oxidation during weaning. This study was focused on fatty acid (FA) metabolism modulated by T3 for weaning from ECMO after cardiac injury. Methods: Nineteen immature piglets (9.1-15.3 kg) were separated into 3 groups with ECMO (6.5 hours) and wean: normal circulation (Group-C);transient coronary occlusion (10 minutes) followed by ECMO (Group-IR); and IR with T3 supplementation (Group-IR-T3). 13-Carbon labeled lactate, medium-chain and long-chain FAs were infused as oxidative substrates. Substrate fractional contribution to the citric acid cycle (FC) was analyzed by 13-Carbon nuclear magnetic resonance. Results: ECMO depressed circulating T3 levels to 40% baseline at 4 hours and were restored in Group-IR-T3. Group-IR decreased cardiac power, which was not fully restorable and 2 pigs were lost because of weaning failure. Group-IR also depressed FC-lactate, while the excellent contractile function and energy efficiency in Group-IR-T3 occurred along with a marked FC-lactate increase and [ATP]/[ADP] without either decreasing FC-FAs or elevating myocardial oxygen consumption over Group-C or -IR. Conclusions: T3 releases inhibition of lactate oxidation following ischemia-reperfusion injury without impairing FA oxidation. These findings indicate that T3 depression during ECMO is maladaptive, and that restoring levels improves metabolic flux and enhances contractile function during weaning.

ECMO↗

THYROID HORMONE REVERSES AGING-INDUCED MYOCARDIAL FATTY ACID OXIDATION DEFECTS AND IMPROVES THE RESPONSE TO ACUTELY INCREASED AFTERLOAD

Background: Subclinical hypothyroidism occurs during aging in humans and mice and may contribute to development of heart failure. Aging also impairs myocardial fatty acid oxidation, causing increased reliance on flux through pyruvate dehydrogenase (PDH) to maintain function. We hypothesize that the metabolic changes in aged hearts make them less tolerant to acutely increased work and that thyroid hormone reverses these defects. Methods: Studies were performed on young (Young, 4-6 months) and aged (Old, 22-24 months) C57/BL6 mice at standard (50 mmHg) and high afterload (80 mmHg). Another aged group received thyroid hormone for 3 weeks (Old-TH, high afterload only). Function was measured in isolated working hearts along with substrate fractional contributions (Fc) to the citric acid cycle (CAC) using perfusate with 13C labeled lactate, pyruvate, glucose and unlabeled palmitate and insulin. Results: Cardiac function was similar between Young and Old mice at standard afterload. Palmitate Fc was reduced but no individual carbohydrate contributions differed. CAC and individual substrate fluxes decreased in aged. At high afterload, -dP/dT was decreased in Old versus Young. Similar to low afterload, palmitate Fc was decreased in Old. Thyroid hormone reversed aging-induced changes in palmitate Fc and flux while significantly improving cardiac function. Conclusion: The aged heart shows diminished ability to increase cardiac work due to substrate limitations, primarily impaired fatty acid oxidation. The heart accommodates slightly by increasing efficiency through oxidation of carbohydrate substrates. Thyroid hormone supplementation in aged mice significantly improves cardiac function potentially through restoration of fatty acid oxidation.

Environmental Molecular Sciences Laboratory↗

Integrated Anaerobic Membrane Bioreactor (AnMBR) – electro assisted fermentation platform for total resource recovery from diverse wastewaters

The overall objective of the project was to demonstrate a successful wastewater resource recovery platform comprising an Anaerobic Membrane Bioreactor (AnMBR) to achieve >50% Carbon sequestration efficiency as Volatile Fatty Acids (VFAs) or as methane gas from agricultural (animal feeding operations) wastewater along with the generation of final water exceeding Biological Nutrient Removal (BNR) standards for indirect potable reuse by coupling with constructed wetlands has been successfully accomplished. The AnMBR achieved stable performance over 350 days, removing 80–90% of COD and BOD₅ and recovering methane (0.17±0.07 L CH4/g COD at 66.5±0.03% v/v) at 3-5 LMH flux and 5-9 days HRT with 3-5% w/v total solids. Phosphorus recovery via CaO addition in an 80-L coagulation-flocculation-sedimentation unit ranged from 40.6% to 99.7%, yielding products with 11.4–13.6% P content and citric acid solubility of 32–38.6% P, comparable to rock phosphate mineral. Ammonium adsorption achieved ~94.5% recovery with exchange capacity of 10 – 16 g NH4-N/kg clinoptilolite. The CW polishing step met Kansas discharge standards for BOD5 and TN (<30 and <10 mg /L,) and approached the TP standard (~2.5 – 4 mg P/L). These findings have either already resulted in two peer reviewed publications, two patent applications, and one publication in conference proceedings.

42 ENGINEERING↗

The effect of caustic soda treatment to recover rare earth elements from secondary feedstocks with low concentrations

Caustic soda (NaOH) treatment has enhanced rare earth element (REE) extraction from monazite. Here, this study examined the effectiveness of caustic soda for RE-phosphates with lower concentrations for extraction from coal overburden, an alternative feedstock derived from mining waste. Pourbaix (Eh-pH) diagrams were constructed for La, Ce, Nd, Eu, and Y-PO 4 -H 2 O systems to understand the thermodynamics of NaOH-facilitated acid leaching for low-concentration RE-phosphates and oxides and to elucidate the difference in recoveries among individual REEs. The Eh-pH diagrams indicated that low crystallinity is beneficial for extraction. Nd was thermodynamically most favorable for the extraction process among the five elements examined, and Y was the least promising. Experiments were conducted using three Pennsylvania coal overburden samples to validate the effect of caustic soda on rare earth leaching. The experimental results showed that for NaOH (6 M), a leaching time of 2 h at 125 °C was sufficient to obtain twice the recovery values compared to those without the NaOH treatment. After implementing the caustic soda treatment, a high total REE recovery (>60%), especially for Nd and Pr, could be achieved with diluted HCl and more environmentally friendlier citric acid. The results were similar for both coarse and fine particles. This novel approach is likely to improve the feasibility of REE extraction from coal-associated feedstock in a more environmentally benign manner.

42 ENGINEERING↗

Synthesis of Carbon Dots with Multiple Color Emission by Controlled Graphitization and Surface Functionalization

Multiple-color-emissive carbon dots (CDots) have potential applications in various fields such as bioimaging, light-emitting devices, and photocatalysis. The majority of the current CDots to date exhibit excitation-wavelength-dependent emissions with their maximum emission limited at the blue-light region. In this paper, a synthesis of multiple-color-emission CDots by controlled graphitization and surface function is reported. The CDots are synthesized through controlled thermal pyrolysis of citric acid and urea. By regulating the thermal-pyrolysis temperature and ratio of reactants, the maximum emission of the resulting CDots gradually shifts from blue to red light, covering the entire light spectrum. Specifically, the emission position of the CDots can be tuned from 430 to 630 nm through controlling the extent of graphitization and the amount of surface functional groups, –COOH. The relative photoluminescence quantum yields of the CDots with blue, green, and red emission reach up to 52.6%, 35.1%, and 12.9%, respectively. Furthermore, it is demonstrated that the CDots can be uniformly dispersed into epoxy resins and be fabricated as transparent CDots/epoxy composites for multiple-color- and white-light-emitting devices. Finally, this research opens a door for developing low-cost CDots as alternative phosphors for light-emitting devices.

36 MATERIALS SCIENCE↗

Carbon fiber/epoxy vitrimer composite patch cured with bio‐based curing agents for one‐step repair metallic sheet and its recyclability

Abstract Vitrimers have gained a great deal of attention from researchers, yet research on its application is still lacking. This study, a novel bio‐based vitrimer was developed from epoxy (EP) and bio‐based curing agents, that is, cashew nut shell liquid (CNSL) and citric acid (CA), and then reinforced by carbon fiber. The vitrimers with different ratios of acid to epoxy (R ratio) at 0.30–0.40 contained ester and ether linkages. All EP/CA/CNSL vitrimers showed the stress relaxation over 70–100°C due to transesterification. The vitrimers were applied as polymer matrices for the carbon fiber composites and then used as repair patches. By using the carbon fiber‐reinforced vitrimer with the R ratio of 0.30, patch repair on a damaged alloy sheet revealed that approximately 98% of the tensile strength of the damaged alloy sheet was recovered. The vitrimer can be dissolved from carbon fiber composite to recover carbon fiber. The recovered carbon fiber retained good tensile strength compared to the pristine composite. Based on this study, the EP/CA/CNSL vitrimers showed the comparable thermomechanical properties with the epoxy vitrimer cured by the petroleum‐based curing agent. The vitrimer composite patch could therefore be an alternative new repair method to extend the service life of damaged structures.

Lorwanishpaisarn, Narubeth↗

Divergent Responses of Carbon Nitride Dot‐Based Amorphous Species and Small Molecule Hybrids to Trace Level Analytes

Bottom-up synthesis of carbon nitride dots (CNDs) offers a versatile platform for the creation of diverse nanomaterials with tunable properties. Here, we report a facile hydrothermal approach using citric acid (CA) and urea (U) as precursors to synthesize CNDs with varying degrees of condensation and crystallinity. By carefully controlling reaction conditions and post-synthetic treatments, we obtained two distinct fractions: a polycrystalline fraction composed of small-molecule hybrids and an amorphous fraction containing CNDs. We then sought to understand how the dominant species in these fractions impact sensing abilities using trace-level explosive exemplars. In conclusion, the results have important implications for sensing and related applications where understanding the complex interplay between synthetic conditions and post-synthetic processing play vital roles in determining the final properties of CND materials.

carbon nitride dots↗

Controlled One‐pot Synthesis of Nickel Single Atoms Embedded in Carbon Nanotube and Graphene Supports with High Loading

Abstract Single‐atom catalysts (SACs) have attracted much attentions due to the advantages of high catalysis efficiency and selectivity. However, the controllable and efficient synthesis of SACs remains a significant challenge. Herein, we report a controlled one‐pot synthesis of nickel single atoms embedded on nitrogen‐doped carbon nanotubes (NiSA−N−CNT) and nitrogen‐doped graphene (NiSA−N−G). The formation of NiSA−N−CNT is due to the solid‐to‐solid rolling up mechanism during the high temperature pyrolysis at 800 °C from the stacked and layered Ni‐doped g‐C 3 N 4 , g‐C 3 N 4 −Ni structure to a tubular CNT structure. Addition of citric acid introduces an amorphous carbon source on the layered g‐C 3 N 4 −Ni and after annealing at the same temperature of 800 °C, instead of formation of NiSA−N−CNT, Ni single atoms embedded in planar graphene type supports, NiSA−N−G were obtained. The density functional theory (DFT) calculation indicates the introduction of amorphous carbon source substantially reduces the structure fluctuation or curvature of layered g‐C 3 N 4 ‐Ni intermediate products, thus interrupting the solid‐to‐solid rolling process and leading to the formation of planar graphene type supports for Ni single atoms. The as‐synthesized NiSA−N−G with Ni atomic loading of ∼6 wt% catalysts shows a better activity and stability for the CO 2 reduction reaction (CO 2 RR) than NiSA−N−CNT with Ni atomic loading of ∼15 wt% due to the open and exposed Ni single atom active sites in NiSA−N−G. This study demonstrates for the first time the feasibility in the control of the microstructure of carbon supports in the synthesis of SACs.

Zhao, Shiyong↗

Biomanufacturing: history and perspective

Abstract Biomanufacturing is a type of manufacturing that utilizes biological systems (e.g., living microorganisms, resting cells, animal cells, plant cells, tissues, enzymes, or in vitro synthetic (enzymatic) systems) to produce commercially important biomolecules for use in the agricultural, food, material, energy, and pharmaceutical industries. History of biomanufacturing could be classified into the three revolutions in terms of respective product types (mainly), production platforms, and research technologies. Biomanufacturing 1.0 focuses on the production of primary metabolites (e.g., butanol, acetone, ethanol, citric acid) by using mono-culture fermentation; biomanufacturing 2.0 focuses on the production of secondary metabolites (e.g., penicillin, streptomycin) by using a dedicated mutant and aerobic submerged liquid fermentation; and biomanufacturing 3.0 focuses on the production of large-size biomolecules—proteins and enzymes (e.g., erythropoietin, insulin, growth hormone, amylase, DNA polymerase) by using recombinant DNA technology and advanced cell culture. Biomanufacturing 4.0 could focus on new products, for example, human tissues or cells made by regenerative medicine, artificial starch made by in vitro synthetic biosystems, isobutanol fermented by metabolic engineering, and synthetic biology-driven microorganisms, as well as exiting products produced by far better approaches. Biomanufacturing 4.0 would help address some of the most important challenges of humankind, such as food security, energy security and sustainability, water crisis, climate change, health issues, and conflict related to the energy, food, and water nexus.

Zhang, Yi-Heng Percival↗

The Effect of Membrane Structure Prepared from Carboxymethyl Cellulose and Cellulose Nanofibrils for Cationic Dye Removal

Water-stable and eco-friendly membranes were fabricated from carboxymethyl cellulose (CMC) acting as anionic adsorbent and cellulose nanofibrils (CNFs) as strengthening filler by solvent- and unidirectional freeze-casting processes, both supported with simultaneous citric acid (CA) mediated cross-linking. Spectroscopic, thermogravimetric and potentiometric titration techniques were applied to evaluate the efficacy of the cross-linking as well as to quantify the processing-dependant surface charge. In addition, the CMC/CNF assembling and membrane porosity were identified microscopically as the combinatorial effect of components ratio and the applied fabrication technique. Finally, the membrane’s cationic dyes adsorption capacity and kinetic were evaluated depending on the dyes ionization constants, solution pH, and the contact time using batch equilibrium experiment, and further evaluated for filtration performance at optimal pH. The resulting, freeze-casted membranes demonstrate anisotropic to isotropic and highly (> 90%) porous structures with gradient pore sizes (from few nm up to 200 µm range). This provides relatively high and stable flux rates (150–190 kL/m{sup 2} h MPa) with ~ 100% cationic dye adsorption, fast dynamic (8.536–5.446 kg/g min) and capacity (1828–1398 g/kg), which highlight their potential in dead-end filtration technologies without need for additional separation step. The similar dye adsorption capacity was assessed for denser and nano-porous (< 50 nm) solvent-casted membranes, however, with much lower and time-declining flux rates (100–10 L/m{sup 2} h MPa), demonstrating their potential usage in spiral wound-cross-flow modules. Both types of membranes anyhow showed high dye removal capacity (≥ 90%) even after 4th (solvent-casted) and 50th (freeze-casted) reusing cycle, present a high-value alternative to commercial activated carbons or other bio-nano-absorbents.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis of β-Cyclodextrin Immobilized Starch and Its Application for the Removal of Dyestuff from Waste-Water

A natural polymeric adsorbent, β-cyclodextrin immobilized starch (CS-βCD) was prepared by introducing host functional molecule β-cyclodextrin (β-CD) onto starch in presence of citric acid. The immobilization conditions were optimized to: m CA:m CS = 1:2, reaction time of 2 h and reaction temperature at 120 °C, by varying the input levels of the reactant, CS-βCD with a series of immobilization ratio (IR) and carboxyl content (CC) could be obtained. The FT-IR and {sup 13}C-NMR analysis indicated the β-CD molecules have been immobilized onto starch via the formation of ester linkages. The XRD and SEM analysis showed CS-βCD had more looser structure and more irregular surface compared with native starch. The GPC analysis showed CS-βCD had a reduced molecular weight but a more complicated molecular configuration. The adsorbing capacities of CS-βCD to three cationic dyes (methylene blue, methyl purple and basic fuchsin) were significantly improved compared with native starch, diatomite and zeolite. The adsorption behaviors of CS-βCD to the three dyes had high fitting degrees to both Langmuir and Freundlich models (R{sup 2} > 0.98). The decolourization ratio of CS-βCD to the mixed dyestuff waste-water had reached 88.75%, which was much higher than other absorbents. The results indicated the CS-βCD would become a high-efficiency dyestuff adsorbent, and would have a promising application in the industrial dyestuff waste-water treatment.

36 MATERIALS SCIENCE↗

Structural Confinement Assisted a Robust Superparamagnetic State in MgNi{sub 2}O{sub 3} and MgNi{sub 1.5}Co{sub 0.5}O{sub 3} Nanoparticles at Room Temperature

In this study, ideal spherical-shaped cubic metal oxide nanoparticles of < 30 nm in size were prepared by a citric acid sol-gel combustion method. The detailed structural analysis and microscopic techniques clearly support the existing grade of structural confinement effect in MgNi{sub 2}O{sub 3} and MgNi{sub 1.5}Co{sub 0.5}O{sub 3}. Temperature-dependent magnetisation studies at various applied fields revealed a moderate change of T{sub B} near room temperature by distinct particle size. Magnetic crystalline anisotropy and energy barrier density theoretical model results suggested the importance of innermost magnetic particle stability-aided spin orientation with a fascinating magnetic moment in superparamagnetic region exerted by Ni and Co remarkably postured as a significant part of these nanoparticles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tuning the Magnetic Properties of ZnFe{sub 2}O{sub 4} Nanoparticles Through Partial Doping and Annealing

The aim of this study was to investigate the effect of annealing temperature and cobalt cation (Co{sup 2+}) doping on the magnetic properties of zinc ferrite (ZFO) nanoparticles. The nanoparticles were prepared through sol-gel combustion process with citric acid as the fuel. The obtained nanoparticles were annealed at several temperatures from 300 to 1000 °C for 2 h. Spinel formation was proved by X-ray diffraction (XRD) patterns, and the average crystallite size in all samples was estimated between 22 and 32 nm. It is worthwhile to mention that Fe{sub 2}O{sub 3} and ZnO are detected as the medium phases. Meanwhile, Fe{sub 2}O{sub 3} phase transformation to the other allotropes has happened around 400 °C and was characterized via the simultaneous thermal analysis (STA) and XRD. For higher annealing temperatures, diffusion has gradually been completed and, finally, the single phase of spinel structure was prepared at 1000 °C. In addition, field-emission scanning electron microscopy (FESEM) images revealed that the nanoparticle size after annealing was between 30 and 200 nm for the whole samples. The formation of the spinel phase was considered the most important factor on the magnetic properties of ZFO. Cobalt doping, annealing temperature, and also Fe{sub 2}O{sub 3} phase were the main factors on changing magnetic properties. Paramagnetic nanoparticles with higher coercivity for doped samples rather than un-doped samples have been obtained.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural, Morphological, Raman, and Mössbauer Studies on (La{sub 0.8}Ca{sub 0.2}){sub 1−x}Bi{sub x}FeO{sub 3} (x = 0.0, 0.1, and 0.2) Compounds

(La{sub 0.8}Ca{sub 0.2}){sub 1−x}Bi{sub x}FeO{sub 3} (x = 0.0, 0.1, and 0.2) compounds were prepared by the sol-gel method, using the citric acid route. Structural and microstructural characteristics of the samples were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Raman spectroscopy. Mössbauer spectroscopy was also used for magnetic characterization and structural confirmation of X-ray data. Refinement of XRD patterns indicated that the compounds crystallize in an orthorhombic structure, Pnma space group. The SEM measurements showed that the morphology of the samples is characterized by the existence of large agglomerates, while TEM confirmed the fine particle size. Raman spectra revealed that, when increasing temperature, the level of oxygen species adsorbed at the surface of the particles increases progressively. Room temperature Mössbauer spectroscopy data revealed the existence of two octahedral magnetic sites in the structure of the compounds, which is compatible with XRD data, and a small percentage of a paramagnetic phase in the samples, which increases with Bi-content.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical, Structural, and Thermal Properties of Ferrite/Superconductor (Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4}){sub x}/YBa{sub 2}Cu{sub 3}O{sub 7-δ}) Nanocomposite Materials

The superconductor YBa{sub 2}Cu{sub 3}O{sub 7-δ} (Y123) is prepared by the solid-state route, while the nanosized Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} (Ni-Zn ferrite) is synthesized via citric acid sol-gel technique. The composite material of the type (Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4}){sub x}/YBa{sub 2}Cu{sub 3}O{sub 7-δ}, where x = 0.00, 0.03, 0.10, and 0.50 wt%, is prepared by a modified solid-state method to study the effect of doping Ni-Zn nanosized ferrite on the superconducting, structure, and thermal properties of Y123. The prepared samples show Meissner effect which confirmed the presence of superconducting phase at liquid nitrogen temperature (77 K). The prepared samples have been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersion of X-ray (EDX), infra-red (IR) spectroscopy, thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), DC resistance by four-probe, and critical current density measurements. It was found that by increasing Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} nanoparticles in the Y123 compound, the unit cell volume of the orthorhombic phase decreases, but the transition temperature T{sub c} and critical current density J{sub c} decrease for low doping (x = 0.03 wt%) then increase (x = 0.10 and 0.50 wt%) for Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} doped in Y123. The transport properties of the (Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4}){sub x}/YBa{sub 2}Cu{sub 3}O{sub 7}-{sub δ} composite as electrical resistance R, T{sub c}, and J{sub c} are interpreted according to Bean’s critical state model and charge-vortex interaction combined with vortex pinning in Y123 high-T{sub c} mixed-state type-II superconductor. Highlights: The critical current density J{sub c} decreased for low doping of nanosized Ni-Zn ferrite into Y123 with ratio of 0.03 wt% and increased by increasing doping ratio to 0.50 wt%. The physical properties are improved by the coexistence of the superconductor Y123 and nanosized Ni-Zn ferrites in nanocomposite material.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effects of Voltage on Microstructure and Corrosion Resistance of Micro-arc Oxidation Ceramic Coatings Formed on KBM10 Magnesium Alloy

Micro-arc oxidation (MAO) coatings on KBM10 magnesium alloy were prepared in an electrolyte system with sodium silicate, potassium hydroxide, sodium tungstate, and citric acid. The effects of voltage on the microstructure and corrosion resistance of MAO coatings were studied using stereoscopic microscopy, scanning electron microscopy, x-ray diffraction, scratch tests, potentiodynamic polarization, and electrochemical impedance spectroscopy. The results showed that the roughness of the MAO coatings, diameter, and number of pores increase with the increase in voltage. The coating formed at the voltage of 350 V exhibited the best adhesive strength when evaluated by the automatic scratch tester. The coatings were mainly composed of MgO, MgWO{sub 4}, and Mg{sub 2}SiO{sub 4}, and the content of Mg{sub 2}SiO{sub 4} increased with the increase in voltage. The corrosion resistance of MAO coatings could be improved by changing the applied voltage, and the best corrosion resistance of MAO coating was observed at the voltage of 350 V.

36 MATERIALS SCIENCE↗