Search NASA⌕ Search

SEARCH · Search NASA

Results for “CMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Study of the B{sub s} meson with forthcoming LHC data at CMS

A study of the properties of the B{sub s} meson decays has been done using a full Monte Carlo simulation of the CMS detector. The CMS pixel detector allows a precise measurement of the B{sub s} decay vertices which are displaced from the proton-proton interaction point. This facilitates a time dependent analysis of the angular correlations between the B{sub s} decay products. In particular, the decay B{sub s{yields}}(J/{psi}){phi}{yields}{mu}{sup +{mu}-}K{sup +}K{sup -} enables measurements of the width difference between heavy and light mass eigenstates. Furthermore, it permits a measurement of the CP violating phase {phi}{sub s} which is sensitive to physics beyond the Standard Model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

CMS: First Results

A summary of the LHC and CMS detector performance is given and the first CMS results are presented. In particular, emphasis will be given to low-p{sub t} QCD Physics including charged hadron spectra, the measurement of Bose-Einstein (BEC) and angular Correlations, and of underlying event properties.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Reconstruction and selection of Z{yields}{tau}{tau}{yields}{mu}+{tau}-jet+{nu}'s decays at the CMS experiment

At the LHC, tau leptons are expected in final states of many important physics processes including Supersymmetry and the production of Higgs boson(s) and other exotic particles. An efficient and accurate {tau} reconstruction and identification are therefore an important part of the CMS physics programme. Z{sup 0}{yields}{tau}{sup +}{tau}{sup -} decays are often considered the ''standard candle'' of tau reconstruction as they validate tau lepton identification and provide a test bench for Higgs searches (for which they constitute the main irreducible background). We describe techniques for selecting and reconstructing the Z{sup 0}{yields}{tau}{sup {+-}}{tau}{sup {-+}}{yields}{mu}{sup {+-}}{nu}{sub {mu}}{bar {nu}}{sub {tau}}({bar {nu}}{sub {mu}}{nu}{sub {tau}})+{tau}-jet{sup {-+}}{nu}{sub {tau}}({bar {nu}}{sub {tau}}) events that were developed for the measurement of the Z production cross-section by the CMS experiment using 200 pb{sup -1} of the LHC collision data at the center-of-mass energy {radical}(s) 10 TeV. We validate these techniques using simulated events and present a data-driven method for estimating background contributions to this measurement.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurements of associated production of vector bosons and heavy flavours with the CMS detector

Thanks to its excellent lepton reconstruction and secondary vertex identification, the CMS detector gives a unique possibility to study processes involving the production of a vector boson in association with heavy quarks. These kind of final states are background to many channels of new physics, as well as Standard Model Higgs searches. Moreover, theoretical predictions about these processes have different approaches and large uncertainties making a test of these predictions even more important. Here different measurements related to this topic are presented, based on the data collected in 2010 and 2011 runs by the CMS detector, namely the inclusive production of Z+b(b) jets and the agular correlation of B-hadron pairs.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Implications of CMS analysis of photon-photon interactions for photon PDFs

As part of a recent analysis of exclusive two-photon production of W + W – pairs at the LHC, the CMS experiment used di-lepton data to obtain an “effective” photon-photon luminosity. We show how the CMS analysis on their 8 TeV data, along with some assumptions about the likelihood for events in which the proton breaks up to pass the selection criteria, can be used to significantly constrain the photon parton distribution functions, such as those from the CTEQ, MRST, and NNPDF collaborations. We compare the data with predictions using these photon distributions, as well as the new LUXqed photon distribution. We study the impact of including these data on the NNPDF2.3QED, NNPDF3.0QED and CT14QEDinc fits. We find that these data place a useful and complementary cross-check on the photon distribution, which is consistent with the LUXqed prediction while suggesting that the NNPDF photon error band should be significantly reduced. Additionally, we propose a simple model for describing the two-photon production of W + W – at the LHC. In conclusion, using this model, we constrain the number of inelastic photons that remain after the experimental cuts are applied.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DAQExpert - An expert system to increase CMS data-taking efficiency

The efficiency of the Data Acquisition (DAQ) of the Compact Muon Solenoid (CMS) experiment for LHC Run 2 is constantly being improved. A significant factor affecting the data taking efficiency is the experience of the DAQ operator. One of the main responsibilities of the DAQ operator is to carry out the proper recovery procedure in case of failure of data-taking. At the start of Run 2, understanding the problem and finding the right remedy could take a considerable amount of time (up to many minutes). Operators heavily relied on the support of on-call experts, also outside working hours. Wrong decisions due to time pressure sometimes lead to an additional overhead in recovery time. To increase the efficiency of CMS data-taking we developed a new expert system, the DAQExpert, which provides shifters with optimal recovery suggestions instantly when a failure occurs. DAQExpert is a web application analyzing frequently updating monitoring data from all DAQ components and identifying problems based on expert knowledge expressed in small, independent logic-modules written in Java. Its results are presented in real-time in the control room via a web-based GUI and a sound-system in a form of short description of the current failure, and steps to recover.

Andre, J. M.↗

Precision Timing with the CMS MIP Timing Detector

The Compact Muon Solenoid (CMS) detector at the CERN Large Hadron Collider (LHC) is undergoing an extensive Phase II upgrade program to prepare for the challenging conditions of the High Luminosity LHC (HL-LHC). A new timing layer is designed to measure minimum ionizing particles (MIPs) with a time resolution of 30 ps and hermetic coverage up to a pseudo-rapidity of |η|=3. This MIP Timing Detector (MTD) will consist of a central barrel region based on LYSO:Ce crystals read out with SiPMs and two end-caps instrumented with radiation-tolerant Low Gain Avalanche Detectors (LGADs). The precision time information from the MTD will reduce the effects of the high levels of pile-up expected at the HL-LHC and will bring new and unique capabilities to the CMS detector. The time information assigned to each track will enable the use of 4D-vertexing which will render a 5-fold pile-up reduction thus recovering the current conditions. Precision timing will also enable new time-based isolations and improved b-tagging algorithms. All of this translates into a 20% gain in effective luminosity when looking at di-Higgs boson events decaying to a pair of b-quarks and two photons. We present the current status and ongoing R&D of the MTD, including implications on the physics reach at the HL-LHC and test beam results.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

High Level Trigger Configuration and Handling of Trigger Tables in the CMS Filter Farm

The CMS experiment at the CERN Large Hadron Collider is currently being commissioned and is scheduled to collect the first pp collision data in 2008. CMS features a two-level trigger system. The Level-1 trigger, based on custom hardware, is designed to reduce the collision rate of 40 MHz to approximately 100 kHz. Data for events accepted by the Level-1 trigger are read out and assembled by an Event Builder. The High Level Trigger (HLT) employs a set of sophisticated software algorithms, to analyze the complete event information, and further reduce the accepted event rate for permanent storage and analysis. This paper describes the design and implementation of the HLT Configuration Management system. First experiences with commissioning of the HLT system are also reported.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The CMS Data Acquisition System Software

The CMS data acquisition system is made of two major subsystems: event building and event filter. The presented paper describes the architecture and design of the software that processes the data flow in the currently operating experiment. The cen tral DAQ system relies on industry standard networks and processing equipment. Adopting a single software infrastructure in all subsystems of the experiment imposes, however, a number of different requirements. High efficiency and configuration flexibilit y are among the most important ones. The XDAQ software infrastructure has matured over an eight years development and testing period and has shown to be able to cope well with the requirements of the CMS experiment.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The CMS Event Builder and Storage System

The CMS event builder assembles events accepted by the first level trigger and makes them available to the high-level trigger. The event builder needs to handle a maximum input rate of 100 kHz and an aggregated throughput of 100 GB/s originating f rom approximately 500 sources. This paper presents the chosen hardware and software architecture. The system consists of 2 stages: an initial pre-assembly reducing the number of fragments by one order of magnitude and a final assembly by several independe nt readout builder (RU-builder) slices. The RU-builder is based on 3 separate services: the buffering of event fragments during the assembly, the event assembly, and the data flow manager. A further component is responsible for handling events accepted by the high-level trigger: the storage manager (SM) temporarily stores the events on disk at a peak rate of 2 GB/s until they are permanently archived offline. In addition, events and data-quality histograms are served by the SM to online monitoring clients . We discuss the operational experience from the first months of reading out cosmic ray data with the complete CMS detector.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Performance portability for the CMS Reconstruction with Alpaka

For CMS, Heterogeneous Computing is a powerful tool to face the computational challenges posed by the upgrades of the LHC, and will be used in production at the High Level Trigger during Run 3. In principle, to offload the computational work on non-CPU resources, while retaining their performance, different implementations of the same code are required. This would introduce code-duplication which is not sustainable in terms of maintainability and testability of the software. Performance portability libraries allow to write code once and run it on different architectures with close-to-native performance. The CMS experiment is evaluating performance portability libraries for the near term future.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Validation and tuning of the CMS full simulation

The CMS simulation, based on the Geant4 toolkit, has been operational within the new CMS software framework for more than four years. The description of the detector, including the forward regions, has been completed. A detailed investigation of detector positioning and material budget is underway using collision data. Detailed modelling of detector noise has been performed and validated with the collision data.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Design and early experience with promoting user-created data in CMS

The Computing Model of the CMS experiment [1] does not address transfering user-created data between different Grid sites. Due to the limited resources of a single site, distribution of individual user-created datasets between sites is crucial to ensure accessibility. In contrast to official datasets, there are no special requirements for user datasets (e.g. concerning data quality). The StoreResults service provides a mechanism to elevate user-created datasets to central bookkeeping ensuring the data quality is the same as an official dataset. This is a prerequisite for further distribution within the CMS dataset infrastructure.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Planning and organization of an e-learning training program on the analysis software in CMS

Analyzing physics data at LHC experiments is a complicated task involving multiple steps, sharing of expertise, cross checks and comparing different analyses. To maximize physics productivity, the CMS experiment at LHC has developed a collection of analysis tools called the PAT (Physics Analysis Toolkit). A comprehensive training program was designed and setup on using PAT software as an integral key part of the analysis of data from the CMS experiment. This note summarizes the requirements and the considerations that led to establish the PAT training program, the approach taken, the main organizational issues and the experience on its implementation and maintenance. The training and the feedback has proved to be very successful both for participants and the PAT development team.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Status of the CMS Detector Control System

The Compact Muon Solenoid (CMS) is a CERN multi-purpose experiment that exploits the physics of the Large Hadron Collider (LHC). The Detector Control System (DCS) is responsible for ensuring the safe, correct and efficient operation of the experiment, and has contributed to the recording of high quality physics data. The DCS is programmed to automatically react to the LHC operational mode. CMS sub-detectors bias voltages are set depending on the machine mode and particle beam conditions. An operator provided with a small set of screens supervises the system status summarized from the approximately 6M monitored parameters. Using the experience of nearly two years of operation with beam the DCS automation software has been enhanced to increase the system efficiency by minimizing the time required by sub-detectors to prepare for physics data taking. From the infrastructure point of view the DCS will be subject to extensive modifications in 2012. The current rack mounted control PCs will be replaced by a redundant pair of DELL Blade systems. These blade servers are a high-density modular solution that incorporates servers and networking into a single chassis that provides shared power, cooling and management. This infrastructure modification associated with the migration to blade servers will challenge the DCS software and hardware factorization capabilities. The on-going studies for this migration together with the latest modifications are discussed in the paper.

Bauer, Gerry↗

High availability through full redundancy of the CMS detector controls system

The CMS detector control system (DCS) is responsible for controlling and monitoring the detector status and for the operation of all CMS sub detectors and infrastructure. This is required to ensure safe and efficient data taking so that high quality physics data can be recorded. The current system architecture is composed of more than 100 servers in order to provide the required processing resources. An optimization of the system software and hardware architecture is under development to ensure redundancy of all the controlled subsystems and to reduce any downtime due to hardware or software failures. The new optimized structure is based mainly on powerful and highly reliable blade servers and makes use of a fully redundant approach, guaranteeing high availability and reliability. The analysis of the requirements, the challenges, the improvements and the optimized system architecture as well as its specific hardware and software solutions are presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Multiple-view, multiple-selection visualization of simulation geometry in CMS

Fireworks, the event-display program of CMS, was extended with an advanced geometry visualization package. ROOT's TGeo geometry is used as internal representation, shared among several geometry views. Each view is represented by a GUI list-tree widget, implemented as a flat vector to allow for fast searching, selection, and filtering by material type, node name, and shape type. Display of logical and physical volumes is supported. Color, transparency, and visibility flags can be modified for each node or for a selection of nodes. Further operations, like opening of a new view or changing of the root node, can be performed via a context menu. Node selection and graphical properties determined by the list-tree view can be visualized in any 3D graphics view of Fireworks. As each 3D view can display any number of geometry views, a user is free to combine different geometry-view selections within the same 3D view. Node-selection by proximity to a given point is possible. A visual clipping box can be set for each geometry view to limit geometry drawing into a specified region. Visualization of geometric overlaps, as detected by TGeo, is also supported. The geometry visualization package is used for detailed inspection and display of simulation geometry with or without the event data. It also serves as a tool for geometry debugging and inspection, facilitating development of geometries for CMS detector upgrades and for SLHC.

Bauerdick, L. A.T.↗

CRAB3: Establishing a new generation of services for distributed analysis at CMS

In CMS Computing the highest priorities for analysis tools are the improvement of the end users ability to produce and publish reliable samples and analysis results as well as a transition to a sustainable development and operations model. To achieve these goals CMS decided to incorporate analysis processing into the same framework as data and simulation processing. This strategy foresees that all workload tools (TierO, Tier1, production, analysis) share a common core with long term maintainability as well as the standardization of the operator interfaces. The re-engineered analysis workload manager, called CRAB3, makes use of newer technologies, such as RESTFul based web services and NoSQL Databases, aiming to increase the scalability and reliability of the system. As opposed to CRAB2, in CRAB3 all work is centrally injected and managed in a global queue. A pool of agents, which can be geographically distributed, consumes work from the central services serving the user tasks. The new architecture of CRAB substantially changes the deployment model and operations activities. In this paper we present the implementation of CRAB3, emphasizing how the new architecture improves the workflow automation and simplifies maintainability. In particular, we will highlight the impact of the new design on daily operations.

Cinquilli, M.↗