Search NASA⌕ Search

SEARCH · Search NASA

Results for “COMPRESSED GASES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

A second-order accurate kinetic-theory-based method for inviscid compressible flows

An upwind method for the numerical solution of the Euler equations is presented. This method, called the kinetic numerical method (KNM), is based on the fact that the Euler equations are moments of the Boltzmann equation of the kinetic theory of gases when the distribution function is Maxwellian. The KNM consists of two phases, the convection phase and the collision phase. The method is unconditionally stable and explicit. It is highly vectorizable and can be easily made total variation diminishing for the distribution function by a suitable choice of the interpolation strategy. The method is applied to a one-dimensional shock-propagation problem and to a two-dimensional shock-reflection problem.

Deshpande, Suresh M.↗

Strong-coupling perturbation theory for the extended Bose-Hubbard model

We develop a strong-coupling perturbation theory for the extended Bose-Hubbard model with on-site and nearest-neighbor boson-boson repulsions on (d>1)-dimensional hypercubic lattices. Analytical expressions for the ground-state phase boundaries between the incompressible (Mott or charge-density-wave insulators) and the compressible (superfluid or supersolid) phases are derived up to third order in the hopping t. We also briefly discuss possible implications of our results in the context of ultracold dipolar Bose gases with dipole-dipole interactions loaded into optical lattices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Well-to-Wheels Analysis of Compressed Natural Gas and Ethanol from Municipal Solid Waste

The amount of municipal solid waste (MSW) generated in the United States was estimated at 254 million wet tons in 2013, and around half of that generated waste was landfilled. There is a huge potential in recovering energy from that waste, since around 60% of landfilled material is biomass-derived waste that has high energy content. In addition, diverting waste for fuel production avoids huge fugitive emissions from landfills, especially uncontrolled CH 4 emissions, which are the third largest anthropogenic CH 4 source in the United States. Lifecycle analysis (LCA) is typically used to evaluate the environmental impact of alternative fuel production pathways. LCA of transportation fuels is called well-to-wheels (WTW) and covers all stages of the fuel production pathways, from feedstock recovery (well) to vehicle operation (wheels). In this study, the Greenhouse Gases, Regulated Emissions, and Energy Use in Transportation (GREET ® ) model developed by Argonne National Laboratory is used to evaluate WTW greenhouse gas (GHG) emissions and fossil fuel consumption of waste-derived fuels. Two waste-to-energy (WTE) pathways have been evaluated – one for compressed natural gas (CNG) production using food waste via anaerobic digestion, and the other for ethanol production from yard trimmings via fermentation processes. Because the fuel production pathways displace current waste management practices (i.e., landfilling waste), we use a marginal approach that considers only the differences in emissions between the counterfactual case and the alternative fuel production case.

03 NATURAL GAS↗

Fallon FORGE: Lithology Logs and Well 21-31 Drilling Data

This submission includes lithology logs for all Fallon FORGE area wells; determined from core, cuttings, and thin section. Wells included are 84-31, 21-31, 82-36, FOH-3D, 62-36, 18-5, 88-24, 86-25, FOH-2, 14-36, 17-16, 34-33, 35A-11, 51A-20, 62-15, 72-7, 86-15, Carson_Strat_1_36-32, and several others. Lithology logs last updated 3/13/2018 with confirmation well 21-31 data, and revisited existing wells. Also included is well logging data for Fallon FORGE 21-31. Well logging data includes daily reports, well logs (drill rate, lithology, fractures, mud losses, minerals, temperature, gases, and descriptions), mud reports, drilling parameter plots, daily mud loss summaries, survey reports, progress reports, plan view maps (easting, northing), and wireline logs (caliper [with GR], triple combo [GR, caliper, SP, resistivity, array induction, density, photoelectric factor, and neutron porosity], array induction with linear correlation [GR, SP, Array Induction, caliper, conductivity], and monopole compression dipole shear [GR, SP, Caliper, sonic porosity, delta-T compressional, and delta-T shear])

15 GEOTHERMAL ENERGY↗

Strong hydrogen trapping at helium in tungsten: Density functional theory calculations

Using first-principles density functional theory calculations, we have investigated the interaction of H and He in W, a potential plasma-facing material in fusion reactors. Strong attraction is found between He and H due to a decreased electron density around He. In the vicinity of a substitutional He atom, the H choose to stay in the tetrahedral-, rather than octahedral-interstitial sites. The maximum number of H atoms that one substitutional He can trap is 12, despite a much smaller local open volume than a vacancy offers. The trapping energy to He for the first H is as large as -0.96 eV. Such a strong attraction well explains the observed enhanced retention of H and He near the surface of W under both sequential and simultaneous bombardments. At ideal He/H ratio, He might suppress to a considerable extent the H blistering at the W surface. In a semiquantitative analysis, we decompose the strong He-H interaction into three parts, namely, an attractive force induced by valence electron depletion around He, repulsive forces contributed by elastic compression of the He-H separation and a H-H repelling in high-density electron gas.

36 MATERIALS SCIENCE↗

Tkachenko modes in rotating neutron stars: The effect of compressibility and implications for pulsar timing noise

Long wavelength oscillations (Tkachenko waves) of the triangular lattice of quantized vortices in superfluid neutron stars have been suggested as one of the possible explanations for the timing noise observed in many radio pulsars, in particular, for the 100-1000 day variations in the spin of PSR 1828-11. Most studies to date have, however, been based on the hydrodynamics developed for superfluid Helium. In this paper we extend the formulation to a two-fluid neutron and proton system, relevant for neutron star interiors and include the effect of chemical coupling, compressibility and mutual friction between the components. In particular we find that chemical coupling and compressibility can have a drastic effect on the mode structure. However, for the slower pulsars rotating at 1-10 Hz (such as PSR B1828-11), most choices of parameters in the equation of state lead to Tkachenko oscillations with frequencies in the correct range to explain the timing noise. We also investigate the case of more rapidly rotating pulsars (above 100 Hz) for which we find that there is a vast portion of parameter space in which there are no Tkachenko modes, but only modified sound waves at much higher frequencies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

What are Hydrofluorocarbons?

Hydrofluorocarbons are the most common refrigerants found in vapor compression systems that heat and cool our homes. They are also thousands of times more potent than carbon dioxide. Learn about the Energy Department's efforts to help phase down these fluorinated gases.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Volumetrics of CO{sub 2} Storage in Deep Saline Formations

Concern about the role of greenhouse gases in global climate change has generated interest in sequestering CO{sub 2} from fossil-fuel combustion in deep saline formations. Pore space in these formations is initially filled with brine, and space to accommodate injected CO{sub 2} must be generated by displacing brine, and to a lesser extent by compression of brine and rock. The formation volume required to store a given mass of CO{sub 2} depends on the storage mechanism. We compare the equilibrium volumetric requirements of three end-member processes: CO{sub 2} stored as a supercritical fluid (structural or stratigraphic trapping); CO{sub 2} dissolved in pre-existing brine (solubility trapping); and CO{sub 2} solubility enhanced by dissolution of calcite. For typical storage conditions, storing CO{sub 2} by solubility trapping reduces the volume required to store the same amount of CO{sub 2} by structural or stratigraphic trapping by about 50%. Accessibility of CO{sub 2} to brine determines which storage mechanism (structural/stratigraphic versus solubility) dominates at a given time, which is a critical factor in evaluating CO{sub 2} volumetric requirements and long-term storage security.

54 ENVIRONMENTAL SCIENCES↗

Experimental and theoretical investigation of a multicolor filament

Generation of ultrashort ultraviolet (uv) pulses by using nonlinear frequency conversion through filamentation was experimentally and theoretically investigated. By gently focusing second harmonic and fundamental Ti:sapphire laser pulses into gases, ultrashort uv pulses were efficiently generated by four-wave mixing processes through filamentation. The pressure dependence of the conversion efficiency cannot be explained by a one-dimensional model, but calculation of multicolor filament by a three-dimensional model was successful. The simulation result indicates a broad scalability of the scheme for frequency conversion of ultrashort pulses. The generated two-color uv pulses (200 and 260 nm) were successfully compressed down to approx15 fs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Space shuttle elevon seal panel mechanism

The orbiter elevon seal panel mechanism controls the position of fairing panels between the orbiter wing and elevon. Early mechanism designs used linkages which approximately matched the panel motion to elevon position, depending on panel deflections to maintain sealing. These linkages were refined during orbiter development to match panel motion to elevon motion more exactly, thus reducing panel deflections, loads, and weight. Changes to the adjacent cove seal resulted in the use of curved tension compression links. Mechanism temperatures up to 750 F (locally) posed difficulties in bearing lubrication. Despite the adverse effect of the many fabrication tolerances, the system successfully prevented the entry of 1200 F hot gases into the wing/elevon joint.

Ripley, J. G.↗

Two-equation turbulence model for compressible reacting flows

A two-equation k-epsilon turbulence model is presently modified for applicability to compressible flows by adapting a compressibility correction model. Compressible mixing layer computations show that the reduced growth rate of the mixing layer with increasing convective Mach number is accurately predicted by these means. Preliminary studies of reacting mixing problems involving dissimilar gases show the model's suitability for application to such flows.

Narayan, J. R.↗

Ppb-level mid-infrared ethane detection based on three measurement schemes using a 3.34-μm continuous-wave interband cascade laser

A ppb-level mid-infrared ethane (C 2 H 6 ) sensor was developed using a continuous-wave, thermoelectrically cooled, distributed feedback interband cascade laser emitting at 3.34 μm and a miniature dense patterned multipass gas cell with a 54.6-m optical path length. The performance of the sensor was investigated using two different techniques based on the tunable interband cascade laser: direct absorption spectroscopy (DAS) and second-harmonic wavelength modulation spectroscopy (2f-WMS). Three measurement schemes, DAS, WMS and quasi-simultaneous DAS and WMS, were realized based on the same optical sensor core. A detection limit of ~7.92 ppbv with a precision of ±30 ppbv for the separate DAS scheme with an averaging time of 1 s and a detection limit of ~1.19 ppbv with a precision of about ±4 ppbv for the separate WMS scheme with a 4-s averaging time were achieved. An Allan–Werle variance analysis indicated that the precisions can be further improved to 777 pptv @ 166 s for the separate DAS scheme and 269 pptv @ 108 s for the WMS scheme, respectively. For the quasi-simultaneous DAS and WMS scheme, both the 2f signal and the direct absorption signal were simultaneously extracted using a LabVIEW platform, and four C 2 H 6 samples (0, 30, 60 and 90 ppbv with nitrogen as the balance gas) were used as the target gases to assess the sensor performance. A detailed comparison of the three measurement schemes is reported. Here, atmospheric C 2 H 6 measurements on the Rice University campus and a field test at a compressed natural gas station in Houston, TX, were conducted to evaluate the performance of the sensor system as a robust and reliable field-deployable sensor system.

47 OTHER INSTRUMENTATION↗

Cyclobutanedicarboxylate Metal–Organic Frameworks as a Platform for Dramatic Amplification of Pore Partition Effect

Ultrafine tuning of MOF structures at sub-angstrom or picometer levels can help improve separation selectivity for gases with subtle differences. However, for MOFs with large-enough pore size, the effect from ultrafine tuning on sorption can be muted. Here we show an integrative strategy that couples together extreme pore compression with ultrafine pore tuning. Furthermore, this strategy is made possible by unique combination of two features of the pacs platform (pacs = partitioned acs): multi-modular framework and exceptional tolerance towards isoreticular replacement. Specifically, we use one module (Ligand 1, L1) to shrink pore size to an extreme minimum on pacs. A compression ratio of about 30% was achieved (based on unit-cell c/a ratio) from prototypical 1,4-benzenedicarboxylate-pacs to trans-1,3-cyclobutanedicarboxylate-pacs. This is followed by using another module (Ligand 2, L2) for ultrafine pore tuning (< 3% compression). This L1-L2 strategy increases C 2 H 2 /CO 2 selectivity from 2.6 to 20.8 and gives rise to excellent experi-mental breakthrough performance. Being the shortest cyclic dicarboxylate that mimics para-benzene-based moieties us-ing bioisosteric (BIS) strategy on pacs, trans-1,3-cyclobutanedicarboxylate-based MOF chemistry offers new opportuni-ties in MOF chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Braided Carbon Fiber Rope Flow Characteristics

I am submitting the following technical subject for consideration as a thesis topic for the master degree: The reusable solid rocket motor (RSRM) nozzle internal joints are being evaluated for the incorporation of a carbon fiber rope (CFR) as a thermal barrier. The CFR is approximately 0.260 in. diameter and is composed of approximately 12,000 carbon fibers, woven in ten sheaths or layers. The CFR is manufactured by a sub-tier vendor and subsequently several of its manufacturing details are proprietary to that vendor. The CFR design intent is to prevent hot motor combustion products and slag from intruding into the joint scaling area while still approaching a vented joint design to avoid the detriments of gas jet impingement. As a member of the Heat Transfer section at Thiokol Propulsion, two main goals exist as part of this NASA funded design effort: (1) development of flow model through the CFR and (2) development of a heat transfer model through the CFR. While both models are needed and most probably interrelated, the gas flow model is being targeted as the subject matter. Essentially, the topic would be "Modeling of Gas Flow through a Braided Carbon Fiber Rope". An AIAA journal or conference paper is being considered through Thiokol/NASA as well. A sub-scale CFR flow test fixture was designed to simulate the relative levels of CFR compression. The test fixture provides the means to measure gas mass flow rate upstream of the CFR and the pressure and temperature both upstream and downstream of the CFR. The test fixture was designed to eliminate the possibility of dynamic gapping at the CFR location and provide minimal flow resistance to ambient for gases exiting the rope. The data collected in the experiment will be evaluated to define a permeability/flow resistance model. Two possibilities exist for the flow characteristics through the CFR from choked flow to strictly friction driven. A test matrix for evaluating the CFR has been compiled, which addresses both of these characteristics. The range of pressures to be tested covers a relatively low delta pressure where non-choked flow is impossible, while the high pressure shown is dictated by the RSRM joint operating pressure where choking is possible. The test matrix, was also designed for a range of rope compressions or test fixture gaps ranging from 0.025" to 0.070". These gaps are controlled by the range of RSRM full-scale hardware joint gaps that will be expected by virtue of the joint design.

Heman, J. R. C.↗

An experimental parametric study of geometric, Reynolds number, and ratio of specific heats effects in three-dimensional sidewall compression scramjet inlets at Mach 6

The effects of the decrease in the ratio of specific heats have been investigated in generic 3D sidewall compression scramjet inlets with leading-edge sweep angles of 30 and 70 degrees. The effects of a decrease in ratio of specific heats were seen by comparing data from two facilities in two test gases: in the Langley Mach 6 CF4 Tunnel in tetrafluoromethane and in the Langley 15-Inch Mach 6 Air Tunnel in perfect gas air. In addition to the simulated real gas effects, the parametric effects of cowl position, contraction ratio, leading-edge sweep, and Reynolds number were investigated in the 15-Inch Mach 6 Air Tunnel. The models were instrumented with a total of 45 static pressure orifices distributed on the sidewalls and baseplate. Surface streamline patterns were examined via oil flow, and schlieren videos were made of the external flow field. The results of these tests have significant implications to ground based testing of inlets in facilities which do not operate at flight enthalpies.

Holland, Scott D.↗

An Experimental Parametric Study of Geometric, Reynolds Number, and Ratio of Specific Heats Effects in Three-Dimensional Sidewall Compression Scramjet Inlets at Mach 6

Since mission profiles for airbreathing hypersonic vehicles such as the National Aero-Space Plane include single-stage-to-orbit requirements, real gas effects may become important with respect to engine performance. The effects of the decrease in the ratio of specific heats have been investigated in generic three-dimensional sidewall compression scramjet inlets with leading-edge sweep angles of 30 and 70 degrees. The effects of a decrease in ratio of specific heats were seen by comparing data from two facilities in two test gases: in the Langley Mach 6 CF4 Tunnel in tetrafluoromethane (where gamma=1.22) and in the Langley 15-Inch Mach 6 Air Tunnel in perfect gas air (where gamma=1.4). In addition to the simulated real gas effects, the parametric effects of cowl position, contraction ratio, leading-edge sweep, and Reynolds number were investigated in the 15-Inch Mach 6 Air Tunnel. The models were instrumented with a total of 45 static pressure orifices distributed on the sidewalls and baseplate. Surface streamline patterns were examined via oil flow, and schlieren videos were made of the external flow field. The results of these tests have significant implications to ground based testing of inlets in facilities which do not operate at flight enthalpies.

Holland, Scott D.↗

Strain effects on the electronic properties in δ -doped oxide superlattices

We investigated strain effects on the electronic properties of (LaTiO 3 ) 1 /(SrTiO 3 )N superlattices using density functional theory. Under biaxial in-plane strain within the range of -5% ≤ ε// ≤ 5%, the d xy orbital electrons are highly localized at the interfaces whereas the d yz and d xz orbital electrons are more distributed in the SrTiO 3 (STO) spacer layers. For STO thickness N ≥ 3 unit cells (u.c.), the d xy orbital electrons form two-dimensional (2D) electron gases (2DEGs). The quantized energy levels of the 2DEG are insensitive to the STO spacer thickness, but are strongly dependent on the applied biaxial in-plane strain. As the in-plane strain changes from compressive to tensile, the quantized energy levels of the dxy orbitals decrease thereby creating more states with 2D character. In contrast to the d xy orbital, the d yz and dxz orbitals always have three-dimensional (3D) transport characteristics and their energy levels increase as the strain changes from compressive to tensile. In conclusion, since the charge densities in the d xy orbital and the d yz and d xz orbitals respond to biaxial in-plane strain in an opposite way, the transport dimensionality of the majority carriers can be controlled between 2D and 3D by applying biaxial in-plane strain.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Simulating interactions of detonation, ionization chemistry, and magnetohydrodynamics

Detonation engines have the potential to remove NOx emissions from combustion based power generation by using high-temperature oxyfuel combustion. A magnetohydrodynamic (MHD) generator can directly extract power from ionized gases behind the detonation front (via the Lorentz force). This eliminates fragile moving components found in gas turbine engines unable to withstand high temperatures. Modeling detonations coupled with MHD requires the simultaneous consideration of interactions between compressible flow, chemical reactions, and an electro-magnetic field. This is achieved by coupling a Riemann solver, implicit ordinary differential equation integrators, and a Galerkin finite-element solver, which respectively solve the Euler, stiff chemical kinetics, and decoupled Maxwell equations. Each solver is separately verified and validated, and the coupled system is validated with literature results. Simulations of hydrogen and methane oxyfuel combustion are performed over a range of parameters to determine potential power extraction and emissions. In addition, seed particles are typically necessary to increase a fluid’s electrical conductivity through ionization. Therefore, impact of seed composition and quantity is also assessed. These results provide insight into the complex parasitic interactions between detonation, ionization, and MHD effects.

Zaiger, Matthew↗