Search NASA⌕ Search

SEARCH · Search NASA

Results for “Cartesian”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Amplified charge and discharge rates in phase change materials for energy storage using spatially-enhanced thermal conductivity

Composites made with high thermal conductivity meshes embedded in phase change materials (PCMs) increase charge/discharge rates of latent heat energy storage systems. Here we study the benefits of spatially-dependent enhancements to thermal conductivity on the charge/discharge rates of PCMs in both one-dimensional Cartesian and one-dimensional cylindrical coordinates. Our nondimensionalized quasi-steady (Stefan number ≲ 0.1) solution indicates that the average charge (discharge) rate in a spatially-enhanced PCM outperforms the uniformly-enhanced case by maximizing the enhancement near the heat source and therein reducing the time averaged thermal resistance to melting (solidifying). Relative to a uniformly-enhanced thermal conductivity, the optimal charge/discharge rate enhancement is a modest 12% in one-dimensional Cartesian coordinates but as high as 140% in one-dimensional cylindrical coordinates. Our analytical solutions are a design guide for graded mesh structures that can be realized by advanced fabrication techniques such as additive manufacturing and applied in applications ranging from telecommunications to buildings, where PCMs are employed to harness rapidly varying energy sources.

25 ENERGY STORAGE↗

Numerical homogenization of concrete microstructures without explicit meshes

Life management of electric hydro or nuclear power plants requires to estimate long-term concrete properties on facilities, for obvious safety and serviceability reasons. Decades-old structures are foreseen to be operational for several more decades. As a large number of different concrete formulations are found in EDF facilities, empirical models based on many experiments cannot be an option for a large fleet of power plant buildings. To build predictive models, homogenization techniques offer an appealing alternative. To properly upscale creep, especially at long term, a rather precise description of the microstructure is required. However, the complexity of the morphology of concrete poses several challenges. In particular, concrete is formulated to maximize the packing density of the granular skeleton, leading to aggregates spanning several length scales with small inter particle spacings. Thus, explicit meshing of realistic concrete microstructures is either out of reach of current meshing algorithms or would produce a number of degrees of freedom far higher than the current generic FEM codes capabilities. This paper proposes a method to deal with complex matrix-inclusions microstructures such as the ones encountered at the mortar or concrete scales, without explicitly meshing them. The microstructure is superimposed to an independent mesh, which is a regular Cartesian grid. This inevitably yields so called 'gray elements', spanning across multiple phases. As the reliability of the estimate of the effective properties highly depends on the behavior affected to these gray elements, special attention is paid to them. As far as the question of the solvers is concerned, generic FEM codes are found to lack efficiency: they cannot reach high enough levels of discretization with classical free meshes, and they do not take advantage of the regular structure of the mesh. Thus, a specific finite differences/finite volumes solver has been developed. At first, generic off-the-shelf linear system solvers were used. To further improve the efficiency in terms of memory requirements, specific variants of the preconditioned conjugate gradient were implemented. This allowed to homogenize the conductivity of a concrete-like microstructure using more than 10{sup 9} degrees of freedom on a rather common hardware for 2010 (a PC embedding 48 GB of RAM). Taking benefit of the properties of the regular Cartesian grid we have also investigated a multi-level method to improve the CPU efficiency of the code.

36 MATERIALS SCIENCE↗

Computational and numerical analysis of AC optimal power flow formulations on large-scale power grids

We report that alternating current optimal power flow (AC-OPF) is a fundamental tool in electric utilities to determine optimal operation of the various resources. Typically, the AC-OPF problem uses power balance formulation containing voltages and power equations. Yet, there is no comprehensive comparison of the different AC-OPF formulations, especially for large-scale networks. This paper presents a detailed comparative evaluation of different formulations of the AC-OPF problem on networks ranging from 9-bus to 25,000 buses. Three different formulations: 1) power balance with polar voltages, 2) power balance with Cartesian voltages, and 3) current balance with Cartesian voltages are discussed in detail by comparing their characteristics, and numerical and computational performance.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Critique on “A Revisit of Navier-Stokes Equation”

In a recently published work (Sheng, 2020), Sheng identified inconsistencies in the concepts and principles leading to the Navier–Stokes equations and proposed a new asymmetric “friction tensor” to resolve these inconsistencies. We show that this friction tensor can be interpreted as the non-isotropic part of a vorticity-influenced viscous stress tensor following the analysis in Berdahl and Strang (1986). The asymmetric stress tensor however violates the principles of mechanical equilibrium in fluid flows that are free of external or body couples and is therefore non-physical in classical continuum hydrodynamics. We refute the arguments in favour of the asymmetric stress tensor in Sheng (2020) whilst also demonstrating that the friction tensor leads to the incorrect form of the Navier–Stokes equations in non-Cartesian co-ordinates and its ability to recover the correct governing equations in Cartesian co-ordinates is fortuitous.

asymmetric↗

Comparison of Repositioning Accuracy of Two Commercially Available Immobilization Systems for Treatment of Head-and-Neck Tumors Using Simulation Computed Tomography Imaging

Purpose: To compare the setup accuracy, comfort level, and setup time of two immobilization systems used in head-and-neck radiotherapy. Methods and Materials: Between February 2004 and January 2005, 21 patients undergoing radiotherapy for head-and-neck tumors were assigned to one of two immobilization devices: a standard thermoplastic head-and-shoulder mask fixed to a carbon fiber base (Type S) or a thermoplastic head mask fixed to the Accufix cantilever board equipped with the shoulder depression system. All patients underwent planning computed tomography (CT) followed by repeated control CT under simulation conditions during the course of therapy. The CT images were subsequently co-registered and setup accuracy was examined by recording displacement in the three cartesian planes at six anatomic landmarks and calculating the three-dimensional vector errors. In addition, the setup time and comfort of the two systems were compared. Results: A total of 64 CT data sets were analyzed. No difference was found in the cartesian total displacement errors or total vector displacement errors between the two populations at any landmark considered. A trend was noted toward a smaller mean systemic error for the upper landmarks favoring the Accufix system. No difference was noted in the setup time or comfort level between the two systems. Conclusion: No significant difference in the three-dimensional setup accuracy was identified between the two immobilization systems compared. The data from this study reassure us that our technique provides accurate patient immobilization, allowing us to limit our planning target volume to <4 mm when treating head-and-neck tumors.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

A moving control volume approach to computing hydrodynamic forces and torques on immersed bodies

Here, we present a moving control volume (CV) approach to computing hydrodynamic forces and torques on complex geometries. The method requires surface and volumetric integrals over a simple and regular Cartesian box that moves with an arbitrary velocity to enclose the body at all times. The moving box is aligned with Cartesian grid faces, which makes the integral evaluation straightforward in an immersed boundary (IB) framework. Discontinuous and noisy derivatives of velocity and pressure at the fluid–structure interface are avoided and far-field (smooth) velo city and pressure information is used. We re-visit the approach to compute hydrodynamic forces and torques through force/torque balance equations in a Lagrangian frame that some of us took in a prior work (Bhalla et al., 2013 [13]). We prove the equivalence of the two approaches for IB methods, thanks to the use of Peskin's delta functions. Both approaches are able to suppress spurious force oscillations and are in excellent agreement, as expected theoretically. Test cases ranging from Stokes to high Reynolds number regimes are considered. We discuss regridding issues for the moving CV method in an adaptive mesh refinement (AMR) context. The proposed moving CV method is not limited to a specific IB method and can also be used, for example, with embedded boundary methods.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Lagrangian discontinuous Galerkin hydrodynamic methods in axisymmetric coordinates

In this paper, we present new Lagrangian discontinuous Galerkin (DG) hydrodynamic methods for compressible flows on unstructured meshes in axisymmetric coordinates. The physical evolution equations for the specific volume, velocity, and specific total energy are discretized using a modal DG method with linear Taylor series polynomials. Two different approaches are used to discretize the evolution equations – the first one is the true volume approach and the second one is the area-weighted approach. For the true volume approach, the DG equations are derived using the true 3D volume that is consistent with the geometry conservation law (GCL). The Riemann velocity at the nodes on the surface of the element, and the corresponding surface forces, are calculated by solving a multidirectional approximate Riemann problem using surfaces areas for axisymmetric coordinates. This true volume approach conserves mass, momentum, and total energy and satisfies the GCL. However, it can not preserve spherical symmetry on an equal-angle polar grid with 1D radial flows. For the area-weighted approach, the DG equations are based on the 2D Cartesian geometry that is rotated about the axis of symmetry using a single, element average radius. With this approach, the Riemann velocity at the nodes on the surface of the element, and the corresponding surface forces, are calculated by solving a multidirectional approximate Riemann problem in 2D Cartesian geometry. This area-weighted approach, in the limit of an infinitesimal mesh size, conserves physical momentum, and physical total energy. The area-weighted approach preserves spherical symmetry on an equal-angle polar grid for 1D radial flows, but it does not satisfy the GCL. Finally, a suite of test problems are calculated to demonstrate stable mesh motion, the expected second order accuracy of these methods, and that the new area-weighted DG method preserves spherical symmetry on 1D radial flow problems with equal-angle polar meshes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A constrained-transport embedded boundary method for compressible resistive magnetohydrodynamics

Motivated by the increased interest in pulsed-power magneto-inertial fusion devices in recent years, we present a method for implementing an arbitrarily shaped embedded boundary on a Cartesian mesh while solving the equations of compressible resistive magnetohydrodynamics. The method is built around a finite volume formulation of the equations in which a Riemann solver is used to compute fluxes on the faces between grid cells, and a face-centered constrained transport formulation of the induction equation. The small time step problem associated with the cut cells is avoided by always computing fluxes on the faces and edges of the Cartesian mesh. We extend the method to model a moving interface between two materials with different properties using a ghost-fluid approach, and show some preliminary results including shock-wave-driven and magnetically-driven dynamical compressions of magnetohydrostatic equilibria. In conclusion, we present a thorough verification of the method and show that it converges at second order in the absence of discontinuities, and at first order with a discontinuity in material properties.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Efficient Procedure for the Numerical Calculation of Harmonic Vibrational Frequencies Based on Internal Coordinates

We propose a general procedure for the numerical calculation of the harmonic vibrational frequencies that is based on internal coordinates and Wilson’s GF methodology via double differentiation of the energy. The internal coordinates are defined as the geometrical parameters of a Z-matrix structure, thus avoiding issues related to their redundancy. Linear arrangements of atoms are described using a dummy atom of infinite mass. The procedure has been automated in FORTRAN90 and its main advantage lies in the nontrivial reduction of the number of single-point energy calculations needed for the construction of the Hessian matrix when compared to the corresponding number using double differentiation in Cartesian coordinates. For molecules of C 1 symmetry the computational savings in the energy calculations amount to 36N – 30, where N is the number of atoms, with additional savings when symmetry is present. Typical applications for small and medium size molecules in their minimum and transition state geometries as well as hydrogen bonded clusters (water dimer and trimer) are presented. Finally, in all cases the frequencies based on internal coordinates differ on average by <1 cm –1 from those obtained from Cartesian coordinates.

Miliordos, Evangelos↗

Three-dimensional alteration of neurites in schizophrenia

Psychiatric symptoms of schizophrenia suggest alteration of cerebral neurons. However, the physical basis of the schizophrenia symptoms has not been delineated at the cellular level. Here, we report nanometer-scale three-dimensional analysis of brain tissues of schizophrenia and control cases. Structures of cerebral tissues of the anterior cingulate cortex were visualized with synchrotron radiation nanotomography. Tissue constituents visualized in the three-dimensional images were traced to build Cartesian coordinate models of tissue constituents, such as neurons and blood vessels. The obtained Cartesian coordinates were used for calculating curvature and torsion of neurites in order to analyze their geometry. Results of the geometric analyses indicated that the curvature of neurites is significantly different between schizophrenia and control cases. The mean curvature of distal neurites of the schizophrenia cases was similar to 1.5 times higher than that of the controls. The schizophrenia case with the highest neurite curvature carried a frame shift mutation in the GLO1 gene, suggesting that oxidative stress due to the GLO1 mutation caused the structural alteration of the neurites. The differences in the neurite curvature result in differences in the spatial trajectory and hence alter neuronal circuits. It has been shown that the anterior cingulate cortex analyzed in this study has emotional and cognitive functions. We suggest that the structural alteration of neurons in the schizophrenia cases should reflect psychiatric symptoms of schizophrenia.

60 APPLIED LIFE SCIENCES↗

Full dimensional Franck-Condon factors for the acetylene A{sup ~} {sup 1}A{sub u}—X{sup ~1}Σ{sub g}{sup +} transition. II. Vibrational overlap factors for levels involving excitation in ungerade modes

A full-dimensional Franck-Condon calculation has been applied to the A{sup ~} {sup 1}A{sub u}—X{sup ~1}Σ{sub g}{sup +} transition in acetylene in the harmonic normal mode basis. Details of the calculation are discussed in Part I of this series. To our knowledge, this is the first full-dimensional Franck-Condon calculation on a tetra-atomic molecule undergoing a linear-to-bent geometry change. In the current work, the vibrational intensity factors for levels involving excitation in ungerade vibrational modes are evaluated. Because the Franck-Condon integral accumulates away from the linear geometry, we have been able to treat the out-of-plane component of trans bend (ν{sub 4}{sup ′′}) in the linear X{sup ~} state in the rotational part of the problem, restoring the χ Euler angle and the a-axis Eckart conditions. A consequence of the Eckart conditions is that the out-of-plane component of ν{sub 4}{sup ′′} does not participate in the vibrational overlap integral. This affects the structure of the coordinate transformation and the symmetry of the vibrational wavefunctions used in the overlap integral, and results in propensity rules involving the bending modes of the X{sup ~} state that were not previously understood. We explain the origin of some of the unexpected propensities observed in IR-UV laser-induced fluorescence spectra, and we calculate emission intensities from bending levels of the A{sup ~} state into bending levels of the X{sup ~} state, using normal bending mode and local bending mode basis sets. Our calculations also reveal Franck-Condon propensities for the Cartesian components of the cis bend (ν{sub 5}{sup ′′}), and we predict that the best A{sup ~}-state vibrational levels for populating X{sup ~}-state levels with large amplitude bending motion localized in a single C–H bond (the acetylene↔vinylidene isomerization coordinate) involve a high degree of excitation in ν{sub 6}{sup ′} (cis-bend). Mode ν{sub 4}{sup ′} (torsion) populates levels with large amplitude counter-rotational motion of the two hydrogen atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-order continuum kinetic method for modeling plasma dynamics in phase space

Continuum methods offer a high-fidelity means of simulating plasma kinetics. While computationally intensive, these methods are advantageous because they can be cast in conservation-law form, are not susceptible to noise, and can be implemented using high-order numerical methods. Advances in continuum method capabilities for modeling kinetic phenomena in plasmas require the development of validation tools in higher dimensional phase space and an ability to handle non-cartesian geometries. To that end, a new benchmark for validating Vlasov-Poisson simulations in 3D (x,v x ,v y ) is presented. The benchmark is based on the Dory-Guest-Harris instability and is successfully used to validate a continuum finite volume algorithm. To address challenges associated with non-cartesian geometries, unique features of cylindrical phase space coordinates are described. Preliminary results of continuum kinetic simulations in 4D (r,z,v r ,v z ) phase space are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analysis and comparison of CVS-ADC approaches up to third order for the calculation of core-excited states

The extended second order algebraic-diagrammatic construction (ADC(2)-x) scheme for the polarization operator in combination with core-valence separation (CVS) approximation is well known to be a powerful quantum chemical method for the calculation of core-excited states and the description of X-ray absorption spectra. For the first time, the implementation and results of the third order approach CVS-ADC(3) are reported. Therefore, the CVS approximation has been applied to the ADC(3) working equations and the resulting terms have been implemented efficiently in the adcman program. By treating the α and β spins separately from each other, the unrestricted variant CVS-UADC(3) for the treatment of open-shell systems has been implemented as well. The performance and accuracy of the CVS-ADC(3) method are demonstrated with respect to a set of small and middle-sized organic molecules. Therefore, the results obtained at the CVS-ADC(3) level are compared with CVS-ADC(2)-x values as well as experimental data by calculating complete basis set limits. The influence of basis sets is further investigated by employing a large set of different basis sets. Besides the accuracy of core-excitation energies and oscillator strengths, the importance of cartesian basis functions and the treatment of orbital relaxation effects are analyzed in this work as well as computational timings. It turns out that at the CVS-ADC(3) level, the results are not further improved compared to CVS-ADC(2)-x and experimental data, because the fortuitous error compensation inherent in the CVS-ADC(2)-x approach is broken. While CVS-ADC(3) overestimates the core excitation energies on average by 0.61% ± 0.31%, CVS-ADC(2)-x provides an averaged underestimation of −0.22% ± 0.12%. Eventually, the best agreement with experiments can be achieved using the CVS-ADC(2)-x method in combination with a diffuse cartesian basis set at least at the triple-ζ level.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Communication: Wigner functions in action-angle variables, Bohr-Sommerfeld quantization, the Heisenberg correspondence principle, and a symmetrical quasi-classical approach to the full electronic density matrix

It is pointed out that the classical phase space distribution in action-angle (a-a) variables obtained from a Wigner function depends on how the calculation is carried out: if one computes the standard Wigner function in Cartesian variables (p, x), and then replaces p and x by their expressions in terms of a-a variables, one obtains a different result than if the Wigner function is computed directly in terms of the a-a variables. Furthermore, the latter procedure gives a result more consistent with classical and semiclassical theory—e.g., by incorporating the Bohr-Sommerfeld quantization condition (quantum states defined by integer values of the action variable) as well as the Heisenberg correspondence principle for matrix elements of an operator between such states—and has also been shown to be more accurate when applied to electronically non-adiabatic applications as implemented within the recently developed symmetrical quasi-classical (SQC) Meyer-Miller (MM) approach. Moreover, use of the Wigner function (obtained directly) in a-a variables shows how our standard SQC/MM approach can be used to obtain off-diagonal elements of the electronic density matrix by processing in a different way the same set of trajectories already used (in the SQC/MM methodology) to obtain the diagonal elements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Geodesic interpolation for reaction pathways

The development of high throughput reaction discovery methods such as the ab initio nanoreactor demands massive numbers of reaction rate calculations through the optimization of minimum energy reaction paths. These are often generated from interpolations between the reactant and product endpoint geometries. Unfortunately, straightforward interpolation in Cartesian coordinates often leads to poor approximations that lead to slow convergence. In this work, we reformulate the problem of interpolation between endpoint geometries as a search for the geodesic curve on a Riemannian manifold. We show that the perceived performance difference of interpolation methods in different coordinates is the result of an implicit metric change. Accounting for the metric explicitly allows us to obtain good results in Cartesian coordinates, bypassing the difficulties caused by redundant coordinates. Using only geometric information, we are able to generate paths from reactants to products which are remarkably close to the true minimum energy path. In conclusion, we show that these geodesic paths are excellent starting guesses for minimum energy path algorithms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The development of Gibbs's dyadic and implications for the gradient of a vector field

In this paper, we review the history of the dyadic as developed by Gibbs. This mathematical construct appeared in the second part of Gibbs's pamphlet on vector analysis (published in 1884), and it represented the first known development of a Cartesian theory of tensors. Gibbs made extensive use of the dyadic to express his theory of linear vector functions, that is, functions that acted on vectors and mapped them to new vectors. The dyadic proved to be a capable vehicle in Gibbs's hands, and his theory for dyadics (which we would now call second-order Cartesian tensors) was relatively advanced. The theory detailed notions such as the decomposition of vectors and conditions under which a tensor would have an inverse. While Gibbs's theory for linear operators expressed by dyadics was robust, it did not seem to garner the attention that the more conventional vector analysis (published in the first half of his pamphlet in 1881) did. Perhaps in part because of the general unfamiliarity with the dyadic, two distinct and conflicting definitions of the gradient of a vector field have arisen in the literature. The details of these differences in notation, possible reasons for the difference, and a potential resolution are proposed.

97 MATHEMATICS AND COMPUTING↗

TURBULENT DYNAMOS IN SPHERICAL SHELL SEGMENTS OF VARYING GEOMETRICAL EXTENT

We use three-dimensional direct numerical simulations of the helically forced magnetohydrodynamic equations in spherical shell segments in order to study the effects of changes in the geometrical shape and size of the domain on the growth and saturation of large-scale magnetic fields. We inject kinetic energy along with kinetic helicity in spherical domains via helical forcing using Chandrasekhar-Kendall functions. We take perfect conductor boundary conditions for the magnetic field to ensure that no magnetic helicity escapes the domain boundaries. We find dynamo action giving rise to magnetic fields at scales larger than the characteristic scale of the forcing. The magnetic energy exceeds the kinetic energy over dissipative timescales, similar to that seen earlier in Cartesian simulations in periodic boxes. As we increase the size of the domain in the azimuthal direction, we find that the nonlinearly saturated magnetic field organizes itself in long-lived cellular structures with aspect ratios close to unity. These structures tile the domain along the azimuthal direction, thus resulting in very small longitudinally averaged magnetic fields for large domain sizes. The scales of these structures are determined by the smallest scales of the domain, which in our simulations is usually the radial scale. We also find that increasing the meridional extent of the domains produces little qualitative change, except a marginal increase in the large-scale field. We obtain qualitatively similar results in Cartesian domains with similar aspect ratios.

30 DIRECT ENERGY CONVERSION↗

Measurement of fluid rotation, dilation, and displacement in particle image velocimetry using a Fourier–Mellin cross-correlation

Traditional particle image velocimetry (PIV) uses discrete Cartesian cross correlations (CCs) to estimate the displacements of groups of tracer particles within small subregions of sequentially captured images. However, these CCs fail in regions with large velocity gradients or high rates of rotation. In this paper, we propose a new PIV correlation method based on the Fourier–Mellin transformation (FMT) that enables direct measurement of the rotation and dilation of particle image patterns. In previously unresolvable regions of large rotation, our algorithm significantly improves the velocity estimates compared to traditional correlations by aligning the rotated and stretched particle patterns prior to performing Cartesian correlations to estimate their displacements. Furthermore, our algorithm, which we term Fourier–Mellin correlation (FMC), reliably measures particle pattern displacement between pairs of interrogation regions with up to ±180° of angular misalignment, compared to 6–8° for traditional correlations, and dilation/compression factors of 0.5–2.0, compared to 0.9–1.1 for a single iteration of traditional correlations.

42 ENGINEERING↗