Search NASA⌕ Search

SEARCH · Search NASA

Results for “Cell Design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Robust multiresonant nonlocal metasurfaces by rational design

Abstract Dielectric metasurfaces supporting optical resonances have become a promising platform for quantum and nonlinear optics. However, resonant metasurfaces remain limited in their capacity to independently control the behavior of many distinct resonances despite efforts in computational optimization and inverse design. In this work, we overcome longstanding limitations by introducing a generalized rational design paradigm based on symmetry. Specifically, we use symmetry-broken metasurfaces with periodic “quadromer” lattices comprised of four nanostructures per unit cell to enable extensive control of multiple optical resonances. The rationally designed metasurfaces are readily fabricable, and we experimentally demonstrate metasurfaces that support up to four high Q-factor resonances with deliberately chosen free-space polarizations, spectral separations, and mode profiles. Our design paradigm may unlock new applications for multiresonant metasurfaces in quantum and nonlinear optics, optical sensing, and augmented reality displays.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2026

A high power, low temperature molten sodium battery

Low temperature molten sodium batteries promise low-cost, grid-scale energy storage using earth-abundant materials. To be economically viable, they must demonstrate high current (power) at relevant discharge times. Here a low temperature (135 °C) molten sodium battery with a NaI–AlCl 3 molten salt catholyte and NaSICON separator is explored, minimizing cell ohmic resistances and avoiding precipitation reactions in the molten salt catholyte. Operating currents were increased by as much as 100× compared to the energy-dense baseline design (197 Wh kg −1 and 248 mAh cm −2 ). Cells were cycled 100 times at 50 mA cm −2 (150 mW cm −2 ), averaging 99.8% coulombic efficiency and 79.7% energy efficiency for 30% of the theoretical capacity. Charging currents up to 250 mA cm −2 (1070 mW cm −2 ) are demonstrated for 10% of the theoretical capacity. Toward extending the accessible capacity in these high current systems, the volume ratio of catholyte molten salt to a graphite felt current collector was varied, altering (1) the local current density in the graphite felt and (2) the discharge time at a fixed current density. Optimizing the catholyte : felt ratio dramatically increased capacity utilization to 60% (102 mAh cm −2 ) at 50 mA cm −2 (150 mW cm −2 ) charge and 10 mA cm −2 discharge. This catholyte : felt ratio of 1.4 significantly decreased the cell impedance, minimizing electrode blocking effects seen previously in NaI–AlCl 3 catholytes. Together, these high areal loadings and impressive power outputs demonstrate how low temperature molten sodium batteries can compete with commercialized sodium systems operating at more than twice the temperature.

NaSICON↗
DOE OSTI2024

Zero Emission Cargo Transport (ZECT) II Demonstration: South Coast Air Quality Management District (Final Report)

The South Coast Air Quality Management District (South Coast AQMD), California Air Resources Board (CARB) and Southern California Association of Governments (SCAG) — the agencies responsible for preparing the State Implementation Plan required under the federal Clean Air Act — have agreed that attainment of federal air quality standards for the region will require a transition to the broad use of zero and near-zero emission energy sources in cars, trucks and other equipment. Accordingly, the 2012 South Coast AQMD Air Quality Management Plan, the SCAG 2012 Regional Transportation Plan, and the “Vision for Clean Air: A Framework for Air Quality and Climate Control Planning” all identify the need to immediately enact a phasing in of zero and near-zero emission technologies to meet air quality goals. In 2014, South Coast AQMD was awarded grant funding under the US Department of Energy Zero Emission Cargo Transport (ZECT) II Demonstration program to develop and demonstrate zero-emission drayage trucks for goods movement operations between the Port of Los Angeles (POLA) and Port of Long Beach (POLB) near dock rail yards and warehouses: 1) development and demonstration of zero-emission fuel cell range extended electric drayage trucks and 2) development and demonstration of hybrid electric drayage trucks. The purpose of this project was to accelerate deployment of zero emission cargo transport technologies to reduce harmful diesel emissions, petroleum consumption and greenhouse gases in the surrounding communities along the goods movement corridors that are impacted by heavy diesel traffic and the associated air pollution. Between 2014 – 2024, six ZECT II zero-emission fuel cell drayage truck platforms, including fuel cell range extended and CNG hybrid trucks, were successfully designed, developed, integrated, built, tested, and demonstrated with drayage fleet operators in transportation corridors within areas of the South Coast AQMD jurisdiction in Southern California such as in and around POLA and POLB. Portable hydrogen refueling was deployed to support the fuel cell vehicles. The project had real-time improvement with on-going debugging and optimizations while the vehicles were under demonstration. All platforms demonstrated sufficient or excess power, torque, and energy to support 82,000lbs Gross Vehicle Weight Rating and gradeability to perform their daily duty cycles. Collectively, the trucks drove over 23,000 miles during their respective demonstration phases. The ZECT II project was the first of its kind to demonstrate the commercial viability that supported the additional technology breakthroughs for Class 8 zero emission trucks and validations as well as the regulatory basis for all the zero-emission regulation that we know today, such as the Innovative Clean Transit regulation, Advanced Clean Trucks and Clean Fleet regulations.

08 HYDROGEN↗
DOE OSTI2024

Optimization of Triply Periodic Minimal Surface Heat Exchanger to Achieve Compactness, High Efficiency, and Low-Pressure Drop

With advancements in additive manufacturing (AM) techniques, high-quality triply periodic minimal surface (TPMS) structures can now be produced. TPMS walled heat exchangers (HX) hold significant potential for industrial applications and are receiving increasing attention. This paper explores the impact of various TPMS design variables on flow and thermal performance to optimize TPMS heat exchangers for compactness, high efficiency, and low pressure drop. The design variables examined include the type of TPMS lattice, unit cell size, wall thickness, aspect ratio, TPMS orientation, and equivalent thickness. The study reveals that the flow and heat transfer performance of TPMS structures are significantly affected by these design variables. For the Gyroid, Diamond, and SplitP lattices, performance is nearly identical when the surface-to-volume ratio is kept constant. The average velocity of the fluid in the TPMS HX should be 0.3 m/s. The corresponding Re is between 300~800. Thin wall thickness, small equivalent thickness, and flat lattice configurations can significantly reduce pressure drop while maintaining the overall heat transfer coefficient. Additionally, the angle between the flow direction and TPMS orientation can increase pressure drop. Three aluminum heat exchangers were successfully printed using an AM machine, and testing results are comparable with theoretical prediction.

42 ENGINEERING↗
DOE OSTI2024

An engineering prototype of a late stage ionization cooling cell for a muon collider

Achieving the low emittances necessary for a muon collider requires ionization cooling. Much of that cooling occurs in compact cooling cells where superconducting coils and conventional RF cavities are closely interleaved [1]. The real challenges for these cooling cells reside in their engineering challenges: high field solenoids, RF cavities, and absorbers, often designed near technological limits, placed in close proximity to each other. We thus propose to build a prototype ionization cooling cell to demonstrate the capability of constructing an ionization cooling channel reaching the lowest emittances and to provide engineering input for the design of such beamlines. The magnets and cavities will be powered at their design values, and an absorber will be included along with a mechanism for heating the absorber similarly to how a beam would.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

An Engineering Prototype of a Late Stage Ionization Cooling Cell for a Muon Collider

Achieving the low emittances required for a muon collider requires ionization cooling. Much of that cooling occurs in compact cooling cells where superconducting coils and conventional RF cavities are closely interleaved. The real challenges for these cooling cells reside in their engineering challenges: high field solenoids, RF cavities, and absorbers, often designed near technological limits, placed in close proximity to each other. We thus propose to build a prototype ionization cooling cell to demonstrate the capability of constructing an ionization cooling channel reaching the lowest emittances and to provide engineering input for the design of such beamlines.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

A miniature multi-anvil apparatus using diamond as anvils—MDAC: Multi-axis diamond anvil cell

The diamond anvil cell (DAC) has been widely used in high-pressure research. Despite significant progress over the past five decades, the opposed anvil geometry in the DAC inevitably leads to a disk-shaped sample configuration at high pressure. This intrinsic limitation is largely responsible for the large pressure and temperature gradients in the DAC, which often compromise precise experiments and their characterizations. Here, we designed and fabricated a multi-axis diamond anvil cell (MDAC) by adopting the concept of a multi-anvil apparatus but using single crystal diamonds as the anvil material. Preliminary data show that the MDAC can generate extreme pressure conditions above 100 GPa. The advantages of the MDAC over a traditional opposed anvil DAC include thicker, voluminous samples, quasi-hydrostatic, or designed deviatoric stress conditions, and multidirectional access windows for optical applications and x-ray probes. In this article, we present the design and performance of a prototype MDAC, as well as the application prospects in high-pressure research.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Design and Validation of Mechanical & Autonomous Systems in Harsh Environments [Poster]

The autonomous systems within the Mobile Hot Cell provide advanced capabilities over traditional hot cells, pushing the boundaries of these systems in harsh environments. The degraded state of some radiological devices and the variety of designs present a series of challenges that require innovative tooling and procedural solutions. By leveraging technical knowledge and experience from disposition experts at SwRi and other institutions, initial design concepts were produced using rapid prototyping techniques. These concepts were then validated and optimized in a non-hazardous test bed, resulting in iterative improvements at minimal cost.

07 - ISOTOPES AND RADIATION SOURCES↗
DOE OSTI2025

THE DESIGN OF RADIAL HONEYCOMB LATTICES FOR IMPACT ENERGY ABSORPTION IN RADIOACTIVE MATERIALS PACKAGES

In this research we present a variation on the corrugation technique of honeycomb lattices, for cylindrical honeycombs, making them much easier to design for impact energy absorption in radioactive materials packages. This variation, termed radial honeycomb lattices, eliminates the residual strain and saddle effect. The use of honeycomb lattices provides advantages over the typically used foams. While foams are effective at absorbing impact energy, they can burn, their material properties are difficult to control, they can degrade over time, and procurement of raw materials can be dependent on timing of manufacturer batch runs. While the weaknesses of foam are strengths for honeycomb lattices, lattices have a different set of problems. Typically, when cylindrical honeycomb lattices are manufactured, they are manufactured flat, wrapped around a mandrel of the desired radius, and then brazed. This approach introduces residual strains, resulting in the saddle effect, which limits both the radial thickness and cylinder length. The radial honeycomb lattice approach presented here makes the design of thicker and longer cylinder honeycombs possible. To address these issues, we propose a honeycomb lattice which changes in cross-section from the inner to the outer radius of the cylinder. This causes the lattice to automatically wrap into a cylinder as it exits the corrugating gears. The theoretically bounding case, of a square cross-section at the inner radius, transitioning through a hexagon, to a diamond cross-section at the outer radius, results in a maximum thickness of approximately 41% of the inner radius. Full mathematical derivations, implemented in computer code, allow for the design of an entire radial honeycomb lattice, including the corrugating gears. To accomplish this only the radial thickness, inner cross-section shape, cell size, and nominal gear radius need to be specified, making the design of these lattices very efficient. Radial honeycomb lattice prototypes have demonstrated that the honeycomb does indeed wrap into a cylinder as intended, without the saddle effect, and can therefore be used to create thick-walled cylinders of any length. These design improvements make cylindrical honeycomb lattices much more accessible as a design element for radioactive materials packages

Johnson, William R. [Savannah River National Labor↗
DOE OSTI2024

Neural architecture search via similarity adaptive guidance

Evolutionary neural network architecture search (ENAS) has attracted the attention of many experts due to its global optimization capabilities to automatically search for convolutional neural network architectures based on the target task. The current search space for ENAS is not to design a fully structured network, but to search for smaller cell architectures to reduce search costs. However, blind search strategies do not effectively utilize the potential experience of the population. In order to utilize the potential experience learned by the current population to guide the evolutionary search of the population, we propose a similarity guided neural network architecture search algorithm based on cell architecture, which utilizes the similarity between pairwise architectures in the population as empirical knowledge learned by the population. Our proposed algorithm provides a novel method for calculating architecture similarity, which calculates architecture similarity separately from the cell and macro-structure. Then we decouple the connections and operations in the cell and calculate connection and operation similarity separately. In addition, we propose adaptive similarity selection and binary tournament selection strategies to enhance the algorithm’s global and local search capabilities and effectively explore the search space. Finally, we design an improved single-point crossover operator to enhance the local search ability of the evolutionary operator. The experimental results show that SAGNAS is a competitive algorithm that achieves 97.44% and 81.60% in CIFAR10 and CIFAR100 with only 1.9 GPU-days spent.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Safety Review of the Hydrogen Components of a Reference Design of the Wind-H2-Green Steel/Ammonia Project

The Department of Energy Hydrogen Fuel Cell Technology Office and Wind Energy Technologies Office’s Wind-H2-Green Steel/Ammonia project is an initiative to demonstrate the feasibility and efficacy of GW-scale integrated energy systems. The team designed reference facilities that utilize wind- and solar-produced hydrogen for industrial steel and ammonia production. This novel concept warranted review of safety codes and standards as they apply to the designs and the identification of codes and standards as they apply to the designs and the identification of codes and standards gaps. This report reviews hydrogen production and storage codes and standards using reference design specifications from a Minnesota steel plant. Requirements, recommendations, and exclusions for the system were identified. Observed gaps included non-specific salt cavern storage requirements, electrolyzer capacity beyond regulated ranges, and lack of requirements for iron reduction via hydrogen. This report will aide future project design efforts and may provide a basis for safety reviews in new designs for industrial facilities with hydrogen production integration.

08 HYDROGEN↗
DOE OSTI2024

Safety Review of the Hydrogen Components of a Reference Design of the Wind-H2-Green Steel/Ammonia Project

The Department of Energy Hydrogen Fuel Cell Technology Office and Wind Energy Technologies Office's Wind-H2-Green Steel/Ammonia project is an initiative to demonstrate the feasibility and efficacy of GW-scale integrated energy systems. The team designed reference facilities that utilize wind- and solar-produced hydrogen for industrial steel and ammonia production. This novel concept warranted review of safety codes and standards as they apply to the designs and the identification of codes and standards gaps. This report reviews hydrogen production and storage codes and standards using reference design specifications from a Minnesota steel plant. Requirements, recommendations, and exclusions for the system were identified. Observed gaps included non-specific salt cavern storage requirements, electrolyzer capacity beyond regulated ranges, and lack of requirements for iron reduction via hydrogen. This report will aide future project design efforts and may provide a basis for safety reviews in new designs for industrial facilities with hydrogen production integration.

08 HYDROGEN↗
DOE OSTI2025

Revisiting the Role of Entropy for Charge Separation in 1D Pi-Conjugated Semiconductors

Free carrier generation in organic donor/acceptor heterojunctions and redox-doped organic semiconductors is poorly understood, since assumed tight electron-hole binding conflicts with observed high free carrier yields. Cornerstone analyses that have guided the field for over 15 years predict that entropy can stabilize free charges in 2D and 3D pi-conjugated semiconductors but not in 1D systems. Here, the impact of entropy on charge generation in 1D pi-conjugated semiconductors is revisited by exploiting a greatly simplified system where enthalpy considerations alone should not allow for free charge generation. Noncontact solution-phase microwave conductivity is used to investigate the carrier density-dependent conductivity and dielectric constant in isolated chemically doped semiconducting single-walled carbon nanotubes in a low-dielectric solvent. Dopant chemical structure dramatically influences the carrier density-dependent complex conductivity, with bulky dopants facilitating carrier escape even at carrier densities below one carrier per nanotube. Three distinct numerical calculations show that entropic stabilization dramatically lowers the Gibbs energy barrier for free charge generation, explaining the high yield of free carriers, even in 1D. This renewed understanding of entropy's role in carrier generation has important implications for designing organic electronic devices-such as solar cells and thermoelectric energy harvesters-for enhanced carrier yield, conductivity, and performance.

36 MATERIALS SCIENCE↗
DOE OSTI2025

ReSpike: A Co-Design Framework for Evaluating SNNs on ReRAM-Based Neuromorphic Processors

With Moore’s law approaching its end, traditional von Neumann architectures are struggling to keep up with the exceeding performance and memory requirements of artificial intelligence and machine learning algorithms. Unconventional computing approaches such as neuromorphic computing that leverage spiking neural networks (SNNs) to perform computation are gaining traction and seek the paradigm shift necessary to sustain the increasing demands of modern applications. Novel memory technologies, such as resistive RAM (ReRAM), employ a crossbar architecture that possesses the inherent capability of efficiently computing vector-matrix multiplication—a dominant operation in SNNs. The prospect of naturally mapping SNNs to the crossbar structures provides a unique opportunity for achieving a high-performance, power-efficient neuromorphic system. In this work, we present ReSpike, which is a new framework, behavioral simulator, and architectural design based on ReRAM crossbar architectures, enabling modeling and co-design to achieve efficient execution of SNNs. We drive this co-design forward by quantifying the impact that ReRAM cell nonidealities have on the corresponding accuracy of an SNN application.

Asifuzzaman, Kazi [ORNL] (ORCID:0000000240044791)↗
DOE OSTI2025

Commissioning of Extended Electron Beam Ion Source at Brookhaven National Laboratory

Here, the Extended Electron Beam Ion Source (EEBIS) has been installed and commissioned at Brookhaven National Laboratory (BNL) hadron accelerator complex in the spring of 2023. EEBIS has replaced its predecessor, RhicEBIS, which provided ions for BNL hadron facilities for over a decade since 2009. The motivations for the source upgrade are to provide higher intensities of the Au 32+ ion beam for the Relativistic Heavy Ion Collider (RHIC) and to provide of an intense source of polarized 3 He 2+ ions for the future Electron Ion Collider (EIC) at BNL. EEBIS is and will continue to be the primary source for a variety of different ion species for the NASA Space Radiation Laboratory (NSRL) at BNL. EEBIS utilizes two identical, two-meter-long unshielded 5T warm bore superconducting solenoids, and it is operated with electron beam current up to 10 A, providing a high-capacity ion traps to fulfill the requirement for high intensity ion beams. The upstream solenoid contains a “short ion trap” with a length of 95 cm, while the “long ion trap” with a length of 178 cm is located inside the downstream solenoid bore. The main features of EEBIS are: * A Gas injection and ionization cell equipped with a Lorenz pulse valve * High-capacity ZAO non-evaporable getter (NEG) custom linear pumping units * In situ apparatus for pumping speed measurements to monitor NEG activation and saturation * “External drift tube” construction with differential pumping stages to provide space for Lorentz pulse valve and 3 He high-field polarization cell * A Ba oxide electron gun cathode. The design of EEBIS as well as the results of its commissioning and first-year operation are presented and discussed.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Compression–tension cell with sample manipulator for in situ X‐ray nanotomography experiments

In situ X-ray nanotomography experiments where tensile or compressive force is applied on the sample require specialized equipment. A compression-tension device with fluid flow-through capability has been designed for X-ray nanotomography beamlines. The compression-tension cell is equipped with a triaxial stage for sample alignment and a high sensitivity loadcell for measurement of applied force. To handle the <100 µm samples used for X-ray nanotomography imaging and for loading samples on the compression-tension cell a sample manipulator has been built. The sample manipulator is capable of selecting a single <100 µm particle for nanotomography scanning while viewing multiple samples under an optical microscope. To test the functionality of these two devices an initial compression experiment involving two glass beads was performed. To demonstrate instrument stability two spherical glass beads were compressed from a no load condition until one of the beads fractured. Nanotomography data were collected at each step of increasing compressive force. The experimentally observed contact area of the spherical glass beads was compared with the theoretical estimate using the Hertz analysis. To demonstrate the fluid flow capability, two calcite grains were compressed against each other under a calcite saturated solution. Surface topological changes were observed for the stressed grain contact area.

X-ray tomography↗