Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ceramic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Morphologies, Processing and Properties of Ceramic Foams and Their Potential as TPS Materials

The current research is focused on processing ceramic foams with compositions that have potential as a thermal protection material. The use of pre-ceramic polymers with the addition of sacrificial blowing agents or sacrificial fillers offers a viable approach to form either open or closed cell insulation. Our work demonstrates that this is a feasible method to form refractory ceramic foams at relatively low processing temperatures. It is possible to foam complex shapes then pyrolize the system to form a ceramic while retaining the shape of the unfired foam. Initial work focused on identifying suitable pre-ceramic polymers with desired properties such as ceramic yield and chemical make up of the pyrolysis product after firing. We focused on making foams in the Si system (Sic, Si02, Si-0-C), which is in use in current acreage TPS systems. Ceramic foams with different architectures were formed from the pyrolysis of pre-ceramic polymers at 1200 C in different atmospheres. In some systems a sacrificial polyurethane was used as the blowing agent. We have also processed foams using sacrificial fillers to introduce controlled cell sizes. Each sacrificial filler or blowing agent leads to a unique morphology. The effect of different fillers on foam morphologies and the characterization of these foams in terms of mechanical and thermal properties are presented. We have conducted preliminary arc jet testing on selected foams with the materials being exposed to typical re-entry conditions for acreage TPS and these results will be discussed. Foams processed using these approaches have bulk densities ranging from 0.15 to 0.9 g/cm3 and cell sizes ranging from 5 to 500 pm. Compression strengths ranged from 2 to 7 MPa for these systems. Finally, preliminary oxidation studies have been conducted on selected systems and will be discussed.

Stackpoole, Mairead↗

Joining and Assembly of Silicon Carbide-based Advanced Ceramics and Composites for High Temperature Applications

Silicon carbide based advanced ceramics and fiber reinforced composites are under active consideration for use in wide variety of high temperature applications within the aeronautics, space transportation, energy, and nuclear industries. The engineering designs of ceramic and composite component require fabrication and manufacturing of large and complex shaped parts of various thicknesses. In many instances, it is more economical to build up complex shapes by joining simple geometrical shapes. In addition these components have to be joined or assembled with metallic sub-components. Thus, joining and attachment have been recognized as enabling technologies for successful utilization of ceramic components in various demanding applications. In this presentation, various challenges and opportunities in design, fabrication, and testing o high temperature joints in ceramic matrix composites will be presented. Silicon carbide based advanced ceramics (CVD and hot pressed), and C/SiC and SiC/SiC composites, in different shapes and sizes, have been joined using an affordable, robust ceramic joining technology (ARCJoinT). Microstructure and high temperature mechanical properties of joints in silicon carbide ceramics and CVI and melt infiltrated SiC matrix composites will,be reported. Various joint design philosophies and design issues in joining of ceramics and composites well be discussed.

Singh, M.↗

Ceramic Integration Technologies for Aerospace and Energy Systems: Technical Challenges and Opportunities

Ceramic integration technology has been recognized as an enabling technology for the implementation of advanced ceramic systems in a number of high-temperature applications in aerospace, power generation, nuclear, chemical, and electronic industries. Various ceramic integration technologies (joining, brazing, attachments, repair, etc.) play a role in fabrication and manufacturing of large and complex shaped parts of various functionalities. However, the development of robust and reliable integrated systems with optimum performance requires the understanding of many thermochemical and thermomechanical factors, particularly for high temperature applications. In this presentation, various challenges and opportunities in design, fabrication, and testing of integrated similar (ceramic-ceramic) and dissimilar (ceramic-metal) material systems will be discussed. Experimental results for bonding and integration of SiC based LDI fuel injector, high conductivity C/C composite based heat rejection system, solid oxide fuel cells system, ultra high temperature ceramics for leading edges, and ceramic composites for thermostructural applications will be presented. Potential opportunities and need for the development of innovative design philosophies, approaches, and integrated system testing under simulated application conditions will also be discussed.

Singh, Mrityunjay↗

Ceramic substrate including thin film multilayer surface conductor

A ceramic substrate comprises a plurality of ceramic sheets, a plurality of inner conductive layers, a plurality of vias, and an upper conductive layer. The ceramic sheets are stacked one on top of another and include a top ceramic sheet. The inner conductive layers include electrically conductive material that forms electrically conductive features on an upper surface of each ceramic sheet excluding the top ceramic sheet. The vias are formed in each of the ceramic sheets with each via being filled with electrically conductive material. The upper conductive layer includes electrically conductive material that forms electrically conductive features on an upper surface of the top ceramic sheet. The upper conductive layer is constructed from a stack of four sublayers. A first sublayer is formed from titanium. A second sublayer is formed from copper. A third sublayer is formed from platinum. A fourth sublayer is formed from gold.

36 MATERIALS SCIENCE↗

Metal-ceramic composite powders

A process for manufacturing metal-ceramic composite material powder comprising ball milling metal powder and ceramic nanoparticles to yield a metal-ceramic composite powder comprising ceramic nanoparticles embedded in a metal matrix powder particles; wherein the ball milling is performed using a ceramic milling media and a milling vessel having a ceramic interior surface. Metal matrix nanocomposite powders comprising ceramic nanoparticles imbedded in metal matrix powder particles; wherein the metal matrix powder particles have a spherical shape; wherein there is uniform distribution the ceramic nanoparticles; wherein the nanocomposite powders have good flowability.

Chen, Lianyi↗

Glass Ceramic Formulation Data Package

A glass ceramic waste form is being developed for treatment of secondary waste streams generated by aqueous reprocessing of commercial used nuclear fuel (Crum et al. 2012b). The waste stream contains a mixture of transition metals, alkali, alkaline earths, and lanthanides, several of which exceed the solubility limits of a single phase borosilicate glass (Crum et al. 2009; Caurant et al. 2007). A multi-phase glass ceramic waste form allows incorporation of insoluble components of the waste by designed crystallization into durable heat tolerant phases. The glass ceramic formulation and processing targets the formation of the following three stable crystalline phases: (1) powellite (XMoO 4 ) where X can be (Ca, Sr, Ba, and/or Ln), (2) oxyapatite Y x, Z (10-x) Si 6 O 26 where Y is alkaline earth, Z is Ln, and (3) lanthanide borosilicate (Ln 5 BSi 2 O 13 ). These three phases incorporate the waste components that are above the solubility limit of a single-phase borosilicate glass. The glass ceramic is designed to be a single phase melt, just like a borosilicate glass, and then crystallize upon slow cooling to form the targeted phases. The slow cooling schedule is based on the centerline cooling profile of a 2 foot diameter canister such as the Hanford High-Level Waste canister. Up to this point, crucible testing has been used for glass ceramic development, with cold crucible induction melter (CCIM) targeted as the ultimate processing technology for the waste form. Idaho National Laboratory (INL) will conduct a scaled CCIM test in FY2012 with a glass ceramic to demonstrate the processing behavior. This Data Package documents the laboratory studies of the glass ceramic composition to support the CCIM test. Pacific Northwest National Laboratory (PNNL) measured melt viscosity, electrical conductivity, and crystallization behavior upon cooling to identify a processing window (temperature range) for melter operation and cooling profiles necessary to crystallize the targeted phases in the waste form.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Preparation and characterization of novel foamed porous glass-ceramics

Foamed glass-ceramics without using foaming agent have been synthesized in a novel glass system of SrO-CaO-Al{sub 2}O{sub 3}-TiO{sub 2}-B{sub 2}O{sub 3}-SiO{sub 2}-P{sub 2}O{sub 5}-M{sub x}O{sub y} (where M = Ba, Mg, La, Ce and Ni) by a simple process of powder sintering. The glass and glass-ceramics are characterized by dilatometry, differential scanning calorimetry (DSC), heating stage microscopy (HSM), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), optical microscopy and Fourier transformed infrared spectroscopy (FTIR). All the glasses formed are amorphous and the glass transition temperature and dilatometric softening temperature of these glasses are found to be in the range 673–678 °C and 706–728 °C respectively. The glasses are highly stable as indicated by the DSC evaluated glass stability parameters of the range 195–240 °C. Quantitative sintering study of glass powder compacts revealed swelling in the samples with NiO and CeO{sub 2} corresponding to a geometry change of 75 and 108% around 900 °C respectively. With reference to this finding the glass powder compacts are heated to 900 °C and the foamed glass-ceramics are obtained. Characteristic crystalline silicate phases have been identified in the XRD studies and their microstructures are recorded by FESEM. Optical microscope study of the foamed samples revealed formation of bigger foamed cavity with residual pores in samples with NiO and CeO{sub 2} in comparison to samples with BaO, MgO and La{sub 2}O{sub 3}. The mean pore diameters of the samples with NiO and CeO{sub 2} are determined to be 43 and 32 μm, and their respective porosities are 2.34 and 1.82 cm{sup 3}/g respectively. Thus NiO and CeO{sub 2} are found to be very effective to obtain foamed glass-ceramics without using foaming agent by the viscous flow sintering of fine glass powder compacts along with the reduction of the respective polyvalent ions. - Highlights: • Synthesis of foamed porous glass-ceramics without foaming agent by sintering method • Only powder compact yielded foamed porous glass-ceramics but bulk glass did not. • Glasses containing NiO and CeO{sub 2} exhibited significant foaming efficiency. • Bloating of entrapped gas during viscous flow sintering is the origin of foaming. • Residual void created pores in the sintered glass-ceramics as evidenced in FESEM.

36 MATERIALS SCIENCE↗

Effect of Pb(Fe{sub 1/2}Nb{sub 1/2})O{sub 3} modification on dielectric and piezoelectric properties of Pb(Mg{sub 1/3}Nb{sub 2/3})O{sub 3}-PbZr{sub 0.52}Ti{sub 0.48}O{sub 3} ceramics

Highlights: {yields} 10 mol% PFN modified PMN-PZT relaxor ferroelectric ceramics were prepared by the conventional solid-state mixed-oxide technique, and their structure, dielectric and piezoelectric properties were studied. {yields} At the frequency of 1 kHz, the maximum dielectric constant at room temperature ({epsilon}{sub r}) was 3519 and maximum dielectric constant ({epsilon}{sub m}) was 20,475, corresponding to the (0.9 - x)PMN-0.1PFN-xPZT ceramic composition of x = 0.8. While the sample with composition of x = 0.3 possessed the maximum dielectric relaxor factor of {gamma} = 1.94. The Curie temperature T{sub c} could be higher than 300 {sup o}C around morphotropic phase boundary (MPB) area which is much higher than some other system. {yields} The largest d{sub 33} could be as high as 318 pC/N when x = 0.9. And the maximum remnant polarization P{sub r} was 28.3 {mu}C/cm{sup 2} at x = 0.4. -- Abstract: 10 mol% Pb(Fe{sub 1/2}Nb{sub 1/2})O{sub 3} (PFN) modified Pb(Mg{sub 1/3}Nb{sub 2/3})O{sub 3}-PbZr{sub 0.52}Ti{sub 0.48}O{sub 3} (PMN-PZT) relaxor ferroelectric ceramics with compositions of (0.9 - x)PMN-0.1PFN-xPZT (x = 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8 and 0.9) were prepared. X-ray diffraction investigations indicated that as-prepared ceramics were of pure perovskite phase and the sample with composition of x = 0.8 was close to morphotropic phase boundary (MPB) between rhombohedral and tetragonal phase. Dielectric properties of the as-prepared ceramics were measured, and the Curie temperature (T{sub c}) increased sharply with increasing PZT content and could be higher than 300 {sup o}C around morphotropic phase boundary (MPB) area. At 1 kHz, the sample with composition of x = 0.1 had the largest room temperature dielectric constant {epsilon}{sub r} = 3519 and maximum dielectric constant {epsilon}{sub m} = 20,475 at T{sub m}, while the sample with composition of x = 0.3 possessed the maximum dielectric relaxor factor of {gamma} = 1.94. The largest d{sub 33} = 318 pC/N could be obtained from as-prepared ceramics at x = 0.9. The maximum remnant polarization (P{sub r} = 28.3 {mu}C/cm{sup 2}) was obtained from as-prepared ceramics at x = 0.4.

36 MATERIALS SCIENCE↗

The effects of CeO{sub 2} addition on crystallization behavior and pore size in microporous calcium titanium phosphate glass ceramics

Highlights: ► We prepare a phosphate glass ceramic in the system of CaO–TiO{sub 2}–P{sub 2}O{sub 5} and add 2 to 6 mol% CeO{sub 2} to it. We determine the optimum percentage of CeO{sub 2} addition. ► We study phase separation, suitable time and temperature for crystallization in the microporous Calcium Titanium Phosphate Glass Ceramics utilizing DTA, SEM and XRD. ► We investigate on pore size utilizing BET and SEM techniques before and after CeO{sub 2} addition. ► CeO{sub 2} increases the pore size in the Calcium Titanium Phosphate Glass Ceramics. -- Abstract: In this research the effect of the addition of CeO{sub 2} to microporous Calcium Titanium Phosphate glass ceramics was studied. Different molar percentages of CeO{sub 2} were added to three samples of a base glass whose composition was P{sub 2}O{sub 5} 30, CaO 45, TiO{sub 2} 25 (mol%). The first sample had 2 mol% CeO{sub 2}, the second sample had 4 mol% CeO{sub 2}, and the third sample had 6 mol% CeO{sub 2}. The fourth sample did not contain any CeO{sub 2}. The glass samples were melted and crystallized to bulk glass ceramics by a conventional method. Differential Thermal Analysis (DTA) was utilized to determine the appropriate nucleation and crystallization temperatures. Among the samples, the DTA curve of the sample which had 2 mol% CeO{sub 2} had the sharpest crystallization peak. Therefore, this sample was chosen to prepare the glass ceramics. Using X-ray Diffraction (XRD) it was found that in all samples β-Ca{sub 3}(PO{sub 4}){sub 2} and CaTi{sub 4}(PO{sub 4}){sub 6} were the major phases. The β-Ca{sub 3}(PO{sub 4}){sub 2} phase was dissolved away by soaking the glass ceramics in HCl, leaving a porous skeleton of CaTi{sub 4}(PO{sub 4}){sub 6}. CeO{sub 2} addition increased the glass transition temperature and decreased the crystallization time and temperature. It was shown that CeO{sub 2} addition resulted in an increase in the mean pore diameter while the specific surface area decreased. The median pore diameter and specific surface area were determined as 27 nm and 14 m{sup 2}/g, respectively, for the sample containing 2 mol% CeO{sub 2}.

36 MATERIALS SCIENCE↗

Modified giant dielectric properties of samarium doped CaCu{sub 3}Ti{sub 4}O{sub 12} ceramics

Highlights: ► Grain size of CaCu{sub 3}Ti{sub 4}O{sub 12} ceramics was greatly decreased by doping with Sm{sup 3+}. ► ε′ and tan δ decreased with increasing the concentration of Sm{sup 3+} doping. ► Ca{sub 0.925}Sm{sub 0.05}Cu{sub 3}Ti{sub 4}O{sub 12} exhibited ε′ ∼ 10,863 and low tan δ ∼ 0.043 at 20 °C and 1 kHz. -- Abstract: Effects of Sm{sup 3+} substitution on the microstructure and dielectric properties of CaCu{sub 3}Ti{sub 4}O{sub 12} ceramics were investigated. The grain size of CaCu{sub 3}Ti{sub 4}O{sub 12} ceramics was greatly decreased by doping with Sm{sup 3+}, resulting from the ability of Sm{sup 3+} to inhibit the grain growth rate. This result can cause a decrease in the dielectric constant (ε′) and loss tangent (tan δ) of CaCu{sub 3}Ti{sub 4}O{sub 12} ceramics. Interestingly, high dielectric permittivity (ε′ ∼ 10,863) and low loss tangent (tan δ ∼ 0.043 at 20 °C and 1 kHz) were observed in the Ca{sub 0.925}Sm{sub 0.05}Cu{sub 3}Ti{sub 4}O{sub 12} ceramic. Nonlinear electrical properties of CaCu{sub 3}Ti{sub 4}O{sub 12} ceramics were modified by doping with Sm{sup 3+}. The dielectric relaxation behavior of Sm-doped CaCu{sub 3}Ti{sub 4}O{sub 12} ceramics can be well ascribed based on the internal barrier layer capacitor model of Schottky barriers at the grain boundaries.

36 MATERIALS SCIENCE↗

High energy storage density performance of Ba, Sr-modified lead lanthanum zirconate titanate stannate antiferroelectric ceramics

Graphical abstract: Polarization hysteresis (P–E) loops of the (Pb{sub 0.85}Ba{sub 0.08}Sr{sub 0.03}La{sub 0.03}) (Zr{sub 0.74}Sn{sub 0.22}Ti{sub 0.04}) samples: (a) measured at different applied electric-field and (b) measured at different temperatures is shown. It is typical antiferroelectrics whose remnant polarization is zero. As the remnant polarization of AFE is small and the ceramics are accompanied by the formation of the anti-parallel domain structure, energy stored in PLZST can be effectively released. Thus we calculated the energy density from the P–E loop and obtained the power density was up to 1.2 J/cm{sup 3} at 55 °C, and at 45 °C the energy density was ∼1.24 J/cm{sup 3}. As usual, for bulk ceramics, the switching between the AFE and FE states occurs at lower field. This value is much higher than that reported previously for the PLZT bulk ceramic (0.4 J/cm{sup 3}). - Highlights: • Ba{sup 2+}, Sr{sup 2+} co-doping caused the T{sub c} of PLZST moved to the lower temperature (T{sub c} ≈ 40 °C). • The ΔE was so smaller, E{sub AF} ≈ 90 kV/cm and E{sub FA} ≈ 85 kV/cm. • Ba, Sr co-doped PLZST ceramic exhibited slanted P–E loops with a large breakdown field (100 kV/cm). • A high energy density was up to 1.2 J/cm{sup 3}. - Abstract: (Pb{sub 0.85}Ba{sub 0.08}Sr{sub 0.03}La{sub 0.03})(Zr{sub 0.74}Sn{sub 0.22}Ti{sub 0.04}) (Ba, Sr co-doped PLZST) co-doping antiferroelectric (AFE) ceramics with orthorhombic perovskite structure were prepared by the traditional solid state reaction process. It was observed that the doping of barium and strontium caused the Curie temperature of PLZST move to the lower temperature (T{sub c} ≈ 40 °C). Ba, Sr co-doped PLZST AFE ceramics exhibited excellent electrical properties, the AFE to ferroelectric (FE) transition occurred at field E{sub AF} ≈ 90 kV/cm, and the transition from FE to AFE occurred at E{sub FA} ≈ 85 kV/cm. The maximum relative permittivity was about 4800, occurring at a field near the AFE to FE transition point, with a dielectric loss of 0.006. The samples exhibited small ΔE and slanted hysteresis loops with a large breakdown field of 100 kV/cm due to Ba, Sr co-doping ceramics, and a high energy density of 1.2 J/cm{sup 3}.

36 MATERIALS SCIENCE↗

Structure and ferroelectric studies of (Ba{sub 0.85}Ca{sub 0.15})(Ti{sub 0.9}Zr{sub 0.1})O{sub 3} piezoelectric ceramics

Graphical abstract: - Highlights: • (Ba{sub 0.85}Ca{sub 0.15})(Ti{sub 0.9}Zr{sub 0.1})O{sub 3} (BCTZO) ceramic was synthesized by the ceramic method. • In situ XRD and Raman spectra showed the phase transition of BCTZO around 360 K. • The ceramics showed a tunability of 82% at 40 kV cm{sup −1} electric field. • BCTZO exhibited good quality factor of 111 at microwave frequencies. • Piezoforce microscopy studies indicated the switchability of ferroelectric domains. - Abstract: We have synthesized and studied the structural and ferroelectric properties of lead-free 0.5(Ba{sub 0.7}Ca{sub 0.3})TiO{sub 3}–0.5Ba(Zr{sub 0.2}Ti{sub 0.8})O{sub 3} ceramics in the temperature region of its ferroelectric transition. The synthesized material showed high dielectric constant, low loss and good pyroelectric figure of merit. From the temperature dependent X-ray diffraction measurements, we determined the tricritical point to be in the temperature range of 303–400 K. The dielectric measurements indicate a diffuse ferroelectric phase transition (DPT) around 360 K in agreement with the X-ray measurements. We studied the evolution of Raman spectra with temperature to understand the nature of phase transition in BaTiO{sub 3} (BTO) and the BCTZO. The results indicates that the transition of ferroelectric–paraelectric state is not sharp as in the case of BTO and the polar state persists through the paraelectric state. In general, our study indicates that there are ferroelectric domains of nanometer size beyond the commonly defined transition temperature. The observation of local piezoelectric hysteresis loop indicated the existence of intrinsic ferroelectric property of the ceramic at the nanoscale. The ceramics exhibited electric field tunable dielectric properties with a tunability of 82% at an applied DC field of 40 kV cm{sup −1}, low dielectric loss of 0.001 and room temperature pyroelectric coefficient of 6 × 10{sup −8} C cm{sup −2} K{sup −1} and the detectivity of 1.9 × 10{sup −8} C cm{sup −1} J{sup −1}; larger than those reported for other BaTiO{sub 3}-based materials. Overall, our results indicate that BCTZO ceramics with coexistence of rhombohedral–tetragonal phases is a promising candidate for lead-free ferroelectric applications.

36 MATERIALS SCIENCE↗

Microstructure and dielectric properties of BaTiO{sub 3} ceramic doped with yttrium, magnesium, gallium and silicon for AC capacitor application

Graphical abstract: Core–shell structure can be obtained in BaTiO{sub 3} ceramics co-doped with Y–Mg-Ga-Si. Y-Mg-Ga-Si co-dopant can obviously reduce dielectric loss, improve AC breakdown voltage and flatten temperature dependence of capacitance curve. - Highlights: • Y-Mg-Ga-Si co-doped BaTiO{sub 3} ceramics with core-shell structure were prepared. • Y{sup 3+}, Mg{sup 2+}, and Ga{sup 3+} dissolved in the lattice BaTiO{sub 3} replacing Ba{sup 2+} site or Ti{sup 4+} site. • Y{sup 3+} and Ga{sup 3+} tended to remain close to the grain boundaries as a shell maker. • Y-Mg-Ga-Si co-doped BaTiO{sub 3} ceramics show high AC breakdown voltage and low tanδ. - Abstract: The microstructures and dielectric properties of Y-Mg-Ga-Si co-doped barium titanate ceramics were investigated. Y{sup 3+} dissolved in the lattice of BaTiO{sub 3} replacing both Ba{sup 2+} site and Ti{sup 4+} site, and Mg{sup 2+} replaced Ti{sup 4+} site. The replacements of Y{sup 3+} and Mg{sup 2+} inhibit the grain growth, cause tetragonal-to-pseudocubic phase transition, reduce the dielectric loss, and flatten the temperature dependence of capacitance curve. The incorporation of Ga{sup 3+} can improve sintering and increase permittivity. Y{sup 3+} and Ga{sup 3+} tended to remain close to the grain boundaries, and play an important role as a shell maker in the formation of the core–shell structure in the co-doped BaTiO{sub 3} ceramics. Excellent dielectric properties: ϵ{sub r} = ∼2487, tanδ = ∼0.7% (at 1 kHz), ΔC/C{sub 25} < ∼6.56% (from −55 °C to 125 °C) and alternating current breakdown voltage E < ∼4.02 kV/mm can be achieved in the BaTiO{sub 3}–0.02Y{sub 2}O{sub 3}–0.03MgO–0.01Ga{sub 2}O{sub 3}–0.005SiO{sub 2} ceramics sintered at 1380 °C. This material has a potential application in alternating current multilayer ceramic capacitor.

36 MATERIALS SCIENCE↗

Spectroscopic analysis on the basis Judd–Ofelt theory of Nd{sup 3+} in (Y{sub 0.985}Nd{sub 0.015}){sub 2}O{sub 3}: A transparent laser-host ceramic

Highlights: • Transparent Y{sub 2}O{sub 3} ceramic with 1.5 atm% doping of neodymium (Nd) was fabricated and its spectroscopic properties were investigated using Judd–Ofelt theory. • The Judd–Oflet parameters, computed from the absorption bands of Nd{sup 3+} ion, are Ω{sub 2} = 8.84 × 10{sup −20} cm{sup 2}, Ω{sub 4} = 9.82 × 10{sup −20} cm{sup 2} and Ω{sub 6} = 4.44 × 10{sup −20} cm{sup 2}. These parameters were used to determine absorption line strength, radiative transition probabilities, fluorescence branch ratio and radiative lifetime for different transitions of Nd{sup 3+}. • The branching ratios for {sup 4}F{sub 3/2} → {sup 4}I{sub 9/2} and {sup 4}F{sub 3/2} → {sup 4}I{sub 11/2} transition are 0.548 and 0.389, respectively. The spectroscopic quality factor was determined to be 2.21, which is higher than 1.0 atm% neodymium doped Y{sub 2}O{sub 3} ceramic. A calculated radiation decay time (τ = 140 μs) is reasonably close to the experimentally measured life time (153 μs). The life time for 1.5 mol% Nd doped Y{sub 2}O{sub 3} ceramic which is lower than that of 1.0 atm% neodymium doped ceramic. The lowering of life time was attributed to the presence of concentration quenching effects. • The room temperature emission cross-section for individual Stark bands of {sup 4}F{sub 3/2} → {sup 4}I{sub 9/2} and {sup 4}F{sub 3/2} → {sup 4}I{sub 11/2} transitions was determined. The total emission cross section for {sup 4}F{sub 3/2} → {sup 4}I{sub 9/2} and {sup 4}F{sub 3/2} → {sup 4}I{sub 11/2} transition was found to be 25.49 × 10{sup −20} and 37.04 × 10{sup −20} cm{sup 2}, which is significantly higher than 1.0 atm% Nd{sup 3+} doped Y{sub 2}O{sub 3}ceramic. - Abstract: Spectroscopic investigation of 1.5 atm% Nd{sup 3+} doped Y{sub 2}O{sub 3} transparent ceramic was performed for different emission wavelengths. Judd–Oflet parameters, computed from the absorption bands of Nd{sup 3+} ion, are Ω{sub 2} = 8.84 × 10{sup −20} cm{sup 2}, Ω{sub 4} = 9.82 × 10{sup −20} cm{sup 2} and Ω{sub 6} = 4.44 × 10{sup −20} cm{sup 2}. These parameters were used to determine absorption line strength, radiative transition probabilities, fluorescence branch ratio and radiative lifetime for different transitions of Nd{sup 3+}. The branching ratios for {sup 4}F{sub 3/2} → {sup 4}I{sub 9/2} and {sup 4}F{sub 3/2} → {sup 4}I{sub 11/2} transition are 0.548 and 0.389, respectively. The calculated radiative lifetime (140 μs) is in good agreement with the measured lifetime (153 μs). The room temperature emission cross-section of individual Stark bands of {sup 4}F{sub 3/2} → {sup 4}I{sub 9/2} and {sup 4}F{sub 3/2} → {sup 4}I{sub 11/2} transitions was determined. The total emission cross section for {sup 4}F{sub 3/2} → {sup 4}I{sub 9/2} and {sup 4}F{sub 3/2} → {sup 4}I{sub 11/2} transition was found to be 25.49 × 10{sup −20} and 37.04 × 10{sup −20} cm{sup 2}, which is significantly higher than 1.0 atm% Nd{sup 3+} doped Y{sub 2}O{sub 3}ceramic.

36 MATERIALS SCIENCE↗

Preparation and microwave dielectric properties of Li{sub 3}(Mg{sub 0.92}Zn{sub 0.08}){sub 2}NbO{sub 6}–Ba{sub 3}(VO{sub 4}){sub 2} composite ceramics for LTCC applications

Highlights: • Microwave properties of ϵ{sub r} ∼ 16.3, Q × f ∼ 50,084 GHz and τ{sub f} ∼ 1.5 ppm/°C are achieved. • The τ{sub f} value of the LMZN ceramic can be adjusted to near zero by adding BV. • The LMZN–BV composite ceramic can be well sintered at a relatively low temperature. • The composite ceramic has a good chemical compatibility with Ag electrode. - Abstract: In this work, the (1 − x)Li{sub 3}(Mg{sub 0.92}Zn{sub 0.08}){sub 2}NbO{sub 6}–xBa{sub 3}(VO{sub 4}){sub 2} (x = 0.1–0.35) ceramics were prepared via a conventional solid state reaction route. The phase composition, microstructure and microwave dielectric properties were investigated by an X-ray diffractometer (XRD), a scanning electron microscope and a network analyzer. The XRD results indicated that the Li{sub 3}(Mg{sub 0.92}Zn{sub 0.08}){sub 2}NbO{sub 6} and Ba{sub 3}(VO{sub 4}){sub 2} phases could well coexist without forming any secondary phases. The dielectric constant (ϵ{sub r}) and quality factor (Q × f) values of the Li{sub 3}(Mg{sub 0.92}Zn{sub 0.08}){sub 2}NbO{sub 6} ceramic decreased with the addition of Ba{sub 3}(VO{sub 4}){sub 2} phase, however its temperature coefficient of resonant frequency (τ{sub f}) value was improved significantly. Excellent microwave dielectric properties of ϵ{sub r} ∼ 16.3, Q × f ∼ 50,084 GHz (at 8.64 GHz) and τ{sub f} ∼ 1.5 ppm/°C were achieved for the x = 0.3 sample when sintered at 950 °C for 4 h. The chemical compatibility with Ag electrode indicated that the 0.7Li{sub 3}(Mg{sub 0.92}Zn{sub 0.08}){sub 2}NbO{sub 6}–0.3Ba{sub 3}(VO{sub 4}){sub 2} composite ceramic would be a promising material for the low temperature cofired ceramic applications.

36 MATERIALS SCIENCE↗

Influence of sintering conditions on the microstructure and optical properties of Eu: CaF{sub 2} transparent ceramic

Highlights: • Eu: CaF2 ceramics sintering at different conditions were fabricated by HP method. • The results show that the temperatures have great effect on the microstructure. • The ceramic sintered at 600 °C/30 MPa has high transmittance and pore-free structure. • The diffusion and densification process mainly occurs between 350 °C and 500 °C. • The optical losses in ceramic were caused by structure defects and polishing damage. - Abstract: Nanopowders of the 5 at.% Eu doped CaF{sub 2} have been synthesized by co-precipitated method. X-ray diffraction (XRD) indicated that the samples corresponds to the cubic CaF{sub 2} phase and scanning electron microscopy (SEM) showed that the morphology of nanopowders were approximately spherical. The Eu: CaF{sub 2} transparent ceramics were fabricated by hot-pressing (HP) method at different P-T conditions in a vacuum environment. The fracture surface, the relative density, average grain size and shrinkage displacements were also studied to analysis the influence of sintering conditions on Eu: CaF{sub 2} ceramic. In comparison with other samples, the proper sintering temperature and pressure was 600 °C/30 MPa. The transmittance of ceramic was up to 79.7% and 88.85% at the wavelength of 760 nm and 2400 nm. Furthermore, the emission spectra of Eu: CaF{sub 2} transparent ceramics under 393.5 nm excitation was also discussed.

36 MATERIALS SCIENCE↗

Correlation between structure and microwave dielectric properties of low-temperature-fired Mg2SiO4 ceramics

Highlights: • Mg{sub 2}SiO{sub 4}–xLiF ceramics could be sintered at 900 °C. • The microwave dielectric properties were significantly dependent on the structure. • The following optimum properties were achieved in the x = 8 wt% ceramics. • Temperature stability of Mg{sub 2}SiO{sub 4}–8 wt% LiF–6.0vol% CaTiO{sub 3} ceramics was obtained. • These ceramics also exhibited excellent chemical compatibility with Ag. - Abstract: Mg{sub 2}SiO{sub 4}–LiF ceramics were fabricated via a conventional solid-state process and sintered at 900 °C. The secondary phase, Li{sub 2}SiO{sub 3}, was observed with ≤6 wt% LiF, and the Li{sub 2}MgSiO{sub 4} phase was detected with ≥8 wt% LiF. The relative density and secondary phase can account for the decrease in the ε{sub r} with an increase in LiF. The degree of crystallization, unit cell volume, secondary phase, and microstructure correlated with the Q × f values. The value of the τ{sub f} was related to the distortions in the Mg(1)O{sub 6} octahedron and the secondary phase. The sample exhibited excellent properties for Mg{sub 2}SiO{sub 4}–8 wt% LiF with ε{sub r} = 6.1, Q × f = 109719 GHz, and τ{sub f} = − 61 ppm/°C. The temperature stability of the Mg{sub 2}SiO{sub 4}–8 wt%LiF–6 vol%CaTiO{sub 3} ceramics was obtained with ε{sub r} = 7.1, Q × f = 31091 GHz and τ{sub f} = − 2.0 ppm/°C. Mg{sub 2}SiO{sub 4}–LiF–CaTiO{sub 3} ceramics provide excellent chemical compatibility with Ag.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of Erbium doping on the electrical behaviour of CaCu3Ti4O12 ceramics probed by impedance spectroscopy analysis

Highlights: • Influence of Er doping on the electrical behaviour of CaCu{sub 3}Ti{sub 4}O{sub 12} ceramics was reported. • Powder XRD analysis reveals that addition of Er did not affect the crystallinity. • High dielectric constant (ε{sub r} = 26,749) was found for Er doped CaCu{sub 3}Ti{sub 4}O{sub 12} ceramics. • Nyquist plot suggest the negative temperature coefficient of resistance behaviour. - Abstract: Herein, the preparation and impedance spectroscopic investigation of pure and Er doped CaCu{sub 3}Ti{sub 4}O{sub 12} ceramics is reported. FTIR spectroscopy and powder XRD analysis elucidate the surface functionality and crystalline nature of the products respectively. Scanning Electron Microscopy images substantiate the homogenous formation of nanoparticles and the EDS analysis confirms the elemental composition of the products. A relatively high dielectric constant (ε{sub r} = 26,749) is found for Er doped CaCu{sub 3}Ti{sub 4}O{sub 12} ceramics than that of pure CaCu{sub 3}Ti{sub 4}O{sub 12} ceramics (ε{sub r} = 5885) at 10 Hz (at 800 K). Nyquist plot of pure and Er doped CaCu{sub 3}Ti{sub 4}O{sub 12} ceramics indicates the presence of a non-Debye type of relaxation phenomenon, which is further validated from the electrical modulus analysis. The variation of temperature dependent relaxation time of pure and Er doped CaCu{sub 3}Ti{sub 4}O{sub 12} ceramics is estimated from both the imaginary part of impedance and electrical modulus analysis.

77 NANOSCIENCE AND NANOTECHNOLOGY↗