Search NASA⌕ Search

SEARCH · Search NASA

Results for “Cloud effective height”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Simulation of the modern arctic climate by the NCAR CCM1

The National Center of Atmospheric Research (NCAR) Community Climate Model Version 1 (CCM1's) simulation of the modern arctic climate is evaluated by comparing a five-year seasonal cycle simulation with the European Center for Medium-Range Weather Forecasts (ECMWF) global analyses. The sea level pressure (SLP), storm tracks, vertical cross section of height, 500-hPa height, total energy budget, and moisture budget are analyzed to investigate the biases in the simulated arctic climate. The results show that the model simulates anomalously low SLP, too much storm activity, and anomalously strong baroclinicity to the west of Greenland and vice versa to the east of Greenland. This bias is mainly attributed to the model's topographic representation of Greenland. First, the broadened Greenland topography in the model distorts the path of cyclone waves over the North Atlantic Ocean. Second, the model oversimulates the ridge over Greenland, which intensifies its blocking effect and steers the cyclone waves clockwise around it and hence produces an artificial circum-Greenland trough. These biases are significantly alleviated when the horizontal resolution increases to T42. Over the Arctic basin, the model simulates large amounts of low-level (stratus) clouds in winter and almost no stratus in summer, which is opposite to the observations. This bias is mainly due to the location of the simulated SLP features and the negative anomaly of storm activity, which prevent the transport of moisture into this region during summer but favor this transport in winter. The moisture budget analysis shows that the model's net annual precipitation (P-E) between 70 deg N and the North Pole is 6.6 times larger than the observations and the model transports six times more moisture into this region. The bias in the advection term is attributed to the positive moisture fixer scheme and the distorted flow pattern. However, the excessive moisture transport into the Arctic basin does not solely result from the advection term. The contribution by the moisture fixer is as large as from advection. By contrast, the semi-Lagrangian transport scheme used in the CCM2 significantly improves the moisture simulation for this region; however, globally the error is as serious as for the positive moisture fixer scheme. Finally, because the model has such serious problems in simulating the present arctic climate, its simulations of past and future climate change for this region are questionable.

Bromwich, David H.↗
NASA NTRS1994

Sensitivity of a GCM climate simulation to differences in continental versus maritime cloud drop size

Extensive observations indicate a distinct difference between maritime and continental effective drop size, r(sub e), for warm clouds. The latest version of the National Center for Atmospheric Research (NCAR) Community Climate Model (CCM2) is used to explore the sensitivity of differentiating between continental and maritime r(sub e) on the simulated climate. The results of this study indicate that the smaller drop size over continents leads to a reduction of surface-absorbed solar radiation from 20 to 60 W/sq m. This reduction in surface solar flux leads to a cooling of the continents by up to -3.5 K. The reduction in surface solar flux and temperature also leads to a reduction in latent heat flux and precipitation over land. In the January simulation, there is a significant shift in tropical precipitation associated with the Australian monsoon. This shift leads to a response in the extra tropical geopotential height field over the western United States. All of these changes reduce biases in the current version of CCM2.

Kiehl, J. T.↗
NASA NTRS2007

Midweek Increase in U.S. Summer Rain and Storm Heights, Suggests Air Pollution Invigorates Rainstorms

Tropical Rainfall Measuring Mission (TRMM) satellite data show a significant midweek increase in summertime rainfall over the southeast U.S., due to afternoon intensification. TRMM radar data show a significant midweek increase in rain area and in the heights reached by afternoon storms. Weekly variations in model-reanalysis wind patterns over the region and in rain-gauge data are consistent with the satellite data. A midweek decrease of rainfall over the nearby Atlantic is also seen. EPA measurements of particulate concentrations show a midweek peak over much of the U.S. These observations are consistent with the theory that anthropogenic air pollution suppresses cloud-drop coalescence and early rainout during the growth of thunderstorms over land, allowing more water to be carried above the 0 C isotherm, where freezing yields additional latent heat, invigorating the storms--most dramatically evidenced by the shift in the midweek distribution of afternoon-storm heights--and producing large ice hydrometeors. The enhanced convection induces regional convergence, uplifting and an overall increase of rainfall. Compensating downward air motion suppresses convection over the adjacent ocean areas. Pre-TRMM-era data suggest that the weekly cycle only became strong enough to be detectable beginning in the 1980's. Rain-gauge data also suggest that a weekly cycle may have been detectable in the 1940's, but with peak rainfall on Sunday or Monday, possibly explained by the difference in composition of aerosol pollution at that time. This "weekend effect" may thus offer climate researchers an opportunity to study the regional climate-scale impact of aerosols on storm development and monsoon-like circulation.

Bell, Thomas L.↗
NASA NTRS2008

Current Sounding Capability From Satellite Meteorological Observation With Ultraspectral Infrared Instruments

Ultraspectral resolution infrared spectral radiance obtained from near nadir observations provide atmospheric, surface, and cloud property information. The intent of the measurement of tropospheric thermodynamic state and trace abundances is the initialization of climate models and the monitoring of air quality. The NPOESS Airborne Sounder Testbed-Interferometer (NAST-I), designed to support the development of future satellite temperature and moisture sounders, aboard high altitude aircraft has been collecting data throughout many field campaigns. An advanced retrieval algorithm developed with NAST-I is now applied to satellite data collected with the Atmospheric InfraRed Sounder (AIRS) on the Aqua satellite launched on 4 May 2002 and the Infrared Atmospheric Sounding Interferometer (IASI) on the MetOp satellite launched on October 19, 2006. These instruments possess an ultra-spectral resolution, for example, both IASI and NAST-I have ~0.25 cm-1 and a spectral coverage from 645 to 2760 cm-1. The retrieval algorithm with a fast radiative transfer model, including cloud effects, is used for atmospheric profile and cloud parameter retrieval. The physical inversion scheme has been developed, dealing with cloudy as well as cloud-free radiance observed with ultraspectral infrared sounders, to simultaneously retrieve surface, atmospheric thermodynamic, and cloud microphysical parameters. A fast radiative transfer model, which applies to the clouded atmosphere, is used for atmospheric profile and cloud parameter retrieval. A one-dimensional (1-d) variational multi-variable inversion solution is used to improve an iterative background state defined by an eigenvector-regression-retrieval. The solution is iterated in order to account for non-linearity in the 1-d variational solution. It is shown that relatively accurate temperature and moisture retrievals can be achieved below optically thin clouds. For optically thick clouds, accurate temperature and moisture profiles down to cloud top level are obtained. For both optically thin and thick cloud situations, the cloud top height can be retrieved with relatively high accuracy (i.e., error less than 1 km). Retrievals of atmospheric soundings, surface properties, and cloud microphysical properties with the AIRS and IASI observations are obtained and presented. These retrievals are further inter-compared with those obtained from airborne FTS system, such as the NPOESS Airborne Sounder Testbed? Interferometer (NAST I), dedicated dropsondes, radiosondes, and ground based Raman Lidar. The capabilities of satellite ultra-spectral sounder such as the AIRS and IASI are investigated. These advanced satellite ultraspectral infrared instruments are now playing an important role in satellite meteorological observation for numerical weather prediction.

Zhou, Daniel K.↗
NASA NTRS2010

Direct Retrieval of Sulfur Dioxide Amount and Altitude from Spaceborne Hyperspectral UV Measurements: Theory and Application

We describe the physical processes by which a vertically localized absorber perturbs the top-of-atmosphere solar backscattered ultraviolet (UV) radiance. The distinct spectral responses to perturbations of an absorber in its column amount and layer altitude provide the basis for a practical satellite retrieval technique, the Extended Iterative Spectral Fitting (EISF) algorithm, for the simultaneous retrieval of these quantities of a SO2 plume. In addition, the EISF retrieval provides an improved UV aerosol index for quantifying the spectral contrast of apparent scene reflectance at the bottom of atmosphere bounded by the surface and/or cloud; hence it can be used for detection of the presence or absence of UV absorbing aerosols. We study the performance and characterize the uncertainties of the EISF algorithm using synthetic backscattered UV radiances, retrievals from which can be compared with those used in the simulation. Our findings indicate that the presence of aerosols (both absorbing and nonabsorbing) does not cause large errors in EISF retrievals under most observing conditions when they are located below the SO2 plume. The EISF retrievals assuming a homogeneous field of view can provide accurate column amounts for inhomogeneous scenes, but they always underestimate the plume altitudes. The EISF algorithm reduces systematic errors present in existing linear retrieval algorithms that use prescribed SO2 plume heights. Applying the EISF algorithm to Ozone Monitoring Instrument satellite observations of the recent Kasatochi volcanic eruption, we demonstrate the successful retrieval of effective plume altitude of volcanic SO2, and we also show the improvement in accuracy in the corresponding SO2 columns.

Yang, Kau↗
NASA NTRS2008

High Vertically Resolved Atmospheric and Surface/Cloud Parameters Retrieved with Infrared Atmospheric Sounding Interferometer (IASI)

The Joint Airborne IASI Validation Experiment (JAIVEx) was conducted during April 2007 mainly for validation of the IASI on the MetOp satellite. IASI possesses an ultra-spectral resolution of 0.25/cm and a spectral coverage from 645 to 2760/cm. Ultra-spectral resolution infrared spectral radiance obtained from near nadir observations provide atmospheric, surface, and cloud property information. An advanced retrieval algorithm with a fast radiative transfer model, including cloud effects, is used for atmospheric profile and cloud parameter retrieval. This physical inversion scheme has been developed, dealing with cloudy as well as cloud-free radiance observed with ultraspectral infrared sounders, to simultaneously retrieve surface, atmospheric thermodynamic, and cloud microphysical parameters. A fast radiative transfer model, which applies to the cloud-free and/or clouded atmosphere, is used for atmospheric profile and cloud parameter retrieval. A one-dimensional (1-d) variational multi-variable inversion solution is used to improve an iterative background state defined by an eigenvector-regression-retrieval. The solution is iterated in order to account for non-linearity in the 1-d variational solution. It is shown that relatively accurate temperature and moisture retrievals are achieved below optically thin clouds. For optically thick clouds, accurate temperature and moisture profiles down to cloud top level are obtained. For both optically thin and thick cloud situations, the cloud top height can be retrieved with relatively high accuracy (i.e., error < 1 km). Preliminary retrievals of atmospheric soundings, surface properties, and cloud optical/microphysical properties with the IASI observations are obtained and presented. These retrievals will be further inter-compared with those obtained from airborne FTS system, such as the NPOESS Airborne Sounder Testbed - Interferometer (NAST-I), dedicated dropsondes, radiosondes, and ground based Raman Lidar. The capabilities of satellite ultra-spectral sounder such as the IASI are investigated indicating a high vertical structure of atmosphere is retrieved.

Zhou, Daniel K.↗
NASA NTRS1973

Use of Polarization Lidar for Investigation of Meteorological Formations

This paper presents the results of theoretical and experimental, investigations of depolarization characteristics of different meteorological formations. Experimental investigations are carried out with a monostatic lidar. The ruby laser radiation is polarized in a vertical plane. The radiation reflected is accepted by a lens system of 150 rom in diameter and a viewing angle of 12' and further it is divided by Wollaston prism into the components polarized orthogonally. In this case the principal plane of the prism is exposed parallel with the laser polarization plane. Investigations show the degree of radiation polarization, reflected from water clouds, to be changed within 1/0.7 (seldom up to 0.6) depending on their density. In most cases a signal reflected from the cloud leading edge is polarized completely. The time shift is observed between polarized and crosspolarized components of a Fignal, reflected from a cloud, depending on the density of a meteorological object. While penetrating into the cloud depth a degree of polarization decreases up to 0.8-0.7, and the character of this decrease is different for various types of clouds. For crystal clouds the shift between the components of the reflected signal is not observed and the magnitude of polarization degree amounts to 0.1/0.3 in comparison with water clouds. The polarization degree of radiation reflected by fog is not less than 0.6, and that in the rains of average intensity (about 5 mm/h) is always about 1. The authors have suggested an algorithm of numerical solution of nonstationary transfer equation in the vector form to forecast the influence of multiple scattering effects on polarization characteristics of the lidar light signal. The method of statistical simulation (Monte-Carlo technique) forms the basis of the algorithm. Numerical estimates obtained for a model of stratocumulus at lambda = 0.6943 microns under boundary conditions close to the conditions of natural experiment being discussed proved to be in a good agreement with the results of observation. Specifically, Fig. 1 shows the profiles of polarization (p) versus depth (L) of the following drop formations: fog (curve 1) with horizontal meteorological visibility of 4 km two stratocumulus at a height of 1100 m with the attenuation factors delta = 0.01m(exp -1) (curve 2) and delta = 0.05m(exp -1) (curve 3). Curve 3 shows the results of numerical estimates and the value of their statistical error.

Balin, Yu. S.↗
NASA NTRS2010

Model Effects on GLAS-Based Regional Estimates of Forest Biomass and Carbon

Ice, Cloud, and land Elevation Satellite (ICESat) / Geosciences Laser Altimeter System (GLAS) waveform data are used to estimate biomass and carbon on a 1.27 X 10(exp 6) square km study area in the Province of Quebec, Canada, below the tree line. The same input datasets and sampling design are used in conjunction with four different predictive models to estimate total aboveground dry forest biomass and forest carbon. The four models include non-stratified and stratified versions of a multiple linear model where either biomass or (biomass)(exp 0.5) serves as the dependent variable. The use of different models in Quebec introduces differences in Provincial dry biomass estimates of up to 0.35 G, with a range of 4.94 +/- 0.28 Gt to 5.29 +/-0.36 Gt. The differences among model estimates are statistically non-significant, however, and the results demonstrate the degree to which carbon estimates vary strictly as a function of the model used to estimate regional biomass. Results also indicate that GLAS measurements become problematic with respect to height and biomass retrievals in the boreal forest when biomass values fall below 20 t/ha and when GLAS 75th percentile heights fall below 7 m.

Nelson, Ross F.↗
NASA NTRS2000

Cloud and Aerosol Retrieval for the 2001 GLAS Satellite Lidar Mission

The Geoscience Laser Altimeter System (GLAS) is scheduled for launch in July of 2001 aboard the Ice, Cloud and Land Elevation Satellite (ICESAT). In addition to being a precision altimeter for mapping the height of the Earth's icesheets, GLAS will be an atmospheric lidar, sensitive enough to detect gaseous, aerosol, and cloud backscatter signals, at horizontal and vertical resolutions of 175 and 75m, respectively. GLAS will be the first lidar to produce temporally continuous atmospheric backscatter profiles with nearly global coverage (94-degree orbital inclination). With a projected operational lifetime of five years, GLAS will collect approximately six billion lidar return profiles. The large volume of data dictates that operational analysis algorithms, which need to keep pace with the data yield of the instrument, must be efficient. So, we need to evaluate the ability of operational algorithms to detect atmospheric constituents that affect global climate. We have to quantify, in a statistical manner, the accuracy and precision of GLAS cloud and aerosol observations. Our poster presentation will show the results of modeling studies that are designed to reveal the effectiveness and sensitivity of GLAS in detecting various atmospheric cloud and aerosol features. The studies consist of analyzing simulated lidar returns. Simulation cases are constructed either from idealized renditions of atmospheric cloud and aerosol layers or from data obtained by the NASA ER-2 Cloud Lidar System (CLS). The fabricated renditions permit quantitative evaluations of operational algorithms to retrieve cloud and aerosol parameters. The use of observational data permits the evaluations of performance for actual atmospheric conditions. The intended outcome of the presentation is that climatology community will be able to use the results of these studies to evaluate and quantify the impact of GLAS data upon atmospheric modeling efforts.

Hart, William D.↗
NASA NTRS1999

Modeled Impact of Cirrus Cloud Increases Along Aircraft Flight Paths

The potential impact of contrails and alterations in the lifetime of background cirrus due to subsonic airplane water and aerosol emissions has been investigated in a set of experiments using the GISS GCM connected to a q-flux ocean. Cirrus clouds at a height of 12-15km, with an optical thickness of 0.33, were input to the model "x" percentage of clear-sky occasions along subsonic aircraft flight paths, where x is varied from .05% to 6%. Two types of experiments were performed: one with the percentage cirrus cloud increase independent of flight density, as long as a certain minimum density was exceeded; the other with the percentage related to the density of fuel expenditure. The overall climate impact was similar with the two approaches, due to the feedbacks of the climate system. Fifty years were run for eight such experiments, with the following conclusions based on the stable results from years 30-50 for each. The experiments show that adding cirrus to the upper troposphere results in a stabilization of the atmosphere, which leads to some decrease in cloud cover at levels below the insertion altitude. Considering then the total effect on upper level cloud cover (above 5 km altitude), the equilibrium global mean temperature response shows that altering high level clouds by 1% changes the global mean temperature by 0.43C. The response is highly linear (linear correlation coefficient of 0.996) for high cloud cover changes between 0. 1% and 5%. The effect is amplified in the Northern Hemisphere, more so with greater cloud cover change. The temperature effect maximizes around 10 km (at greater than 40C warming with a 4.8% increase in upper level clouds), again more so with greater warming. The high cloud cover change shows the flight path influence most clearly with the smallest warming magnitudes; with greater warming, the model feedbacks introduce a strong tropical response. Similarly, the surface temperature response is dominated by the feedbacks, and shows little geographical relationship to the high cloud input. Considering whether these effects would be observable, changing upper level cloud cover by as little as 0.4% produces warming greater than 2 standard deviations in the Microwave Sounding Unit (MSU) channels 4, 2 and 2r, in flight path regions and in the subtropics. Despite the simplified nature of these experiments, the results emphasize the sensitivity of the modeled climate to high level cloud cover changes, and thus the potential ability of aircraft to influence climate by altering clouds in the upper troposphere.

Rind, David↗
NASA NTRSDate not supplied

Study the Vertical Structure and Transportation of the Extreme African Dust Storms using MERRA-2 Data

The Modern-Era Retrospective Analysis for Research and Application, Version 2 (MERRA-2) provides the first long-term global reanalysis to assimilate space-based observations of aerosols and represents their interactions with other physical processes in the climate system. In this study, we have examined the variations of atmospheric aerosols for the last 20 years since 2002 using the sub-daily MERRA-2 data and found seven extreme African dust storms that were transported westward across the Atlantic Ocean from the Sahara, crossing 70o-80oW. In particular, the well-known ‘Godzilla’ dust storm occurred in June 2020, and its dust cloud, with the highest-on-record aerosol optical depths, was transported toward the Americas. This storm greatly degraded air quality over large areas of the Caribbean Basin and the United States. The air quality index reached unhealthy levels for sensitive groups in more than ten U.S. states. In our study, the vertical structure and transport characteristics of the dust layers during this extreme dust event are investigated. The geopotential height and temperature were found anomalously low (around 600 hPa) over the Atlantic Ocean off northwest Africa before the June 2020 dust storm. This anomalous circulation pattern was persistent for more than 12 days starting from around May 30, breaking the regular easterly waves that transport dust from the Sahara Desert to the west. To verify the data quality, daily MERRA-2 PM2.5 data were calculated and compared with PM2.5 observations from the U.S. Environmental Protection Agency (EPA) at several selected ground stations in Florida. We provide this case study to illustrate how to effectively use various MERRA-2 data services at Goddard Earth Sciences Data and Information Services Center (GES DISC) where MERRA-2 data are archived, hoping to help data users in exploring their own topics of interest using data services at GES DISC.

data management, reanalysis↗
NASA NTRS2018

Constraining the Models' Response of Tropical Clouds to SST Forcings Using CALIPSO Observations

Here we present preliminary results from the analysis of the low cloud cover (LCC) and cloud radiative effect (CRE) interannual changes in response to sea surface temperature (SST) forcings in two GISS climate models, and 12 other climate models. We further classify them as a function of their ability to reproduce the vertical structure of the cloud response to SST change against 10 years of CALIPSO observations: “the constrained models, which match the observation constraint, and the unconstrained models”. The constrained models replicate the observed interannual LCC change particularly well (ΔLCC(sub con)=-3.49 ±1.01 %/K vs. ΔLCC(sub obs)=-3.59 ±0.28 %/K) as opposed to the unconstrained models, which largely underestimate it (ΔLCC(sub unc) = -1.32 ± 1.28 %/K). As a result, the amount of short-wave warming simulated by the constrained models (ΔCRE(sub con)=2.60 ±1.13 W/m2/K) is in better agreement with the observations (ΔCRE(sub obs)=3.05 ±0.28 W/m2/K) than the unconstrained models (ΔCRE(sub con)=0.87 ±2.63 W/m2/K). Depending on the type of low cloud, the observed relationship between cloud/radiation and surface temperature varies. Over the stratocumulus regions, increasing SSTs generate higher cloud top height along with a large decrease of the cloud fraction below as opposed to a slight decrease of the cloud fraction at each level over the trade cumulus regions. Our results suggest that the models must generate sustainable stratocumulus decks and moist processes in the planetary boundary layer to reproduce these observed features. Future work will focus on defining a method to objectively discriminate these cloud types that can be applied consistently in both the observations and the models.

Cesana, Gregory↗
NASA NTRS1994

Using FU Orionis outbursts to constrain self-regulated protostellar disk models

One-dimensional, convective, vertical structure models and one dimensional time-dependent, radial diffusion models are combined to create a self-consistent picture in which FU Orionis outbursts occur in young stellar objects (YSOs) as the result of a large-scale, self-regulated, thermal ionization instability in the surrounding protostellar accretion disk. Although active accretion disks have long been postulated to be ubiqitous among low-mass YSOs, few constraints have until now been imposed on physical conditions in these disks. By fitting the results of time-dependent disk models to observed timescales of FU Orionis events, we estimate the magnitude of the effective viscous stress in the inner disk (r approximately less than 1 AU) to be, in accordance with an ad hoc 'alpha' prescription, the product of the local sound speed, pressure scale height, and an efficiency factor alpha of 10(exp -4) where hydrogen is neutral and 10(exp 3) where hydrogen is ionized. We hypothesize that all YSOs receive infall onto their outer disks which is steady (or slowly declining with time) and that FU Orionis outbursts are self-regulated, disk outbursts which occur only in systems which transport matter inward at a rate sufficiently high to cause hydrogen to be ionized in the inner disk. We estimate a critical mass flux of dm(sub crit)/dt = 5 x 10(exp 7) solar mass/yr independent of the magnitude of alpha for systems with one solar mass, three solar radius central objects. Infall accretion rates in the range of dm(sub in)/dt = 1-10) x 10(exp -6) solar mass/yr produce observed FU Orionis timescales consistent with estimates of spherical molecular cloud core collapse rates. Modeled ionization fronts are typically initiated near the inner edge of the disk and propogate out to a distance of several tens of stellar radii. Beyond this region, the disk transports mass steadily inward at the supplied constant infall rate. Mass flowing through the innermost disk annulus is equal to dm(sub in)/dt only in a time-averaged sense and is regulated by the ionization of hydrogen in the inner disk such that long intervals (approximately 1000 yr) of low-mass flux: (1-30) x 10(exp -8) solar mass/yr are punctuated by short intervals (approximately 100 yr) of high-mass flux: (1-30) x 10(exp -5) solar mass/yr. Timescales and mass fluxes derived for quiescent and outburst stages are consistent with estimates from observations of T Tauri and FU Orionis systems, respectively.

Bell, K. R.↗
NASA NTRS1994

Simulating Local and Intercontinental Pollutant Effects of Biomass Burning: Integration of Several Remotely Sensed Datasets

Burning to clear land for crops and to destroy pests is an integral and largely unavoidable part of tropical agriculture. It is easy to note but difficult to quantify using remote sensing. This report describes our efforts to integrate remotely sensed data into our computer model of tropical chemical trace-gas emissions, weather, and reaction chemistry (using the MM5 mesoscale model and our own Global-Regional Atmospheric Chemistry Simulator). The effects of burning over the continents of Africa and South America have been noticed in observations from several satellites. Smoke plumes hundreds of kilometers long may be seen individually, or may merge into a large smoke pall over thousands of kilometers of these continents. These features are related to intense pollution in the much more confined regions with heavy burning. These emissions also translocate nitrogen thousands of kilometers in the tropical ecosystems, with large fixed-nitrogen losses balanced partially by locally intense fertilization downwind, where nitric acid is rained out. At a much larger scale, various satellite measurements have indicated the escape of carbon monoxide and ozone into large filaments which extend across the Tropical and Southern Atlantic Ocean. Our work relates the source emissions, estimated in part from remote sensing, in part from conventional surface reports, to the concentrations of these gases over these intercontinental regions. We will mention work in progress to use meteorological satellite data (AVHRR, GOES, and Meteosat) to estimate the surface temperature and extent and height of clouds, and explain why these uses are so important in our computer simulations of global biogeochemistry. We will compare our simulations and interpretation of remote observations to the international cooperation involving Brazil, South Africa, and the USA in the TRACE-A (Transport and Atmospheric Chemistry near the Equator - Atlantic) and SAFARI (Southern Africa Fire Atmosphere Research Initiative) and remote-sensing /aircraft/ecosystem observational campaigns.

Chatfield, Robert B.↗
NASA NTRS1980

Smoke and dust particles of meteoric origin in the mesosphere and stratosphere

A height profile of ablated mass from meteors is calculated, assuming an incoming mass of 10 to the -16th g/sq cm/s (44 metric tons per day) and the velocity distribution of Southworth and Sekanina, which has a mean of 14.5 km/s. The profile peaks at 84 km. The fluxes of micrometeorites and residual meteoroids are also calculated. The coagulation of the evaporated silicates into 'smoke' particles is then followed by means of a model adapted from a previous study of the stratospheric sulfate layer. Numerous sensitivity tests are made. Features of the results are a sharp cutoff of the particle distribution above 90 km, and a surface area close to 10 to the -9th sq cm/cu cm all the way from 30 to 85 km. Some confirmation is obtained from balloon studies of condensation nuclei, although the various measurements differ greatly. The optical scattering and extinction are shown to be undetectable. Several potential applications are suggested: nucleation of sulfate particles and noctilucent clouds, scavenging of metallic ions and atoms, and perhaps other aeronomical effects. The latter are limited to processes that can be influenced by a collision time of the order of a day.

Hunten, D. M.↗
NASA NTRS2014

Remote Sensing of Cloud Top Height from SEVIRI: Analysis of Eleven Current Retrieval Algorithms

The role of clouds remains the largest uncertainty in climate projections. They influence solar and thermal radiative transfer and the earth's water cycle. Therefore, there is an urgent need for accurate cloud observations to validate climate models and to monitor climate change. Passive satellite imagers measuring radiation at visible to thermal infrared (IR) wavelengths provide a wealth of information on cloud properties. Among others, the cloud top height (CTH) - a crucial parameter to estimate the thermal cloud radiative forcing - can be retrieved. In this paper we investigate the skill of ten current retrieval algorithms to estimate the CTH using observations from the Spinning Enhanced Visible and InfraRed Imager (SEVIRI) onboard Meteosat Second Generation (MSG). In the first part we compare ten SEVIRI cloud top pressure (CTP) data sets with each other. The SEVIRI algorithms catch the latitudinal variation of the CTP in a similar way. The agreement is better in the extratropics than in the tropics. In the tropics multi-layer clouds and thin cirrus layers complicate the CTP retrieval, whereas a good agreement among the algorithms is found for trade wind cumulus, marine stratocumulus and the optically thick cores of the deep convective system. In the second part of the paper the SEVIRI retrievals are compared to CTH observations from the Cloud-Aerosol LIdar with Orthogonal Polarization (CALIOP) and Cloud Profiling Radar (CPR) instruments. It is important to note that the different measurement techniques cause differences in the retrieved CTH data. SEVIRI measures a radiatively effective CTH, while the CTH of the active instruments is derived from the return time of the emitted radar or lidar signal. Therefore, some systematic differences are expected. On average the CTHs detected by the SEVIRI algorithms are 1.0 to 2.5 kilometers lower than CALIOP observations, and the correlation coefficients between the SEVIRI and the CALIOP data sets range between 0.77 and 0.90. The average CTHs derived by the SEVIRI algorithms are closer to the CPR measurements than to CALIOP measurements. The biases between SEVIRI and CPR retrievals range from −0.8 kilometers to 0.6 kilometers. The correlation coefficients of CPR and SEVIRI observations vary between 0.82 and 0.89. To discuss the origin of the CTH deviation, we investigate three cloud categories: optically thin and thick single layer as well as multi-layer clouds. For optically thick clouds the correlation coefficients between the SEVIRI and the reference data sets are usually above 0.95. For optically thin single layer clouds the correlation coefficients are still above 0.92. For this cloud category the SEVIRI algorithms yield CTHs that are lower than CALIOP and similar to CPR observations. Most challenging are the multi-layer clouds, where the correlation coefficients are for most algorithms between 0.6 and 0.8. Finally, we evaluate the performance of the SEVIRI retrievals for boundary layer clouds. While the CTH retrieval for this cloud type is relatively accurate, there are still considerable differences between the algorithms. These are related to the uncertainties and limited vertical resolution of the assumed temperature profiles in combination with the presence of temperature inversions, which lead to ambiguities in the CTH retrieval. Alternative approaches for the CTH retrieval of low clouds are discussed.

Hamann, U.↗
NASA NTRSDate not supplied

Cloud Condensation Nuclei in the Early Martian Atmosphere

Explanations for how early Mars supported warmer and wetter conditions 3.5 to 4 billion years ago have long been debated. A water cloud greenhouse has been proposed as a mechanism of warming early Mars, but modeling studies of these environments produce mixed results. Studies show that both H 2 O and CO 2 clouds are capable of influencing atmospheric and surface temperatures, but the amount of warming induced is very sensitive to the cloud physics assumptions made. Producing a strong water cloud greenhouse effect is dependent on forming clouds as high in the atmosphere as possible to maximize warming. However, the majority of studies of H 2 O and CO 2 clouds on early Mars assume that a constant number of seed nuclei are available at all altitudes for clouds to condense onto. Here we test the validity of this assumption in massive CO 2 atmospheres. Explaining how dust is lofted into the middle atmosphere to serve as seed nuclei for cloud formation is a challenge even for present day Mars. This problem may change in an early Mars environment where having a more massive atmosphere could result in differences in the general circulation, vertical transport, and settling time scales of dust. Here, we begin a first-ever study of the early Mars dust cycle and how it might couple to the water cycle. We present early Mars simulations in which dust is injected at the surface and can be transported throughout the atmosphere. We explore the resulting vertical and horizontal distributions of dust particles and their sizes with an emphasis on the maximum height of the dust. We aim to investigate what the distribution of cloud condensation nuclei may have been on early Mars and how this might impact cloud formation.

Kathryn Steakley↗
NASA NTRSDate not supplied

Simultaneous lidar profiling of water vapor, aerosol, and wind over the eastern Pacific and implications for observational challenges on clouds, circulation, and climate sensitivity

Moist convective processes and related circulations are key components of the Earth’s climate system. Improving our understanding of moisture and cloud processes over oceans is especially challenging due to observational limitations, but also important due to the large radiative effects of cloud over ocean as well as the ties to local and global-scale circulations. A unique dataset for addressing these topics was collected over 5 flights with the NASA HALO (water vapor DIAL and aerosol HSRL) and DAWN (Doppler wind) lidar systems onboard the NASA DC-8 aircraft during the spring 2019 ADM-Aeolus Cal/Val test flight campaign. High-resolution water vapor, aerosol/cloud, and wind profiles were simultaneously collected and complimented with in situ high-resolution dropsonde measurements of temperature, relative humidity, and wind profiles. Airborne lidar measurements of these key variables captured both large-scale spatial variability across different cloud and atmospheric conditions as well as finer features, providing insight into processes from large-scale circulations down to aerosol/cloud interactions. The 5 flights spanned the northeast Pacific and southwest U.S. from 6 N to 52 N and 112 W to 157 W and captured several features of interest including moist layers from the ascending region of the Hadley circulation, very dry layers above midlatitude marine stratocumulus and cloud-free planetary boundary layers, and cloud top height and spatial variability. High covariance of aerosol and water vapor in the free troposphere was also observed for the first time. Preliminary analysis of these data sets will be presented as they apply to clouds and circulations, supplemented by model reanalysis to inform how regional water vapor structure and large-scale motion may contribute to observed shallow cloud formations and other meteorological processes that underpin our current understanding of how these state variables couple to impact the Earth’s weather and climate systems. The potential of complementary measurements in future field campaigns will also be mentioned.

Brian James Carroll↗