Search NASA⌕ Search

SEARCH · Search NASA

Results for “Cray”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Numerical simulation of three dimensional transonic flows

The three-dimensional flow over a projectile has been computed using an implicit, approximately factored, partially flux-split algorithm. A simple composite grid scheme has been developed in which a single grid is partitioned into a series of smaller grids for applications which require an external large memory device such as the SSD of the CRAY X-MP/48, or multitasking. The accuracy and stability of the composite grid scheme has been tested by numerically simulating the flow over an ellipsoid at angle of attack and comparing the solution with a single grid solution. The flowfield over a projectile at M = 0.96 and 4 deg angle-of-attack has been computed using a fine grid, and compared with experiment.

Sahu, Jubaraj↗
NASA NTRS1987

A study of carbon monoxide distribution determinations for a global transport model

A system of programs which model the chemistry and transport of carbon monoxide and methane in the Earth's atmosphere on a global scale was installed onto the NASA-Langley central scientific computer network. This system, the GLOBAL system, consists of a user-friendly set of procedural files which allow for simplified pre-processing, execution, and post-processing for all program elements. The package includes procedures for obtaining the NMC meteorological data, calculating the vertical winds to satisfy mass conservation, determining the boundary layer, and executing the transport/chemical model for carbon monoxide. In addition, plotting, saving to tape, and reading from tape routines were developed. Final modifications to the subprograms for processing the input data for the transport/chemistry model have improved these data to more accurately reflect true atmospheric conditions. The transfer of the transport/chemistry model from the NCAR CRAY system to the NASA-Langley VPS-32 system was completed. The problems encountered during this process and their resolutions are discussed.

Peters, Leonard K.↗
NASA NTRS1987

Low thrust viscous nozzle flow fields prediction

An existing Navier-Stokes code (PARC2D) was used to compute the nozzle flow field. Grids were generated by the interactive grid generator codes TBGG and GENIE. All computations were made on the NASA/MSFC CRAY X-MP computer. Comparisons were made between the computations and MSFC in-house wall pressure measurements for CO2 flow through a conical nozzle having an area ratio of 40. Satisfactory agreements exist between the computations and measurements for different stagnation pressures of 29.4, 14.7, and 7.4 psia, at stagnation temperature of 1060 R. However, agreements did not match precisely near the nozzle exit. Several reasons for the lack of agreement are possible. The computational code assumes a constant gas gamma, whereas the gamma i.e. the specific heat ratio for CO2 varied from 1.22 in the plenum chamber to 1.38 at the nozzle exit. The computations also assumes adiabatic and no-slip walls. Both assumptions may not be correct. Finally, it is possible that condensation occurs during the nozzle expansion at the low stagnation pressure. The next phase of the work will incorporate variable gamma and slip wall boundary conditions in the computational code and develop a more accurate computer code.

Liaw, Goang-Shin↗
NASA NTRS1987

Analysis of internal flows relative to the space shuttle main engine

Cooperative efforts between the Lockheed-Huntsville Computational Mechanics Group and the NASA-MSFC Computational Fluid Dynamics staff has resulted in improved capabilities for numerically simulating incompressible flows generic to the Space Shuttle Main Engine (SSME). A well established and documented CFD code was obtained, modified, and applied to laminar and turbulent flows of the type occurring in the SSME Hot Gas Manifold. The INS3D code was installed on the NASA-MSFC CRAY-XMP computer system and is currently being used by NASA engineers. Studies to perform a transient analysis of the FPB were conducted. The COBRA/TRAC code is recommended for simulating the transient flow of oxygen into the LOX manifold. Property data for modifying the code to represent LOX/GOX flow was collected. The ALFA code was developed and recommended for representing the transient combustion in the preburner. These two codes will couple through the transient boundary conditions to simulate the startup and/or shutdown of the fuel preburner. A study, NAS8-37461, is currently being conducted to implement this modeling effort.

Source record↗
NASA NTRS1986

Analysis and performance prediction of scramjet inlets utilizing a three-dimensional Navier-Stokes code

A series of inlet analysis codes (2-D, axisymmetric, 3-D) were developed which can analyze complicated flow through complex inlet geometries in a reasonably efficient manner. The codes were verified and are being used extensively to analyze practical inlet geometries both at Langley as well as industries. Newly installed VPS 32 computer will allow more complex configurations to be analyzed. Scalar FORTRAN versions are available to increase transportability of the codes for use on other Scalar computers and on the Cray vector processing computer.

Kumar, Ajay↗
NASA NTRS1988

General Rotorcraft Aeromechanical Stability Program (GRASP) version 1.03: User's manual

The Rotorcraft Dynamics Division, Aeroflightdynamics Directorate, U.S. Army Aviation Research and Technology Activity has developed the General Rotorcraft Aeromechanical Stability Program (GRASP) to perform calculations that will assess the stability of rotorcraft in hovering flight and ground contact conditions. The program is designed to be state-of-the-art, hybrid, finite-element/multibody code that can be applied to all existing and future helicopter configurations. While GRASP was specifically designed to solve rotorcraft stability problems, its innovative structure and formulation allow for application to a wide range of structures. This manual describes the preparation of the input file required by Version 1.03 of GRASP, the procedures used to invoke GRASP on the NASA Ames Research Center CRAY X-MP 48 computer, and the interpretation of the output produced by GRASP. The parameters used by the input file are defined, and summaries of the input file and the job control language are included.

Hopkins, A. Stewart↗
NASA NTRS1987

Utilization of parallel processing in solving the inviscid form of the average-passage equation system for multistage turbomachinery

A procedure is outlined which utilizes parallel processing to solve the inviscid form of the average-passage equation system for multistage turbomachinery along with a description of its implementation in a FORTRAN computer code, MSTAGE. A scheme to reduce the central memory requirements of the program is also detailed. Both the multitasking and I/O routines referred to are specific to the Cray X-MP line of computers and its associated SSD (Solid-State Disk). Results are presented for a simulation of a two-stage rocket engine fuel pump turbine.

Mulac, Richard A.↗
NASA NTRS1988

Life assessment of combustor liner using unified constitutive models

Hot section components of gas turbine engines are subject to severe thermomechanical loads during each mission cycle. Inelastic deformation can be induced in localized regions leading to eventual fatigue cracking. Assessment of durability requires reasonably accurate calculation of the structural response at the critical location for crack initiation. In recent years nonlinear finite element computer codes have become available for calculating inelastic structural response under cyclic loading. NASA-Lewis sponsored the development of unified constitutive material models and their implementation in nonlinear finite element computer codes for the structural analysis of hot section components. These unified models were evaluated with regard to their effect on the life prediction of a hot section component. The component considered was a gas turbine engine combustor liner. A typical engine mission cycle was used for the thermal and structural analyses. The analyses were performed on a CRAY computer using the MARC finite element code. The results were compared with laboratory test results, in terms of crack initiation lives.

Tong, M. T.↗
NASA NTRS1986

Full potential methods for analysis/design of complex aerospace configurations

The steady form of the full potential equation, in conservative form, is employed to analyze and design a wide variety of complex aerodynamic shapes. The nonlinear method is based on the theory of characteristic signal propagation coupled with novel flux biasing concepts and body-fitted mapping procedures. The resulting codes are vectorized for the CRAY XMP and the VPS-32 supercomputers. Use of the full potential nonlinear theory is demonstrated for a single-point supersonic wing design and a multipoint design for transonic maneuver/supersonic cruise/maneuver conditions. Achievement of high aerodynamic efficiency through numerical design is verified by wind tunnel tests. Other studies reported include analyses of a canard/wing/nacelle fighter geometry.

Shankar, Vijaya↗
NASA NTRS1987

Preliminary 2-D shell analysis of the space shuttle solid rocket boosters

A two-dimensional shell model of an entire solid rocket booster (SRB) has been developed using the STAGSC-1 computer code and executed on the Ames CRAY computer. The purpose of these analyses is to calculate the overall deflection and stress distributions for the SRB when subjected to mechanical loads corresponding to critical times during the launch sequence. The mechanical loading conditions for the full SRB arise from the external tank (ET) attachment points, the solid rocket motor (SRM) pressure load, and the SRB hold down posts. The ET strut loads vary with time after the Space Shuttle main engine (SSME) ignition. The SRM internal pressure varies axially by approximately 100 psi. Static analyses of the full SRB are performed using a snapshot picture of the loads. The field and factory joints are modeled by using equivalent stiffness joints instead of detailed models of the joint. As such, local joint behavior cannot be obtained from this global model.

Knight, Norman F., Jr.↗
NASA NTRS1987

Real-time operational planning for the U.S. air traffic system

This paper describes an integrated planning model for the U.S. air traffic system. The approach incorporates the dual objectives of monitoring collision risk while minimizing transportation costs. Specialized solution algorithms exploit the underlying structure of the model - especially for large-scale examples. The proposed formulation is tested with real-world data for the Indianapolis control sector. Additional experiments with a CRAY X-MP/24 supercomputer show that a full-scale model can be solved under real time conditions. Despite these advances, additional work is required in developing a practical system. Suggestions are made for combining advances in computer graphics and mathematical modeling.

Mulvey, John M.↗
NASA NTRS1987

Multitasking for flows about multiple body configurations using the chimera grid scheme

The multitasking of a finite-difference scheme using multiple overset meshes is described. In this chimera, or multiple overset mesh approach, a multiple body configuration is mapped using a major grid about the main component of the configuration, with minor overset meshes used to map each additional component. This type of code is well suited to multitasking. Both steady and unsteady two dimensional computations are run on parallel processors on a CRAY-X/MP 48, usually with one mesh per processor. Flow field results are compared with single processor results to demonstrate the feasibility of running multiple mesh codes on parallel processors and to show the increase in efficiency.

Dougherty, F. C.↗
NASA NTRS1987

Numerical simulation of self-sustained and forced oscillations in jet shear layers

Excitation of axisymmetric jet shear layers has been investigated by solving the time-dependent compressible Navier-Stokes equations. MacCormack's explicit finite difference scheme is used in performing the computations on a CRAY X-MP computer. This work examines the influence of various means of excitation of the shear layer, to produce large scale vortex structures in such a manner that the mixing between two flows will be enhanced or diminished. While successful pressure excitation has been achieved in previous studies only limited success with temperature excitation at the inflow boundary has been accomplished. The current study focuses on the use of temperature excitation through the boundary layer immediately inside the jet lip. In order to achieve the required resolution significant grid refinement is necessary. The results of the computation with and without temperature excitation are analyzed and compared with results obtained using pressure excitation. The influence of amplitude and frequency on specific flow characteristics are also examined. The excitation frequency for both the temperature and pressure corresponds to a Strouhal number of .45 and the inflow jet Mach number is approximately .3.

Scott, J. N.↗
NASA NTRS1988

Numerical results on the transcendence of constants involving pi, e, and Euler's constant

The existence of simple polynomial equations (integer relations) for the constants e/pi, e + pi, log pi, gamma (Euler's constant), e exp gamma, gamma/e, gamma/pi, and log gamma is investigated by means of numerical computations. The recursive form of the Ferguson-Fourcade algorithm (Ferguson and Fourcade, 1979; Ferguson, 1986 and 1987) is implemented on the Cray-2 supercomputer at NASA Ames, applying multiprecision techniques similar to those described by Bailey (1988) except that FFTs are used instead of dual-prime-modulus transforms for multiplication. It is shown that none of the constants has an integer relation of degree eight or less with coefficients of Euclidean norm 10 to the 9th or less.

Bailey, David H.↗
NASA NTRS1988

The computation of pi to 29,360,000 decimal digits using Borweins' quartically convergent algorithm

The quartically convergent numerical algorithm developed by Borwein and Borwein (1987) for 1/pi is implemented via a prime-modulus-transform multiprecision technique on the NASA Ames Cray-2 supercomputer to compute the first 2.936 x 10 to the 7th digits of the decimal expansion of pi. The history of pi computations is briefly recalled; the most recent algorithms are characterized; the implementation procedures are described; and samples of the output listing are presented. Statistical analyses show that the present decimal expansion is completely random, with only acceptable numbers of long repeating strings and single-digit runs.

Bailey, David H.↗
NASA NTRS1988

Close to real life

NASA's Numerical Aerodynamic Simulation (NAS) facility for CFD modeling of highly complex aerodynamic flows employs as its basic hardware two Cray-2s, an ETA-10 Model Q, an Amdahl 5880 mainframe computer that furnishes both support processing and access to 300 Gbytes of disk storage, several minicomputers and superminicomputers, and a Thinking Machines 16,000-device 'connection machine' processor. NAS, which was the first supercomputer facility to standardize operating-system and communication software on all processors, has done important Space Shuttle aerodynamics simulations and will be critical to the configurational refinement of the National Aerospace Plane and its intergrated powerplant, which will involve complex, high temperature reactive gasdynamic computations.

Peterson, Victor L.↗
NASA NTRS1987

Time-partitioning simulation models for calculation of parallel computers

A technique allowing time-staggered solution of partial differential equations is presented in this report. Using this technique, called time-partitioning, simulation execution speedup is proportional to the number of processors used because all processors operate simultaneously, with each updating of the solution grid at a different time point. The technique is limited by neither the number of processors available nor by the dimension of the solution grid. Time-partitioning was used to obtain the flow pattern through a cascade of airfoils, modeled by the Euler partial differential equations. An execution speedup factor of 1.77 was achieved using a two processor Cray X-MP/24 computer.

Milner, Edward J.↗