Search NASA⌕ Search

SEARCH · Search NASA

Results for “DESTRUCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Testing Destruction of Clay Minerals By Silica-Poor Brines in Gale Crater, Mars Using Laboratory and Field Experiments

The Mars Science Laboratory (MSL) Curiosity rover landed in Gale crater to investigate the cause for mineralogical changes seen from orbit, including the clay-sulfate mineral transition observed on its central mound, Aeolis Mons. The lower strata show spectral signatures of clay minerals, hematite, and hydrated Mg sulfates, and the upper strata are dominated by hydrated Mg sulfate signatures. This significant transition has been observed in other locations on Mars, and therefore processes related to the clay mineral-sulfate transition are likely important broadly across Mars. The bulk mineralogy of ~3.7 Ga sedimentary rocks in Gale crater is a product of variations in sediment sources and depositional processes, with overprinting by episodes of early and late diagenetic alteration. Sedimentary analyses of the smectite clay minerals observed in the Glen Torridon (GT) region of Mount Sharp suggest formation in a lacustrine aqueous environment. Examination of the Vera Rubin ridge (VRR) strata indicate that it was formed at the same time as GT and later altered by extensive diagenesis. Recent work suggests that the observed mineral transition from smectites and talc-serpentinites in GT to iron oxides and oxyhydroxides and VRR may have resulted from extensive diagenetic alteration by density driven, silica-poor brines sourced from the overlying sulfur-bearing unit on Mount Sharp. This process of alteration by silica-poor brines is observed in limited locations on Earth. We are therefore working to demonstrate the impacts of silica poor brines on clay mineral alteration in laboratory column and terrestrial analog burial experiments. Column experiments allow the investigation of dissolution and precipitation under conditions that represent a closer analog to natural environments, while burial experiments allow examination of weathering reactions of a known starting material after a specific period of time in a natural field environment. Both methods are valuable for interpreting the water-rock interactions between clay minerals and brines. In preparation for these longer-term column and burial experiments, we are performing preliminary batch dissolution experiments on materials relevant to Glen Torridon: nontronite and serpentinite. We are using magnesium sulfate brine solutions relevant to those proposed on Mars. The results of this study can provide constraints on the characteristics of the diagenetic fluids that formed the altered minerals in Gale crater. They can also provide insights into the role of brine density-driven diagenesis in past aqueous environments on Mars, which have been proposed to be widespread.

J E Valdueza↗
NASA NTRS2019

The Non-Destructive Separation of Diverse Astrobiologically Relevant Organic Molecules By Customizable Capillary Zone Electrophoresis and Monolithic Capillary Electrochromatography

The in situ detection of organic molecules in space is key to understanding the variety and the distribution of the building blocks of life, and possibly the detection of extraterrestrial life itself. Gas chromatography mass spectrometry (GC-MS) has been the most sensitive analytical instrument for organic analyses in flight, and was used on missions from NASA’s Viking, Phoenix, Curiosity missions to ESA’s Rosetta space probe. While pyrolysis GC-MS revealed the first organics on Mars, this step alters or degrades certain fragile molecules that are excellent biosignatures including polypeptides, oligonucleotides and polysaccharides, rendering the intact precursors undetectable. We have identified a solution tailored to the detection of biopolymers and other biomarkers by the use of liquid-based capillary electrophoresis and electrochromatography. In this study, we show that a capillary electrochromatography (CEC) approach using monolithic stationary phases with tailor-made surface chemistry can separate and identify various polycyclic aromatic hydrocarbons (PAHs), nucleobases and aromatic acids that could be formed under astrophysically relevant conditions. In order to simulate flyby organic sample capture, we conducted hypervelocity impact experiments which consisted of accelerating peptide-soaked montmorillonite particles to a speed of 5.6 km/sec, and capturing them in an amorphous silica aerogel of 10 and 30 mg/cc bulk density. Bulk peptide extraction from aerogel followed by capillary zone electrophoresis led to the detection of only two stereoisomeric peptide peaks. The recovery rates of each step of the extraction procedure after the hypervelocity impact suggest that major peptide loss occurred during the impact. Our study provides initial exploration of feasibility of this approach for capturing intact peptides, and subsequently detecting candidate biomolecules during flight missions that would be missed by GC-MS alone. As the monolith-based electrochromatography technology could be customized to detect specific classes of compounds as well as miniaturized, these results demonstrate the potential of the instrumentation for future astrobiology-related spaceflight missions.

Flyby sample return↗
NASA NTRSDate not supplied

NASA's Office Safety Mission Assurance Efforts to Improve Non-destructive Evaluation Methods for Additive Manufacturing and In-Space Inspection

National Aeronautics and Space Administration (NASA) continues to push the boundary of manned flight. Current mission profiles include flights to the Moon and Mars. Many of these missions require advance manufacturing and planned off planet resource utilization. As NASA continues to develop highly advance materials and manufacturing techniques to meet these mission profiles, inspection of these increasingly complex parts has had to evolve as well. Additive manufacturing is coming to the forefront as a primary manufacturing technique but offers unique challenges when inspection and certification are required. NASA has been working diligently to be a leader in developing and utilizing inspection techniques capable of inspecting these highly advanced parts. Additionally additive manufacturing techniques can also be used to build parts in space and provides a vehicle for in-situ resource utilization for off world missions. As NASA and its commercial crew partners move forward, inspection techniques will need to continue to advance to ensure safe manned space flight. In this talk NASA will highlight many of the advanced nondestructive evaluation efforts going on across the agency, as well as providing highlights for points of infusion for helping NASA meet its future mission goals.

NDE↗
NASA NTRS1993

Second law analysis of a conventional steam power plant

A numerical investigation of exergy destroyed by operation of a conventional steam power plant is computed via an exergy cascade. An order of magnitude analysis shows that exergy destruction is dominated by combustion and heat transfer across temperature differences inside the boiler, and conversion of energy entering the turbine/generator sets from thermal to electrical. Combustion and heat transfer inside the boiler accounts for 53.83 percent of the total exergy destruction. Converting thermal energy into electrical energy is responsible for 41.34 percent of the total exergy destruction. Heat transfer across the condenser accounts for 2.89 percent of the total exergy destruction. Fluid flow with friction is responsible for 0.50 percent of the total exergy destruction. The boiler feed pump turbine accounts for 0.25 percent of the total exergy destruction. Fluid flow mixing is responsible for 0.23 percent of the total exergy destruction. Other equipment including gland steam condenser, drain cooler, deaerator and heat exchangers are, in the aggregate, responsible for less than one percent of the total exergy destruction. An energy analysis is also given for comparison of exergy cascade to energy cascade. Efficiencies based on both the first law and second law of thermodynamics are calculated for a number of components and for the plant. The results show that high first law efficiency does not mean high second law efficiency. Therefore, the second law analysis has been proven to be a more powerful tool in pinpointing real losses. The procedure used to determine total exergy destruction and second law efficiency can be used in a conceptual design and parametric study to evaluate the performance of other steam power plants and other thermal systems.

Liu, Geng↗
NASA NTRS1999

Sources and sinks for ammonia and nitrite on the early Earth and the reaction of nitrite with ammonia

An analysis of sources and sinks for ammonia and nitrite on the early Earth was conducted. Rates of formation and destruction, and steady state concentrations of both species were determined by steady state kinetics. The importance of the reaction of nitrite with ammonia on the feasibility of ammonia formation from nitrite was evaluated. The analysis considered conditions such as temperature, ferrous iron concentration, and pH. For sinks we considered the reduction of nitrite to ammonia, reaction between nitrite and ammonia, photochemical destruction of both species, and destruction at hydrothermal vents. Under most environmental conditions, the primary sink for nitrite is reduction to ammonia. The reaction between ammonia and nitrite is not an important sink for either nitrite or ammonia. Destruction at hydrothermal vents is important at acidic pH's and at low ferrous iron concentrations. Photochemical destruction, even in a worst case scenario, is unimportant under many conditions except possibly under acidic, low iron concentration, or low temperature conditions. The primary sink for ammonia is photochemical destruction in the atmosphere. Under acidic conditions, more of the ammonia is tied up as ammonium (reducing its vapor pressure and keeping it in solution) and hydrothermal destruction becomes more important.

NASA Discipline Exobiology↗
NASA NTRS2019

Achieving Improved Reliability with Failure Analysis

Reliability is the ability of a product to properly function, within specified performance limits, for a specified period of time, under the life cycle application conditions. Failure analysis is a vital tool in the effort to ensure reliability of electronic products and systems throughout their product lifecycle. Today, organizations involved in activities within the electronics supply chain are facing new challenges, not just from complex assembly styles, harsher lifecycle environments, and sophisticated supply chains, but also from customers who are demanding a quicker turn-around. Unfortunately, root cause failure analysis is often performed incompletely, leading to a poor understanding of failure mechanisms and causes and, customer dissatisfaction due to recurring failures. The PDC (Professional Development Course) starts with an introduction to reliability concepts, physics of failure and an overview of failure mechanisms that affect PCBs (Printed Circuit Boards), PCBAs (Printed Circuit Board Assembly) and components. The PDC then dives into root cause hypothesizing techniques (Pareto, FMEA (Failure Modes and Effects Analysis), fishbone (Cause-And-Effect Diagram), FTA (Fault Tree Analysis)), non-destructive and destructive analysis and, materials characterization will be discussed. Numerous failure analysis case studies will be used to illustrate the techniques and analysis principles to arrive at the root cause(s) of field failures on printed circuit boards, active components, and assemblies. What Attendees will Learn: Topics include: Overview of Reliability Concepts Failure mechanisms of electronic products Root cause analysis Failure analysis techniques -Non-destructive techniques (optical, CSAM (Confocal Scanning Electron Microscopy) etc.) -Destructive analysis (DPA (Destructive Physical Analysis), Decap (Decapsulation), FIB (Focused Ion Beam) etc.) -Materials characterization (XRF (X-Ray Fluorescence) , EDS (Error Detection Sequential), TMA/DSC (Thermal Mechanical Analysis/Differential Scanning Calorimetry) etc.)

PCB quality↗
NASA NTRS2018

Achieving Improved Reliability with Failure Analysis

Reliability is the ability of a product to properly function, within specified performance limits, for a specified period of time, under the life cycle application conditions. Failure analysis is a vital tool in the effort to ensure reliability of electronic products and systems throughout their product lifecycle. Today, organizations involved in activities within the electronics supply chain are facing new challenges, not just from complex assembly styles, harsher lifecycle environments, and sophisticated supply chains, but also from customers who are demanding a quicker turn-around. Unfortunately, root cause failure analysis is often performed incompletely, leading to a poor understanding of failure mechanisms and causes and, customer dissatisfaction due to recurring failures. The PDC starts with an introduction to reliability concepts, physics of failure and an overview of failure mechanisms that affect PCBs, PCBAs and components. The PDC then dives into root cause hypothesizing techniques (Pareto, FMEA, fishbone, FTA), non-destructive and destructive analysis and, materials characterization will be discussed. Numerous failure analysis case studies will be used to illustrate the techniques and analysis principles to arrive at the root cause(s) of field failures on printed circuit boards, active components, and assemblies. What Will You Learn: Topics include: Overview of Reliability Concepts Failure mechanisms of electronic products Root cause analysis Failure analysis techniques -Non-destructive techniques (optical, CSAM etc.) -Destructive analysis (DPA, Decap, FIB etc.) -Materials characterization (XRF, EDS, TMA/DSC etc.) Who Will Benefit: Reliability engineers, failure analysis engineers, engineering managers, design engineers, component engineers, quality assurance functions and, personnel involved with reliability activities within their company.

non-destructive techniques↗
NASA NTRS1980

Molecule formation and infrared emission in fast interstellar shocks. II - Dissociation speeds for interstellar shock waves

The postshock destruction of molecules is examined, including the processes of (1) collisions with neutral hydrogen atoms and molecules, (2) electronic collisions, and (3) neutral chemical reactions with atoms, particularly atomic hydrogen. By using conservative estimates of collisional dissociation rates from individual vibrational states, it is found that process (1) leads to the destruction of molecular hydrogen behind shocks with speeds equal to or greater than 25 km/s if the preshock molecular gas has hydrogen nucleus densities of equal to or greater than 10 to the 4th/cu cm. At lower densities (100 per cu cm), destruction occurs for shock speeds equal to or greater than 50 km/s and process (2) dominates. Dissociation of molecules such as CO, H2O, and O2 follows the destruction of H2, as the resultant hydrogen atoms chemically dissociate the metal atoms from their bonds (process 3) in the hot postshock gas. These results demonstrate that many of the observed high-speed interstellar molecules, if shock accelerated, must have dissociated and reformed in the postshock gas.

Hollenbach, D.↗
NASA NTRS1990

Global atmospheric chemistry of CFC-123

The compound 1,1-dichloro--2,2,2-trifluoroethane (CFC-123) has been proposed as an industrial substitute for trichlorofluoromethane (CFC-11). The chemical destruction rates of CFC-123 by various processes is calculated here using a three-dimensional global model of the atmosphere, and it is confirmed that the chief sink of CFC-123 is destruction by OH radicals below 12 km, accounting for 88 percent of its loss. The calculated destruction rate is greatest in the equatorial region below 2 km. The calculated steady-state lifetime of CFC-123 is 1.5 years, much shorter than that of CFC-11, the destruction of which is largely confined to the stratosphere. For equal rates of CFC-123 and CFC-11 emission to the atmosphere, the molar content in the atmosphere and the injection rate of chlorine into the stratosphere are, respectively, 48 and 14 times greater for CFC-11 than for CFC-123 in steady state.

Prinn, Ronald G.↗
NASA NTRS1992

Would a Galactic bar destroy the globular cluster system?

Five different dynamical Galaxy models are presented for the Galactic potential which satisfy the observed rotation curve but contain a central bar so that the 3-kpc nonintersecting streamlines have a radial velocity of 50 km/s when viewed at 45 deg to the bar axis. The effect of the central bars on the destruction rates of globular clusters in the Galaxy is investigated. The method of Aguilar et al. (1988) is applied to these barred Galaxy models. The unknown tangential velocity components of each observed cluster are drawn randomly from an assumed distribution function. The cluster's orbit is integrated, and the bulge shocking rate is calculated. The median destruction rate of the cluster is computed by sampling a large number of such orbits. The addition of the rotating bar does not strongly affect the destruction rates of globular clusters. There is a small increase in the destruction rate for those clusters within about 2.5 kpc. Thus it is not possible to rule out the existence of a rotating bar on these grounds.

Long, Kevin↗