Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dense flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

A theoretical and experimental study of turbulent nonevaporating sprays

Measurements and analysis limited to the dilute portions of turbulent nonevaporating sprays injected into a still air environment were completed. Mean and fluctuating velocities and Reynolds stress were measured in the continuous phase. Liquid phase measurements included liquid mass fluxes, drop sizes and drop size and velocity correlation. Initial conditions needed for model evaluation were measured at a location as close to the injector exit as possible. The test sprays showed significant effects of slip and turbulent dispersion of the discrete phase. The measurements were used to evaluate three typical models of these processes: (1) a locally homogenous flow (LHF) model, where slip between the phases were neglected; (2) a deterministic separated flow (DSF) model, where slip was considered but effects of drop dispersion by turbulence were ignored; and (3) a stochastic separated flow (SSF) model, where effects of interphase slip and turbulent dispersion were considered using random-walk computations for drop motion. The LHF and DSF models did not provide very satisfactory predictions for the present measurements. In contrast, the SSF model performed reasonably well with no modifications in the prescription of eddy properties from its original calibration. Some effects of drops on turbulence properties were observed near the dense regions of the sprays.

Solomon, A. S. P.↗
NASA NTRS1992

Impact-generated winds on Venus: Causes and effects

The pressure of the dense atmosphere of Venus significantly changes the appearance of ejecta deposits relative to craters on the Moon and Mercury. Conversely, specific styles and sequences of ejecta emplacement can be inferred to represent different intensities of atmospheric response winds acting over different timescales. Three characteristic timescales can be inferred from the geologic record: surface scouring and impactor-controlled (angle and direction) initiation of the long fluidized run-out flows; nonballistic emplacement of inner, radar-bright ejecta facies and radar-dark outer facies; and very late reworking of surface materials. These three timescales roughly correspond to processes observed in laboratory experiments that can be scaled to conditions on Venus (with appropriate assumptions): coupling between the atmosphere and earlytime vapor/melt (target and impactor) that produces an intense shock that subsequently evolves into blast/response winds; less energetic dynamic response of the atmosphere to the outward-moving ballistic ejecta curtain that generates nonthermal turbulent eddies; and late recovery of the atmosphere to impact-generated thermal and pressure gradients expressed as low-energy but long-lived winds. These different timescales and processes can be viewed as the atmosphere equivalent of shock melting, material motion, and far-field seismic response in the target. The three processes (early Processes, Atmospheric Processes, and Late Recovery Winds) are discussed at length.

Schultz, Pater H.↗
NASA NTRS2007

Characteristics of Boundary Layer Transition in a Multi-Stage Low-Pressure Turbine

An experimental investigation of boundary layer transition in a multi-stage turbine has been completed using surface-mounted hot-film sensors. Tests were carried out using the two-stage Low Speed Research Turbine of the Aerodynamics Research Laboratory of GE Aircraft Engines. Blading in this facility models current, state-of-the-art low pressure turbine configurations. The instrumentation technique involved arrays of densely-packed hot-film sensors on the surfaces of second stage rotor and nozzle blades. The arrays were located at mid-span on both the suction and pressure surfaces. Boundary layer measurements were acquired over a complete range of relevant Reynolds numbers. Data acquisition capabilities provided means for detailed data interrogation in both time and frequency domains. Data indicate that significant regions of laminar and transitional boundary layer flow exist on the rotor and nozzle suction surfaces. Evidence of relaminarization both near the leading edge of the suction surface and along much of the pressure surface was observed. Measurements also reveal the nature of the turbulent bursts occuring within and between the wake segments convecting through the blade row. The complex character of boundary layer transition resulting from flow unsteadiness due to nozzle/nozzle, rotor/nozzle, and nozzle/rotor wake interactions are elucidated using these data. These measurements underscore the need to provide turbomachinery designers with models of boundary layer transition to facilitate accurate prediction of aerodynamic loss and heat transfer.

Wisler, Dave↗
NASA NTRS1985

Development of a carbon formation reactor for carbon dioxide reduction

Applied research, engineering development, and performance evaluation were conducted on a process for formation of dense carbon by pyrolysis of methane. Experimental research showed that dense (0.7 to 1.6 g/cc bulk density and 1.6 to 2.2 g/cc solid density) carbon can be produced by methane pyrolysis in quartzwool-packed quartz tubes at temperatrues of 1100 to 1300 C. This result supports the condensation theory of pyrolytic carbon formation from gaseous hydrocarbons. A full-scale Breadboard Carbon Formation Reactor (CFR) was designed, fabricated, and tested at 1100 to 1200 C with 380 to 2280 sccm input flows of methane. Single-pass conversion of methane to carbon ranged from 60 to 100 percent, with 89 percent average conversion. Performance was projected for an Advanced Carbon Reactor Subsystem (ACRS) which indicated that the ACRS is a viable option for management of metabolic carbon on long-duration space missions.

Noyes, G.↗
NASA NTRS1992

Venusian impact basins and cratered terrains

The consensus regarding interpretation of Magellan radar imagery assigns Venus a young volcanic surface subjected in many areas to moderate crustal shortening. I infer that, on the contrary, ancient densely cratered terrain and large impact basins may be preserved over more than half the planet and that crustal shortening has been much overestimated. I see wind erosion and deposition as far more effective in modifying old structures. Integration with lunar chronology suggests that most of the surface of Venus may be older than 3.0 Ga and much may be older than 3.8 Ga. Broad volcanos, hug volcanic domes, plains preserving lobate flow patterns, and numerous lesser volcanic features, pocked sparsely by impact craters, are indeed obvious on Magellan imagery. Some of these postvolcanic impact craters have been slightly extended, but only a small portion has been flooded by still younger lavas. Relative ages of the young craters are indicated by the varying eolian removal of their forms and ejecta blankets and flow lobes, and the oldest are much subdued. If these young impact craters, maximum diameter 275 km, include all preserved impact structures, then their quantity and distribution indicate that Venus was largely resurfaced by volcanism approx. 0.5 Ga, subsequent eruptions having been at a much reduced rate. Away from the approx. 0.5 Ga volcanic features, much of Venus is, however, dominated by circular and subcircular features, 50-2000 km in diameter, many of them multiring, that may be mostly older impact and impact-melt structures substantially modified by wind action. Eolian erosion scoured to bedrock old ridges and uplands, including those that may be cratered terrains and the rims and outer-ring depressions of large impact basins, and removed all surficial deposits to the limits of resolution of the imagery. The complementary eolian deposits form not only dunes, wind streaks, and small plains, but also broad radar-dark plains, commonly assumed to be volcanic although lacking flow morphology, whose materials appear to be thick because they are smoothly compacted into buried craters.

Hamilton, Warren B.↗
NASA NTRS1995

Interface Instabilities in the Interstellar Medium

In the present communication, we reexamine two limiting cases of star-forming mechanisms involving self-gravity, thermodynamics, and velocity fields, that we believe must be ubiquitous in the ISM -- the generally oblique collision of supersonic gas streams or turbulent eddies. The general case of oblique collisions has not yet been examined. However, two limiting cases have been studied in detail: (1) The head-on collision of two identical gas streams that form dense, cool accretion shocks that become unstable and may form Jeans mass clouds, which subsequently undergo collapse. (2) Linearly unstable tangential velocity discontinuities, which result in Kelvin-Helmholtz (K-H) instabilities and related phenomena. The compressible K-H instabilities exhibit rich and unexpected behaviors. Moreover a new thermal-dynamic (T-D) mode was discovered that arises from the coupling of the perturbed thermal behavior and the unperturbed flow. The T-D mode has the curious characteristic that it may be strongly unstable to interface modes when the global modes in either medium are absolutely thermally stable. In the present communication additional models of case 1 are described and discussed, and self-gravity is added in the linear theory of tangential discontinuities, case 2. We prove that self-gravity fundamentally changes the behavior of interfacial modes -- density discontinuities (or steps) are inherently unstable on roughly the free-fall timescale of the denser medium to perturbations of all wavelengths.

Hunter, J. H., Jr.↗
NASA NTRS1975

Application of blast wave theory to explosive propulsion

An analysis was carried out by using blast wave theory to delineate the important aspects of detonating explosives in nozzles, such as flow and wave phenomena, characteristic length and time scales, and the parameters on which the specific impulse is dependent. The propulsive system utilizes the momentum of the ambient gas set into motion in the nozzle by the explosion. A somewhat simplified model was considered for the situation where the mass of ambient gas in the nozzle is much greater than the mass of gas produced in the explosion, a condition of interest for dense atmospheres, e.g., near the surface of Venus. Instantaneous detonation and energy release was presumed to occur at the apex of a conical nozzle, and the shock wave generated by the explosion was taken to propagate as a spherical wave, thereby setting the ambient gas in the nozzle into one-dimensional radially outward motion.

Back, L. H.↗
NASA NTRS1992

Numerical analysis of bipropellant combustion in liquid thrust chambers by an Eulerian-Eulerian approach

The liquid thrust chambers performance (LTCP) code is used for parametric studies of flow and combustion in liquid rocket engines. Multiphase flow equations are solved in an Eulerian-Eulerian framework, and multistep finite rate chemistry is incorporated. The discretization scheme is fully implicit and is based on the total variation diminishing (TVD) scheme, which is accurate, robust, very efficient and capable of handling steep gradients and stiff chemistry. Effects of injection velocity and chamber size have been considered, and the effect of group combustion on the evaporation rate has been studied for a dense spray.

Dang, A. L.↗
NASA NTRS1991

Regional tectonic analysis of Venus as part of the Pioneer Venus guest investigator project

Over the past year, much of the tectonic analysis of Venus we have done has centered on global properties of the planet, in order to understand fundamental aspects of the dynamics of the mantle and lithosphere of Venus. We have developed convection models of the Earth and Venus. These models assume whole mantle internally-heated convection. The viscosity is temperature, volatile-content, and stress dependent. An initial temperature and volatile content is assumed, and the thermal evolution is tracked for 4.6 billion years. During this time, heating occurs by decay of radiogenic elements in the mantle, and degassing and regassing of volatiles takes place at the surface. For a model assuming plate tectonics as the primary heat loss mechanism, representing the Earth through most of it's history and perhaps Venus' earlier history, degassing of the mantle was found to occur rapidly (approximately 200 My) over a large range of parameters. Even for parameters chosen to represent extreme cases of an initially cool planet, low radiogenic heating, and large initial volatile complement, the mantle water content was degassed to an equilibrium value in about 2 By. These values may be applicable to the early Venus, if a large, Moon-forming impact on Earth resulted in efficient heating and loss of water, leaving Venus with a comparably greater volatile budget and less vigorous early convection. It may therefore be impossible to retain large amounts of water in the interior of Venus until the planet cools down enough for the 'cold-trap' effect to take place. This effect traps crust forming melts within the mantle due to a cusp in the solidus, causing these melts to refreeze at depth into a dense eclogite phase, which will inhibit ascent of this material to the surface. This effect, however, requires a hydrous mantle, so early loss of water might prevent it from taking place. Since without plate tectonics there is no mechanism for regassing volatiles into the mantle, as occurs on Earth at subduction zones, this means the interior of Venus would at present be almost completely dry. We have also calculated argon degassing, and mantle flow velocities. viscosities, and cooling rates in these models, and these values can provide constraints on present day mantle dynamics.

Williams, David R.↗
NASA NTRS2004

Downscattering due to Wind Outflows in Compact X-ray Sources: Theory and Interpretation

A number of recent lines of evidence point towards the presence of hot, outflowing plasma from the central regions of compact Galactic and extragalactic X-ray sources. Additionally, it has long been noted that many of these sources exhibit an "excess" continuum component, above approx. 10 keV, usually attributed to Compton Reflection from a static medium. Motivated by these facts, as well as by recent observational constraints on the Compton reflection models - specifically apparently discrepant variability timescales for line and continuum components in some cases - we consider possible of effects of out-flowing plasma on the high-energy continuum spectra of accretion powered compact objects. We present a general formulation for photon downscattering diffusion which includes recoil and Comptonization effects due to divergence of the flow. We then develop an analytical theory for the spectral formation in such systems that allows us to derive formulae for the emergent spectrum. Finally we perform the analytical model fitting on several Galactic X-ray binaries. Objects which have been modeled with high-covering-fraction Compton reflectors, such as GS1353-64 are included in our analysis. In addition, Cyg X-3, is which is widely believed to be characterized by dense circumstellar winds with temperature of order 10(exp 6) K, provides an interesting test case. Data from INTEGRAL and RXTE covering the approx. 3 - 300 keV range are used in our analysis. We further consider the possibility that the widely noted distortion of the power-law continuum above 10 keV may in some cases be explained by these spectral softening effects.

Titarchuk, Lev↗
NASA NTRS1989

Fluvial valleys and Martian palaeoclimates

Theoretical models of early Martian atmospheric evolution describe the maintenance of a dense CO2 atmosphere and a warm, wet climate until the end of the heavy-bombardment phase of impacting. However, the presence of very young, earthlike fluvial valleys on the northern flank of Alba Patera conflicts with this scenario. Whereas the widespread ancient Martian valleys generally have morphologies indicative of sapping erosion by the slow outflow of subsurface water, the local Alba valleys were probably formed by surface-runoff processes. Because subsurface water flow might be maintained by hydrothermal energy inputs and because surface-runoff valleys developed late in Martian history, it is not necessary to invoke drastically different planet-wide climatic conditions to explain valley development on Mars. The Alba fluvial valleys can be explained by hydrothermal activity or outflow-channel discharges that locally modified the atmosphere, including precipitation and local overland flow on low-permeability volcanic ash.

Gulick, Virginia C.↗
NASA NTRS1989

Modeling mass loss from B(e) stars

It was suggested by Zickgraf et al. (1986) that the outer atmospheres of some B(e) stars have a two-component structure: a fast, radiation-driven wind from the pole, and a dense, slow outflow from the equator. Poe et al. (1989) developed this theory to explain the momentum problem associated with WR stars. This paper uses the multiforce wind theory of Poe et al. to model the B(e) outflow phenomenon. Two general questions are investigated: (1) whether B(e) stars can be rotating near critical speed, and if so, (2) what constraints can be placed on the parameters that determine the two-component flow structure.

Cassinelli, J. P.↗
NASA NTRS1993

Jet induced star formation in centrally dominant galaxies?

Using U-I CCD color maps of two centrally dominant cluster galaxies, we find unusual color structures which may be due to star formation which has been induced by their radio sources. These objects, located in the clusters A1795 and A2597, have blue central colors to radii of 20 kpc, spatially extended emission-line structures, and powerful radio sources. They reside at the centers of cooling flows with mass-accretion rates which are estimated to be approximately greater than 300 solar mass/yr. The regions of bluest local color are superposed on or along their radio-source structures. Our observations suggest that the radio sources associated with these objects may be inducing massive star formation in their central 20 kpc. The star formation may be the result of the radio plasma interacting with the warm emission-line gas and dense, x-ray emitting filaments similar to those recently discovered in two other clusters with the ROSAT Observatory. Since radio jets are likely to be transient, this may help to explain the scatter in the correlations between color and mass-accretion rate, although other factors may also contribute. Alternatively, scattered radiation from a hidden active nucleus or recent mergers may be responsible for the color structure. The color and radio properties of these objects are qualitatively similar but smaller in luminosity and spatial extent to those found in high redshift radio galaxies. Our observations of galaxies at z approximately = 0.06-0.1 show that processes similar to 'the alignment effect' found in high redshift radio galaxies occur at more recent epochs.

Mcnamara, Brian R.↗
NASA NTRS1996

Three-Dimensional Multiscale MHD Model of Cometary Plasma Environments

First results of a three-dimensional multiscale MHD model of the interaction of an expanding cometary atmosphere with the magnetized solar wind are presented. The model starts with a supersonic and super-Alfvenic solar wind far upstream of the comet (25 Gm upstream of the nucleus) with arbitrary interplanetary magnetic field orientation. The solar wind is continuously mass loaded with cometary ions originating from a 10-km size nucleus. The effects of photoionization, electron impact ionization, recombination, and ion-neutral frictional drag are taken into account in the model. The governing equations are solved on an adaptively refined unstructured Cartesian grid using our new multiscale upwind scalar conservation laws-type numerical technique (MUSCL). We have named this the multiscale adaptive upwind scheme for MHD (MAUS-MHD). The combination of the adaptive refinement with the MUSCL-scheme allows the entire cometary atmosphere to be modeled, while still resolving both the shock and the diamagnetic cavity of the comet. The main findings are the following: (1) Mass loading decelerates the solar wind flow upstream of the weak cometary shock wave (M approximately equals 2, M(sub A) approximately equals 2), which forms at a subsolar standoff distance of about 0.35 Gm. (2) A cometary plasma cavity is formed at around 3 x 10(exp 3) km from the nucleus. Inside this cavity the plasma expands outward due to the frictional interaction between ions and neutrals. On the nightside this plasma cavity considerably narrows and a relatively fast and dense cometary plasma beam is ejected into the tail. (3) Inside the plasma cavity a teardrop-shaped inner shock is formed, which is terminated by a Mach disk on the nightside. Only the region inside the inner shock is the 'true' diamagnetic cavity. (4) The model predicts four distinct current systems in the inner coma: the density peak current, the cavity boundary current, the inner shock current, and finally the cross-tail current. (5) The calculated plasma parameters (magnetic field, plasma density, speed, and temperature) are in very good agreement with published Giotto observations.

Gombosi, Tamas I.↗
NASA NTRS2003

Remote Radio Sounding Science for JIMO

Radio sounding of the Earth's top side ionosphere and magnetosphere is a proven technique from geospace missions such as the International Satellites for Ionospheric Studies (ISIS) and the Imager for Magnetopause-to-Aurora Global Exploration (IMAGE). Application of this technique to the Jupiter Icy Moons Orbiter (JIMO) mission will provide unique remote sensing observations of the plasma and magnetic field environments, and the subsurface conductivities, of Europa, Ganymede, and Callisto. Spatial structures of ionospheric plasma above the moon surfaces vary in response to magnetic field perturbations from (1) magnetospheric plasma flows, (2) ionospheric currents from ionization of sputtered surface material, and (3) induced electric currents in salty subsurface oceans. Radio sounding at 3 kHz to 10 MHz can provide globally-determined electron densities necessary for the extraction of the oceanic current signals and supplements in-situ plasma and magnetic field measurements. Subsurface variations in conductivity, can be investigated by radio sounding from 10 MHz to 40 MHz allowing the determination of the presence of dense and solid-liquid phase boundaries associated with oceans and related structures in overlying ice crusts.

Green, J. L.↗
NASA NTRS1984

Thermohaline circulation below the Ross Ice Shelf - A consequence of tidally induced vertical mixing and basal melting

The warmest water below parts of the Ross Ice Shelf resides in the lowest portion of the water column because of its high salinity. Vertical mixing caused by tidal stirring can thus induce ablation by lifting the warm but dense water into contact with the ice shelf. A numerical tidal simulation indicates that vertically well-mixed conditions predominate in the southeastern part of the sub-ice shelf cavity, where the water column thickness is small. Basal melting in this region is expected to be between 0.05 and 0.5 m/yr and will drive a thermohaline circulation having the following characteristics: high salinity shelf water (at - 1.8 C), formed by winter sea ice production in the open Ross Sea, flows along the seabed toward the tidal mixing fronts below the ice shelf; and meltwater (at -2.2 C), produced in the well-mixed region, flows out of the sub-ice shelf cavity along the ice shelf bottom. Sensitivity of this ablation process to climatic change is expected to be small because high salinity shelf water is constrained to have the sea surface freezing temperature.

Macayeal, D. R.↗
NASA NTRS1987

Bipolar flows, molecular gas disks, and the collapse and accretion of rotating interstellar clouds

Rigorous numerical models of the collapse and accretion of rotating, axisymmetric, isothermal interstellar clouds are studied. The results show that molecular gas disks and evacuated bipolar cavities both appear to be natural consequences of the collapse of rotating interstellar clouds. Dynamically significant magnetic fields may not be necessary for explaining either phenomenon. The models strongly support theoretical models of the type where an isotropic wind from a pre-main sequence star is extrinsically collimated by a rotationally derived molecular gas cloud. The models imply that collimation should be strongest on small scales where rotational effects are most important, i.e., in the dense region of the molecular gas disk.

Boss, Alan P.↗
NASA NTRS1991

The thermal stability of coronal loops - Numerical simulations

The radiative stability of thermally isolated coronal loops with free-flow boundary conditions by nonlinear numerical simulation are studied. A chromosphere-to-corona loop equilibrium (including the option of a deep chromosphere) is first established by following the nonlinear evolution from an initial isothermal state with rigid boundaries. The end conditions are then changed, to allow free flow and to fix the temperature, and investigate the response to nonisobaric perturbations. Within a family of loops of the same pressure, long hot loops to be stable and short cool loops to be unstable to the thermal chromospheric-expansion mode are found. The stable cases remain so, even when long chromospheric ends and/or gravity are added. In those cases which are unstable, the subsequent nonlinear evolution which exhibits swelling of the chromosphere until the entire loop becomes cool and dense are followed.

Mok, Y.↗