Search NASA⌕ Search

SEARCH · Search NASA

Results for “Developed Countries”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Comparison of manually produced and automated cross country movement maps using digital image processing techniques

The Image-Based Information System (IBIS) was used to automate the cross country movement (CCM) mapping model developed by the Defense Mapping Agency (DMA). Existing terrain factor overlays and a CCM map, produced by DMA for the Fort Lewis, Washington area, were digitized and reformatted into geometrically registered images. Terrain factor data from Slope, Soils, and Vegetation overlays were entered into IBIS, and were then combined utilizing IBIS-programmed equations to implement the DMA CCM model. The resulting IBIS-generated CCM map was then compared with the digitized manually produced map to test similarity. The numbers of pixels comprising each CCM region were compared between the two map images, and percent agreement between each two regional counts was computed. The mean percent agreement equalled 86.21%, with an areally weighted standard deviation of 11.11%. Calculation of Pearson's correlation coefficient yielded +9.997. In some cases, the IBIS-calculated map code differed from the DMA codes: analysis revealed that IBIS had calculated the codes correctly. These highly positive results demonstrate the power and accuracy of IBIS in automating models which synthesize a variety of thematic geographic data.

Wynn, L. K.↗
NASA NTRS1995

International space station wire program

Hardware provider wire systems and current wire insulation issues for the International Space Station (ISS) program are discussed in this viewgraph presentation. Wire insulation issues include silicone wire contamination, Tefzel cold temperature flexibility, and Russian polyimide wire insulation. ISS is a complex program with hardware developed and managed by many countries and hundreds of contractors. Most of the obvious wire insulation issues are known by contractors and have been precluded by proper selection.

May, Todd↗
NASA NTRS2003

Next Generation Active Buffet Suppression System

Buffeting is an aeroelastic phenomenon that is common to high performance aircraft, especially those with twin vertical tails like the F/A-18, at high angles of attack. These loads result in significant random stresses, which may cause fatigue damage leading to restricted capabilities and availability of the aircraft. This paper describes an international collaborative research activity among Australia, Canada and the United States involving the use of active structural control to alleviate the damaging structural response to these loads. The research program is being co-ordinated by the Air Force Research Laboratory (AFRL) and is being conducted under the auspices of The Technical Cooperative Program (TTCP). This truly unique collaborative program has been developed to enable each participating country to contribute resources toward a program that coalesces a broad range of technical knowledge and expertise into a single investigation. This collaborative program is directed toward a full-scale test of an F/A-18 empennage, which is an extension of an earlier initial test. The current program aims at applying advanced directional piezoactuators, the aircraft rudder, switch mode amplifiers and advanced control strategies on a full-scale structure to demonstrate the enhanced performance and capability of the advanced active BLA control system in preparation for a flight test demonstration.

Galea, Stephen C.↗
NASA NTRS2016

A First Look at the Upcoming SISO Space Reference FOM

Simulation is increasingly used in the space domain for several purposes. One example is analysis and engineering, from the mission level down to individual systems and subsystems. Another example is training of space crew and flight controllers. Several distributed simulations have been developed for example for docking vehicles with the ISS and for mission training, in many cases with participants from several nations. Space based scenarios are also used in the "Simulation Exploration Experience", SISO's university outreach program. We have thus realized that there is a need for a distributed simulation interoperability standard for data exchange within the space domain. Based on these experiences, SISO is developing a Space Reference FOM. Members of the product development group come from several countries and contribute experiences from projects within NASA, ESA and other organizations. Participants represent government, academia and industry. The first version will focus on handling of time and space. The Space Reference FOM will provide the following: (i) a flexible positioning system using reference frames for arbitrary bodies in space, (ii) a naming conventions for well known reference frames, (iii) definitions of common time scales, (iv) federation agreements for common types of time management with focus on time stepped simulation, and (v) support for physical entities, such as space vehicles and astronauts. The Space Reference FOM is expected to make collaboration politically, contractually and technically easier. It is also expected to make collaboration easier to manage and extend.

Crues, Edwin↗
NASA NTRS2003

Fuel cell environmental life cycle assessment : a progress report

Energy generation using fuel cells offers the possibility of high conversion efficiency and reduced pollution. Thus, in the futue, conventional methods of energy generation using coalfired power plants, natural gas turbines and internal combustion engines can potentially be replaced by fuel cells. The United States, Japan and several countries in Europe are currently developing fuel cells for transportation, distributed energy generation and portable electronics applications. On a system basis, the efficiency of chemical to electrical energy conversion in fuel cells can be as high as 45%. Also, because of the lower operating temperatures compared to turbines and internal combustion engines, emissions such as carbon monoxide and nitrogen oxides are extremely small. An assessment of the environmental impact of fuel cells over the entire lifecycle is needed to determine the specific benefits in various application scenarios. Such a comparative pollutants assessment must include a "cradle to grave" approach encompassing fuel production, fuel transportation, materials/manufacturing processes, waste management, and recycling. A comparative pollutant model would be a useful tool for industry and government in estimating energy savings and environmental credits, and providing a holistic understanding on regulatory needs. Another important benefit would be the ability to make appropriate comparisons with competitive energy generation technologies such as hybrids, turbines, and internal combustion engines, and to set up realistic targets. Also, exercising the model will assist in the initial screening for potential hot spots and showstoppers and focus on the right component technologies design for manufacturing, designs for input substitution and waste minimization, and prevent any unforeseen burdens.

Narayanan, S. R.↗
DOE OSTI2026

Policy Reforms to Unleash Domestic Critical Minerals Mining and Processing

The United States faces growing strategic and economic risks due to its limited ability to mine, process, and refine the minerals required for national defense, energy systems, advanced manufacturing, and emerging technologies. Although the country possesses significant geological resources, development has been slowed by long and unpredictable permitting timelines, fragmented regulatory responsibilities, limited midstream processing capacity, and a shrinking technical workforce. These structural barriers have created supply chain vulnerabilities that constrain industrial growth and reduce national resilience. This report presents a comprehensive set of reforms intended to modernize the nation’s approach to critical minerals. The recommendations address federal permitting, environmental review processes, the legal framework governing mining activities, interagency coordination, domestic processing and refining capacity, and the education and workforce systems needed to support long term industry development. The analysis emphasizes practical steps to shorten project timelines, improve regulatory clarity, expand processing infrastructure, enable recovery from both conventional and nontraditional sources, and update outdated requirements that hinder the development of essential materials. Taken together, the recommended reforms would strengthen domestic supply chains, improve investment certainty, and reduce dependence on external minerals and processing infrastructure. By aligning policy, regulatory frameworks, and workforce capabilities with national needs, the United States can build a more resilient and secure critical minerals ecosystem that supports long term economic competitiveness and technological leadership.

29 - ENERGY PLANNING, POLICY AND ECONOMY↗
NASA NTRSDate not supplied

AgMIP Local, National and Global Assessments of Food System Challenges in A Changing Climate

Food systems connect a diverse network of stakeholders around the world, with complex dynamics governing production, processing, transportation, trade and consumption of food products. Extreme conditions can disrupt multiple components of the food system, with systemic connections providing structure that can both buffer and exacerbate risks. Climate change is shifting current practices in agricultural production and the broader food system, encouraging shifts toward more diverse value chains capable of drawing from multiple food producing regions to reduce the chance that an entire value chain be subject to simultaneous impacts. The IPCC Working Group I report assessed that heat waves, fires, floods and severe storms are becoming more pronounced and widespread with each degree of global warming, increasing food system risk. Food system disruptions can also come from outside the climate system, including from viral outbreaks, geopolitical conflict and socioeconomic changes. This presentation will highlight how the Agricultural Model Intercomparison and Improvement Project (AgMIP) develops modeling approaches that connect climate, biophysical and socioeconomic models in order to capture complex responses of the food system and potential interventions by diverse stakeholders in the public and private sectors. Models are applied on a range of scales that match decision contexts. These include households in specific agricultural production regions (e.g., within a country), national-level policymakers considering policies, sustainability and development priorities for a country’s agricultural sector, and global food market models that balance production and consumption around the world with competition for land, water, energy and sustainability priorities. Models are capable of capturing many important responses, but further development is needed to represent key systemic risks and the possibility for additional interventions beyond the farm gate. Improved food system models will provide important insights into our society’s ability to cope with climate change, as well as our ability to identify agricultural adaptation and mitigation opportunities to reduce overall risk.

Food systems↗
NASA NTRS1992

Large scale optimization using ASTROS: An overview

Interest in interdisciplinary systems is widespread around the world. A number of structural optimization systems are being developed and tested. Some examples are listed here. ASOP, FASTOP, and TSO are programs developed for the Air Force Flight Dynamics Laboratory during the seventies. These programs established the feasibility of integrating various disciplines. The program 'STARS' is basically a structural optimization system developed by the Royal Aircraft Establishment (RAE) in England. At present, it is being enhanced to include aeroelasticity. 'LAGRANGE' is an optimization system developed by MBB in Germany. ELFINI is a similar system developed in France. It is being marketed in the U.S. as well as other countries. The Automated STRuctural Optimization System (ASTROS) was developed for the Flight Dynamics Directorate of Wright Laboratory. The ASTROS system is described in viewgraph form.

Venkayya, Vipperia B.↗
NASA NTRS2002

Reference and Standard Atmosphere Models

This paper describes the development of standard and reference atmosphere models along with the history of their origin and use since the mid 19th century. The first "Standard Atmospheres" were established by international agreement in the 1920's. Later some countries, notably the United States, also developed and published "Standard Atmospheres". The term "Reference Atmospheres" is used to identify atmosphere models for specific geographical locations. Range Reference Atmosphere Models developed first during the 1960's are examples of these descriptions of the atmosphere. This paper discusses the various models, scopes, applications and limitations relative to use in aerospace industry activities.

Johnson, Dale L.↗
NASA NTRS2006

Central America Regional Climate Change Program: Tools for Your Use

USAID/E-CAM and EGAT's Global Climate Change Team, in partnership with EPA, NASA, Oak Ridge National Lab, and the Central American Commission for Environment and Development (CCAD), have had a significant impact on the region's ability to monitor, mitigate, and adapt to environmental threats. Environmental decision-making tools and data are posted on a website (SERVIR: http://servir.nsstc.nasa.pov/home.html)that provides satellite and geographic data and maps to anybody with an Internet connection. The SERVIR program has been identified as the model for the Global Earth Observation System of Systems (GEOSS) - a major international effort to develop a 21st century system for environmental management and disaster response. In coordination with the USAID/EPA program, NASA has developed a GIs tool that enables countries to examine their forest cover and document changes on an annual basis. This information is used in calculating carbon emissions as part of greenhouse gas inventories, but also serves a valuable monitoring function. In addition, USAID/E-CAM and EGAT's Global Climate Change Team in collaboration with EPA are helping countries meet their obligations as signatories to the United Nations Framework Convention on Climate Change (UNFCCC). EPA is assisting Central American governments to improve the quality of their greenhouse gas emission inventories reported to the UNFCCC through the development of tools and improvements in data quality. New EPA tools developed include software to automatically calculate greenhouse gas emissions for the agricultural and forestry sector inventories, determine key sources of greenhouse gas emissions, and document institutional arrangements. Several of these tools are state of the art and are comparable to tools currently used in the U.S.

Irwin, Dan↗
NASA NTRS1986

Processes and process development in Japan

The commercialization of solar power generation necessitates the development of low cost manufacturing method of silicon suitable for solar cells. The manufacturing methods of semiconductor grade silicon (SEG-Si) and the development of solar grade silicon (SOG-Si) in foreign countries was investigated. It was concluded that the most efficient method of developing such materials was the hydrogen reduction process of trichlorosilane (TCS), using a fluidized bed reactor. The low cost reduction of polysilicon requires cost reductions of raw materials, energy, labor, and capital. These conditions were carefully reviewed. The overall conclusion was that a development program should be based on the TCS-FBR process and that the experimental program should be conducted in test facilities capable of producing 10 tons of silicon granules per year.

Noda, T.↗
NASA NTRS1979

Wing shape optimization for maximum cross-country speed, with mathematical programming

A computer program was developed to calculate numerically the speed and circling polars of an aircraft when the lift and drag characteristics of the wing airfoils are known. The planform of the wing is described by variables which are optimized so that the cross-country speed of the glider is maximum for the particular type of thermal model. Two thermal models are compared and shown that with a greater wing area than now normally used the performance can be increased.

Helwig, G.↗
NASA NTRSDate not supplied

Biomass burning declines lead to large net reductions in NO2 concentrations over north equatorial Africa in spite of growing fossil fuel emissions

Socio-economic development in low and middle-income countries has been accompanied by increased emissions of air pollutants such as nitrogen oxides (NOx: nitrogen dioxide (NO2) + nitric oxide (NO)), which affect human health. In sub-Saharan Africa, fossil fuel combustion has nearly doubled since 2000. At the same time, biomass burning—another important NOx source—has declined in Africa’s northern biomass burning region, attributed to changes in climate and anthropogenic fire management associated with agricultural development. Here we use satellite observations of tropospheric NO2 vertical column densities (VCDs) and burned area to identify NO2 trends and drivers over Africa. Across the northern ecosystems where biomass burning occurs—home to over 350 million people—mean annual tropospheric NO2 VCDs decreased by 4.5% from 2005 through 2017 during the biomass burning season of November through February. Reductions in burned area explained the majority of these change in NO2 VCDs, but there were also weaker relationships between changes in NO2 VCDs and fossil fuel emissions over parts of West Africa, which were stronger during rainy season. Over Africa’s biomass burning regions, NO2 VCDs tended to decrease with increasing population density up to a threshold of approximately 180 people per km2, suggesting that anthropogenic activity causes a net reduction in NO2 emissions across roughly 90% of the continent’s biomass burning regions. In contrast to the widely-held perception that socio-economic development worsens air quality in low and middle-income nations, our results suggest that countries in Africa’s northern biomass burning region are following a different pathway, resulting in regional air quality benefits. However, these benefits may be lost with increasing fossil fuel use.

Biomass burning↗
NASA NTRS2021

Reductions in NO2 Burden Over North Equatorial Africa from Decline in Biomass Burning in Spite of Growing Fossil Fuel Use, 2005 to 2017

Socioeconomic development in low- and middle-income countries has been accompanied by increased emissions of air pollutants, such as nitrogen oxides [NOx: nitrogen dioxide (NO2) + nitric oxide (NO)], which affect human health. In sub-Saharan Africa, fossil fuel combustion has nearly doubled since 2000. At the same time, landscape biomass burning—another important NOx source—has declined in north equatorial Africa, attributed to changes in climate and anthropogenic fire management. Here, we use satellite observations of tropospheric NO2 vertical column densities (VCDs) and burned area to identify NO2 trends and drivers over Africa. Across the northern ecosystems where biomass burning occurs—home to hundreds of millions of people—mean annual tropospheric NO2 VCDs decreased by 4.5% from 2005 through 2017 during the dry season of November through February. Reductions in burned area explained the majority of variation in NO2 VCDs, though changes in fossil fuel emissions also explained some variation. Over Africa’s biomass burning regions, raising mean GDP density (USD·km−2) above its lowest levels is associated with lower NO2 VCDs during the dry season, suggesting that economic development mitigates net NO2 emissions during these highly polluted months. In contrast to the traditional notion that socioeconomic development increases air pollutant concentrations in low- and middle-income nations, our results suggest that countries in Africa’s northern biomass-burning region are following a different pathway during the fire season, resulting in potential air quality benefits. However, these benefits may be lost with increasing fossil fuel use and are absent during the rainy season.

air pollution↗
NASA NTRS1974

Electric propulsion - Past history and future prospects

Studies of feasibility and flight mechanics of electric propulsion systems began around 1946. Conceptual systems design started in 1954, experimental development in 1958; flight tests in 1964 and 1970 proved the functioning of electric thrusters in space. Further development of ion thruster systems has concentrated on bombardment ionization in the U.S., and on radiofrequency, bombardment, and surface-contact ionization in West Germany, Great Britain, France, and the USSR. Electrothermal, plasma, and colloid thruster development has been pursued in many countries. Electric thrusters were used successfully during past years for satellite attitude control, and for prime propulsion of the Soviet spacecraft Yantar. Further applications for attitude and position control of satellites are planned.

Stuhlinger, E.↗
NASA NTRS1989

Other cryogenic wind tunnel projects

The first cryogenic tunnel was built in 1972. Since then, many cryogenic wind-tunnel projects were started at aeronautical research centers around the world. Some of the more significant of these projects are described which are not covered by other lecturers at this Special Course. Described are cryogenic wind-tunnel projects in five countries: China (Chinese Aeronautical Research and Development Center); England (College of Aeronautics at Cranfield, and Royal Aerospace Establishment-Bedford); Japan (National Aerospace Laboratory, University of Tsukuba, and National Defense Academy); United States (Douglas Aircraft Co., University of Illinois at Urbana-Champaign and NASA Langley); and U.S.S.R. (Central Aero-Hydronamics Institute (TsAGI), Institute of Theoretical and Applied Mechanics (ITAM), and Physical-Mechanical Institute at Kharkov (PMI-K).

Kilgore, Robert A.↗
NASA NTRS1994

Space and transatmospheric propulsion technology

This report focuses primarily on Japan's programs in liquid rocket propulsion and propulsion for spaceplane and related transatmospheric areas. It refers briefly to Japan's solid rocket programs and to new supersonic air-breathing propulsion efforts. The panel observed that the Japanese had a carefully thought-out plan, a broad-based program, and an ambitious but achievable schedule for propulsion activity. Japan's overall propulsion program is behind that of the United States at the time of this study, but the Japanese are gaining rapidly. The Japanese are at the forefront in such key areas as advanced materials, enjoying a high level of project continuity and funding. Japan's space program has been evolutionary in nature, while the U.S. program has emphasized revolutionary advances. Projects have typically been smaller in Japan than in the United States, focusing on incremental advances in technology, with an excellent record of applying proven technology to new projects. This evolutionary approach, coupled with an ability to take technology off the shelf from other countries, has resulted in relatively low development costs, rapid progress, and enhanced reliability. Clearly Japan is positioned to be a world leader in space and transatmospheric propulsion technology by the year 2000.

Merkle, Charles↗
NASA NTRS1994

Program control in NASA: Needs and opportunities

NASA has successfully managed some of this country's most complex technology and development programs. These successes have included the application of sound program control processes. The impetus for this study arose from the NASA Management Study Group findings that over time, some program control tools and disciplined procedures and processes had weakened. The Study Group recommended that steps be taken to establish a comprehensive training approach in program management, and specifically, in program control functions. This study looks at program control processes within NASA currently in use, defines a 'model' of program control functions, and provides recommendations on program control training needs and opportunities.

Lilly, William E.↗