Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffuser Flows”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

Air cycle machine for an aircraft environmental control system

An ECS system includes an ACM mounted adjacent an air-liquid heat exchanger through a diffuser that contains a diffuser plate. The diffuser plate receives airflow from the ACM which strikes the diffuser plate and flows radially outward and around the diffuser plate and into the air-liquid heat exchanger to provide minimal pressure loss and proper flow distribution into the air-liquid heat exchanger with significantly less packaging space.

Decrisantis, Angelo A.↗
NASA NTRS1974

Performance of a short annular dump diffuser using wall trailing-edge suction

A short annular dump (abrupt flow area change) diffuser was tested with suction through wall trailing-edge slots at inlet Mach numbers of 0.19 and 0.27 and at near ambient inlet temperature and pressure, with suction flow varied from zero to 10 percent of the inlet air mass-flow rate. The overall ratio of diffuser exit area to inlet area was 4.0, and the ratio of length to inlet height was 2.0. By applying suction flow separately on either wall or to both walls simultaneously, the original annular jet profile could be altered to either a hub- or tip-biased profile. Diffuser effectiveness was increased from about 25 percent with no suction to 50 percent at 6 percent outer-wall suction and to 52 percent at a combined suction rate on both walls of 10.25 percent. At the same time, diffuser total pressure loss was reduced by one-fourth.

Juhasz, A. J.↗
NASA NTRS2004

Parametric Study of a Mach 2.4 Transport Engine with Supersonic Through-Flow Rotor and Supersonic Counter-Rotating Diffuser (SSTR/SSCRD)

A parametric study is conducted to evaluate a mixed-flow turbofan equipped with a supersonic through-flow rotor and a supersonic counter-rotating diffuser (SSTR/SSCRD) for a Mach 2.4 civil transport. Engine cycle, weight, and mission analyses are performed to obtain a minimum takeoff gross weight aircraft. With the presence of SSTR/SSCRD, the inlet can be shortened to provide better pressure recovery. For the same engine airflow, the inlet, nacelle, and pylon weights are estimated to be 73 percent lighter than those of a conventional inlet. The fan weight is 31 percent heavier, but overall the installed engine pod weight is 11 percent lighter than the current high-speed civil transport baseline conventional mixed-flow turbofan. The installed specific fuel consumption of the supersonic fan engine is 2 percent higher than that of the baseline turbofan at supersonic cruise. Finally, the optimum SSTR/SSCRD airplane meets the FAR36 Stage 3 noise limit and is within 7 percent of the baseline turbofan airplane takeoff gross weight over a 5000-n mi mission.

Tran, Donald H.↗
NASA NTRS1987

Application of advanced computational codes in the design of an experiment for a supersonic throughflow fan rotor

Increased emphasis on sustained supersonic or hypersonic cruise has revived interest in the supersonic throughflow fan as a possible component in advanced propulsion systems. Use of a fan that can operate with a supersonic inlet axial Mach number is attractive from the standpoint of reducing the inlet losses incurred in diffusing the flow from a supersonic flight Mach number to a subsonic one at the fan face. The design of the experiment using advanced computational codes to calculate the components required is described. The rotor was designed using existing turbomachinery design and analysis codes modified to handle fully supersonic axial flow through the rotor. A two-dimensional axisymmetric throughflow design code plus a blade element code were used to generate fan rotor velocity diagrams and blade shapes. A quasi-three-dimensional, thin shear layer Navier-Stokes code was used to assess the performance of the fan rotor blade shapes. The final design was stacked and checked for three-dimensional effects using a three-dimensional Euler code interactively coupled with a two-dimensional boundary layer code. The nozzle design in the expansion region was analyzed with a three-dimensional parabolized viscous code which corroborated the results from the Euler code. A translating supersonic diffuser was designed using these same codes.

Wood, Jerry R.↗
NASA NTRS1987

Application of advanced computational codes in the design of an experiment for a supersonic throughflow fan rotor

Increased emphasis on sustained supersonic or hypersonic cruise has revived interest in the supersonic throughflow fan as a possible component in advanced propulsion systems. Use of a fan that can operate with a supersonic inlet axial Mach number is attractive from the standpoint of reducing the inlet losses incurred in diffusing the flow from a supersonic flight Mach number to a subsonic one at the fan face. The design of the experiment using advanced computational codes to calculate the components required is described. The rotor was designed using existing turbomachinery design and analysis codes modified to handle fully supersonic axial flow through the rotor. A two-dimensional axisymmetric throughflow design code plus a blade element code were used to generate fan rotor velocity diagrams and blade shapes. A quasi-three-dimensional, thin shear layer Navier-Stokes code was used to assess the performance of the fan rotor blade shapes. The final design was stacked and checked for three-dimensional effects using a three-dimensional Euler code interactively coupled with a two-dimensional boundary layer code. The nozzle design in the expansion region was analyzed with a three-dimensional parabolized viscous code which corroborated the results from the Euler code. A translating supersonic diffuser was designed using these same codes.

Wood, Jerry R.↗
NASA NTRS1977

An estimate of mean flow properties in a turbulent diffusion flame

Turbulent diffusion flames were computed while neglecting fluctuations of density, concentration and temperature, with reference to a central hydrogen jet issuing into a parallel coaxial airstream. An estimate for the time-average rate of fuel consumption was made, based mainly on dimensional analysis.

Bangert, L. H.↗
NASA NTRS1979

Dynamic regulation of erythropoiesis: A computer model of general applicability

A mathematical model for the control of erythropoiesis was developed based on the balance between oxygen supply and demand at a renal oxygen detector which controls erythropoietin release and red cell production. Feedback regulation of tissue oxygen tension is accomplished by adjustments of hemoglobin levels resulting from the output of a renal-bone marrow controller. Special consideration was given to the determinants of tissue oxygenation including evaluation of the influence of blood flow, capillary diffusivity, oxygen uptake and oxygen-hemoglobin affinity. A theoretical analysis of the overall control system is presented. Computer simulations of altitude hypoxia, red cell infusion hyperoxia, and homolytic anemia demonstrate validity of the model for general human application in health and disease.

Leonard, J. I.↗
NASA NTRS1979

An elliptic representation of coupled boundary layers and inviscid core for computation of separated internal flows

This report presents a viscous-inviscid calculation method for the prediction of turbulent incompressible flows in diffusers with small regions of stall. Integral turbulent boundary layer equations (BLE) are used to provide boundary conditions for a finite difference representation of the inviscid core. The BLE are applied at the floating displacement-thickness line, resulting in a simulataneous set of nonlinear block tridiagonal equations which are solved iteratively using a sucessive line-relaxation technique. Results of the method have been applied to calculate the performance of a variety of asymmetric stalled diffusers.

Ghose, S.↗
NASA NTRS1984

A convective model for turbulent mixing in rotating convection zones

The effects of rotation are included in an analytical model for the convective motions in a plane-parallel layer of an ideal fluid. The turbulent stress tensor, formed by taking products and averages of the various velocity components, is calculated for an arbitrary eddy size and shape. Heuristic formulae presented for determining the size and shape of the dominant eddy then give a fully specified stress tensor. Applications for this stress tensor in problems of stellar internal dynamics, heat flow, scalar diffusion, and dynamo theory are suggested. The resultant stresses tend to produce differential rotation profiles with rapidly rotating equators and interiors. The dynamo activity associated with these convective motions tends to occur near the lower boundary of the convection zone.

Hathaway, D. H.↗
NASA NTRS1984

Calculations of separation bubbles using boundary-layer-type equations. I. II

Two-dimensional models of separated flows are presented with stream-function boundary equations. A patching procedure is employed to solve for unknowns in viscous-inviscid interactions simultaneously in order to derive strong coupling. The technique features simplified Navier-Stokes equations and is useful for flows around flat plates and more complex geometries such as airfoils and cascades. Sample calculations are provided for separated flows in diffusers and in the neighborhood of trailing edges. Massive bubbles and unclosed bubbles are noted to present difficulties for the models.

Halim, A.↗
NASA NTRS1985

Simulations of the mean solar magnetic field during sunspot cycle 21

Regarding new bipolar magnetic regions as sources of flux, the evolution of the photospheric magnetic field during 1976-1984 was computed and the corresponding evolution of the mean line-of-sight field as seen from earth was derived. A good, but imperfect, agreement was obtained between the observed mean field and the field computed for a nominal choice of flux transport parameters. The response of the computed mean field to variations in the transport parameters and the source properties was determined. The results suggest that the mean-field evolution is a random-walk process with dissipation. New eruptions of flux produce the random walk, and together differential rotation, meridional flow, and diffusion provide the dissipation. The net effect of each new source depends on its strength and orientation and on the time elapsed before the next eruption.

Sheeley, N. R., Jr.↗
NASA NTRS1985

Radio continuum emission from T Tauri stars and associated structures

The current status of radio continuum observations of low mass, pre-main sequence stars (T Tauri stars) is discussed. The majority of T Tauri radio sources have been detected by the VLA telescope and a guide to both these and earlier observations is presented. Both nonthermal and thermal radio continuum emission has been detected from T Tauri stars. The likely emission processes and specific examples of their occurrence are outlined. The detected radio sources are often associated with the surroundings of the star, such as bipolar flows or diffuse extended optical nebulosity, rather than regions very close to the stellar surface. Only recently have radio continuum observations reached a sensitivity appropriate to the expected level of thermal free-free emission from the winds of ordinary T Tauri stars and it is possible that many more radio sources will now be found associated with these stars.

Brown, A.↗
NASA NTRS1986

Materials processing in space - Review of the early experiments

Basic research performed to study various aspects of fluid behavior in a microgravity environment during the first two decades of spaceflight is described. The uniqueness of space was recognized in the 1950s as a place where buoyancy-driven convective flows and sedimentation would effectively be absent. The conditions were favorable for experiments in crystal growth, alloy solidification, combustion, thermocapillary flows, electroosmotic flows, Stefan flows, Soret diffusion, and solidification processes. Pre-Skylab NASA drop tower experiments and Apollo 14 and 17 experiments made in preparation for Skylab are described. Skylab welding and brazing, crystal growth, metallurgy and liquid float zone trials and Apollo-Soyuz crystal growth, electrophoresis and metallurgical experiments are summarized. SPAR rocket trials along similar lines are also outlined.

Naumann, Robert J.↗
NASA NTRS1987

Double diffusive convection during directional solidification - Nonlinear analysis

The dynamics of doubly diffusive convective flow during the constant-velocity vertical solidification of binary melts to form single-phase solids is examined, summarizing the results of recent experimental and analytical investigations. The effects of horizontal temperature gradients are considered; the nonlinearities of the system and their numerical treatment are discussed; and numerical results are presented graphically for the solidification of a Pb melt containing 0.0015 wt pct Sn, with growth velocity 0.0002 cm/s and a temperature gradient of 200 K/cm in the liquid.

Coriell, S. R.↗