Search NASA⌕ Search

SEARCH · Search NASA

Results for “Discriminant Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS2009

Systematics in the Electron Spectrum Measured by ATIC

An analysis of different parameters to separate electrons from protons in the ATIC experiment has been performed. Five separate discriminants were studied by different Monte Carlo programs, leading to a variety of results. Application to the ATIC data indicates the range of variation possible in the interpretation of the data. The results of this analysis, when compared with the published results [5], show good agreement in the most interesting region of energy (from 90 GeV to 600 GeV). The measured electron spectrum is compared with the recent data reported by Fermi/LAT, and there is no major disagreement between ATIC s results and Fermi/LAT. Finally, possible systematics-free, short energy scale features of the ATIC electron spectrum are mentioned. Keywords: ATIC, electron spectrum, fine structure

Panov, A. D.↗
NASA NTRS1982

Application of HCMM data to regional geologic analysis for mineral and energy resource evaluation

Using a thermal-inertia mapping algorithm which provides greater discrimination capability than those in current use, a geologic features was detected in the Cabeza Prieta, Arizona, area. Initially seen on an image formed as a difference of two thermal-inertia images, it was found to be the extension of a bilaterally symmetrical aeromagnetic feature which trends northeast for a distance of at least 1200 km.

Watson, K.↗
NASA NTRS1973

Use of the SRI electronic satellite image analysis console for mapping southern Arizona plant communities from ERTS-1 imagery

Cloud-free imagery covering the Tucson, Ariz., region for the period from August 22 to November 2, 1972, was used to determine the utility of ERTS-1 data for discriminating boundaries between plant communities. The following studies were made from imagery analyzed by use of an Electronic Satellite Image Analysis Console: (1) console-generated color composites from MSS-5 and MSS-6 bands were recorded photographically from the console color monitor. The color photographs were then used to compare with short-term changes in vegetative cover observed on the ground; (2) using the console, microdensitometric traces were made along selected traverses to quantify changes in scene irradiance across the image field; (3) quantitative plant coverage data, collected at ground-truth stations along the traverses, were compared with the densitometric values.

Turner, R. M.↗
NASA NTRS1975

Crop identification technology assessment for remote sensing (CITARS). Volume 6: Data processing at the laboratory for applications of remote sensing

The results of classifications and experiments for the crop identification technology assessment for remote sensing are summarized. Using two analysis procedures, 15 data sets were classified. One procedure used class weights while the other assumed equal probabilities of occurrence for all classes. Additionally, 20 data sets were classified using training statistics from another segment or date. The classification and proportion estimation results of the local and nonlocal classifications are reported. Data also describe several other experiments to provide additional understanding of the results of the crop identification technology assessment for remote sensing. These experiments investigated alternative analysis procedures, training set selection and size, effects of multitemporal registration, spectral discriminability of corn, soybeans, and other, and analyses of aircraft multispectral data.

Bauer, M. E.↗
NASA NTRS1983

Geometric rectification of radar imagery using digital elevation models

Geologic analysis of radar imagery requires accurate spatial rectification to allow rock type discrimination and meaningful exploitation of multisensor data files. A procedure is described which removes distortions produced by most sources including the heretofore elusive problem of terrain induced effects. Rectified imagery is presented which displays geologic features not apparent in the distorted data.

Naraghi, M.↗
NASA NTRS1989

Polarization filtering of SAR data

A theoretical analysis of polarization filtering for the bistatic case is developed for optimum discrimination between two types of targets. The resulting method is half analytical and half numerical. Because it is based on the Stokes matrix representation, the targets of interest can be extended targets. The scattered field from such targets is partially polarized. This method is then applied to the monostatic case with numerical examples relying on the JPL (Jet Propulsion Laboratory) full-polarimetric L-band radar data. A matched filter to maximize the power ratio between urban and natural targets is developed. The results show that the same filter is optimal for both ocean and forest targets as natural targets.

Dubois, Pascale C.↗
NASA NTRS1992

Monitoring Cen X-3 with BATSE

The eight uncollimated BATSE Large Area Detectors (LAD's) provide the ability to monitor pulsed hard x ray sources on a nearly continuous basis. Using data from the LAD's, the pulse timing and pulsed flux of the 4.8 second period binary x ray pulsar Centaurus X-3 was analyzed over a two month period. The methods and initial results of this analysis, which includes both data folded onboard GRO and 1.024 second resolution discriminator rates folded on the ground, are presented.

Finger, Mark H.↗
NASA NTRS2001

Gear Damage Detection Using Oil Debris Analysis

The purpose of this paper was to verify, when using an oil debris sensor, that accumulated mass predicts gear pitting damage and to identify a method to set threshold limits for damaged gears. Oil debris data was collected from 8 experiments with no damage and 8 with pitting damage in the NASA Glenn Spur Gear Fatigue Rig. Oil debris feature analysis was performed on this data. Video images of damage progression were also collected from 6 of the experiments with pitting damage. During each test, data from an oil debris sensor was monitored and recorded for the occurrence of pitting damage. The data measured from the oil debris sensor during experiments with damage and with no damage was used to identify membership functions to build a simple fuzzy logic model. Using fuzzy logic techniques and the oil debris data, threshold limits were defined that discriminate between stages of pitting wear. Results indicate accumulated mass combined with fuzzy logic analysis techniques is a good predictor of pitting damage on spur gears.

Dempsey, Paula J.↗
NASA NTRS2012

Multi-Angle Implementation of Atmospheric Correction (MAIAC) Algorithm

Multi-Angle Implementation of Atmospheric Correction (MAIAC) is a new algorithm developed for MODIS. MAIAC uses a time series analysis and processing of groups of pixels to perform simultaneous retrievals of aerosol properties and surface bidirectional reflectance without typical assumptions about the surface. It is a generic algorithm which works over both dark and bright land surfaces, including deserts. MAIAC has an internal Cloud Mask, a dynamic land-water-snow classification and a surface change mask which allows it to flexibly choose processing path over different surfaces. A distinct feature of MAIAC is a high 1 km resolution of aerosol retrievals which is required in different applications including the air quality analysis. The novel features of MAIAC include the high quality cloud mask, discrimination of aerosol type, including biomass burning smoke and dust, and detection of surface change - all required for high quality aerosol retrievals. An overview of the algorithm, results of AERONET validation, and examples of comparison with MODIS Collection 5 aerosol product and Deep Blue algorithm for different parts of the world, will be presented.

Lyapustin, A.↗
NASA NTRS2017

Determining the Optimal Spectral Sampling Frequency and Uncertainty Thresholds for Hyperspectral Remote Sensing of Ocean Color

Using a modified geostatistical technique, empirical variograms were constructed from the first derivative of several diverse remote sensing reflectance and phytoplankton absorbance spectra to describe how data points are correlated with distance across the spectra. The maximum rate of information gain is measured as a function of the kurtosis associated with the Gaussian structure of the output, and is determined for discrete segments of spectra obtained from a variety of water types (turbid river filaments, coastal waters, shelf waters, a dense Microcystis bloom, and oligotrophic waters), as well as individual and mixed phytoplankton functional types (PFTs; diatoms, chlorophytes, cyanobacteria, coccolithophores). Results show that a continuous spectrum of 5 to 7 nm spectral resolution is optimal to resolve the variability across mixed reflectance and absorbance spectra. In addition, the impact of uncertainty on subsequent derivative analysis is assessed, showing that a limit of 3 Gaussian noise (SNR 66) is tolerated without smoothing the spectrum, and 13 (SNR 15) noise is tolerated with smoothing.

Noise in imaging systems↗
NASA NTRS2014

Abiotic Ozone and Oxygen in Atmospheres Similar to Prebiotic Earth

The search for life on planets outside our solar system will use spectroscopic identification of atmospheric biosignatures. The most robust remotely detectable potential biosignature is considered to be the detection of oxygen (O 2 ) or ozone (O 3 ) simultaneous to methane (CH 4 ) at levels indicating fluxes from the planetary surface in excess of those that could be produced abiotically. Here we use an altitude-dependent photochemical model with the enhanced lower boundary conditions necessary to carefully explore abiotic O 2 and O 3 production on lifeless planets with a wide variety of volcanic gas fluxes and stellar energy distributions. On some of these worlds, we predict limited O 2 and O 3 buildup, caused by fast chemical production of these gases. This results in detectable abiotic O 3 and CH 4 features in the UV-visible, but no detectable abiotic O 2 features. Thus, simultaneous detection of O 3 and CH 4 by a UV-visible mission is not a strong biosignature without proper contextual information. Discrimination between biological and abiotic sources of O 2 and O 3 is possible through analysis of the stellar and atmospheric context-particularly redox state and O atom inventory-of the planet in question. Specifically, understanding the spectral characteristics of the star and obtaining a broad wavelength range for planetary spectra should allow more robust identification of false positives for life. This highlights the importance of wide spectral coverage for future exoplanet characterization missions. Specifically, discrimination between true and false positives may require spectral observations that extend into infrared wavelengths and provide contextual information on the planet's atmospheric chemistry.

planets and satellites↗
NASA NTRS1977

Digital color analysis of color-ratio composite LANDSAT scenes

A method is presented that can be used to calculate approximate Munsell coordinates of the colors produced by making a color composite from three registered images. Applied to the LANDSAT MSS data of the Goldfield, Nevada, area, this method permits precise and quantitative definition of the limonitic areas originally observed in a LANDSAT color ratio composite. In addition, areas of transported limonite can be discriminated from the limonite in the hydrothermally altered areas of the Goldfield mining district. From the analysis, the numerical distinction between limonitic and nonlimonitic ground is generally less than 3% using the LANDSAT bands and as much as 8% in ratios of LANDSAT MSS bands.

Raines, G. L.↗
NASA NTRS2012

Extended Testability Analysis Tool

The Extended Testability Analysis (ETA) Tool is a software application that supports fault management (FM) by performing testability analyses on the fault propagation model of a given system. Fault management includes the prevention of faults through robust design margins and quality assurance methods, or the mitigation of system failures. Fault management requires an understanding of the system design and operation, potential failure mechanisms within the system, and the propagation of those potential failures through the system. The purpose of the ETA Tool software is to process the testability analysis results from a commercial software program called TEAMS Designer in order to provide a detailed set of diagnostic assessment reports. The ETA Tool is a command-line process with several user-selectable report output options. The ETA Tool also extends the COTS testability analysis and enables variation studies with sensor sensitivity impacts on system diagnostics and component isolation using a single testability output. The ETA Tool can also provide extended analyses from a single set of testability output files. The following analysis reports are available to the user: (1) the Detectability Report provides a breakdown of how each tested failure mode was detected, (2) the Test Utilization Report identifies all the failure modes that each test detects, (3) the Failure Mode Isolation Report demonstrates the system s ability to discriminate between failure modes, (4) the Component Isolation Report demonstrates the system s ability to discriminate between failure modes relative to the components containing the failure modes, (5) the Sensor Sensor Sensitivity Analysis Report shows the diagnostic impact due to loss of sensor information, and (6) the Effect Mapping Report identifies failure modes that result in specified system-level effects.

Melcher, Kevin↗
NASA NTRS1977

The use of LANDSAT imagery in relation to air survey imagery for terrain analysis in northwest Queensland, Australia, volume 1

The author has identified the following significant results. Distinctive spectral signatures discriminated areas underlain by distinctive lithological/stratigraphical units where bedrock either outcrops or is relatively near to surface in the Lady Annie-Mt. Gordon fault zone, the Mary Kathleen, and Dugald River-Naraku areas. Spectral signatures associated with discrete plant communities distinguished different types of superficial deposits over the Cloncurry Plains. Distinctive spectral signatures also revealed the presence and nature of concealed bedrock beneath cover of residuum and superficial deposits where this is relatively thin in the Cloncurry Plains. Major faults were clearly displayed in areas of outcropping and near surface bedrock. Sets of lineaments with preferred orientations were identified in the Lady Annie and Dugald River areas. Known base metal deposits occur along these features.

Cole, M. M.↗
DOE OSTI2024

Response of a high-pressure 4 He scintillation detector to nuclear recoils up to 9 MeV

Helium-4-based scintillation detector technology is emerging as a strong alternative to pulse-shape discrimination-capable organic scintillators for fast neutron detection and spectroscopy, particularly in extreme gamma-ray environments. The 4 He detector is intrinsically insensitive to gamma radiation, as it has a relatively low cross-section for gamma-ray interactions, and the stopping power of electrons in the 4 He medium is low compared to that of 4 He recoil nuclei. Consequently, gamma rays can be discriminated by simple energy deposition thresholding instead of the more complex pulse shape analysis. The energy resolution of 4 He scintillation detectors has not yet been well-characterized over a broad range of energy depositions, which limits the ability to deconvolve the source spectra. In this work, an experiment was performed to characterize the response of an Arktis S670 4 He detector to nuclear recoils up to 9 MeV. The 4 He detector was positioned in the center of a semicircular array of organic scintillation detectors operated in coincidence. Deuterium–deuterium and deuterium–tritium neutron generators provided monoenergetic neutrons, yielding geometrically constrained nuclear recoils ranging from 0.0925 to 8.87 MeV. The detector response provides evidence for scintillation linearity beyond the previously reported energy range. Finally, the measured response was used to develop an energy resolution function applicable to this energy range for use in high-fidelity detector simulations needed by future applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS1980

LANDSAT applications to wetlands classification in the upper Mississippi River Valley

A 25% improvement in average classification accuracy was realized by processing double-date vs. single-date data. Under the spectrally and spatially complex site conditions characterizing the geographical area used, further improvement in wetland classification accuracy is apparently precluded by the spectral and spatial resolution restrictions of the LANDSAT MSS. Full scene analysis of scanning densitometer data extracted from scale infrared photography failed to permit discrimination of many wetland and nonwetland cover types. When classification of photographic data was limited to wetland areas only, much more detailed and accurate classification could be made. The integration of conventional image interpretation (to simply delineate wetland boundaries) and machine assisted classification (to discriminate among cover types present within the wetland areas) appears to warrant further research to study the feasibility and cost of extending this methodology over a large area using LANDSAT and/or small scale photography.

Lillesand, T. M.↗
NASA NTRS1981

A proposal for continuation of support for the application of remotely sensed data to state and regional problems. Part 1: Technical proposal

The objectives, procedures, accomplishments, plans, and ultimate uses of information from current projects at the Mississippi Remote Sensing Center are discussed for the following applications: (1) land use planning; (2) strip mine inventory and reclamation; (3) biological management for white tailed deer; (4) forest habitats in potential lignite areas; (5) change discrimination in gravel operations; (6) discrimination of freshwater wetlands for inventory and monitoring; and (7) remote sensing data analysis support systems. The initiation of a conceptual design for a LANDSAT based, state wide information system is proposed.

Source record↗