SEARCH · Search NASA

Results for “ELONGATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

All sources NASA NTRS DOE OSTI

NASA NTRS1991

Superfiber For Strong, Light Fabrics

New ultrahigh-molecular-weight fiber offers major advantages as fabric for space suits, diving suits, sporting goods, sails, and ultralight aircraft. Polyolefin fiber has extremely high modulus of elasticity, low elongation, high specific strength, low specific gravity, resistance to chemicals, low moisture absorption, and high resistance to damage by flexure and abrasion. Consists of elongated, highly aligned, highly crystalline polyethylene molecules. Structure not only results in high strength-to-weight ratio but also gives high resistance to tearing and ripping. Fibers woven in many patterns. Offers combination of desirable properties not found in nylon, polyester, or aramid fabrics.

Dawn, Frederic S.↗

NASA NTRS1990

Probe insertion apparatus with inflatable seal

A sealing apparatus is disclosed for inserting a probe into a pressure vessel having an elongated opening includes a pair of resiliently deformable seals opposingly disposed in sealing engagement with each other. A retainer is connected to the pressure vessel around the elongated opening and holds the pair of seals rigidly to the pressure vessel. A wedge is engageable with the pair of seals and carries the probe, for longitudinally translating the probe in pressure vessel.

Trimarchi, Paul A.↗

NASA NTRS1990

The mechanisms of dispersion strengthening and fracture in Al-based XD(tm) alloys, part 1

The influence of reinforcement size, volume fraction, and matrix deformation behavior on room and elevated temperature strength; the fracture toughness; and the fatigue crack growth rate of metal matrix composites of Al-4(pct)Cu-1.5(pct)Mg with TiB2 were examined. The influence of reinforcement volume fraction was also examined for pure aluminum with TiB2. Higher TiB2 volume fractions increased the tensile yield strength at both room and elevated temperatures, and reduced the elongation to fracture. Tensile tests also indicate that small particles provided a greater increase in strength for a given volume fraction than larger particles, whereas elongation to fracture appeared to be insensitive to reinforcement size. Interparticle spacing appears to be the factor that controls the strength of these alloys, with the exact nature of the dependence relying on the nature of dislocation slip in the matrix (planar vs. diffuse). The isothermal aging response of the precipitation strengthened Al-4(pct)Cu-1.5(pct)Mg alloys was not accelerated by the presence of TiB2. Cold work prior to artificial aging created additional geometrically necessary dislocations which serve as heterogeneous nucleation sites leading to accelerated aging, a finer precipitate size, and an increase in the strength of the alloy.

Aikin, R. M., Jr.↗

NASA NTRS1987

Method for fastening aircraft frame elements to sandwich skin panels covering same using woven fiber connectors

This invention relates to improvements in the method by which elongate frame elements such as the spars in aircraft wings are fastened to the skin panels covering same where these skin pane]s are of the sandwich type having inner and outer facesheets with a core bonded therebetween, such method consisting of preparing the panel to receive its frame elements by cutting elongate grooves spanwise through the inner facesheet and the core therebeneath while leaving the outer facesheet intact; bridging the gap thus produced in the inner facesheet with one bundle of filaments adhesively bonded thereto, the latter being contained in a woven connector in the form of a strap or band running lengthwise of the groove, and this filament bundle farming an endless strand of yarn that is laid back and forth transversely across the gap in side-by-side parallel rows but which are parted at intervals for the side-by-side lays of at least one other similar yarn strand to pass therebetween in intersecting relation; adhesive]y-bonding the skin panel core exposed within the groove to one or both sides of the frame element located proximal thereto using two endless strands of yarn laid back and forth to define a pair of intersecting webs arranged in spaced substantially parallel relation to one another that form a part of the connector and pass through the spaces between the first-mentioned yarn strands.

Paul J Jonas↗

NASA NTRS1991

Bidirectional drive and brake mechanism

A space transport vehicle is disclosed as including a body which is arranged to be movably mounted on an elongated guide member disposed in outer space and driven therealong. A drive wheel is mounted on a drive shaft and arranged to be positioned in rolling engagement with the elongated guide carrying the vehicle. A brake member is arranged on the drive shaft for movement into and out of engagement with an adjacent surface of the drive wheel. An actuator is mounted on the body to be manually moved back and forth between spaced positions in an arc of movement. A ratchet-and-pawl mechanism is arranged to operate upon movements of the actuator in one direction between first and second positions for coupling the actuator to the drive wheel to incrementally rotate the wheel in one rotational direction and to operate upon movements of the actuator in the opposite direction for uncoupling the actuator from the wheel. The brake member is threadedly coupled to the drive shaft in order that the brake member will be operated only when the actuator is moved on beyond its first and second positions for shifting the brake member along the drive shaft and into frictional engagement with the adjacent surface on the drive wheel.

Swan, Scott A.↗

NASA NTRS1990

The symmetry surface of the zodiacal cloud outside the earth's orbit

The location in space of the symmetry surface of the zodiacal cloud at elongation angles 110-140 deg from the sun is determined from observations of the zodiacal light taken from the Pioneer 10 space probe, and from the zodiacal light experiment on Skylab. The inclination and ascending node of the symmetry surface from the ecliptic plane are shown to be about 1.2 and 23 deg, respectively, closest to those of the orbital plane of Mars. These results are consistent with those obtained from IRAS at elongation angle of 90 deg from the sun.

Misconi, Nebil Y.↗

NASA NTRS1990

Computer simulation in template-directed oligonucleotide synthesis

It is commonly assumed that template-directed polymerizations have played a key role in prebiotic evolution. A computer simulation that models up to 33 competing reactions was used to investigate the product distribution in a template-directed oligonucleotide synthesis as a function of time and concentration of the reactants. The study focuses on the poly(C)-directed elongation reaction of oligoguanylates, and how it is affected by the competing processes of hydrolysis and dimerization of the activated monomer, which have the potential of severely curtailing the elongation and reducing the size and yield of the synthesized polymers. The simulations show that realistic and probably prebiotically plausible conditions can be found where hydrolysis and dimerization are either negligible or where a high degree of polymerization can be attained even in the face of substantial hydrolysis and/or dimerization.

Kanavarioti, Anastassia↗

NASA NTRS1991

Lidar observations of banded convection during BLX83

Lidar observations of clear-air convection during the 1983 Boundary Layer Experiment (BLX83) reveal the presence of elongated, parallel regions of updrafts marked by enhanced aerosol backscattering. These linear (banded) aerosol structures were observed over a 2-hr period during a cloud-free morning. During this period, the depth of the convective boundary layer (CBL) increased from 100 to 1300 m. Wind speeds averaged over the depth of the CBL varied between 0 and 2 m/s, while the wind direction varied over a range of 160 deg. The CBL instability parameter, -Zi/L, increased from approximately 25 (weakly unstable) to 250 (strongly unstable). The spacings of the elongated, parallel plumes scaled with the CBL height. These findings suggest that secondary circulations in the form of horizontal roll vortices were present under conditions not normally associated with roll vortices. The lines of aerosol structures aligned much more closely (within 15 deg) with the direction of the vertical shear to the horizontal wind through the depth of the CBL than with either the surface wind, mean CBL wind, or the wind at an altitude of 1.1 Zi.

Ferrare, R. A.↗

NASA NTRS1990

IPS limits on very low frequency VLBI

The ability of a space-based radio interferometer array to make high resolution images at frequencies of only a few MHz will be limited by interplanetary scintillation. Numerical simulations have been used to study the severity of interferometer phase fluctuations caused by the density fluctuations in the solar wind over a range of frequencies and solar elongation angles. The impact of these fluctuations on the quality of radio images produced has also been investigated. The results show that, for baselines up to 100 km, accurate imaging should be possible when nu sin (epsilon/2) is equal to or greater than 2.5, where nu is the observing frequency in MHz and epsilon is the solar elongation angle.

Jones, Dayton L.↗

NASA NTRS1991

Integral sunshade for an optical reception antenna

Optical reception antennas (telescopes) must be capable of receiving communications even when the deep-space laser source is located within a small angle of the sun. Direct sunlight must not be allowed to shine on the primary reflector of an optical reception antenna, because too much light would be scattered into the signal detectors. A conventional sunshade that does not obstruct the antenna aperture would have to be about five times longer than its diameter in order to receive optical communications at a solar elongation of 12 degrees without interference. Such a long sunshade could not be accommodated within the dome of any existing large-aperture astronomical facility, and providing a new dome large enough would be prohibitively expensive. It is also desirable to reduce the amount of energy a space-based large-aperture optical reception facility would expend orienting a structure with such a sizable moment of inertia. Since a large aperture optical reception antenna will probably have a hexagonally segmented primary reflector, a sunshade consisting of hexagonal tubes can be mounted in alignment with the segmentation without producing any additional geometric obstruction. An analysis of the duration and recurrence of solar-conjunction communications outages (caused when a deep-space probe near an outer planet appears to be closer to the sun than a given minimum solar elongation), and the design equations for the integral sunshade are appended.

Kerr, Edwin L.↗

NASA NTRS1991

Morphology and evolution of coronae and ovoids on Venus

Coronae and ovoids on Venus were first identified in Venera 15/16 data. They are distinctive and apparently unique to the planet, and may be important indicators of processes operating in the Venusian mantle. Magellan images have provided the first high resolution views of coronae and ovoid morphology. Herein, the general geologic character is described of coronae and ovoids, and some inferences are drawn about their geologic evolution. Coronae are circular to elongate features surrounded by an annulus of deformational features, with a relatively raised or indistinct topographic signature and, commonly, a peripheral trough or moat. Ovoids are circular to elongate features other than coronae with either positive or negative topographic signatures, associated with tectonic deformation and volcanism. The relationship of these two geologic features to each other and to Venusian geology is briefly discussed.

Squyres, Steven W.↗

NASA NTRS1991

Generation of field-aligned current in the auroral zone

Generation of a magnetic field-aligned current in the auroral zone connecting the magnetospheric and ionospheric plasmas has been studied by means of a three dimensional particle simulation model. The model is of a magnetostatic variety appropriate for a low beta plasma in which the high frequency transverse displacement current has been eliminated. The simulation model is highly elongated along the magnetic field lines in order to model a highly elongated flux tube in the auroral zone. An enhanced field-aligned current was generated by injection of a magnetospheric plasma across the auroral zone magnetic field at the center of the model. Such a plasma injection may correspond to a plasmoid injection at the geomagnetic tail associated with magnetic reconnection during a substorm or a transverse plasma flow along the low latitude magnetopause boundary layer. The results of the simulations show that the field-aligned current can be enhanced over the thermal current by a factor of 5 - 10 via such injection. Associated with the enhanced current are the electrostatic ion cyclotron waves and shear Alfven waves excited in the auroral zone.

Okuda, Hideo↗

NASA NTRS1992

The role of calcium and calmodulin in the response of roots to gravity

There is general agreement that, in roots, the primary detection of the gravitropic signal occurs in the columella cells of the cap and that this results in the generation of a signal that moves into the elongation zone causing the asymmetric growth that leads to downward curvature. Recent work has generated considerable evidence that indicates that auxin is the ultimate mediator of differential growth during root (and shoot) gravitropism. Our studies of the time course of curvature, auxin redistribution and/or adaptation, and electrical potential changes in maize roots have led to the following generalizations: (1) downward curvature begins 18 to 32 min following gravistimulation; (2) asymmetric auxin redistribution across the root cap begins at about the same time as curvature or perhaps slight earlier; (3) there is a lag of approx. 15 min in the response of roots to applied auxin; and (4) gravi-induced changes in intracellular potentials of cortical cells within the elongation zone occur within 30 s following stimulation.

Evans, Michael L.↗

NASA NTRS1992

Quick-connect fasteners for assembling devices in space

A quick-connect fastener of a relatively-simple straightforward design is arranged with a tubular body adapted to be engaged against an attachment fitting in coincidental alignment with an opening in that fitting. A tubular collet having flexible finger projecting from its forward end is arranged in the fastener body to be shifted forwardly by an elongated expander member coaxially arranged within the tubular collet for advancing the collet fingers into the opening in the attachment fitting. Biasing means are arranged between the elongated expander member and a rotatable actuator which is threadedly mounted within the tubular collet so as to be rotated for urging the expander member into engagement with the collet fingers. A first coupling member is arranged on the rotatable actuator to be accessible from outside of the fastener so that a second coupling member on the distal end of a flexible shaft can be introduced into the fastener body and coupled to the first coupling member to enable a typical actuating tool coupled to the shaft outside of the fastener body to be operated for advancing the outwardly-enlarged ends of the collet fingers into the opening in the attachment fitting and thereafter rotating the actuator member to expand the fingers to that attachment fitting. Upon expansion of the collet fingers, the biasing means impose a biasing force on the expander to releasably retain the fingers in their latching positions.

Wesselski, Clarence J.↗

NASA NTRS1992

The radio source and bipolar nebulosity in the Seyfert galaxy NGC 3516

Results of radio continuum and optical emission-line observations of the type 1 Seyfert galaxy NGC 3516 are presented. The radio maps reveal an elongated one-sided curved structure, which comprises a series of small-scale 'blobs' and extends up to 4 kpc from the nucleus. This radio structure is aligned and cospatial with one side of the double-sided and highly symmetric Z-shaped emission-line structure. It is argued that these morphological features are associated with a bipolar gaseous outflow from the nucleus of NGC 3516. The radio 'blobs' are elongated roughly perpendicular to the apparent local direction of the outflow, a result which is interpreted in terms of synchrotron emission from outflow-driven shock waves.

Miyaji, Takamitsu↗

NASA NTRS1991

Real-time control of geometry and stiffness in adaptive structures

The basic theory is presented for the geometry, stiffness, and damping control of adaptive structures, with emphasis on adaptive truss structures. Necessary and sufficient conditions are given for stress-free geometry control in statically determinate and indeterminate adaptive discrete structures. Two criteria for selecting the controls are proposed, and their use in real-time control is illustrated by numerical simulation results. It is shown that the stiffness and damping control of adaptive truss structures for vibration suppression is possible by elongation and elongation rate dependent feedback forces from the active elements.

Ramesh, A. V.↗

NASA NTRS1992

The effect of geometry and incomplete sampling on peculiar velocity in superclusters

Two simple geometries, including observational effects such as orientation and incomplete sampling have been examined to determine the relative contributions of geometry and peculiar velocity to the elongation in the redshift direction seen in studies of superclusters. It is found that a loop with a redshift cutoff produces an elongation in the redshift direction in the range of 250-1000 km/s. Since Bahcall (1987) found approximately 2000 km/s in peculiar velocity, it is concluded that up to 50 percent of the observed peculiar velocity could be due to incomplete sampling of a loop geometry.

Henriksen, Mark J.↗

NASA NTRS1992

Estimation of crack closure stresses for in situ toughened silicon nitride with 8 wt pct scandia

An 8-wt pct-scandia silicon nitride with an elongated grain structure was fabricated. The material exhibited high fracture toughness and a rising R-curve as measured by the indentation strength technique. The 'toughening' exponent m was found to be m about 0.1. The high fracture toughness and R-curve behavior was attributed mainly to bridging of the crack faces by the elongated grains. The crack closure (bridging) stress distribution in the wake region of the crack tip was estimated as a function of crack size from the R-curve data, with an arbitrarily assumed distribution function.

Choi, Sung R.↗