Search NASA⌕ Search

SEARCH · Search NASA

Results for “Electroplating”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Characterization of 235 U, 238 U and 239 Pu fission ionization chamber foils by α and γ -ray spectrometry

The masses of thin, electroplated deposits of 235 U, 238 U and 239 Pu on titanium backings have been determined to better than 1.3% precision by employing three complementary measurement techniques: $\alpha$ spectrometry, 2$\pi$ gas counting, and $\gamma$-ray spectrometry. A dedicated $\alpha$ spectrometer was designed and calibrated to allow for repeatable, high-precision measurements of the absolute $\alpha$ activity of a sample. The isotopic composition of the sample was determined by fitting the peaks in the $\alpha$ spectrum, a technique which was demonstrated to be generally consistent with mass spectrometry. Independently, the total activity of the deposits were measured in a 2$\pi$ gas flow proportional counter. A detailed study of the effects of $\alpha$ particle straggling in the actinide deposit and $\alpha$ particle recoil off the sample backing material was performed. The masses of these actinide deposits were also measured via $\gamma$-ray spectrometry. Here, we found that all three systematically independent techniques produced consistent results, and could be combined into a weighted average with further reduced uncertainty. The mass ratios of these actinide deposits were determined to better than 1% precision via $\alpha$ spectrometry, enabling high-precision fission cross section ratio measurements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Abnormal grain growth in ultrafine grained Ni under high-cycle loading

Abnormal grain growth can occur in polycrystalline materials with only a fraction of grains growing drastically to consume other grains. We report abnormal grain growth in ultrafine grained metal in a rarely explored high-cycle loading regime at ambient temperature. Abnormal grain growth is observed in electroplated Ni microbeams with average initial grain sizes less than 640 nm under a large number of loading cycles (up to 109) with low strain amplitudes (< 0.3%). Such abnormal grain growth occurs predominantly in the family of grains whose <100> orientation is along the tensile/compressive loading direction. Micromechanics analysis suggests that the elastic anisotropy of grains dictates the thermodynamic driving force of abnormal grain growth, such that the lowest strain energy density of the <100> oriented grain family dominates grain growth. This work unveils a unique type of abnormal grain growth that may be harnessed to tailor grain microstructures in materials.

36 MATERIALS SCIENCE↗

Electrification and decarbonization of spent Li-ion batteries purification by using an electrochemical membrane reactor

The expanding electric vehicle market brings with it exponential growth in the use of lithium (Li)-ion batteries (LIB) for which a wave of spent LIB is expected to come within the next 5 to 10 years. Due to the economic and strategic value imbedded within the metals contained in LIB, different recycling technologies, including hydrometallurgy, pyrometallurgy and direct recycling, are under development. Being different from previous hydrometallurgical methods, which may have high chemical consumption and negative environmental impact, an electrochemical membrane reactor is designed and validated for the first time, to electrify and decarbonize the impurity removal process. This reactor electroplates copper (Cu) and electrochemically precipitates aluminum (Al) and iron (Fe) from simulated spent LIB leachates, by consuming only air, water, and electricity, and the impurities are reduced to <1 ppm. The purified leachate maintains 99.5 % of the nickel (Ni), 95.4 % of the cobalt (Co) and 99.14 % of manganese (Mn) from the original leachate solution, and then can be directly applied for cathode precursor synthesis. Additionally, the purification process doesn’t introduce extra impurity, and the reactor restoration process generates valuable by-product hydro sulfate (H2SO4). This electrochemical process can reduce the cost, because of the much less chemical consumption and the valuable by-product generation, and mitigates the waste emissions, because of no extra impurity introduced and no greenhouse gas (GHG) produced. In conclusion, the chemical precipitation method uses significant amount of NaOH, which induced GHG emission during the manufacturing process.

25 ENERGY STORAGE↗

Trapezoidal grid fingers to reduce shadowing loss and improve short circuit current

Traditional metallic contacts on solar cells can cover a substantial portion of the device area, resulting in shadowing of light that diminishes the amount of current collected. In this paper, we developed trapezoidal electron-beam evaporated Ti/Al front grid fingers on GaAs single-junction solar cells to decrease the optical shadowing and increase the photogenerated current. Here, we observe a high fill factor of 87% at 1-Sun light intensity and we observe no degradation on the open-circuit voltage. The short-circuit current density is found to increase by 0.4 mA/cm 2 when compared to previously demonstrated electroplated Ni/Au front grid fingers, resulting in an efficiency improvement of ~0.8% absolute.

14 SOLAR ENERGY↗

Bio-processing of solid wastes and secondary resources for metal extraction - A review

Highlights: Black-Right-Pointing-Pointer Review focuses on bio-extraction of metals from solid wastes of industries and consumer goods. Black-Right-Pointing-Pointer Bio-processing of certain effluents/wastewaters with metals is also included in brief. Black-Right-Pointing-Pointer Quantity/composition of wastes are assessed, and microbes used and leaching conditions included. Black-Right-Pointing-Pointer Bio-recovery using bacteria, fungi and archaea is highlighted for resource recycling. Black-Right-Pointing-Pointer Process methodology/mechanism, R and D direction and scope of large scale use are briefly included. - Abstract: Metal containing wastes/byproducts of various industries, used consumer goods, and municipal waste are potential pollutants, if not treated properly. They may also be important secondary resources if processed in eco-friendly manner for secured supply of contained metals/materials. Bio-extraction of metals from such resources with microbes such as bacteria, fungi and archaea is being increasingly explored to meet the twin objectives of resource recycling and pollution mitigation. This review focuses on the bio-processing of solid wastes/byproducts of metallurgical and manufacturing industries, chemical/petrochemical plants, electroplating and tanning units, besides sewage sludge and fly ash of municipal incinerators, electronic wastes (e-wastes/PCBs), used batteries, etc. An assessment has been made to quantify the wastes generated and its compositions, microbes used, metal leaching efficiency etc. Processing of certain effluents and wastewaters comprising of metals is also included in brief. Future directions of research are highlighted.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Maintaining a Flat Li Surface during the Li Stripping Process via Interface Design

Electroplating has been the main focus in mitigating the dendrite growth on the Li-metal electrode; however, the stripping process is equally critical, since the nonsmooth Li surface during stripping will lead to nonuniform local current density, planting the seeds for dendrite growth. In this paper, density functional theory (DFT) and kinetic Monte Carlo (KMC) techniques were combined to investigate the vacancy evolution in Li interfaced with different solid–electrolyte interphase (SEI) materials. It was found that the lithiophilic interface, such as Li/Li 2 O, repels vacancies into the bulk Li, so Li atoms can quickly fill the Li vacancies near the Li/Li 2 O interface and maintain a smooth Li surface. In contrast, the lithiophobic interface, such as Li/LiF, traps Li vacancies toward the interface, and the accumulated Li vacancies form voids and roughen the surface. The predicted critical stripping current density, below which a smooth Li surface will be maintained, is therefore much faster at the lithiophilic interface than that at the lithiophobic interface. It was further revealed that the lithiophilicity at different SEI or coating materials can be ranked as Li/Li 2 O > Li/LiPON > Li/Li 2 CO 3 > Li/LiF based on the calculated interfacial adhesion and accumulation of electron density at the interface. Furthermore, this suggests that interface and coating design at nanoscale can be effective for maintaining a smooth Li surface during the stripping process, solving another challenge to achieving a dendrite-free Li-metal electrode in both liquid and solid electrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Third Generation Potentially Bifunctional Trithiol Chelate, Its nat,1XX Sb(III) Complex, and Selective Chelation of Radioantimony ( 119 Sb) from Its Sn Target

The therapeutic potential of the Meitner-Auger- and conversion-electron emitting radionuclide 119 Sb remains unexplored because of the difficulty of incorporating it into biologically targeted compounds. To address this challenge, we report the development of 119 Sb production from electroplated tin cyclotron targets and its complexation by a novel trithiol chelate. Here, the chelation reaction occurs in harsh solvent conditions even in the presence of large quantities of tin, which are necessary for production on small, low energy (16 MeV) cyclotrons. The 119 Sb-trithiol complex has high stability and can be purified by HPLC. The third generation trithiol chelate and the analogous stable nat Sb-trithiol compound were synthesized and characterized, including by single crystal X-ray diffraction analyses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cations Enhance Hydride Transfer to Noncatalytic Metals in Concentrated Alkaline Electrolytes

Alkali metal cations are known to influence the kinetics of the hydrogen evolution reaction (HER), acting as either promoters or inhibitors to the rate-determining step depending on the metal surface, local pH, and cation concentration. Despite the importance of concentrated electrolytes for commercial electrochemical cells, the impact of cations on the HER in concentrated alkaline environments (>1 M) and in mixed cation systems remains poorly understood. Here, this study quantifies the HER kinetics at polycrystalline metal surfaces (Pt, Au, Cu, and Fe) and the equilibrium solvation environment in pure and mixed alkali metal hydroxide electrolytes at concentrations up to 3.0 M. Kinetic analyses of Au, Cu, and Fe revealed a positive cation-concentration-effect that was primarily driven by changes to the charge transfer coefficient. Multinuclear NMR spectroscopy examined the solvation of H 2 O/OH – species and the alkali cations as a function of (mixed) alkali cation concentration(s), and demonstrated rapid exchange between solvent, hydroxide, and solvated cations. Together, these findings support models where HER kinetics on noncatalytic metal surfaces in strongly alkaline conditions are primarily governed by the average polarization and polarizability of the metal/solution interface and that increasing cation activity continues to increase the transfer coefficient at metal-hydroxide concentrations up to 3.0 M. Electrolytes and additives which can outcompete weakly hydrated cations and disrupt the interfacial water structure are expected to suppress parasitic HER at electrodes for energy storage and electroplating.

Cations↗

Active Dendrite Suppression by Ferroelectric Membrane Separators in Rechargeable Batteries

Anodic dendrite formation is a critical issue in rechargeable batteries and often leads to poor cycling stability and quick capacity loss. Prevailing strategies for dendrite suppression aim at slowing down the growth rate kinetically but still leaving possibilities for dendrite evolution over time. Herein, we report a complete dendrite elimination strategy using a mesoporous ferroelectric polymer membrane as the battery separator. The dendrite suppression is realized by spontaneously reversing the surface energetics for metal ion reduction at the protrusion front, where a positive piezoelectric polarization is generated and superimposed as the protrusion compresses the separator. This effect is demonstrated first in a Zn electroplating process, and further in Zn–Zn symmetric cells and Zn–NaV 3 O 8 ·1.5H 2 O full cells, where the dendritic Zn anode surfaces are completely turned into featureless flat surfaces. Consequently, a substantially longer charging/discharging cycle is achieved. Furthermore, this study provides a promising pathway toward high-performance dendrite-free rechargeable batteries.

25 ENERGY STORAGE↗

Understanding the Polymorphism of Cobalt Nanoparticles Formed in Electrodeposition–An In Situ XRD Study

An advanced synchrotron-based in situ X-ray diffraction (XRD) technique is successfully developed and employed to track and monitor the formation and phase selection of cobalt (Co) in electrodeposition in real time and verify DFT computational results. The impacts of a number of controlling factors including the pH of the electrolyte and deposition overpotential are systematically studied. The results show that the yielded phase of the electrodeposited Co is controlled by both thermodynamics and kinetics. The low pH low overpotential condition favors the formation of the thermodynamically stable fcc phase. While the high pH high overpotential condition promotes the formation of the metastable hcp phase. The experimental results agree well with the nanometric phase diagram computed with DFT. Layer-by-layer alternative stacking of fcc-hcp polymorphic phases can be facilely fabricated by just varying the overpotential. This work not only offers an effective means to control the phase of electroplating of Co but also presents a new approach to reveal the fundamental insights of the formation of metals under electrochemical reduction driving force.

36 MATERIALS SCIENCE↗

Seeing through walls at the nanoscale: Microwave microscopy of enclosed objects and processes in liquids

Here, noninvasive in situ nanoscale imaging in liquid environments is a current imperative in the analysis of delicate biomedical objects and electrochemical processes at reactive liquid–solid interfaces. Microwaves of a few gigahertz frequencies offer photons with energies of ≈10 μeV, which can affect neither electronic states nor chemical bonds in condensed matter. Here, we describe an implementation of scanning near-field microwave microscopy for imaging in liquids using ultrathin molecular impermeable membranes separating scanning probes from samples enclosed in environmental cells. We imaged a model electroplating reaction as well as individual live cells. Through a side-by-side comparison of the microwave imaging with scanning electron microscopy, we demonstrate the advantage of microwaves for artifact-free imaging.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effects of helium implantation on the tensile properties and microstructure of Ni₇₃P₂₇ metallic glass nanostructures

We report fabrication and nanomechanical tension experiments on as-fabricated and helium-implanted ~130 nm diameter Ni₇₃P₂₇ metallic glass nano-cylinders. The nano-cylinders were fabricated by a templated electroplating process and implanted with He⁺ at energies of 50, 100, 150, and 200 keV to create a uniform helium concentration of ~3 at. % throughout the nano-cylinders. Transmission electron microscopy (TEM) imaging and through-focus analysis reveal that the specimens contained ~2 nm helium bubbles distributed uniformly throughout the nano-cylinder volume. In-situ tensile experiments indicate that helium-implanted specimens exhibit enhanced ductility as evidenced by a 2-fold increase in plastic strain over as-fabricated specimens, with no sacrifice in yield and ultimate tensile strengths. This improvement in mechanical properties suggests that metallic glasses may actually exhibit a favorable response to high levels of helium implantation.

36 MATERIALS SCIENCE↗

Solubility-mediated sustained release enabling nitrate additive in carbonate electrolytes for stable lithium metal anode

Here, the physiochemical properties of the solid-electrolyte interphase, primarily governed by electrolyte composition, have a profound impact on the electrochemical cycling of metallic lithium. Herein, we discover that the effect of nitrate anions on regulating lithium deposition previously known in ether-based electrolytes can be extended to carbonate-based systems, which dramatically alters the nuclei from dendritic to spherical, albeit extremely limited solubility. This is attributed to the preferential reduction of nitrate during solid-electrolyte interphase formation, and the mechanisms behind which are investigated based on the structure, ion-transport properties, and charge transfer kinetics of the modified interfacial environment. To overcome the solubility barrier, a solubility-mediated sustained-release methodology is introduced, in which nitrate nanoparticles are encapsulated in porous polymer gel and can be steadily dissolved during battery operation to maintain a high concentration at the electroplating front. As such, effective dendrite suppression and remarkably enhanced cycling stability are achieved in corrosive carbonate electrolytes.

25 ENERGY STORAGE↗

Enabling “lithium-free” manufacturing of pure lithium metal solid-state batteries through in situ plating

Abstract The coupling of solid-state electrolytes with a Li-metal anode and state-of-the-art (SOA) cathode materials is a promising path to develop inherently safe batteries with high energy density (>1000 Wh L −1 ). However, integrating metallic Li with solid-electrolytes using scalable processes is not only challenging, but also adds extraneous volume since SOA cathodes are fully lithiated. Here we show the potential for “Li-free” battery manufacturing using the Li 7 La 3 Zr 2 O 12 (LLZO) electrolyte. We demonstrate that Li-metal anodes >20 μm can be electroplated onto a current collector in situ without LLZO degradation and we propose a model to relate electrochemical and nucleation behavior. A full cell consisting of in situ formed Li, LLZO, and NCA is demonstrated, which exhibits stable cycling over 50 cycles with high Coulombic efficiencies. These findings demonstrate the viability of “Li-free” configurations using LLZO which may guide the design and manufacturing of high energy density solid-state batteries.

25 ENERGY STORAGE↗

Hybrid dynamic windows using reversible metal electrodeposition and ion insertion

Dynamic windows with electronically controlled transmission reduce glare without obstructing views while increasing the energy efficiency of buildings and automobiles via lighting, heating and cooling savings. Electrochromic materials, which change colour with voltage, are widely explored for use in dynamic windows, but they have not been extensively commercialized due to problems associated with colour, cost, switching speed and durability. Here, we develop a class of dynamic windows that combines reversible metal electrodeposition with ion insertion chemistry. These devices function through the reversible electroplating of Bi and Cu at the working electrode and Li+ insertion in a nickel oxide counter electrode. In one minute, 100 cm 2 windows uniformly switch between a clear state with 75% transmission and a colour-neutral black state possessing 10% transmission, which represents a significant improvement over previous metal-based architectures. We demonstrate that these hybrid windows cycle at least 4,000 times without degradation and are compatible with flexible substrates. Finally, we discuss how this approach can be used to design practical large-scale windows.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Heterogeneous doping via nanoscale coating impacts the mechanics of Li intrusion in brittle solid electrolytes

Lithium dendrite intrusion in solid-state batteries limits fast charging and causes short-circuiting, yet the underlying regulating mechanisms are not well-understood. Here, in this work, we discover that heterogeneous Ag + doping dramatically affects lithium intrusion into Li 6.6 La 3 Zr 1.6 Ta 0.4 O 12 (LLZO), a brittle solid electrolyte. Nanoscale Ag + doping is achieved by thermally annealing a 3-nm-thick metallic coating on LLZO, inducing Ag–Li ion exchange and Ag diffusion into grains and grain boundaries. Density functional theory calculations and experimental characterization show negligible impact on the electronic properties and surface wettability from Ag + incorporation. Mechanically, nanoindentation experiments show a fivefold increase in the mechanical force required to fracture the surface Ag + -doped LLZO, indicating substantial doping-induced surface toughening. Operando microprobe scanning electron microscopy experiments show that the Ag + -doped LLZO surface exhibits improved lithium plating at >250 mA cm −2 and an electroplating diameter that is expanded by over fourfold, even under an extreme indentation stress of 3 GPa. This demonstrates enhanced defect tolerance in LLZO, rather than electronic or adhesion effects. Our study reveals a chemo-mechanical mechanism via surface heterogeneous doping, complementing present bulk design rules to minimize mechanical failures in solid-state batteries.

36 MATERIALS SCIENCE↗

Magnetostructural phase transition in electroless-plated Ni nanoarrays

Ni nanoarrays were synthesized by electroless-plating and shaped by an anodic aluminum oxide template. The as-plated arrays exhibited superparamagnetic (SM) ordering resulting from nanocrystalline microstructure. Ferromagnetic (FM) ordering was found to be restored as the arrays' crystallinity was enhanced upon post-annealing. The microstructure (crystallinity) and the FM ordering are strongly coupled, revealing a magneto-structural correlation for the arrays. The magnetostructural properties of the arrays can be controlled by post-annealing, where the magnetization is proportional to the annealing temperature. The electroless-plated arrays synthesized in this work display magnetic anisotropy not found in electroplated ones. This is likely attributed to the nature of the clusterlike microstructure, whose cluster-boundaries may confine the FM rotation within the cluster. The spin-polarization was probed by x-ray magnetic circular dichroism while the arrays underwent the SM{yields}FM phase transition. The sum-rules results reveal that the total magnetization of the arrays is dominated by spin moment (m{sub spin}). The change in m{sub spin} is responsible for the SM{yields}FM phase transition upon annealing, as well as for the loss of magnetization upon temperature increase that we observed macroscopically.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Design for reliability of BEoL and 3-D TSV structures – A joint effort of FEA and innovative experimental techniques

Copper-TSVs for 3D-IC-integration generate novel challenges for reliability analysis and prediction, e.g. the need to master multiple failure criteria for combined loading including residual stress, interface delamination, cracking and fatigue issues. So, the thermal expansion mismatch between copper and silicon leads to a stress situation in silicon surrounding the TSVs which is influencing the electron mobility and as a result the transient behavior of transistors. Furthermore, pumping and protrusion of copper is a challenge for Back-end of Line (BEoL) layers of advanced CMOS technologies already during manufacturing. These effects depend highly on the temperature dependent elastic-plastic behavior of the TSV-copper and the residual stresses determined by the electro deposition chemistry and annealing conditions. That’s why the authors pushed combined simulative/experimental approaches to extract the Young’s-modulus, initial yield stress and hardening coefficients in copper-TSVs from nanoindentation experiments, as well as the temperature dependent initial yield stress and hardening coefficients from bow measurements due to electroplated thin copper films on silicon under thermal cycling conditions. A FIB trench technique combined with digital image correlation is furthermore used to capture the residual stress state near the surface of TSVs. The extracted properties are discussed and used accordingly to investigate the pumping and protrusion of copper-TSVs during thermal cycling. Moreover, the cracking and delamination risks caused by the elevated temperature variation during BEoL ILD deposition are investigated with the help of fracture mechanics approaches.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗