Search NASA⌕ Search

SEARCH · Search NASA

Results for “Eutectics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Natural deep eutectic solvents (NADES) assisted deconstruction of oilcane bagasse for high lipid and sugar recovery

In a novel approach, metabolically engineered sugarcane “Oilcane” has been investigated for fractionation of lipid and cellulose-rich pulp, using certain Natural deep eutectic solvents (NADES). The exploration of eco- friendly solvents are at the forefront of harnessing the biofuel potential of modern bioenergy crops. For this, six combinations of NADES were prepared using choline chloride (ChCl) as HBA and lactic acid (LA), oxalic acid (OA) and glycerol (Gly) as HBD and were further explored for pretreatment of oilcane bagasse in a molar ratio of 1:1 and 1:2. The impact of NADES ratio, biomass loading (10–50%), residence time (1–2 h), and temperature (90–140 °C) were evaluated for delignification, lipid content, sugar release after enzymatic hydrolysis. The finding demonstrated that under the optimal condition of ChCl: LA (1:2 molar ratio), 140 °C with 2 h retention time, the lipid content in the pre-treated substrate was increased to 2.5-fold (~8% w/w) and > 80% glucose yield was achieved after 72 h of hydrolysis of pre-treated bagasse. High solid loading (~50%) during pretreatment resulted in a similar glucose yield. Furthermore, recycling studies demonstrated that nearly 95 to 98% NADES could be recycled after each pretreatment for up to five consecutive cycles without any significant loss in chemical structure as confirmed by 1 H NMR and FT IR. FT IR and XRD analyses of native and pre-treated biomass were performed to visualize the morphological changes during NADES pretreatment and their impact on sugar yield. The findings of the study may be used to establish NADES-based biorefinery for the valorization of lipids, and carbohydrates for fuels and chemicals production.

09 BIOMASS FUELS↗
DOE OSTI2021

Influence of fine-scale B2 precipitation on dynamic compression and wear properties in hypo-eutectic Al0.5CoCrFeNi high-entropy alloy

The near equiatomic high-entropy alloys based on Al, Co, Cr, Fe, Ni have provided a novel microstructural template for alloy design. The face-centered cubic (FCC) matrix strengthened by body-centered cubic (BCC) based ordered B2 precipitates can be used to develop a new generation of precipitation strengthened alloys. The present study focuses on an Al0.5CoCrFeNi hypo-eutectic alloy consisting of an as-solidified FCC+B2 microstructure. Guided by solution thermodynamic modeling, this alloy has been isothermally aged for solid-state precipitation of a high fraction of fine-scale intragranular B2 particles. The dynamic compressive strength, hardness, and sliding wear response of the alloy as a function of B2 phase fraction is examined. The flow stress at 0.02% true strain increased from ~ 670 MPa to ~1350 (102%) MPa, the ultimate compressive strength increased from ~1160 MPa to 1500 MPa (20%), and the wear resistance increased more than 5 times with progressively increasing phase fraction of B2 precipitates.

Gwalani, Bharat↗
DOE OSTI2023

Effect of Mn on eutectic phase equilibria in Al-rich Al-Ce-Ni alloys

Microstructural analysis of additively manufactured (AM) Al-Ce-Ni-Mn alloys has identified phases not predicted from existing ternary liquidus projections in the Al-Ce-Ni system. Because the rapid cooling rate of AM is orders of magnitude above that of traditional casting, it is unclear if these additional phases arose from the non-equilibrium processing conditions of AM, a drastic shift in phase stability in the system due to the addition of 1 wt% Mn, or some combination of these two influences. The phases and microstructure of cast samples of Al-Ce-Ni and Al-Ce-Ni-Mn alloys were characterized for several annealing conditions which revealed the equilibrium phases at different temperatures. Phase analysis confirmed that minute levels of Mn substituted for Ni in the system drastically shifts the liquidus projection in the Al-rich corner of the ternary phase diagram such that the eutectic Al 3 Ni phase is suppressed in favor of the Al 23 Ni 6 (Ce,Mn) 4 phase. Further addition of Mn promotes the formation of Al 20 Mn 2 Ce and Al 10 Mn 2 Ce phases. The phase analysis data was then used to improve the CALPHAD modeling of the liquidus projection and isothermal sections for the Al-rich Al-Ce-Ni-Mn quaternary system. Thermodynamic modeling and experimental analysis on phases in the AM sample of Al-Ce-Ni with Mn confirmed that the phases present are consistent with Mn-containing Al-Ce-Ni cast samples. Here, this investigation demonstrates the potential for using secondary alloying elements to drastically alter phase stability and microstructure in alloy systems.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Temperature and anion ligand field dependence of LnCl 3 (Ln = Nd, Dy, Sm) electronic absorption spectra in LiCl–KCl eutectic molten salt

A comprehensive knowledge of the coordination, bonding, and speciation of elements in molten salt mixtures is necessary to understand and predict the chemical and physical properties of the salt. Absorption spectroscopy can yield information about the chemistry of species of interest in alkali halide molten salt mixtures by revealing information about the electronic structure and transitions of those species. In this study, ultraviolet (UV), visible (vis), and near-infrared (NIR) absorption spectroscopy was used to examine changes to the electronic structure of trivalent Nd, Sm, and Dy in LiCl–KCl eutectic molten salt with changes in temperature and the anion composition of the melt. With increasing temperature, changes to spectral features suggest a distortion of the coordination complexes. Changes to lineshape with the substitution of alternative halide anions were examined and analyzed, revealing differences in the coordination for I – versus F – with the lanthanides. Gaussian peak fitting was used to show that the changes in lineshape with the progressive addition of F – anions can be explained by the superposition of a set of absorption bands from complexes with all Cl – anion ligands and a set of blueshifted absorption bands from complexes containing both F – and Cl – anion ligands. Finally, this work yields a new method to analyze and interpret change to electronic absorption spectra for f-block elements dissolved in alkali halide molten salts as well as new observations of the interactions of larger and smaller halide anions with lanthanides in Cl – -based molten salts.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Eutectic melting of alloy microparticles upon low velocity impact

Although impact melting has been quantified in a number of pure metals, alloyed microparticles have access to low melting-point eutectics that can promote earlier melting. Through real-time monitoring of single particle impacts resolved at the nanosecond- and micron-scales, we explore the impact melting of AA7075 from high velocities, where it is abundant and clear, to velocities as low as ∼269 m/s. Here, by using a hard substrate to isolate the deformation largely to the particle, we show that the adiabatic heat produced by the plasticity of the impact can explain the onset of melting at low velocity.

Additive manufacturing↗
DOE OSTI2024

Anhydrous volatile fatty acid extraction through omniphobic membranes by hydrophobic deep eutectic solvents: Mechanistic understanding and future perspective

Volatile fatty acids (VFAs) derived from arrested anaerobic digestion (AD) can be recovered as a valuable commodity for value-added synthesis. However, separating VFAs from digestate with complex constituents and a high-water content is an energy-prohibitive process. This study developed an innovative technology to overcome this barrier by integrating deep eutectic solvents (DESs) with an omniphobic membrane into a membrane contactor for efficient extraction of anhydrous VFAs with low energy consumption. Here, a kinetic model was developed to elucidate the mechanistic differences between this novel omniphobic membrane-enabled DES extraction and the previous hydrophobic membrane-enabled NaOH extraction. Experimental results and mechanistic modeling suggested that VFA extraction by the DES is a reversible adsorption process facilitating subsequent VFA separation via anhydrous distillation. High vapor pressure of shorter-chain VFAs and low Nernst distribution coefficients of longer-chain VFAs contributed to DES-driven extraction, which could enable continuous and in-situ recovery and conversion of VFAs from AD streams.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Scanning Electrochemical Microscopy for Kinetic Investigations in Viscous Deep Eutectic Solvents: Identifying Practical Approach Curves and Deviations from Electron Transfer Models

Determining heterogeneous electrochemical electron transfer (ET) kinetics in electrolytes with a wide range of physical properties is of great interest for achieving high-performance redox flow batteries. Among such electrolytes, concentrated hydrogen-bonded electrolytes (CoHBEs), including deep eutectic solvents (DESs), have recently garnered significant attention. Unfortunately, traditional Tafel analysis using macroelectrodes often encounters issues with mass transfer limitations in CoHBEs with high viscosities, thereby restricting kinetic analysis to a narrow potential window. Here, in this work, we introduce a methodology for evaluating ET kinetics in viscous DES using the scanning electrochemical microscopy (SECM). We first determined practical solutions to SECM tip positioning in ethaline DES, which yield pseudopositive feedback responses. Lattice Boltzmann method (LBM) simulations helped us rationalize the impact of the fluid and concentration fields, as well as tip geometry, tip approach velocity v, and the solvent viscosity ηs, on the shape of the approach curves. In addition to successfully recreating approach curves over a variety of conditions, we found that approaching a conductor ensured a practical point where the normalized tip response (Ni T = 2) converged at L = 0.7 within ∼10% error regardless of tip velocity. With positioning capabilities at hand, we investigated the kinetics of Fe 3+ /Fe 2+ redox couple in aqueous and the ethaline media. The experimental kinetic results were interpreted using the Butler–Volmer (BV) and Marcus–Hush–Chidsey (MHC) models. For ethaline, a nonideal kinetic behavior was observed, potentially attributed to solvent dynamics within DESs or to the interplay of chloride anions in the charge transfer process.

electrodes↗
DOE OSTI2021

Local Structural Disorder in Metavanadates MV 2 O 6 (M = Zn and Cu) Synthesized by the Deep Eutectic Solvent Route: Photoactive Oxides with Oxygen Vacancies

Metavanadates MV 2 O 6–δ (M = Zn and Cu) are synthesized by using a deep eutectic solvent (DES), a mixture of hydrogen bond donor and acceptor, as a reaction medium. Dissolution of stable binary metal oxides in a DES followed by a heat treatment yields phase-pure vanadates. According to in situ powder X-ray diffraction, ternary phases (α-Zn 2 V 2 O 7 and β-Cu 2–x V 2 O 7 , x ~ 0.27) are intermediates in the reaction pathway taken. Identifying a polymorphic phase transformation temperature for CuV 2 O 6 as well as the narrow temperature range between formation and decomposition for both metavanadates allows for tackling the challenge of the synthesis of these materials. The oxygen vacancy introduced by the DES route is accompanied by the formation of reduced V 4+ and Cu + in the oxide matrix, based on X-ray photoelectron spectroscopy. These oxygen vacancies modify the vibrational modes in the corresponding Raman spectra and are also responsible for broad optical absorptions in the 1.8–1.1 eV range. The optical band gaps of the materials are found at 1.8 eV (CuV 2 O 6 ) and 2.2 eV (ZnV 2 O 6 ), approximately 0.1–0.3 eV below the values reported in the literature. The reduced band gaps and sub-band gap photon absorption are key features of the oxygen-deficient metavanadates. Surface photovoltage spectroscopy reveals that all the synthesized vanadates are n-type materials with electrons as the majority charge carriers, and photoelectrochemical measurements confirm photoanodic currents for methanol oxidation. Furthermore, these results provide insight into the synthesis and structure–property relationship of the metavanadates for their potential use as photoanodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Deep Eutectic Solvents for Pretreatment of Lignocellulose Biomass: Physical Properties, Solubility Mechanisms, and Their Interactions

As the most accessible and abundant renewable resource on earth, lignocellulosic biomass mainly consists of cellulose, hemicelluloses, and lignin with a small amount of protein, pectin, minerals, and extractives (e.g., tannins, lipids, and resins). Lignocellulosic biomass has gained extensive attention in industry and research owing to its renewability, availability, and low cost. However, achieving efficient fractionation of lignocellulose components and all-component utilization in a green and cost-effective manner remains a challenge dueto biomass recalcitrance. Deep eutectic solvents (DESs) have received considerable attention because they are biocompatible, inexpensive, biodegradable, have low toxicity, and are easy to prepare and recycle; these characteristics strongly depend on individual components involved in DESs preparation. This review systematically summarizes recent progress in the fractionation of carbohydrates (cellulose and hemicelluloses) and lignin from biomass using DESs, with particular emphasis on the effects of DES types and pretreatment parameters on fractionation efficiency. The subsequent conversion and upgrading of the DES-fractionated products (i.e., carbohydrates and lignin) are comprehensively analyzed. Finally, the challenges and future prospects of lignocellulose biomass fractionation using DESs are proposed in view of the existing limitations. This review provides an in-depth understanding of lignocellulose biomass fractionation during DESs processing, offering insights to improve current pretreatment methods and/or to explore new pretreatment methods aimed at mitigating the global energy crisis.

Mqoni, Ntebogeng [North-West University (Mafikeng ↗
DOE OSTI2024

Impacts of Hydrogen Bond Donor Structures in Phenolic Aldehyde Deep Eutectic Solvents on Pretreatment Efficiency

As a green solvent for biomass processing, deep eutectic solvents (DESs) have shown effectiveness in biomass processing. Here, in this study, phenolic aldehydes with different numbers of methoxy groups, including 4-hydroxybenzaldehyde (HBA, no methoxy), vanillin (VA, monomethoxy), and syringaldehyde (SA, dimethoxy) were employed to synthesize DESs with choline chloride (ChCl). The presence of methoxy groups in the hydrogen bond donor structure affected DES properties, as well as biomass pretreatment performance. The high thermal stability of phenolic aldehyde DESs was shown with over 225 °C onset temperature. The hydrogen bond donor with one aldehyde and one hydroxyl group at the para position without a methoxy group (ChCl-HBA) showed the highest xylan removal and delignification, reaching 59.3 and 88.0%, respectively, leading to the highest enzymatic hydrolysis yield. Sonication after pretreatment further enhanced the hydrolysis yields, achieving 83.3% glucan conversion and 50.1% xylan conversion. In the lignin-rich fraction, the recovered lignin showed a low weight–average molecular weight under 2100 g/mol with a relatively uniform molecular weight dispersity below 1.5. This study provides insights into how the chemical structure of hydrogen bond donors in DESs affects biomass processing and paves the way for designing effective lignin-derived DES in future biorefinery processes.

09 BIOMASS FUELS↗
DOE OSTI2023

A Membrane Contactor Enabling Energy-Efficient CO 2 Capture from Point Sources with Deep Eutectic Solvents

We demonstrate a scalable and energy-efficient hollow fiber membrane contactor (HFMC)-based process using a green solvent for CO 2 capture. This process uses a deep eutectic solvent (DES) in an HFMC to provide close interfacial interactions and contact between the DES and CO 2 . This approach overcomes disadvantages associated with direct absorption in DES and could potentially be applied to a variety of solvent-based CO 2 capture methods. Commercial low-cost polymer hollow fiber membranes (e.g., microporous polypropylene) were evaluated for CO 2 capture with reline, a prototypical DES. Single-gas measurements showed that the DES-based polypropylene HFMC can capture and separate CO 2 while rejecting N2. From a mixed gas containing 50 mol % N 2 and 50 mol % CO ν , the DES-based HFMC separated CO 2 with a purity of 96.9 mol %. The effect of several process parameters including solvent flow rate, pressure, and temperature on the CO 2 separation performance was studied. The flux of the recovered CO 2 was 67.43 mmole/m 2 /h at a feed pressure of 4 bar. In situ Fourier transform infrared (FTIR) measurements combined with density functional theory (DFT)-based molecular dynamics simulations revealed that reline absorbs CO 2 by physical absorption without forming a new chemical compound, and CO 2 separation by reline occurs via the pressure swing mechanism. This research provides fundamental insights about physical solvent-based separation processes and a pathway toward practical deployment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Accurate Machine Learning for Predicting the Viscosities of Deep Eutectic Solvents

Deep eutectic solvents (DESs) are emerging as environmentally friendly designer solvents for mass transport and heat transfer processes in industrial applications; however, the lack of accurate tools to predict and thus control their viscosities under both a range of environmental factors and formulations hinders their general application. While DESs may serve as designer solvents, with nearly unlimited combinations, this unfortunately makes it experimentally infeasible to comprehensively measure the viscosities of all DESs of potential industrial interest. To assist in the design of DESs, we have developed several new machine learning (ML) models that accurately and rapidly predict the viscosities of a diverse group of DESs at different temperatures and molar ratios using, to date, one of the most comprehensive data sets containing the properties of over 670 DESs over a wide range of temperatures (278.15–385.25 K). Three ML models, including support vector regression (SVR), feed forward neural networks (FFNNs), and categorical boosting (CatBoost), were developed to predict DES viscosity as a function of temperature and molar ratio and contrasted with multilinear and two-factor polynomial regression baselines. Further, quantum chemistry-based, COSMO-RS-derived sigma profile (σ-profile) features were used as inputs for the ML models. The CatBoost model is excellent at externally predicting DES viscosity, as indicated by high R 2 (0.99) and low root-mean-square-error (RMSE) and average absolute relative deviations (AARD) (5.22%) values for the testing data sets, and 98% of the data points lie within the 15% of AARD deviations. Furthermore, SHapley additive explanation (SHAP) analysis was employed to interpret the ML results and rationalize the viscosity predictions. The result is an ML approach that accurately predicts viscosity and will aid in accelerating the design of appropriate DESs for industrial applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Copper Electrodeposition from Deep Eutectic Solvents—Voltammetric Studies Providing Insights into the Role of Substrate: Platinum vs Glassy Carbon

We report on the effect of the substrate on electrochemical deposition of Cu from deep eutectic solvent ethaline. We investigated the polarization behavior during electrodeposition of Cu on Pt and glassy carbon (GC) from both Cu 2+ and Cu + containing ethaline using cyclic voltammetry (CV). Formation of bulk Cu deposits on both substrates underwent nucleation and growth processes; however, the nucleation was considerably sluggish on GC compared to Pt. While experiments in Cu+ solutions indicated that coalescence of Cu islands on Pt is a slow process and that its surface may not be fully covered by Cu, such determination of Cu coverage could not be made on GC. Cu dissolution is also slower from GC than from Pt. It was observed that CV of Cu deposition on GC is influenced by the surface preparation method. Since ethaline has high chloride concentration, a parallel study in aqueous 3 M NaCl solution was conducted in order to examine the influence of the chloride medium on the electrodeposition process. Lastly, this revealed that electrodeposition in both media occurred in the same manner but with different charge and mass transfer rates caused by the differences in viscosity and chloride concentrations of the two solutions.

25 ENERGY STORAGE↗
DOE OSTI2020

From Salt in Solution to Solely Ions: Solvation of Methyl Viologen in Deep Eutectic Solvents and Ionic Liquids

Solvation and transport properties of methlyviologen dichloride in mixtures of choline chloride (ChCl) and ethylene glycol (EG) including the deep eutectic solvent (DES) ethaline were studied through physical property measurements, cyclic voltammetry, and Raman spectroscopy. The transport properties of the solvate structures in ethaline and ChCl:EG mixtures were compared to a well-studied ionic liquid (IL), 1-methyl-1-propylpyrrolidinium bis(trifluoromethylsulfonyl)imide, [PYR 13 ][TFSI] through the lens of hole theory. Here by exchanging the chloride anion of ethaline with bis(trifuoromethylsufonyl)imide) anion, [TFSI], is found to increase the fluidity of the solvent and promoted stronger solute-solvent interactions. Raman spectroscopy shows that methylviologen is solvated by EG in solutions with ChTFSI but interstitially accommodated in void spaces in both ChCl solutions and [PYR 13 ][TFSI]. Here, complex solvents such as DESs are regarded as “designer solvents” and we demonstrate that the physical properties and solvation characteristics of these fluids can be varied by anion exchange of hydrogen bond acceptors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Quantum Chemical Simulations of CO 2 and N 2 Capture in Reline, a Prototypical Deep Eutectic Solvent

Deep eutectic solvents such as reline are an emerging class of low-cost, environmentally friendly solvents with tunable properties that are potentially applicable for the capture and separation of CO 2 . Experimental measurements showed that a reline-based membrane contactor can capture and separate CO 2 via physisorption through a dissolution process with 96.7% purity from a mixed gas containing CO 2 and N 2 (50:50% molar ratio). Here, we examine the nature of the interaction of CO 2 and N 2 with reline employing quantum chemical methods. We focus on explaining the mechanism by which CO 2 and N 2 bind to reline and the reason for the high selectivity for absorption of CO 2 compared to N 2 . We analyze the dynamics, energetics, and binding motifs for CO 2 and N 2 in reline employing density functional theory, density functional tight binding, and ab initio molecular dynamics. We also investigate the effect of reline on the vibrational spectra of CO 2 and reline. Our simulations indicate that the selective capture of CO 2 from the mixture of CO 2 and N 2 is due to the interplay between attractive electrostatic and charge polarization forces with opposing entropic effects, which shift the energetic balance and make the N 2 absorption unfavorable in reline.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Role of Intermolecular Interactions in Deep Eutectic Solvents for CO 2 Capture: Vibrational Spectroscopy and Quantum Chemical Studies

Recent research and reviews on CO 2 capture methods, along with advancements in industry, have highlighted high costs and energy-intensive nature as the primary limitations of conventional direct air capture and storage (DACS) methods. In response to these challenges, deep eutectic solvents (DESs) have emerged as promising absorbents due to their scalability, selectivity, and lower environmental impact compared to other absorbents. However, the molecular origins of their enhanced thermal stability and selectivity for DAC applications have not been explored before. Therefore, the current study focuses on a comprehensive investigation into the molecular interactions within an alkaline DES composed of potassium hydroxide (KOH) and ethylene glycol (EG). Combining Fourier transform infrared (FT-IR) and quantum chemical calculations, the study reports structural changes and intermolecular interactions induced in EG upon addition of KOH and its implications on CO 2 capture. Experimental and computational spectroscopic studies confirm the presence of noncovalent interactions (hydrogen bonds) within both EG and the KOH-EG system and point to the aggregation of ions at higher KOH concentrations. Additionally, molecular electrostatic potential (MESP) surface analysis, natural bond orbital (NBO) analysis, quantum theory of atoms-in-molecules (QTAIM) analysis, and reduced density gradient-noncovalent interaction (RDG-NCI) plot analysis elucidate changes in polarizability, charge distribution, hydrogen bond types, noncovalent interactions, and interaction strengths, respectively. Evaluation of explicit and hybrid models assesses their effectiveness in representing intermolecular interactions. This research enhances our understanding of molecular interactions in the KOH-EG system, which are essential for both the absorption and desorption of CO 2 . The study also aids in predicting and selecting DES components, optimizing their ratios with salts, and fine-tuning the properties of similar solvents and salts for enhanced CO 2 capture efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Structural and Dynamic Heterogeneity of Deep Eutectic Solvents Composed of Choline Chloride and Ortho-Phenol Derivatives

Structural, thermal, and dynamic properties of four deep eutectic solvents comprising choline chloride paired with ortho-phenolic derivative hydrogen-bond donors were probed using experiments and molecular simulations. The hydrogen-bond donors include phenol, catechol, o-chlorophenol, and o-cresol, in a 3:1 mixture with the hydrogen-bond acceptor choline chloride. Density, viscosity, and pulsed-field gradient NMR diffusivity measurements were conducted over a range of temperatures. Classical and ab initio molecular dynamics simulation results match experimental data reasonably well. Furthermore, the simulation results were then used to perform a more detailed analysis of the local structure and dynamics of these systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Unraveling the Heterogeneous but Ordered Microstructure of the Nonionic Deep Eutectic Solvent Formed by Lauric Acid and N -Methylacetamide

The nonionic deep eutectic solvent, formed by lauric acid (LA) and N-methylacetamide (NMA), has been shown to have a heterogeneous molecular structure in which the LA and NMA form nonpolar and polar domains, respectively. Previous vibrational spectroscopy experiments demonstrated that the ability of the LA domains to solvate compounds was limited to long carbon chains, whereas other nonpolar molecules, such as W(CO) 6 , were found to be solvated by both LA and NMA. These experiments were not fully compatible with the previously proposed micelle-like structure of the nonpolar domains of the LA-NMA DES. In this work, the modeling of the DES molecular structure is pursued using classical molecular dynamics simulations. The new classical model reproduces both the SAXS structural factors and the previously experimentally derived interaction map for these LA-NMA DESs. In addition, the simulation also shows that LA-NMA DESs form highly organized LA aggregates that are difficult to disorganize. Further evidence of the correct description provided by the newly derived model is obtained using a moderately polar probe: chloroform-d. Computations using the classical model have a good agreement with the solvation behavior of the probe derived from experiments, in which the location of the probe is found to be mostly within the polar domain of the DES. The computational model also demonstrates that the probe solvation is a consequence of the tightly packed LA structure, which causes nonpolar molecules to be located at the interphase of the DES nonpolar domains.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗