SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The lack of absorption features in the transmission spectrum of exoplanet GJ1214b rules out a hydrogen-rich atmosphere for the planet. It is consistent with an atmosphere rich in water vapour or abundant in clouds.
We present the status update for the SEEDS Moving Groups category. To date, we have observed 59 targets and currently have more than 20 candidates. We also present the expected scientific capabilities of CHARIS, the Coronagraphic High Angular Resolution Imaging Spectrograph, which is being built for the Subaru 8.2 m telescope of the National Astronomical Observatory of Japan. CHARIS will be implemented behind the new extreme adaptive optics system at Subaru, SCExAO, and the existing 188-actuator system AO188. CHARIS will offer three observing modes over near~infrared wavelengths from 0.9 to 2.4 microns (the y-, J-, H-, and K-bands), including a low-spectral-resolution mode covering this entire wavelength range and a high-resolution mode within a single band. With these capabilities, CHARIS will offer exceptional sensitivity for discovering giant exoplanets, and will enable detailed characterization of their atmospheres, CHARIS, the only planned high-contrast integral field spectrograph on an 8m-class telescope in the Northern Hemisphere, will complement the similar instruments such as Project 1640 at Palomar, and GPI and SPHERE in Chile.
The Large Ultraviolet/Optical/Infrared (LUVOIR) Surveyor is one of four large strategic mission concept studies commissioned by NASA for the 2020 Decadal Survey in Astronomy and Astrophysics. Slated for launch to the second Lagrange point (L2) in the mid-to-late 2030s, LUVOIR seeks to directly image habitable exoplanets around sun-like stars, characterize their atmospheric and surface composition, and search for biosignatures, as well as study a large array of astrophysics goals including galaxy formation and evolution. Two observatory architectures are currently being considered which bound the trade-off between cost, risk, and scientific return: a 15-meter diameter segmented aperture primary mirror in a three-mirror anastigmat configuration, and an 8-meter diameter unobscured segmented aperture design. To achieve its science objectives, both architectures require milli-Kelvin level thermal stability over the optics, structural components, and interfaces to attain picometer wavefront RMS stability. A 270 Kelvin operational temperature was chosen to balance the ability to perform science in the near-infrared band and the desire to maintain the structure at a temperature with favorable material properties and lower contamination accumulation. This paper will focus on the system-level thermal designs of both LUVOIR observatory architectures. It will detail the various thermal control methods used in each of the major components - the optical telescope assembly, the spacecraft bus, the sunshade, and the suite of accompanying instruments - as well as provide a comprehensive overview of the analysis and justification for each design decision. It will additionally discuss any critical thermal challenges faced by the engineering team should either architecture be prioritized by the Astro2020 Decadal Survey process to proceed as the next large strategic mission for development.
The Large Ultraviolet/Optical/Infrared (LUVOIR) Surveyor is one of four large strategic mission concept studies commissioned by NASA for the 2020 Decadal Survey in Astronomy and Astrophysics. Slated for launch to the second Lagrange point (L2) in the mid-to-late 2030s, LUVOIR seeks to directly image habitable exoplanets around sun-like stars, characterize their atmospheric and surface composition, and search for biosignatures, as well as study a large array of astrophysics goals including galaxy formation and evolution. Two observatory architectures are currently being considered which bound the trade-off between cost, risk, and scientific return: a 15-meter diameter segmented aperture primary mirror in a three-mirror anastigmat configuration, and an 8-meter diameter unobscured segmented aperture design. To achieve its science objectives, both architectures require milli-Kelvin level thermal stability over the optics, structural components, and interfaces to attain picometer wavefront RMS stability. A 270 Kelvin operational temperature was chosen to balance the ability to perform science in the near-infrared band and the desire to maintain the structure at a temperature with favorable material properties and lower contamination accumulation. This paper will focus on the system-level thermal designs of both LUVOIR observatory architectures. It will detail the various thermal control methods used in each of the major components - the optical telescope assembly, the spacecraft bus, the sunshade, and the suite of accompanying instruments - as well as provide a comprehensive overview of the analysis and justification for each design decision. It will additionally discuss any critical thermal challenges faced by the engineering team should either architecture be prioritized by the Astro2020 Decadal Survey process to proceed as the next large strategic mission for development.
K2-25b is a Neptune-sized exoplanet (3.45R {sub ⊕}) that orbits its M4.5 host with a period of 3.48 days. Due to its membership in the Hyades Cluster, the system has a known age (727 ± 75 Myr). K2-25b’s youth and its similarities with Gl 436b suggested that K2-25b could be undergoing strong atmospheric escape. We observed two transits of K2-25b at Lyα using HST/STIS in order to search for escaping neutral hydrogen. We were unable to detect an exospheric signature, but placed an upper limit of (R {sub p}/R {sub ⋆})∣{sub Ly α} < 0.56 at 95% confidence by fitting the light curve of the Lyα red wing, or < 1.20 in the blue wing. We reconstructed the intrinsic Lyα profile of K2-25 to determine its Lyα flux, and analyzed XMM-Newton observations to determined its X-ray flux. Based on the total X-ray and extreme ultraviolet irradiation of the planet (8763 ± 1049 erg s{sup −1} cm{sup −2}), we estimated the maximum energy-limited mass-loss rate of K2-25b to be 10.6{sub −6.13}{sup +15.2}×10{sup 10} g s{sup −1} (0.56M {sub ⊕} per 1 Gyr), five times larger than the similarly estimated mass-loss rate of Gl 436b (2.2 × 10{sup 10} g s{sup −1}). The photoionization time is about 3 hr, significantly shorter than Gl 436b’s 14 hr. A nondetection of a Lyα transit could suggest K2-25b is not significantly losing its atmosphere, or factors of the system are resulting in the mass loss being unobservable (e.g., atmosphere composition or the system’s large high-energy flux). Further observations could provide more stringent constraints.
Several exoplanets have recently been imaged at wide separations of >10 AU from their parent stars. These span a limited range of ages (<50 Myr) and atmospheric properties, with temperatures of 800-1800 K and very red colors (J −H > 0.5 mag), implying thick cloud covers. Furthermore, substantial model uncertainties exist at these young ages due to the unknown initial conditions at formation, which can lead to an order of magnitude of uncertainty in the modeled planet mass. Here, we report the direct imaging discovery of a Jovian exoplanet around the Sun-like star GJ 504, detected as part of the SEEDS survey. The system is older than all other known directly-imaged planets; as a result, its estimated mass remains in the planetary regime independent of uncertainties related to choices of initial conditions in the exoplanet modeling. Using the most common exoplanet cooling model, and given the system age of 160(+350/−60) Myr, GJ 504 b has an estimated mass of 4(+4.5/−1.0) Jupiter masses, among the lowest of directly imaged planets. Its projected separation of 43.5 AU exceeds the typical outer boundary of approx.. 30 AU predicted for the core accretion mechanism. GJ 504 b is also significantly cooler (510(+30/−20) K)) and has a bluer color (J − H = −0.23 mag) than previously imaged exoplanets, suggesting a largely cloud-free atmosphere accessible to spectroscopic characterization. Thus, it has the potential of providing novel insights into the origins of giant planets, as well as their atmospheric properties.
PRIMA addresses questions about the origins and growth of planets, supermassive black holes, stars, and dust. Much of the radiant energy from these formation processes is obscured and only emerges in the far infrared (IR) where PRIMA observes (24–261 um). PRIMA’s PI science program (25% of its 5-year mission) focuses on three questions and feeds a rich archival Guest Investigator program: How do exoplanets form and what are the origins of their atmospheres? How do galaxies’ black holes and stellar masses co-evolve over cosmic time? How do interstellar dust and metals build up in galaxies over time? PRIMA provides access to atomic (C, N, O, Ne) and molecular lines (HD, H2O, OH), redshifted PAH emission bands, and far-IR dust emission. PRIMA’s 1.8-m, 4.5-K telescope serves two instruments using sensitive KIDs: the Far-InfraRed Enhanced Survey Spectrometer (continuous, high-resolution spectral coverage with over an order of magnitude improvement in spectral line sensitivity and 3-5 orders of magnitude improvement in spectral survey speed) and the PRIMA Imager (hyperspectral imaging, broadband polarimetry). PRIMA opens new discovery space with 75% of the time for General Observers.
Low resolution thermal emission spectra of several dozen extrasolar planets have been measured using Spitzer, and HST observations of a few key exoplanets have reported molecular abundances via transmission spectroscopy. However, current models for the atmospheric structure of these worlds exhibit degeneracies wherein different combinations of temperature and molecular abundance profiles can fit the same Spitzer data. The advent of the IR capability on HST/WFC3 allows us to address this problem. We are currently obtaining transmission spectroscopy of the 1.4-micron water band in a sample of 13 planets, using the G141 grism on WFC3. This is the largest pure-exoplanet program ever executed on HST (115 orbits). Among the abundant molecules, only water absorbs significantly at 1.4-microns, and our measurement of water abundance will enable us to break the degeneracies in the Spitzer results with minimal model assumptions. We are also using the G141 grism to observe secondary eclipses for 7 very hot giant exoplanets at 1.S-microns, including several bright systems in the Kepler and CoRoT fields. The strong temperature sensitivity of the thermal continuum at 1.S-microns provides high leverage on atmospheric temperature for these worlds, again helping to break degeneracies in interpreting the Spitzer data. We here describe preliminary results for several exoplanets observed in this program.
Carbon is the fourth-most prevalent element in the Universe and essential for all known life. In the elemental form it is found in multiple allotropes, including graphite, diamond and fullerenes, and it has long been predicted that even more structures can exist at pressures greater than those at Earth’s core. Several phases have been predicted to exist in the multi-terapascal regime, which is important for accurate modelling of the interiors of carbon-rich exoplanets. By compressing solid carbon to 2 terapascals (20 million atmospheres; more than five times the pressure at Earth’s core) using ramp-shaped laser pulses and simultaneously measuring nanosecond-duration time-resolved X-ray diffraction, we found that solid carbon retains the diamond structure far beyond its regime of predicted stability. The results confirm predictions that the strength of the tetrahedral molecular orbital bonds in diamond persists under enormous pressure, resulting in large energy barriers that hinder conversion to more-stable high-pressure allotropes, just as graphite formation from metastable diamond is kinetically hindered at atmospheric pressure. In conclusion, this work nearly doubles the highest pressure at which X-ray diffraction has been recorded on any material.
White dwarfs (WDs) polluted by exoplanetary material provide the unprecedented opportunity to directly observe the interiors of exoplanets. However, spectroscopic surveys are often limited by brightness constraints, and WDs tend to be very faint, making detections of large populations of polluted WDs difficult. In this paper, we aim to increase considerably the number of WDs with multiple metals in their atmospheres. Using 96,134 WDs with Gaia DR3 BP/RP (XP) spectra, we constructed a 2D map using an unsupervised machine-learning technique called Uniform Manifold Approximation and Projection (UMAP) to organize the WDs into identifiable spectral regions. The polluted WDs are among the distinct spectral groups identified in our map. We have shown that this selection method could potentially increase the number of known WDs with five or more metal species in their atmospheres by an order of magnitude. Such systems are essential for characterizing exoplanet diversity and geology.
Low resolution thermal emission spectra of roger two dozen extrasolar planets have been measured using Spitzer, and HST observations of a few key exoplanets have defined molecular abundances via transmission spectroscopy. However, current models for the atmospheric structure of these worlds exhibit degeneracies wherein different combinations of temperature and molecular abundance profiles can fit the same Spitzer data. The advent of the IR capability on HST/WFC3 allows us to address this problem. We are currently obtaining transmission spectroscopy of the 1.4-micron water band in a sample of 13 planets, using the G141 grism on WFC3, Among the abundant molecules, only water absorbs at this wavelength, and our measurement of water abundance will enable us to break the degeneracies in the Spitzer results with minimal model assumptions. We will also use the G141 grism to observe secondary eclipses for 7 very hot giant exoplanets at 1.5-microns, including several bright systems in the Kepler and CoRoT fields. The strong temperature sensitivity of the thermal continuum at 1.5-microns provides high leverage on atmospheric temperature for these worlds, again helping to break degeneracies in interpreting the Spitzer data. We here describe preliminary results for several exoplanets observed in this program,
High-energy X-ray and ultraviolet(UV)radiation from young stars impacts planetary atmospheric chemistry and mass loss. The active∼22 Myr M dwarf AU Mic hosts two exoplanets orbiting interior to its debris disk. Therefore, this system provides a unique opportunity to quantify the effects of stellar X-ray and UV irradiation on planetary atmospheres as a function of both age and orbital separation. In this paper, we present over 5 hr of far-UV (FUV)observations of AU Mic taken with the Cosmic Origins Spectrograph (COS; 1070-1360Å) on the Hubble Space Telescope (HST). We provide an itemization of 120 emission features in the HST/COS FUV spectrum and quantify the flux contributions from formation temperatures ranging from 104 to 107K. We detect 13 flares in the FUV white-light curve with energies ranging from 1029 to 1031erg s. The majority of the energy in each of these flares is released from the transition region between the chromosphere and the corona. There is a 100×increase influx at continuum wavelengths λ<1100 Å in each flare, which may be caused by thermal Bremsstrahlung emission. We calculate that the baseline atmospheric mass-loss rate for AU Mic b is∼108 g s−1, although this rate can be as high as∼1014 g s−1during flares with Lflare 10-33 erg s−1. Finally, we model the transmission spectra for AU Mic b and c with a new panchromatic spectrum of AU Mic and motivate future JWST observations of these planets.
Molecular line lists (a catalogue of transition frequencies and line strengths) are important for modelling absorption and emission processes in atmospheres of different astronomical objects, such as cool stars and exoplanets. In order to be applicable for high temperatures, line lists for molecules like methane must contain billions of transitions, which makes their direct (line-by-line) application in radiative transfer calculations impracticable. Here we suggest a new, hybrid line list format to mitigate this problem, based on the idea of temperature-dependent absorption continuum. Methods. The line list is partitioned into a large set of relatively weak lines and a small set of important, stronger lines. The weaker lines are then used either to construct a temperature-dependent (but pressure-independent) set of intensity cross sections or are blended into a greatly reduced set of super-lines. The strong lines are kept in the form of temperature independent Einstein A coefficients. Results. A line list for methane is constructed as a combination of 17 million strong absorption lines relative to the reference absorption spectra and a background methane continuum in two temperature-dependent forms, of cross sections and super-lines. This approach eases the use of large high temperature line lists significantly as the computationally expensive calculation of pressure dependent profiles only need to be performed for a relatively small number of lines. Both the line list and cross sections were generated using a new 34 billion methane line list (34 to10), which extends the 10to10 line list to higher temperatures (up to 2000 K). The new hybrid scheme can be applied to any large line lists containing billions of transitions. We recommend to use super-lines generated on a high resolution grid based on resolving power R = 1,000,000 to model the molecular continuum as a more flexible alternative to the temperature dependent cross sections.
Atmospheres of a number of ultra-hot Jupiters (UHJs) with temperatures gsim2000 K have been observed recently. Many of these planets show largely featureless thermal spectra in the near-infrared observed with the HST WFC3 spectrograph (1.1–1.7 μm) even though this spectral range contains strong H2O opacity. Recent works have proposed the possibility of H- opacity masking the H2O feature and/or thermal dissociation of H2O causing its apparent depletion at the high temperatures of UHJs. In this work, we test these hypotheses using observations of the exoplanet WASP-18b as a case study. We report detailed atmospheric retrievals of the planet using the HyDRA retrieval code, extended to include the effects of H- opacity and thermal dissociation. We report constraints on the H2O, CO, and H- abundances as well as the pressure–temperature profile of the dayside atmosphere for retrievals with and without H-/dissociation for each data set. We find that the H2O and H- abundances are relatively unconstrained given the featureless WFC3 spectra. We do not conclusively detect H- in the planet, contrary to previous studies that used equilibrium models to infer its presence. The constraint on the CO abundance depends on the combination of WFC3 and Spitzer data, ranging from solar to super-solar CO values. We additionally see signs of a thermal inversion from two of the data sets. Our study demonstrates the potential of atmospheric retrievals of UHJs, including the effects of H- and thermal dissociation of molecules.
The relative abundance of deuterium and hydrogen is a potent tracer of planet formation and evolution. Jupiter and Saturn have protosolar atmospheric D/H ratios, a relic of substantial gas accretion from the nebula, while the atmospheres of Neptune and Uranus are enhanced in D by accretion of ices into their envelopes. For terrestrial planets, D/H ratios are used to determine the mechanisms of volatile delivery and subsequent atmosphere loss over the lifetime of the planet. Planets and brown dwarfs more massive than ~13 M(J) quickly fuse their initial D reservoir. Here, we simulate spectra for giant exoplanets and brown dwarfs (2 M(Neptune) to ~10 M(Jupiter)) from T(eff) = 200–1800 K including both CH3D and HDO to determine the observability of these dominant deuterium isotopologues in mid-infrared thermal emission spectra. Colder objects have stronger molecular features in their spectra, due to the temperature dependence of molecular cross sections. CH3D is easier to observe than HDO at all temperatures considered, due to the strength of its absorption bands and locations of features at wavelengths with few other strong absorption features. We predict that for nearby cool brown dwarfs, the CH3D abundance can be measured at high signal to noise with the James Webb Space Telescope (JWST); for objects from 200 to 800 K closer than 10 pc, a protosolar D/H ratio would be readily observable in 2.5 hr. Moderately young Jupiter-mass planets (100–300 Myr) and young Neptunes (10 Myr) may be discovered with JWST and provide the best targets for detecting deuterium on an exoplanet in the coming decade. Future telescope designs should consider the importance of isotopes for understanding the formation and evolution of planetary atmospheres.
Atmospheres of a number of ultra-hot Jupiters (UHJs) with temperatures ≳2000 K have been observed recently. Many of these planets show largely featureless thermal spectra in the near-infrared observed with the HST WFC3 spectrograph (1.1–1.7 μm) even though this spectral range contains strong H{sub 2}O opacity. Recent works have proposed the possibility of H- opacity masking the H{sub 2}O feature and/or thermal dissociation of H{sub 2}O causing its apparent depletion at the high temperatures of UHJs. In this work, we test these hypotheses using observations of the exoplanet WASP-18b as a case study. We report detailed atmospheric retrievals of the planet using the HyDRA retrieval code, extended to include the effects of H- opacity and thermal dissociation. We report constraints on the H{sub 2}O, CO, and H- abundances as well as the pressure–temperature profile of the dayside atmosphere for retrievals with and without H-/dissociation for each data set. We find that the H{sub 2}O and H- abundances are relatively unconstrained given the featureless WFC3 spectra. We do not conclusively detect H- in the planet, contrary to previous studies that used equilibrium models to infer its presence. The constraint on the CO abundance depends on the combination of WFC3 and Spitzer data, ranging from solar to super-solar CO values. We additionally see signs of a thermal inversion from two of the data sets. Our study demonstrates the potential of atmospheric retrievals of UHJs, including the effects of H- and thermal dissociation of molecules.
Exoplanets can evolve significantly between birth and maturity, as their atmospheres, orbits, and structures are shaped by their environment. Young planets (<1 Gyr) offer an opportunity to probe the critical early stages of this evolution, where planets evolve the fastest. However, most of the known young planets orbit prohibitively faint stars. We present the discovery of two planets transiting HD 63433 (TOI 1726, TIC 130181866), a young Sun-like (M{sub ∗}=0.99±0.03) star. Through kinematics, lithium abundance, and rotation, we confirm that HD 63433 is a member of the Ursa Major moving group (τ = 414 ± 23 Myr). Based on the TESS light curve and updated stellar parameters, we estimate that the planet radii are 2.15 ± 0.10 R {sub ⊕} and 2.67 ± 0.12 R {sub ⊕}, the orbital periods are 7.11 and 20.55 days, and the orbital eccentricities are lower than about 0.2. Using High Accuracy Radial velocity Planet Searcher for the Northern hemisphere velocities, we measure the Rossiter–McLaughlin signal of the inner planet, demonstrating that the orbit is prograde. Since the host star is bright (V = 6.9), both planets are amenable to transmission spectroscopy, radial velocity measurements of their masses, and more precise determination of the stellar obliquity. This system is therefore poised to play an important role in our understanding of planetary system evolution in the first billion years after formation.
Some atmospheric gases have been proposed as counter indicators to the presence of life on an exoplanet if remotely detectable at sufficient abundance (i.e., antibiosignatures), informing the search for biosignatures and potentially fingerprinting uninhabited habitats. However, the quantitative extent to which putative antibiosignatures could exist in the atmospheres of inhabited planets is not well understood. The most commonly referenced potential antibiosignature is CO, because it represents a source of free energy and reduced carbon that is readily exploited by life on Earth and is thus often assumed to accumulate only in the absence of life. Yet, biospheres actively produce CO through biomass burning, photooxidation processes, and release of gases that are photochemically converted into CO in the atmosphere. We demonstrate with a 1D ecosphere-atmosphere model that reducing biospheres can maintain CO levels of approximately 100 ppmv (parts per million by volume) even at low H2 fluxes due to the impact of hybrid photosynthetic ecosystems. Additionally, we show that photochemistry around M dwarf stars is particularly favorable for the buildup of CO, with plausible concentrations for inhabited, oxygen-rich planets extending from hundreds of ppm to several percent. Since CH4 buildup is also favored on these worlds, and because O2 and O3 are likely not detectable with the James Webb Space Telescope, the presence of high CO (greater than 100 ppmv) may discriminate between oxygen-rich and reducing biospheres with near-future transmission observations. These results suggest that spectroscopic detection of CO can be compatible with the presence of life and that a comprehensive contextual assessment is required to validate the significance of potential antibiosignatures.