Search NASA⌕ Search

SEARCH · Search NASA

Results for “FAC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Stochastic Variation in Expression of the Tricarboxylic Acid Cycle Produces Persister Cells

Chronic bacterial infections are difficult to eradicate, though they are caused primarily by drug-susceptible pathogens. Antibiotic-tolerant persisters largely account for this paradox. In spite of their significance in the recalcitrance of chronic infections, the mechanism of persister formation is poorly understood. We previously reported that a decrease in ATP levels leads to drug tolerance in Escherichia coli , Pseudomonas aeruginosa , and Staphylococcus aureus . We reasoned that stochastic fluctuation in the expression of tricarboxylic acid (TCA) cycle enzymes can produce cells with low energy levels. S. aureus knockouts in glutamate dehydrogenase, 2-oxoketoglutarate dehydrogenase, succinyl coenzyme A (CoA) synthetase, and fumarase have low ATP levels and exhibit increased tolerance of fluoroquinolone, aminoglycoside, and β-lactam antibiotics. Fluorescence-activated cell sorter (FACS) analysis of TCA genes shows a broad Gaussian distribution in a population, with differences of over 3 orders of magnitude in the levels of expression between individual cells. Sorted cells with low levels of TCA enzyme expression have an increased tolerance of antibiotic treatment. Here, these findings suggest that fluctuations in the levels of expression of energy-generating components serve as a mechanism of persister formation. Persister cells are rare phenotypic variants that are able to survive antibiotic treatment. Unlike resistant bacteria, which have specific mechanisms to prevent antibiotics from binding to their targets, persisters evade antibiotic killing by entering a tolerant nongrowing state. Persisters have been implicated in chronic infections in multiple species, and growing evidence suggests that persister cells are responsible for many cases of antibiotic treatment failure. New antibiotic treatment strategies aim to kill tolerant persister cells more effectively, but the mechanism of tolerance has remained unclear until now.

59 BASIC BIOLOGICAL SCIENCES↗

Statistical dielectronic recombination rates for multielectron ions in plasma

We describe the general analytic derivation of the dielectronic recombination (DR) rate coefficient for multielectron ions in a plasma based on the statistical theory of an atom in terms of the spatial distribution of the atomic electron density. The dielectronic recombination rates for complex multielectron tungsten ions are calculated numerically in a wide range of variation of the plasma temperature, which is important for modern nuclear fusion studies. The results of statistical theory are compared with the data obtained using level-by-level codes ADPAK, FAC, HULLAC, and experimental results. We consider different statistical DR models based on the Thomas–Fermi distribution, viz., integral and differential with respect to the orbital angular momenta of the ion core and the trapped electron, as well as the Rost model, which is an analog of the Frank–Condon model as applied to atomic structures. In view of its universality and relative simplicity, the statistical approach can be used for obtaining express estimates of the dielectronic recombination rate coefficients in complex calculations of the parameters of the thermonuclear plasmas. The application of statistical methods also provides information for the dielectronic recombination rates with much smaller computer time expenditures as compared to available level-by-level codes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electron collisional excitation cross-section measurements and modeling for select Ni-like to Ge-like gold transitions

We have experimentally determined the electron collisional excitation cross-sections for several 3d→4f and 3d→5f excitations in Ni- to Ge-like Au at energies of ~ 0.4, 1, 2, and 3 keV above threshold energy, E T , for the 3d→4f excitations ( E T ~ 2.5 keV) and ~ 0.2, 1, and 2 keV above threshold energy for the 3d→5f excitations ( E T ~ 3.3 keV). The cross-section measurements are possible by using the GSFC micro-calorimeter to record emission spectra from beam plasmas created in the Livermore EBIT-I electron beam ion trap. The cross-sections are experimentally determined from the ratio of the measured intensities of the collisionally excited lines to the intensities of the radiative recombination lines in monoenergetic electron distribution EBIT-I plasmas. The effects of polarization and Auger processes in the beam plasmas are accounted for in the cross-section determination. Experimentally determined cross-sections are compared with those from HULLAC, DWS, and FAC calculations. Finally, the measurements exhibit significant differences with the calculations of these excitation cross-sections.

74 ATOMIC AND MOLECULAR PHYSICS↗

A rapid live-cell ELISA for characterizing antibodies against cell surface antigens of Chlamydomonas reinhardtii and its use in isolating algae from natural environments with related cell wall components

Background: Cell walls are essential for most bacteria, archaea, fungi, algae and land plants to provide shape, structural integrity and protection from numerous biotic and abiotic environmental factors. In the case of eukaryotic algae, relatively little is known of the composition, structure or mechanisms of assembly of cell walls in individual species or between species and how these differences enable algae to inhabit a great diversity of environments. In this paper we describe the use of camelid antibody fragments (VHHs) and a streamlined ELISA assay as powerful new tools for obtaining mono-specific reagents for detecting individual algal cell wall components and for isolating algae that share a particular cell surface component. Results: To develop new microalgal bioprospecting tools to aid in the search of environmental samples for algae that share similar cell wall and cell surface components, we have produced single-chain camelid antibodies raised against cell surface components of the single-cell alga, Chlamydomonas reinhardtii. We have cloned the variable-region domains (VHHs) from the camelid heavy-chain-only antibodies and overproduced tagged versions of these monoclonal-like antibodies in E. coli. Using these VHHs, we have developed an accurate, facile, low cost ELISA that uses live cells as a source of antigens in their native conformation and that requires less than 90 minutes to perform. This ELISA technique was demonstrated to be as accurate as standard ELISAs that employ proteins from cell lysates and that generally require >24 hours to complete. Among the cloned VHHs, VHH B11, exhibited the highest affinity (EC50 < 1 nM) for the C. reinhardtii cell surface. The live-cell ELISA procedure was employed to detect algae sharing cell surface components with C. reinhardtii in water samples from natural environments. In addition, mCherry-tagged VHH B11 was used along with fluorescence activated cell sorting (FACS) to select individual axenic isolates of presumed wild relatives of C. reinhardtii and other Chlorphyceae from the same environmental samples. Conclusions: Camelid antibody VHH domains provide a highly specific tool for detection of individual cell wall components of algae and for allowing the selection of algae that share a particular cell surface molecule from diverse ecosystems.

54 ENVIRONMENTAL SCIENCES↗

SNaPP: Simplified Nanoproteomics Platform for Reproducible Global Proteomic Analysis of Nanogram Protein Quantities

Global proteomic analyses are now widely applied across biological research to study changes in an organism(s) proteome correlated with a perturbation, phenotype and/or time series of interest.[1-3] Further, it has been broadly established that efficient and reproducible sample preparation workflows are crucial to successful quantitative proteome comparisons, especially when applying label free methods.[4-8] However, clinical samples are often severely limited in quantity and can preclude the application of more robust bulk sample processing workflows due to e.g. contamination, carry-over, or sample losses.[9] This has limited the effective application of global proteomics for many sample types of great interest, e.g. LCM dissected tissues, FACS sorted cells, circulating tumor cells (CTC), and early embryos. In a typical proteomics experiment, bulk homogenization is applied to generate sufficient protein for processing (> 10 µg protein), and can blend the proteomes of many different cell types and disparate tissue regions. The resulting “average” proteome, can effectively render unobservable proteome changes of interest, and preclude important applications. Global proteomic analyses of complex protein samples in nanogram quantities require a fastidious approach to achieve in-depth protein coverage and quantitative reproducibility.

automation↗

Materials Data on Ti2NbNi9 by Materials Project

Ti2NbNi9 is Uranium Silicide-derived structured and crystallizes in the monoclinic Pm space group. The structure is three-dimensional. there are five inequivalent Ti sites. In the first Ti site, Ti is bonded to twelve Ni atoms to form TiNi12 cuboctahedra that share corners with four TiNi12 cuboctahedra, corners with eight NbNi12 cuboctahedra, edges with twenty-four NiTi3NbNi8 cuboctahedra, faces with six TiNi12 cuboctahedra, and faces with twelve NiTi3NbNi8 cuboctahedra. There are a spread of Ti–Ni bond distances ranging from 2.54–2.57 Å. In the second Ti site, Ti is bonded to twelve Ni atoms to form TiNi12 cuboctahedra that share corners with four TiNi12 cuboctahedra, corners with eight NbNi12 cuboctahedra, edges with twenty-four NiTi2Nb2Ni8 cuboctahedra, faces with six TiNi12 cuboctahedra, and faces with twelve NiTi3NbNi8 cuboctahedra. There are a spread of Ti–Ni bond distances ranging from 2.54–2.58 Å. In the third Ti site, Ti is bonded to twelve Ni atoms to form TiNi12 cuboctahedra that share corners with six TiNi12 cuboctahedra, corners with twelve NiTi3NbNi8 cuboctahedra, edges with eighteen NiTi2Nb2Ni8 cuboctahedra, faces with four TiNi12 cuboctahedra, faces with four NbNi12 cuboctahedra, and faces with twelve NiTi3NbNi8 cuboctahedra. There are a spread of Ti–Ni bond distances ranging from 2.56–2.61 Å. In the fourth Ti site, Ti is bonded to twelve Ni atoms to form TiNi12 cuboctahedra that share corners with six TiNi12 cuboctahedra, corners with twelve NiTi2Nb2Ni8 cuboctahedra, edges with eighteen NiTi3NbNi8 cuboctahedra, faces with three TiNi12 cuboctahedra, faces with five NbNi12 cuboctahedra, and faces with twelve NiTi2Nb2Ni8 cuboctahedra. There are a spread of Ti–Ni bond distances ranging from 2.56–2.61 Å. In the fifth Ti site, Ti is bonded to twelve Ni atoms to form TiNi12 cuboctahedra that share corners with six TiNi12 cuboctahedra, corners with twelve NiTi3NbNi8 cuboctahedra, edges with eighteen NiTi3NbNi8 cuboctahedra, faces with three NbNi12 cuboctahedra, faces with five TiNi12 cuboctahedra, and faces with twelve NiTi3NbNi8 cuboctahedra. There are a spread of Ti–Ni bond distances ranging from 2.56–2.60 Å. There are four inequivalent Nb sites. In the first Nb site, Nb is bonded to twelve Ni atoms to form NbNi12 cuboctahedra that share corners with two equivalent TiNi12 cuboctahedra, corners with ten NbNi12 cuboctahedra, edges with twenty-four NiTi2Nb2Ni8 cuboctahedra, faces with six TiNi12 cuboctahedra, and faces with twelve NiTi3NbNi8 cuboctahedra. There are a spread of Nb–Ni bond distances ranging from 2.56–2.61 Å. In the second Nb site, Nb is bonded to twelve Ni atoms to form NbNi12 cuboctahedra that share corners with four equivalent TiNi12 cuboctahedra, corners with eight NbNi12 cuboctahedra, edges with twenty-four NiTi2Nb2Ni8 cuboctahedra, faces with six TiNi12 cuboctahedra, and faces with twelve NiTi3NbNi8 cuboctahedra. There are a spread of Nb–Ni bond distances ranging from 2.55–2.60 Å. In the third Nb site, Nb is bonded to twelve Ni atoms to form NbNi12 cuboctahedra that share corners with six TiNi12 cuboctahedra, corners with six NbNi12 cuboctahedra, edges with twenty-four NiTi3NbNi8 cuboctahedra, faces with six TiNi12 cuboctahedra, and faces with twelve NiTi3NbNi8 cuboctahedra. There are a spread of Nb–Ni bond distances ranging from 2.55–2.61 Å. In the fourth Nb site, Nb is bonded to twelve Ni atoms to form NbNi12 cuboctahedra that share corners with four TiNi12 cuboctahedra, corners with eight NbNi12 cuboctahedra, edges with twenty-four NiTi3NbNi8 cuboctahedra, faces with six TiNi12 cuboctahedra, and faces with twelve NiTi2Nb2Ni8 cuboctahedra. There are a spread of Nb–Ni bond distances ranging from 2.56–2.60 Å. There are twenty-seven inequivalent Ni sites. In the first Ni site, Ni is bonded to two equivalent Ti, two Nb, and eight Ni atoms to form distorted NiTi2Nb2Ni8 cuboctahedra that share corners with twelve NiTi2Nb2Ni8 cuboctahedra, edges with four TiNi12 cuboctahedra, edges with four NbNi12 cuboctahedra, edges with sixteen NiTi3NbNi8 cuboctahedra, faces with two equivalent TiNi12 cuboctahedra, faces with two NbNi12 cuboctahedra, and faces with fourteen NiTi2Nb2Ni8 cuboctahedra. There are a spread of Ni–Ni bond distances ranging from 2.50–2.62 Å. In the second Ni site, Ni is bonded to two equivalent Ti, two Nb, and eight Ni atoms to form distorted NiTi2Nb2Ni8 cuboctahedra that share corners with twelve NiTi2Nb2Ni8 cuboctahedra, edges with two NbNi12 cuboctahedra, edges with six TiNi12 cuboctahedra, edges with sixteen NiTi3NbNi8 cuboctahedra, faces with two equivalent TiNi12 cuboctahedra, faces with two NbNi12 cuboctahedra, and faces with fourteen NiTi3NbNi8 cuboctahedra. There are a spread of Ni–Ni bond distances ranging from 2.49–2.64 Å. In the third Ni site, Ni is bonded to two equivalent Ti, two Nb, and eight Ni atoms to form distorted NiTi2Nb2Ni8 cuboctahedra that share corners with twelve NiTi2Nb2Ni8 cuboctahedra, edges with two NbNi12 cuboctahedra, edges with six TiNi12 cuboctahedra, edges with sixteen NiTi3NbNi8 cuboctahedra, faces with two equivalent TiNi12 cuboctahedra, faces with two NbNi12 cuboctahedra, and faces with fourteen NiTi3NbNi8 cuboctahedra. There are a spread of Ni–Ni bond distances ranging from 2.50–2.62 Å. In the fourth Ni site, Ni is bonded to two equivalent Ti, two Nb, and eight Ni atoms to form distorted NiTi2Nb2Ni8 cuboctahedra that share corners with twelve NiTi2Nb2Ni8 cuboctahedra, edges with four TiNi12 cuboctahedra, edges with four NbNi12 cuboctahedra, edges with sixteen NiTi3NbNi8 cuboctahedra, faces with two equivalent TiNi12 cuboctahedra, faces with two NbNi12 cuboctahedra, and faces with fourteen NiTi2Nb2Ni8 cuboctahedra. There are a spread of Ni–Ni bond distances ranging from 2.52–2.61 Å. In the fifth Ni site, Ni is bonded to two equivalent Ti, two Nb, and eight Ni atoms to form distorted NiTi2Nb2Ni8 cuboctahedra that share corners with twelve NiTi2Nb2Ni8 cuboctahedra, edges with two NbNi12 cuboctahedra, edges with six TiNi12 cuboctahedra, edges with sixteen NiTi3NbNi8 cuboctahedra, faces with two equivalent TiNi12 cuboctahedra, faces with two NbNi12 cuboctahedra, and faces with fourteen NiTi3NbNi8 cuboctahedra. There are a spread of Ni–Ni bond distances ranging from 2.52–2.60 Å. In the sixth Ni site, Ni is bonded to two equivalent Ti, two Nb, and eight Ni atoms to form distorted NiTi2Nb2Ni8 cuboctahedra that share corners with twelve NiTi2Nb2Ni8 cuboctahedra, edges with two NbNi12 cuboctahedra, edges with six TiNi12 cuboctahedra, edges with sixteen NiTi3NbNi8 cuboctahedra, faces with two equivalent TiNi12 cuboctahedra, faces with two NbNi12 cuboctahedra, and faces with fourteen NiTi3NbNi8 cuboctahedra. There are a spread of Ni–Ni bond distances ranging from 2.51–2.62 Å. In the seventh Ni site, Ni is bonded to two equivalent Ti, two equivalent Nb, and eight Ni atoms to form distorted NiTi2Nb2Ni8 cuboctahedra that share corners with twelve NiTi2Nb2Ni8 cuboctahedra, edges with four equivalent TiNi12 cuboctahedra, edges with four NbNi12 cuboctahedra, edges with sixteen NiTi2Nb2Ni8 cuboctahedra, faces with two equivalent TiNi12 cuboctahedra, faces with two equivalent NbNi12 cuboctahedra, and faces with fourteen NiTi3NbNi8 cuboctahedra. All Ni–Ni bond lengths are 2.57 Å. In the eighth Ni site, Ni is bonded to two equivalent Ti, two equivalent Nb, and eight Ni atoms to form distorted NiTi2Nb2Ni8 cuboctahedra that share corners with twelve NiTi2Nb2Ni8 cuboctahedra, edges with two NbNi12 cuboctahedra, edges with six TiNi12 cuboctahedra, edges with sixteen NiTi2Nb2Ni8 cuboctahedra, faces with two equivalent TiNi12 cuboctahedra, faces with two equivalent NbNi12 cuboctahedra, and faces with fourteen NiTi3NbNi8 cuboctahedra. All Ni–Ni bond lengths are 2.58 Å. In the ninth Ni site, Ni is bonded to two equivalent Ti, two equivalent Nb, and eight Ni atoms to form distorted NiTi2Nb2Ni8 cuboctahedra that share corners with twelve NiTi2Nb2Ni8 cuboctahedra, edges with two NbNi12 cuboctahedra, edges with six TiNi12 cuboctahedra, edges with sixteen NiTi3NbNi8 cuboctahedra, faces with two equivalent TiNi12 cuboctahedra, faces with two equivalent NbNi12 cuboctahedra, and faces with fourteen NiTi3NbNi8 cuboctahedra. There are two shorter (2.58 Å) and two longer (2.59 Å) Ni–Ni bond lengths. In the tenth Ni site, Ni is bonded to three Ti, one Nb, and eight Ni atoms to form distorted NiTi3NbNi8 cuboctahedra that share corners with twelve NiTi2Nb2Ni8 cuboctahedra, edges with three NbNi12 cuboctahedra, edges with five TiNi12 cuboctahedra, edges with sixteen NiTi3NbNi8 cuboctahedra, a faceface with one NbNi12 cuboctahedra, faces with three TiNi12 cuboctahedra, and faces with fourteen NiTi3NbNi8 cuboctahedra. There are a spread of Ni–Ni bond distances ranging from 2.49–2.64 Å. In the eleventh Ni site, Ni is bonded to three Ti, one Nb, and eight Ni atoms to form distorted NiTi3NbNi8 cuboctahedra that share corners with twelve NiTi2Nb2Ni8 cuboctahedra, edges with three NbNi12 cuboctahedra, edges with five TiNi12 cuboctahedra, edges with sixteen NiTi2Nb2Ni8 cuboctahedra, a faceface with one NbNi12 cuboctahedra, faces with three TiNi12 cuboctahedra, and faces with fourteen NiTi2Nb2Ni8 cuboctahedra. There are a spread of Ni–Ni bond distances ranging from 2.50–2.63 Å. In the twelfth Ni site, Ni is bonded to four Ti and eight Ni atoms to form distorted NiTi4Ni8 cuboctahedra that share corners with twelve NiTi2Nb2Ni8 cuboctahedra, edges with two equivalent NbNi12 cuboctahedra, edges with six TiNi12 cuboctahedra, edges with sixteen NiTi3NbNi8 cuboctahedra, faces with four TiNi12 cuboctahedra, and faces with fourteen NiTi3NbNi8 cuboctahedra. There are a spread of Ni–Ni bond distances ranging from 2.50–2.63 Å. In the thirteenth Ni site, Ni is bonded to three Ti, one Nb, and eight Ni atoms to form distorted NiTi3NbNi8 cuboctahedra that share corners with twelve NiTi2Nb2Ni8 cuboctahedra, edges with three NbNi12 cuboctahedra, edges with five TiNi12 cuboctahedra, edges with sixteen NiTi3NbNi8 cuboctahedra, a faceface with one NbNi12 cuboctahedra, faces with three TiNi12 cuboctahedra, and faces with fourteen NiTi3NbNi8 cuboctahedra. There are a spread of Ni–Ni bond distances ranging from 2.52–2.61 Å. In the fourteenth Ni site, Ni is bonded to three Ti, one Nb, and eight Ni atoms to form distorted NiTi3NbNi8 cuboctahedra that share corners with twelve NiTi2Nb2Ni8 cuboctahedra, edges with three NbNi12 cuboctahedra, edges with five TiNi12 cuboctahedra, edges with sixteen NiTi2Nb2Ni8 cuboctahedra, a faceface with one NbNi12 cuboctahedra, faces with three TiNi12 cuboctahedra, and faces with fourteen NiTi3NbNi8 cuboctahedra. There are a spread of Ni–Ni bond distances ranging from 2.50–2.63 Å. In the fifteenth Ni site, Ni is bonded to four Ti and eight Ni atoms to form distorted NiTi4Ni8 cuboctahedra that share corners with twelve NiTi2Nb2Ni8 cuboctahedra, edges with two equivalent NbNi12 cuboctahedra, edges with six TiNi12 cuboctahedra, edges with sixteen NiTi3NbNi8 cuboctahedra, faces with four TiNi12 cuboctahedra, and faces with fourteen NiTi3NbNi8 cuboctahedra. There are a spread of Ni–Ni bond distances ranging from 2.51–2.61 Å. In the sixteenth Ni site, Ni is bonded to two equivalent Ti, two equivalent Nb, and eight Ni atoms to form distorted NiTi2Nb2Ni8 cuboctahedra that share corners with twelve NiTi2Nb2Ni8 cuboctahedra, edges with two equivalent NbNi12 cuboctahedra, edges with six TiNi12 cuboctahedra, edges with sixteen NiTi2Nb2Ni8 cuboctahedra, faces with two equivalent TiNi12 cuboctahedra, faces with two equivalent NbNi12 cuboctahedra, and faces with fourteen NiTi3NbNi8 cuboctahedra. All Ni–Ni bond lengths are 2.56 Å. In the seventeenth Ni site, Ni is bonded to four Ti and eight Ni atoms to form distorted NiTi4Ni8 cuboctahedra that share corners with twelve NiTi2Nb2Ni8 cuboctahedra, edges with three NbNi12 cuboctahedra, edges with five TiNi12 cuboctahedra, edges with sixteen NiTi3NbNi8 cuboctahedra, faces with four TiNi12 cuboctahedra, and fac

36 MATERIALS SCIENCE↗

Impact of Large Scale Energy Efficiency Programs On Consumer Tariffs and Utility Finances in India

Large-scale EE programs would modestly increase tariffs but reduce consumers' electricity bills significantly. However, the primary benefit of EE programs is a significant reduction in power shortages, which might make these programs politically acceptable even if tariffs increase. To increase political support, utilities could pursue programs that would result in minimal tariff increases. This can be achieved in four ways: (a) focus only on low-cost programs (such as replacing electric water heaters with gas water heaters); (b) sell power conserved through the EE program to the market at a price higher than the cost of peak power purchase; (c) focus on programs where a partial utility subsidy of incremental capital cost might work and (d) increase the number of participant consumers by offering a basket of EE programs to fit all consumer subcategories and tariff tiers. Large scale EE programs can result in consistently negative cash flows and significantly erode the utility's overall profitability. In case the utility is facing shortages, the cash flow is very sensitive to the marginal tariff of the unmet demand. This will have an important bearing on the choice of EE programs in Indian states where low-paying rural and agricultural consumers form the majority of the unmet demand. These findings clearly call for a flexible, sustainable solution to the cash-flow management issue. One option is to include a mechanism like FAC in the utility incentive mechanism. Another sustainable solution might be to have the net program cost and revenue loss built into utility's revenue requirement and thus into consumer tariffs up front. However, the latter approach requires institutionalization of EE as a resource. The utility incentive mechanisms would be able to address the utility disincentive of forgone long-run return but have a minor impact on consumer benefits. Fundamentally, providing incentives for EE programs to make them comparable to supply-side investments is a way of moving the electricity sector toward a model focused on providing energy services rather than providing electricity.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Structural Health Monitoring for Impact Damage in Composite Structures.

Composite structures are increasing in prevalence throughout the aerospace, wind, defense, and transportation industries, but the many advantages of these materials come with unique challenges, particularly in inspecting and repairing these structures. Because composites of- ten undergo sub-surface damage mechanisms which compromise the structure without a clear visual indication, inspection of these components is critical to safely deploying composite re- placements to traditionally metallic structures. Impact damage to composites presents one of the most signi fi cant challenges because the area which is vulnerable to impact damage is generally large and sometimes very dif fi cult to access. This work seeks to further evolve iden- ti fi cation technology by developing a system which can detect the impact load location and magnitude in real time, while giving an assessment of the con fi dence in that estimate. Fur- thermore, we identify ways by which impact damage could be more effectively identi fi ed by leveraging impact load identi fi cation information to better characterize damage. The impact load identi fi cation algorithm was applied to a commercial scale wind turbine blade, and results show the capability to detect impact magnitude and location using a single accelerometer, re- gardless of sensor location. A technique for better evaluating the uncertainty of the impact estimates was developed by quantifying how well the impact force estimate meets the assump- tions underlying the force estimation technique. This uncertainty quanti fi cation technique was found to reduce the 95% con fi dence interval by more than a factor of two for impact force estimates showing the least uncertainty, and widening the 95% con fi dence interval by a fac- tor of two for the most uncertain force estimates, avoiding the possibility of understating the uncertainty associated with these estimates. Linear vibration based damage detection tech- niques were investigated in the context of structural stiffness reductions and impact damage. A method by which the sensitivity to damage could be increased for simple structures was presented, and the challenges of applying that technique to a more complex structure were identi fi ed. The structural dynamic changes in a weak adhesive bond were investigated, and the results showed promise for identifying weak bonds that show little or no static reduction in stiffness. To address these challenges in identifying highly localized impact damage, the possi- bility of detecting damage through nonlinear dynamic characteristics was also identi fi ed, with a proposed technique which would leverage impact location estimates to enable the detection of impact damage. This nonlinear damage identi fi cation concept was evaluated on a composite panel with a substructure disbond, and the results showed that the nonlinear dynamics at the damage site could be observed without a baseline healthy reference. By further developing impact load identi fi cation technology and combining load and damage estimation techniques into an integrated solution, the challenges associated with impact detection in composite struc- tures can be effectively solved, thereby reducing costs, improving safety, and enhancing the operational readiness and availability of high value assets.

Roach, Dennis P.↗

Flow-Assisted Corrosion in Nuclear Power Plants

The flow-assisted corrosion, or flow-accelerated corrosion (FAC) is one of the major piping degradation mechanisms in aging nuclear power plants and it has been identified as a research area under the Light Water Reactor Sustainability program at Idaho National Laboratory (INL). While every nuclear power plant in US has a dedicated flow-assisted corrosion management program, there are several areas where the management of flow assisted corrosion can be improved. One of such areas is on-line corrosion monitoring which can significantly reduce maintenance inspections and contribute to improvement of economic efficiency of nuclear power plants. The proliferation of low cost sensor modalities such as strain fiber optics sensors and noninvasive concentration sensors, allowed development of on-line nonintrusive monitoring techniques, which can complement or replace existing evaluation techniques. The report presents a literature review of the current state-of-the-art in flow-assisted corrosion monitoring, and a research framework to study on-line monitoring techniques. The report addresses the problem on on-line monitoring of flow-assisted corrosion in nuclear power plants.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Safety Test on Irradiated Compact 4-2-2

Post-irradiation examination (PIE) is in progress on coated particle fuel compacts from the first Advanced Gas Reactor (AGR) Fuel Development and Qualification irradiation experiment (AGR-1). The AGR-1 Post-Irradiation Examination Plan (INL/PLN-2828, Rev. 1) includes safety testing of the irradiated compacts in the Oak Ridge National Laboratory (ORNL) Core Conduction Cooldown Test Facility (CCCTF) and the Idaho National Laboratory (INL) Fuel Accident Condition Simulator (FACS) to evaluate the effect of elevated temperature on the fuel microstructure and fission product retention. Standard safety tests involve heating compacts to maximum temperatures of 1600, 1700, or 1800°C for typically 300 hours, where 1600°C is the expected maximum temperature during a high-temperature gascooled reactor (HTGR) depressurization conduction cooldown event, while 1700 and 1800°C explore the performance margin. The Compact 4-2-2 safety test was conducted using multiple hold temperatures from 1000–1600°C to investigate fission product retention at temperatures below 1600°C and during thermal cycling, with particular emphasis on silver retention behavior [INL/PLN-4714]. Previous tests produced unusual silver releases when temperatures were inadvertently or intentionally cycled between room temperature and 1600°C [ORNL/LTR-2012/396]; the Compact 4-2-2 test was designed to reproduce and explore these observations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Safety Tests on Irradiated AGR-1 Compacts 3-3-2, 3-2-2, and 6-2-1

Post-irradiation examination (PIE) is in progress on coated particle fuel compacts from the first Advanced Gas Reactor irradiation experiment (AGR-1). The AGR-1 Post-Irradiation Examination Plan, INL/PLN- 2828/Rev. 1, includes safety testing of the irradiated compacts in the Oak Ridge National Laboratory (ORNL) Core Conduction Cooldown Test Facility (CCCTF) facility and the Idaho National Laboratory Fuel Accident Condition Simulator (FACS) to evaluate the effect of elevated temperature on the fuel microstructure and fission product retention. Safety tests will involve heating compacts for 100– 500 hours to maximum temperatures of 1600°C–1800°C, where 1600°C is the expected maximum temperature during a high-temperature gas-cooled reactor depressurization conduction cooldown event, and 1800°C is the expected temperature at which the performance of the SiC layer will begin to degrade. ORNL completed the first AGR-1 post-irradiation compact safety test in FY2011. During the first two quarters of FY2012, three additional safety tests were completed. Each of these three compacts was heated up to a maximum temperature of 1600°C and held at this temperature for a period of 300 hours. The standard heating profile specified in each compact examination plan called for a controlled ramp of the furnace to 1600°C with soaks at 400 and 1250°C, a hold at 1600°C for 300 hours, and then a controlled ramp back down to room temperature. The CCCTF performed as designed, except for a few interruptions while the furnace was being ramped up to 1600°C. These interruptions were caused by several power supply problems and one mechanical problem with the cold finger. The root causes of these issues have been identified and addressed to ensure better reliability for future CCCTF operation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Reducing the matrix effect in mass spectral imaging of biofilms using flow-cell culture

The interactions between soil microorganisms and soil minerals play a crucial role in the formation and evolution of minerals and the stability of soil aggregates. Due to the heterogeneity and diversity of the soil environment, the under-standing of the functions of bacterial biofilms in soil minerals at the microscale is limited. A soil mineral-bacterial biofilm system was used as a model in this study, and it was analyzed by time-of-flight secondary ion mass spectrometry (ToF-SIMS) to acquire molecular level information. Static culture in multi-wells and dynamic flow-cell culture in microfluidics of biofilms were investigated. Our results show that more characteristic molecules of biofilms can be observed in SIMS spectra of the flow-cell culture. In contrast, biofilm signature peaks are buried under the mineral components in SIMS spectra in the static culture case. Spectral overlay was used in peak selection prior to performing Principal component analysis (PCA). Comparisons of the PCA results between the static and flow-cell culture show more pronounced molecular features and higher loadings of organic peaks of the dynamic cultured specimens. For example, fatty acids secreted from bacterial biofilm extracellular polymeric substance are likely to be responsible for biofilm dispersal due to mineral treatment up to 48 h. Such findings suggest that the use of microfluidic cells to dynamically culture biofilms be a more suitable method for reducing the matrix effect arisen from the growth medium and minerals as a perturbation fac-tor for improved spectral and multivariate analysis of complex mass spectral data in ToF-SIMS. These results show that the interaction mechanism between biofilms and soil minerals at the molecular level can be better studied using the flow-cell culture and advanced mass spectral imaging techniques like ToF-SIMS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Destiny of earthward streaming plasma in the plasmasheet boundary layer

The dynamics of the earth's magnetotail have been investigated, and it has become clear that the plasmasheet boundary layer field lines map into the Region I Field-Aligned Currents (FAC) of the auroral zone. It is pointed out that the role of earthward streaming ions in the plasmasheet boundary layer may be of fundamental importance in the understanding of magnetotail dynamics, auroral zone physics, and especially for ionospheric-magnetospheric interactions. The present paper has the objective to evaluate propagation characteristics for the earthward streaming ions observed in the plasmasheet boundary layer. An investigation is conducted of the propagation characteristics of protons in the plasmasheet boundary layer using independent single particle dynamics, and conclusions are discussed. The density of earthward streaming ions found in the plasmasheet boundary layer should include the ring current as well as the auroral zone precipitaiton and inner plasmasheet regions of the magnetosphere.

Green, J. L.↗

Airbus windshear warning and guidance system

From its first designed airplane, Airbus considered mandatory a help in the crew's decision-making process to initiate an escape maneuver and help to successfully realize it. All the Airbus airplanes designed since 1975 included an alpha-floor function and a speed reference control law imbedded in the speed reference system (SRS) box for A 300 and FAC and FCC for A 310, A300/600 and the A 320. Alpha-Floor function takes into account the airplane energy situation considering angle of attack and observed longitudinal situation in order to apply immediately the full power without any pilot action. Speed reference managers control airspeed and/or ground speed in order to survive a maximum in shear situation. In order to comply with the new FAA regulation: Aerospatiale and Airbus developed more efficient systems. A comparison between 1975 and a newly developed system is given. It is explained how the new system improves the situation.

Bonafe, J. L.↗

Coupling of magnetopause-boundary layer to the polar ionosphere

The plasma dynamics in the low-latitude boundary layer and its coupling to the polar ionosphere under boundary conditions at the magnetopause are investigated. In the presence of a driven plasma flow along the magnetopause, the Kelvin-Helmholtz instability can develop, leading to the formation and growth of plasma vortices in the boundary layer. The finite ionospheric conductivity leads to the decay of these vortices. The competing effect of the formation and decay of vortices leads to the formation of strong vortices only in a limited region. Several enhanced field-aligned power density regions associated with the boundary layer vortices and the upward field-aligned current (FAC) filaments can be found along the postnoon auroral oval. These enhanced field-aligned power density regions may account for the observed auroral bright spots.

Wei, C. Q.↗

An object-oriented approach for parallel self adaptive mesh refinement on block structured grids

Self-adaptive mesh refinement dynamically matches the computational demands of a solver for partial differential equations to the activity in the application's domain. In this paper we present two C++ class libraries, P++ and AMR++, which significantly simplify the development of sophisticated adaptive mesh refinement codes on (massively) parallel distributed memory architectures. The development is based on our previous research in this area. The C++ class libraries provide abstractions to separate the issues of developing parallel adaptive mesh refinement applications into those of parallelism, abstracted by P++, and adaptive mesh refinement, abstracted by AMR++. P++ is a parallel array class library to permit efficient development of architecture independent codes for structured grid applications, and AMR++ provides support for self-adaptive mesh refinement on block-structured grids of rectangular non-overlapping blocks. Using these libraries, the application programmers' work is greatly simplified to primarily specifying the serial single grid application and obtaining the parallel and self-adaptive mesh refinement code with minimal effort. Initial results for simple singular perturbation problems solved by self-adaptive multilevel techniques (FAC, AFAC), being implemented on the basis of prototypes of the P++/AMR++ environment, are presented. Singular perturbation problems frequently arise in large applications, e.g. in the area of computational fluid dynamics. They usually have solutions with layers which require adaptive mesh refinement and fast basic solvers in order to be resolved efficiently.

Lemke, Max↗

NASA University Program Management Information System

As basic policy, NASA believes that colleges and universities should be encouraged to participate in the nation's space and aeronautics program to the maximum extent practicable. Indeed, universities are considered as partners with government and industry in the nation's aerospace program. NASA's objective is to have them bring their scientific, engineering, and social research competence to bear on aerospace problems and on the broader social, economic, and international implications of NASA's technical and scientific programs. It is expected that, in so doing, universities will strengthen both their research and their educational capabilities to contribute more effectively to the national well-being. NASA field codes and certain Headquarters program offices provide funds for those activities in universities which contribute to the mission needs of that particular NASA element. Although NASA has no predetermined amount of money to devote to university activities, the effort funded each year is substantial. This annual report is one means of documenting the NASA-university relationship, frequently denoted, collectively, as NASA's University Program. This report is consistent with agency accounting records, as the data is obtained from NASA's Financial and Contractual Status (FACS) System, operated by the Financial Management Division and the Procurement Office. However, in accordance with interagency agreements, the orientation differs from that required for financial or procurement purposes. Any apparent discrepancies between this report and other NASA procurement or financial reports stem from the selection criteria for the data. This report was prepared by the Education Division/FE, Office of Human Resources and Education, using a management information system which was modernized during FY 1993.

Gans, Gary↗

NASA University Program Management Information System

As basic policy, NASA believes that colleges and universities should be encouraged to participate in the nation's space and aeronautics program to the maximum extent practicable. Indeed, universities are considered as partners with government and industry in the nation's aerospace program. NASA's objective is to have them bring their scientific, engineering, and social research competence to bear on aerospace problems and on the broader social, economic, and international implications of NASA's technical and scientific programs. It is expected that, in so doing, universities will strengthen both their research and their educational capabilities to contribute more effectively to the national well-being. NASA field codes and certain Headquarters program offices provide funds for those activities in universities which contribute to the mission needs of that particular NASA element. Although NASA has no predetermined amount of money to devote to university activities, the effort funded each year is substantial. (See the bar chart on the next page). This annual report is one means of documenting the NASA-university relationship, frequently denoted, collectively, as NASA's University Program. This report is consistent with agency accounting records, as the data is obtained from NASA's Financial and Contractual Status (FACS) System, operated by the Financial Management Division and the Procurement Office. However, in accordance with interagency agreements, the orientation differs from that required for financial or procurement purposes. Any apparent discrepancies between this report and other NASA procurement or financial reports stem from the selection criteria for the data.

Source record↗