Search NASA⌕ Search

SEARCH · Search NASA

Results for “FERROMAGNETISM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Interplay of Crystal Structure and Magnetic Properties of the Eu 5.08-x Sr x Al 3 Sb 6 Solid Solution

Zintl phases containing rare-earth metals have gained attention due to their magnetic, electronic, and thermoelectric properties. Eu 5.08 Al 3 Sb 6 is a new structure type (monoclinic space group C2/m) that can be described as a pseudorock-salt EuSb motif with the Eu-centered Sb octahedra at the origin of the unit cell, and on the C-face center, containing either Eu (8%) or an Al 4 tetrahedron modeled as a dual tetrahedron (37.5%). The complete solid solution of Eu 5.08–x Sr x Al 3 Sb 6 can be prepared; however, the cation totals vacillate from 5 to 5.24 depending on the Al content. Al K-edge XANES shows a shift to higher energy relative to the Al metal but at slightly lower energy relative to AlSb, indicating an intermediate oxidation state closer to +3 than 0. The lack of an Al K-edge shift with the incorporation of Sr suggests that changes in Sr content do not have a meaningful impact on the electronics of the Al tetrahedra. Investigation of the solid solution structures provides evidence for classifying this structure type as a polar intermetallic phase with variable composition. Magnetization measurements were collected for the solid solution and show complex magnetic ordering with competing ferromagnetic and antiferromagnetic interactions as the Sr content increases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic and EPR Spectroscopic Studies of Thiolate Bridged Divalent Ni, Pd, and Pt Ions Capped with VO(N 2 S 2 ) Metalloligands

Reactions of the metallodithiolate complex VO(bme-dach) (hereafter abbreviated as V, where bme-dach = N,N ′-bis(2-mercaptoethyl)-1,4-diazacycloheptane) with [Pd II (CH 3 CN) 4 ](BF 4 ) 2 and [Pt II (CH 3 CN) 4 ](BF 4 ) 2 yield the V–M–V trimetallic compounds [VPdV](BF 4 ) 2 (2) and [VPtV](BF 4 ) 2 (3). Reaction of a similar metalloligand, VO(bme-daco) (hereafter abbreviated as V′ where bme-daco = N,N′-bis(2-mercaptoethyl)-1,5-diazacyclooctane) with [Ni II (CH 3 CN) 6 ](BF 4 ) 2 afforded the related salt [V′NiV′](BF 4 ) 2 (1). X-ray structural analyses revealed that cations in 1, 2, and 3 adopt a stairstep C 2h structure consisting of two terminal VO(N 2 S 2 ) moieties bridged via thiolate sulfur to the group 10 metal ions. Weak ferromagnetic superexchange coupling (J = 0.282 cm –1 for 1, 0.954 cm –1 for 2, and 1.372 cm –1 for 3) was observed between the two S = 1/2 V IV centers separated by distances in the range of 5.9–6.3 Å, with J values varying following the order Ni < Pd < Pt. Frozen-solution EPR spectra measured on the more soluble [BArF 24 ] − (BArF 24 – = tetrakis((3,5-trifluoromethyl)phenyl)borate) analogues revealed that the [VPtV] 2+ cation exhibits a 15-line hyperfine splitting of 225 MHz at g = 4 in parallel mode, confirming exchange coupling between the two 51 V, I = 7/2 nuclei. Density-functional theory (DFT) calculations indicate an S = 1 ground state for 1–3. These results demonstrate that the choice of paramagnetic metallodithiolate ligand and diamagnetic bridge in such trimetallic species influences the sign and magnitude of magnetic interactions.

anions↗

Exploring Anomalous Photoelectron Angular Distributions in the Photoelectron Spectra of Gd 3 O 3 – : Study of Gd 3 O 2 – and Gd 3 O 3 – Using Photoelectron Spectroscopy and Density Functional Theory Calculations

Anion photoelectron (PE) spectra of lanthanide oxide clusters obtained previously have exhibited anomalous photoelectron angular distributions which were attributed to strong PE–valence electron (PEVE) interactions. Here, to further explore this effect, we have obtained the PE spectra of Gd 3 O 2 – and Gd 3 O 3 – , two clusters that have similarly complex electronic structures but contrasting symmetries. The spectra exhibit manifolds of detachment transitions at similar binding energies in a 0.5 eV window of energy. The electron affinity of Gd 3 O 2 is measured to be 1.29 ± 0.05 eV, and that of Gd 3 O 3 is 1.31 ± 0.05 eV. As seen in previous studies on lanthanide oxide cluster anions in lower than conventional oxidation states, transitions in spectra obtained lower photon energies are more congested than those obtained with higher photon energy, a signature of strong PEVE interactions. While the detachment transitions have predominantly parallel photoelectron angular distributions (PAD), the PAD varies across the manifold of transitions in the PE spectrum of Gd 3 O 3 – in a way that suggests four different subgroups of transitions. Results of calculations on Gd 3 O 2 – suggest kite or V-shape structures with antiferromagnetic coupling between one of the 4f 7 subshells with the two others. Calculations on Gd 3 O 3 – more definitively point to ring structures with a nearly isoenergetic ferromagnetically coupled high spin (24-tet) state and a dectet state in which one of the 4f 7 subshells is antiferromagnetically coupled with the other two. Taking these results as qualitative, we propose that strong mixing between the unperturbed states predicted computationally leads to overlapping transitions with different PADs.

anions↗

Synthesis and Polymorph Manipulation of FeSe 2 Monolayers

Polymorph engineering involves the manipulation of material properties through controlled structural modification and is a candidate technique for creating unique two-dimensional transition metal dichalcogenide (TMDC) nanodevices. Despite its promise, polymorph engineering of magnetic TMDC monolayers has not yet been demonstrated. Here we grow FeSe 2 monolayers via molecular beam epitaxy and find that they have great promise for magnetic polymorph engineering. Using scanning tunneling microscopy (STM) and spectroscopy (STS), we find that FeSe 2 monolayers predominantly display a 1T' structural polymorph at 5 K. Application of voltage pulses from an STM tip causes a local, reversible transition from the 1T' phase to the 1T phase. Density functional theory calculations suggest that this single-layer structural phase transition is accompanied by a magnetic transition from an antiferromagnetic to a ferromagnetic configuration. In conclusion, these results open new possibilities for creating functional magnetic devices with TMDC monolayers via polymorph engineering.

36 MATERIALS SCIENCE↗

Magnetic Phase Diagram of 2D Magnet Fe 5– x GeTe 2 Revealed by Cryogenic Lorentz 4D-STEM

A two-dimensional van der Waals ferromagnet Fe 5–x GeTe 2 (F5GT) exhibits room-temperature magnetic transition and magnetic anisotropy. Studies have identified diverse magnetic states, including stripe domains, skyrmionic type-I and topologically trivial type-II bubbles, depending on the magnetic and thermal history. Yet, the underlying micromagnetic energetics driving these states remains unclear. Here, we establish the magnetic phase diagram of bulk F5GT using cryogenic Lorentz four-dimensional scanning transmission electron microscopy. We reveal that stripe domains spontaneously form upon zero-field cooling, while metastable magnetic bubbles are stabilized by external fields. Transitions from type-I to type-II bubbles are driven by an oblique external field. Micromagnetic simulations confirm that these transitions arise from the interplay of uniaxial anisotropy, dipolar interactions, and external fields, without requiring significant Dzyaloshinskii–Moriya Interaction (DMI). In conclusion, these findings clarify the micromagnetic origin of spin textures of F5GT and establish it as a tunable platform for nanoscale topological magnetism.

2D Magnets↗

Shifting Valencies and Magnetic Responses in La-Based High-Entropy Oxide Perovskite Thin Films with Variable Mn Presence

Chemical disorder in compositionally complex perovskite oxides generates a broad distribution of exchange pathways and spin states, but the microscopic origin and spatial homogeneity of the resulting magnetic phases remain debated. Here, we tune the Mn fraction (x = 0.2–0.6) in epitaxial La(Cr, Mn, Fe, Co, Ni)O3 thin films and resolve the coupled evolution of valence, spin state, and magnetism using element-specific x-ray absorption spectroscopy and x-ray magnetic circular dichroism (XMCD). Mn enrichment drives an internal redistribution of charge, in which Mn evolves toward a Mn3+-rich mixed valence, while Co converts from predominantly Co3+ to high-spin Co2+. This valence/spin-state coupling amplifies the Mn- and Co-derived ferromagnetic response by nearly an order of magnitude while increasing the magnetic onset temperature to at least 250 K, whereas Fe and Cr remain essentially trivalent with weak dichroism. Depth-resolved low-energy muon spin spectroscopy (LE-μSR) shows magnetic homogeneity through the film thickness, with a secondary relaxation maximum near 25 K indicating a low-temperature dynamical crossover consistent with frustrated magnetism in a strongly disordered spin lattice.

Miertschin, Duncan [Baylor University]↗

Non-Altermagnetic Origin of Exchange Bias Behaviors in Incoherent RuO 2 /Fe Bilayer Heterostructures

Initially identified as a promising altermagnetic (AM) candidate, rutile RuO 2 has since become embroiled in controversy due to contradictory findings of modeling and measurements of the magnetic properties of bulk crystals and thin films. For example, despite observations of a bulk nonmagnetic state using density functional theory, neutron scattering, and muon spin resonance measurements, patterned RuO 2 Hall bars and film heterostructures display magnetotransport signatures of magnetic ordering. Among the characteristics routinely cited as evidence for AM is the observation of exchange bias (EB) in an intimately contacted Fe-based ferromagnetic (FM) layer, which can arise due to interfacial coupling with a compensated antiferromagnet. Here, within this work, the origins of this EB coupling in Ru-capped RuO 2 /Fe bilayers are investigated using polarized neutron diffraction, polarized neutron reflectometry, cross-sectional transmission electron microscopy, and super conducting quantum interference device measurements. These experiments reveal that the EB behavior is driven by the formation of an iron oxide interlayer containing Fe 3 O 4 that undergoes a magnetic transition and pins interfacial moments within Fe at low temperature. These findings are confirmed by comparable measurements of Ni-based heterostructures, which do not display EB coupling, as well as magnetometry of additional Fe/Ru bilayers that display oxide-driven EB coupling despite the absence of the epitaxial RuO 2 layer. While these results do not directly refute the possibility of AM ordering in RuO 2 thin films, they reveal that EB, and related magnetotransport phenomena, cannot alone be considered evidence of this characteristic in the rutile structure due to interfacial chemical disorder.

RuO2↗

Nanoscale Control of Intrinsic Magnetic Topological Insulator MnBi 2 Te 4 Using Molecular Beam Epitaxy: Implications for Defect Control

Intrinsic magnetic topological insulators have emerged as a promising platform to study the interplay between the topological surface states and ferromagnetism. This unique interplay can give rise to a variety of exotic quantum phenomena, including the quantum anomalous Hall effect and axion insulating states. Here, in this study, utilizing molecular beam epitaxy (MBE), we present a comprehensive study of the growth of MnBi 2 Te 4 thin films on Si (111), epitaxial graphene, and highly ordered pyrolytic graphite substrates. By combining a suite of in situ characterization techniques, we obtain critical insights into the nanoscale control of MnBi 2 Te 4 epitaxial growth. First, we extract the free energy landscape for the epitaxial relationship as a function of the in-plane angular distribution. Then, by employing an optimized layer-by-layer growth, we determine the chemical potential and Dirac point of the thin film at different thicknesses and how this quantity is manifested by the dopant compensation from different antisite defects. Overall, these results establish a foundation for understanding the growth kinetics of MnBi 2 Te 4 and pave the way for future applications of MBE-grown thin films in emerging topological quantum materials.

36 MATERIALS SCIENCE↗

Quantum Monte Carlo and Density Functional Theory Study of Strain and Magnetism in 2D 1T-VSe 2 with Charge Density Wave States

Two-dimensional (2D) 1T-VSe 2 has prompted significant interest due to the discrepancies regarding alleged ferromagnetism (FM) at room temperature, charge density wave (CDW) states, and the interplay between the two. We employed a combined Diffusion Monte Carlo (DMC) and density functional theory (DFT) approach to accurately investigate the magnetic properties, CDW states, and their responses to strain in monolayer 1T-VSe 2 . Our calculations show the delicate competition between various phases, revealing critical insights into the relationship between their energetic and structural properties. Here, we performed classical Monte Carlo simulations informed by our DMC and DFT results and found the magnetic transition temperature (T c ) of the undistorted (non-CDW) FM phase to be 228 K and the distorted (CDW) phase to be 68 K. Additionally, we studied the response of biaxial strain on the energetic stability and magnetic properties of various phases of 2D 1T-VSe 2 and found that small amounts of strain can increase the T c , suggesting a promising route for engineering and enhancing magnetic behavior. Finally, we synthesized 1T-VSe 2 and performed Raman spectroscopy measurements, which were in close agreement with our calculated results, validating our computational approach. Our work emphasizes the role of highly accurate DMC methods in advancing the understanding of monolayer 1T-VSe 2 and provides a robust framework for future studies of 2D magnetic materials.

2D magnets↗

Inhomogeneous Magnetic Anisotropy in an Fe 5– x GeTe 2 Nanoflake Observed by Imaging

Few-layer flakes of ferromagnetic Fe 5–x GeTe 2 with x = 0.3 (F5GT) possess a c-axis magnetocrystalline anisotropy that is large enough below ∼200 K to outcompete the easy-plane shape anisotropy, yielding distinctive magnetic microstructures with out-of-plane (OOP) magnetizations. Using photoemission electron microscopy (PEEM) with magnetic contrast from X-ray magnetic circular dichroism (XMCD) to study a thermally demagnetized h-BN-protected nanoflake of F5GT at 110 K, we observe a micron-scale coexistence between domains with OOP magnetizations (∼70% areal fraction) and hitherto unknown domains in which in-plane (IP) magnetization components dominate (∼30% areal fraction). The regions with dominant IP magnetization components do not correlate with small variations of flake thickness (6–10 nm) and instead arise from local changes of magnetocrystalline anisotropy due to a hitherto unidentified chemical inhomogeneity that we suggest to be a higher concentration of Fe vacancies. Our observation of micron-scale inhomogeneity would likely be missed if imaging a single flake orientation and should affect the viability and performance of van der Waals (vdW) spintronic devices with F5GT electrodes.

2D materials↗

Material Characterization Study of Magnetite Nanocrystals for RF Sensing

Magnetite nanocrystals show promise for electrically small gigahertz frequency applications, which could lead to miniaturizing transformer cores and new sensing technologies. This work presents a rigorous radiofrequency characterization of these nanocrystals using vector network analyzer (VNA) ferromagnetic resonance (FMR) measurements. For the first time, two different average diameters of Fe 3 O 4 nanocrystals are investigated (7.3 and 20.2 nm). When the VNA–FMR results were compared to micromagnetic simulations, the magnetic anisotropy (K 1 ) deviated from the ideal mean orientation value of K 1 /2 to K 1 /80 for the 7.3 nm nanocrystal. In contrast, the obtained magnetic anisotropy in 20.2 nm nanocrystals slightly deviated to K 1 /11 due to less structural deformations. These findings resulted in a newly proposed methodology for an approximate simulation based on VNA–FMR measurements. In addition, this work estimates the approximate amount of nanocrystals needed to measure a useful VNA–FMR spectrum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unveiling a Family of Dimerized Quantum Magnets, Conventional Antiferromagnets, and Nonmagnets in Ternary Metal Borides

Dimerized quantum magnets are exotic crystalline materials where Bose–Einstein condensation of magnetic excitations can happen. However, known dimerized quantum magnets are limited to only a few oxides and halides. Here, we unveil 9 dimerized quantum magnets and 11 conventional antiferromagnets in ternary metal borides MTB 4 (M = Sc, Y, La, Ce, Lu, Mg, Ca, and Al; T = V, Cr, Mn, Fe, Co, and Ni), where T atoms are arranged in structural dimers. Quantum magnetism in these compounds is dominated by strong antiferromagnetic (AFM) interactions between Cr (Cr and Mn for M = Mg and Ca) atoms within the dimers, with much weaker interactions between the dimers. These systems are proposed to be close to a quantum critical point between a disordered singlet spin-dimer phase, with a spin gap, and the ordered conventional Néel AFM phase. They greatly enrich the materials inventory that allows investigations of the spin-gap phase. Conventional antiferromagnetism in these compounds is dominated by ferromagnetic Mn (Fe for M = Mg and Ca) interactions within the dimers. The predicted stable and nonmagnetic (NM) YFeB 4 phase is synthesized and characterized, providing a scarce candidate to study Fe dimers and Fe ladders in borides. The identified quantum, conventional, and NM systems provide a platform with abundant possibilities to tune the magnetic exchange coupling by doping and study the unconventional quantum phase transition and conventional magnetic transitions. Finally, this work opens new avenues for studying novel magnetism in borides arising from spin dimers and establishes a theoretical workflow for future searches for dimerized quantum magnets in other families of materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chemical Design of Spin Frustration to Realize Topological Spin Glasses

Patterning spins to generate collective behavior is at the core of condensed matter physics. Physicists develop techniques, including the fabrication of magnetic nanostructures and precision layering of materials specifically to engender frustrated lattices. As chemists, we can access such exotic materials through targeted chemical synthesis and create new lattice types by chemical design. Here, in this study, we introduce a new approach to induce magnetic frustration on a modified honeycomb lattice through a competition of alternating antiferromagnetic (AFM) and ferromagnetic (FM) nearest-neighbor interactions. By subtly modulating these two types of interactions through facile synthetic modifications, we created two systems: (1) a topological spin glass and (2) a frustrated spin-canted magnet with low-temperature exchange bias. To design this unconventional magnetic lattice, we used a metal–organic framework (MOF) platform, Ni 3 (pymca) 3 X 3 (NipymcaX where pymca = pyrimidine-2-carboxylato and X = Cl, Br). We isolated two MOFs, NipymcaCl and NipymcaBr, featuring canted Ni 2+ -based moments. Despite this similarity, differences in the single-ion anisotropies of the Ni 2+ spins result in distinct magnetic properties for each material. NipymcaCl is a topological spin glass, while NipymcaBr is a rare frustrated magnet with low-temperature exchange bias. Density functional theory calculations and Monte Carlo simulations on the NipymcaX lattice support the presence of magnetic frustration as a result of alternating AFM and FM interactions. Our calculations enabled us to determine the ground-state spin configuration and the distribution of spin–spin correlations relative to paradigmatic kagomé and triangular lattices. This modified honeycomb lattice is similar to the electronic Kekulé-O phase in graphene and provides a highly tunable platform to realize unconventional spin physics.

Exchange bias↗

Electrodeposition of Magnonic V(tetracyanoethylene) 2 Thin Films

Molecule-based magnetic materials have been identified as promising candidates for application in magnonic technologies, owing not only to their solution processability but also because they can exhibit narrow ferromagnetic resonance (FMR) linewidths and low Gilbert damping coefficients—crucial prerequisites for the transmission of coherent magnons over macroscopic distances. In particular, V(TCNE) 2 , a compound with a threedimensional network structure composed of vanadium(II) centers linked by tetracyanoethylene (TCNE •− ) radical anions, displays magnonic properties comparable to yttrium iron garnet, the quintessential magnonic material in the field. However, existing solution and chemical vapor deposition methods for synthesizing V(TCNE) 2 require the use of highly reactive zero-valent molecular vanadium precursors, stymying research on this important material. Herein, we report a facile electrochemical method for the deposition of thin films of V(TCNE) 2 using readily obtainable and stable divalent vanadium precursors and TCNE •− anions generated by electrochemical reduction. Magnetization measurements reveal that the films exhibit ferrimagnetic ordering above room temperature, consistent with V(TCNE) 2 films synthesized via other methods. Moreover, the electrodeposited films exhibit narrow FMR linewidths as low as 17.5 G and a low Gilbert damping coefficient of 1.1 × 10 −3 , values that are on par with some currently integrated metallic magnonic materials. More generally, these results demonstrate that electrodeposition can provide a straightforward means of generating highperformance magnonic materials using readily available molecular precursors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

MnBi 2 Is a Permanent Magnet

Creating and understanding new permanent magnets requires an understanding of the impact of orbital angular momentum on coercivity. A simple approach to interrogating this relationship is by incorporating high Z (where Z is the atomic number) elements into binary compounds to maximize spin–orbit coupling. The Mn–Bi system is an appealing platform for these studies since it contains MnBi, a permanent magnet with a large coercive field. We previously identified a new compound in the Mn–Bi system, MnBi 2 , but could not elucidate its magnetic properties ex situ due to its decomposition upon decompression. Here, we harnessed synchrotron X-ray magnetic circular dichroism to probe the magnetism of MnBi 2 at high pressure within a diamond anvil cell. Our results indicate that MnBi 2 exhibits ferromagnetic hysteresis at both 10 K and room temperature. Through calculations and experiments, we show that orbital angular momentum and spin–orbit coupling from Bi impart magnetic anisotropy in MnBi 2 . Comparing the Mn–Bi family of compounds, we consider the Bi p and d orbitals to explain the differences in magnetic behavior within the system. Collectively, these results validate leveraging high-Z elements in the synthesis of new hard permanent magnets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Skyrmion-like Spin Textures Emerging in the Material Derived from Structural Frustration

Magnetic materials with complex spin textures present both fundamental and practical appeal. The complex patterns of magnetic moments emerging on underlying crystal lattices hold potential for robust information storage and processing, including the promise of topological quantum computing. The scope of materials that host such patterns, however, remains rather limited. Here, in this study, we report a discovery of a complex spin texture in a noncentrosymmetric material that emerges from the structural frustration at the boundary between centrosymmetric parent structures MnCoGe (the hexagonal Ni 2 In or the orthorhombic TiNiSi structure type) and MnCoAs (the TiNiSi structure type). Our findings demonstrate that such structural frustration provides a powerful handle for identifying compositional spaces where complex magnetic behavior and associated nontrivial magnetic structures are likely to emerge. Thus, the new phase MnCoGe 1/3 As 2/3 exhibits a modulated cycloidal antiferromagnetic arrangement of electron spins on a noncentrosymmetric lattice (of the hexagonal ZrNiAl type) that materializes in the space between centrosymmetric collinear ferromagnets. This work provides a pathway for discovering novel materials with exotic spin textures for next-generation spintronics and quantum technologies.

Wang, YiXu [Florida State University, Tallahassee,↗

Bridge Connectivity Dictates Spin Interactions and Triplet Pair Dynamics in Intramolecular Singlet Fission

Electron spin plays a critical role in determining the structure, dynamics, and reactivities of molecular excited states, including multiexciton processes such as singlet fission. These systems exhibit triplet pair states whose excited state dynamics can be widely tuned through molecular engineering. For example, the electronic coupling between covalently linked chromophores can be readily modulated using chemical bridges to control proximity, quantum interference, or resonance effects. However, less is known about how spin coupling interactions are impacted by chromophore architecture, and how this influences triplet pair recombination dynamics. Here, in this study, we investigate the role of bridge connectivity and chromophore identity in modulating interchromophore exchange and dipolar coupling interactions for a series of pentacene and tetracene dimers bridged by alternant hydrocarbons (phenylene, naphthalene, anthracene). Using both time-resolved electron paramagnetic resonance and transient absorption spectroscopy, we find that the boundedness and recombination pathways of the triplet pair spins are highly sensitive to molecular architecture and chromophore-specific magnetic dipolar interactions. Notably, nominally ferromagnetic and antiferromagnetic eigenstates result in distinct spin state orderings, consistent with predictions from quantum interference-based graphical models. These findings establish new design principles for tuning spin dynamics in iSF materials, with implications for photonic and quantum information applications.

He, Guiying [City Univ. of New York (CUNY), NY (Un↗

Synergistic Doping and Stabilization of Magnetically Tunable LnTi3(Sb,Sn)4 (Ln: Ce–Gd) Kagome Metals

Here, we present our synthesis and characterization of the LnTi3(Sb,Sn)4 (Ln: Ce, Pr, Nd, Sm, Gd) family of cleavable kagome metals. While these materials are isostructural to the LnTi3Bi4 family, they only form as (Sb,Sn) solid-solutions with no corresponding LnTi3Sb4 or LnTi3Sn4 phases. We use a combination of first-principles density functional theory (DFT) and crystal orbital Hamilton population (COHP) calculations to show that (Sb,Sn) alloying has a stabilizing effect on the structure by adjusting the Fermi level, filling bonding states, depopulating antibonding states, and adjusting the density of states (DOS) toward local minima, an effect we call “synergistic doping.” Through a detailed characterization of the SmTi3(Sb,Sn)4 series, we further demonstrate that the tunable Fermi level has a profound effect on the physical properties. We observe multiple magnetic phases that stem from a competition between antiferromagnetic (AFM) and ferromagnetic-like (FM) ground states. Furthermore, the (Sb,Sn) ratio allows us to tune from direct AFM-FM competition toward a complex admixture with properties reminiscent of the recently discovered TbTi3Bi4. Ultimately, our work demonstrates how the concept of synergistic doping provides a means to stabilize new structures while developing systems with intrinsically tunable chemical, magnetic, and electronic properties.

Ortiz, Brenden [ORNL] (ORCID:0000000213337003)↗