Search NASA⌕ Search

SEARCH · Search NASA

Results for “FLAME”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

A mechanistic study of Soret diffusion in hydrogen-air flames

The separate and combined effects of Soret diffusion of the hydrogen molecule (H{sub 2}) and radical (H) on the structure and propagation speed of the freely-propagating planar premixed flames, and the strain-induced extinction response of premixed and nonpremixed counterflow flames, were computationally studied for hydrogen-air mixtures using a detailed reaction mechanism and transport properties. Results show that, except for the conservative freely-propagating planar flame, Soret diffusion of H{sub 2} increases the fuel concentration entering the flame structure and as such modifies the mixture stoichiometry and flame temperature, which could lead to substantial increase (decrease) of the flame speed for the lean (rich) mixtures respectively. On the other hand, Soret diffusion of H actively modifies its concentration and distribution in the reaction zone, which in turn affects the individual reaction rates. In particular, the reaction rates of the symmetric, twin, counterflow premixed flames, especially at near-extinction states, can be increased for lean flames but decreased for rich flames, whose active reaction regions are respectively located at, and away from, the stagnation surface. However, such a difference is eliminated for the single counterflow flame stabilized by an opposing cold nitrogen stream, as the active reaction zone up to the state of extinction is always located away from the stagnation surface. Finally, the reaction rate is increased in general for diffusion flames because the bell-shaped temperature distribution localizes the H concentration to the reaction region which has the maximum temperature. (author)

08 HYDROGEN↗

A numerical study of the diffusive-thermal instability of opposed nonpremixed tubular flames

The diffusive-thermal (D-T) instability of opposed nonpremixed tubular flames near extinction is investigated here using two-dimensional (2-D) direct numerical simulations together with the linear stability analysis. Two different initial conditions (IC), i.e. the perturbed IC and the C-shaped IC are adopted to elucidate the effects of small and large amplitude disturbances on the formation of flame cells, similar to conditions found in linear stability analysis and experiments, respectively. The characteristics of the D-T instability of tubular flames are identified by a critical Damköhler number, Da C , at which the D-T instability first occurs and the corresponding number of flame cells for three different tubular flames with different flame radii. It is found that Da C predicted through linear stability analysis shows good agreement with that obtained from the 2-D simulations performed with two different ICs. The flame cell number, N cell , from the 2-D simulations with the perturbed IC is also found to be equal to an integer close to the maximum wavenumber, k max , obtained from the linear stability analysis. However, N cell from the 2-D simulations with the C-shaped IC is smaller than k max and N cell found from the simulations with the perturbed IC. This is primarily because the strong reaction at the edges of the horseshoe-shaped cellular flame developed from the C-shaped IC is more likely to produce larger flame cells and reduce N cell . It is also found that for cases with the C-shaped IC, once the cellular instability occurs, the number of flame cells remains constant until global extinction occurs by incomplete reaction manifested by small Da. It is also verified through the displacement speed, S d , analysis that the two edges of the horseshoe-shaped cellular flame are stationary and therefore do not merge due to the diffusion–reaction balance at the edges. Moreover, large negative S d is observed at the local extinction points while small positive or negative S d features in the movement of flame cells as they adjust their location and size towards steady state.

42 ENGINEERING↗

Effects of unburnt reaction progress on stretch flame dynamics under elevated temperatures

Flames in practical combustors and engines are inevitably subject to the effects of upstream chemical reaction progress and stretch, induced by elevated thermodynamic conditions and flow non-uniformities, respectively. Recent shock tube experiments and simulation studies on flame propagation have shown that flame speed under engine-relevant conditions can be enhanced with non-negligible upstream chemical reaction progress, especially when low-temperature heat release is involved in the unburnt mixture. On the other hand, depending on the mixture equivalence ratio and diluents, nonequidiffusion (including the non-unity Lewis number effect and the preferential diffusion effect) can couple with the flame stretch to fundamentally affect the flame propagation, which can manifest as either facilitation or suppression. Depending on the transport property of a reacting mixture, there hence can be either inhibition or promotion from unburnt reaction progress and stretch effects on flame propagation. In the current work, through one-dimensional numerical simulations of transient planar and spherical flames of n-heptane/air under elevated thermodynamic conditions, the combined effects of upstream chemical reaction progress and stretch on flame propagation are investigated. Results show that for both lean and rich n-heptane/air mixtures, flame speed can be substantially promoted with reaction progress, while the rich mixtures can exhibit opposite stretch dependence after first-stage ignition. Different definitions of effective Lewis number are adopted to explain the change in Markstein length for spherical flame in lean and rich mixtures reformed by the low temperature chemistry. Further, this work fills an important gap in laminar premixed flame research relevant to practical combustion systems and can provide useful insight into local turbulent flame behaviors and phi-sensitivity in engine combustion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Large eddy simulation of lean blow-off in swirl-stabilized flame with the subgrid dissipation concept

The lean blow-off mechanism of the premixed swirl flame is numerically investigated by large eddy simulation (LES) with the subgrid dissipation concept (SDC) combustion model. Three simulated cases cover stable, near blow-off, and transient conditions. Compared with the experiment, the LES-SDC approach captures the flow and combustion features for stable and near blow-off conditions. More importantly, the predictions of the blowoff procedure and duration agree satisfactorily with the experiment, indicating that the LES-SDC approach is a promising tool for predicting strong, unsteady turbulent combustion processes. Further, the numerical results are used to investigate the blow-off mechanism. Two stages in the blow-off procedure are specified. The first is the necking and extinction of the downstream flame surface, and the second is the shrinking of the upstream flame surface. The blow-off mechanism is well explained by the theory of stretched flame extinction. At the end of the recirculation zone, the large negative radial velocity pushes the flame to the central line. The combustion process here can be abstracted as the stretched counter-flame of the reactant-reactant configuration. The excessive flame stretch dominates the flame extinction and triggers the blow-off event. The upstream flame resists the intense stretch with the help of hot product recirculation, and the combustion here can be idealized as the counter-flame of the reactant-product configuration. The alignment of the temperature gradient and flow velocity, together with the excessive stretch, clearly indicates the tendency of flame local extinction. A Damköhler number-based blow-off criterion is raised from the mean flow strain rate and laminar flame bulk extinction strain rate.

42 ENGINEERING↗

Visualization of the unburned gas flow field ahead of an accelerating flame in an obstructed square channel

The effect of blockage ratio on the early phase of the flame acceleration process was investigated in an obstructed square cross-section channel. Flame acceleration was promoted by an array of top-and bottom-surface mounted obstacles that were distributed along the entire channel length at an equal spacing corresponding to one channel height. It was determined that flame acceleration is more pronounced for higher blockage obstacles during the initial stage of flame acceleration up to a flame velocity below the speed of sound of the reactants. The progression of the flame shape and flame area was determined by constructing a series of three-dimensional flame surface models using synchronized orthogonal schlieren images. A novel schlieren based photographic technique was used to visualize the unburned gas flow field ahead of the flame front. A small amount of helium gas is injected into the channel before ignition, and the evolution of the helium diluted unburned gas pocket is tracked simultaneously with the flame front. Using this technique the formation of a vortex downstream of each obstacle was observed. The size of the vortex increases with time until it reaches the channel wall and completely spans the distance between adjacent obstacles. A shear layer develops separating the core flow from the recirculation zone between the obstacles. The evolution of oscillations in centerline flame velocity is discussed in the context of the development of these flow structures in the unburned gas. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Visible emission of hydrogen flames

The common misconception that hydrogen flames are not visible is examined. Examples are presented of clearly visible emissions from typical hydrogen flames. It is shown that while visible emissions from these flames are considerably weaker than those from comparable hydrocarbon flames, they are indeed visible, albeit at reduced light levels in most cases. Detailed flame spectra are presented to characterize flame emission bands in the ultraviolet, visible and infrared regions of the spectrum that result in a visible hydrogen flame. The visible blue emission is emphasized, and recorded spectra indicate that fine spectral structure is superimposed on a broadband continuum extending from the ultraviolet into the visible region. Tests were performed to show that this emission does not arise from carbon or nitrogen chemistry resulting from carbon-containing impurities (hydrocarbons) in the hydrogen fuel or from CO{sub 2} or N{sub 2} entrainment from the surrounding air. The spectral structure, however, is also observed in methane flames. The magnitude of the broadband emission increases with flame temperature in a highly nonlinear manner while the finer spectral structure is insensitive to temperature. A comparison of diffusion and premixed H{sub 2} flames shows that the fine scale structure is comparable in both flames. (author)

08 HYDROGEN↗

Structure and behavior of water-laden CH 4 /air counterflow diffusion flames

A counterflow configuration was used to measure thermal and species structure in water-vapor diluted nonpremixed methane–air flames. The motivation is to understand the chemical and thermal effects that water has when it is introduced as a diluent into the fuel side. Here, this work is relevant to combustion processes where water is incorporated naturally in the fuel; e.g., methane hydrates, and when water is added intentionally for emission reduction such as in flares and H 2 O/fuel emulsions combustion. Experimental data are compared to 1-D computations. The agreement is generally very good, but the one dimensional counterflow diffusion model overpredicts flame temperature and major radical, OH, concentration very near extinction in highly diluted H 2 O–methane/air diffusion flames. Changes in flame position, flame width, and peak temperature with the addition of water were measured. Flame temperatures were measured with thin filament pyrometry. OH-PLIF is used to characterize the flame reaction zone with water dilution; the OH distribution, flame position and thickness from the OH-PLIF images were measured. The results show that the OH intensity and reaction zone thickness decreases with the increase in water. Predictions and experiments demonstrate that water mainly acts thermally to lower the flame temperature until extinction. The OH maximum intensity shifts towards the air side of the counterflow burner with water addition. OH is also measured with CO 2 dilution of the fuel stream, and the results are compared with H 2 O addition, including comparisons with the OH molar peak predictions obtained using the GRI 3.0 mechanism and the CHEMKIN Pro one dimensional counterflow model. The study indicates that water’s chemical effects are to change the production and depletion of OH, H and O radicals, especially near extinction. Chemical kinetics simulation of the flame demonstrates good agreement in OH and flame temperatures over a wide range of dilution away from extinction, particularly for CO 2 . Lastly, an over prediction of the water carrying capacity near extinction is found for highly water-diluted flames.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct numerical simulations of premixed and stratified flame propagation in turbulent channel flow

Here, direct numerical simulations are performed to investigate the transient upstream flame propagation (flashback) through homogeneous and fuel-stratified hydrogen-air mixtures transported in fully developed turbulent channel flows. Results indicate that, for both cases, the flame maintains steady propagation against the bulk flow direction, and the global flame shape and the local flame characteristics are both affected by the occurrence of fuel stratification. Globally, the mean flame shape undergoes an abrupt change when the approaching reactants transition from an homogeneous to a stratified mixing configuration. A V-shaped flame surface, whose leading-edge is located in the near-wall region, characterizes the nonstratified, homogeneous mixture case, while a U-shaped flame surface, whose leading edge propagates upstream at the channel centerline, distinguishes the case with fuel stratification (fuel-lean in the near-wall region and fuel-rich away from the wall). The characteristic thickness, wrinkling, and displacement speed of the turbulent flame brush are subject to considerable changes across the channel due to the dependence of the turbulence and mixture properties on the distance from the channel walls. More specifically, the flame transitions from a moderately wrinkled, thin-flamelet combustion regime in the homogeneous mixture case to a strongly wrinkled flame brush more representative of a thickened-flame combustion regime in the near-wall region of the fuel-stratified case. The combustion regime may be related to the Karlovitz number, and it is shown that a nominal channel-flow Karlovitz number, Ka ch in , based on the wall-normal variation of canonical turbulence ( t η =(ν/ε) 1/2 ) and chemistry ( t l = δ l / S l ) timescales in fully developed channel flow, compares well with an effective Karlovitz number, Ka ch fl , extracted from the present DNS datasets using conditionally sampled values of t η and t l in the immediate vicinity of the flame (0.1 < C < 0.3).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Turbulent Flame Propagation Characteristics of High Hydrogen Content Fuels

This final report describes the results of an effort to better understand turbulent flame propagation, especially at conditions relevant to gas turbines employing fuels with syngas or hydrogen mixtures. Turbulent flame speeds were measured for a variety of hydrogen/carbon monoxide (H 2 /CO) and hydrogen/methane (H 2 /CH 4 ) fuel mixtures with air as the oxidizer. The measurements include global consumption speeds (S T,GC ) acquired in a turbulent jet flame at pressures of 1-10 atm and local displacement speeds (S T,LD ) acquired in a low-swirl burner at atmospheric pressure. The results verify the importance of fuel composition in determining turbulent flame speeds. For example, different fuel-air mixtures having the same unstretched laminar flame speed (S L,0 ) but different fuel compositions resulted in significantly different ST,GC for the same turbulence levels (u'). This demonstrates the weakness of turbulent flame speed correlations based simply on u'/S L,0 . The results were analyzed using a steady-steady leading points concept to explain the sensitivity of turbulent burning rates to fuel (and oxidizer) composition. Leading point theories suggest that the premixed turbulent flame speed is controlled by the flame front characteristics at the flame brush leading edge, or, in other words, by the flamelets that advance farthest into the unburned mixture (the so-called leading points). For negative Markstein length mixtures, this is assumed to be close to the maximum stretched laminar flame speed (S L,max ) for the given fuel-oxidizer mixture. For the S T,GC measurements, the data at a given pressure were well-correlated with an SL,max scaling. However the variation with pressure was not captured, which may be due to non-quasi-steady effects that are not included in the current model. For the S T,LD data, the leading points model again faithfully captured the variation of turbulent flame speed over a wide range of fuel-compositions and turbulence intensities. These results provide evidence that the leading points model can provide useful predictions of turbulent flame speed over a wide range of operating conditions and flow geometries.

20 FOSSIL-FUELED POWER PLANTS↗

Blowoff characteristics of bluff-body stabilized conical premixed flames with upstream spatial mixture gradients and velocity oscillations

This experimental study concerns determination of blowoff equivalence ratios for lean premixed conical flames for different mixture approach velocities ranging from 5 to 16 m/s in the presence of spatial mixture gradients and upstream velocity modulation. Conical flames were anchored on a disk-shaped bluff body that was attached to a central rod in the burner nozzle. A combustible propane-air mixture flowed through a converging axisymmetric nozzle with a concentric insert, allowing radial mixture variation by tailoring the composition in the inner and outer parts of the nozzle. The radial mixture profiles were characterized near the location of the flame holder by laser Rayleigh light scattering. Additionally, a loudspeaker at the nozzle base allowed introduction of periodic velocity oscillations with an amplitude of 9% of the mean flow velocity up to a frequency of 350 Hz. The flame blowoff equivalence ratio was experimentally determined by continuously lowering the fuel flow rates and determining the flame detachment point from the flame holder. Flame detachment was detected by a rapid reduction of CH* emission from the flame base imaged by a photomultiplier detector. It was found that the flame blowoff is preceded by progressive narrowing of the flame cone for the case of higher inner jet equivalence ratios. In this case, the fuel-lean outer flow cannot sustain combustion, and clearly this is not a good way of operating a combustor. Nevertheless, the overall blowoff equivalence ratio is reduced by inner stream fuel enrichment. A possible explanation for this behavior is given based on the radial extent of the variable-equivalence-ratio mixture burning near the flame stabilization region. Fuel enrichment in the outer flow was found to have no effect on blowoff as compared to the case of uniform mixture. The results were similar for the whole range of mean flow velocities and upstream excitation frequencies. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Three-dimensional direct numerical simulation of soot formation and transport in a temporally evolving nonpremixed ethylene jet flame

Three-dimensional direct numerical simulation of soot formation with complex chemistry is presented. The simulation consists of a temporally evolving, planar, nonpremixed ethylene jet flame with a validated, 19-species reduced mechanism. A four-step, three-moment, semiempirical soot model is employed. Previous two-dimensional decaying turbulence simulations have shown the importance of multidimensional flame dynamical effects on soot concentration [D.O. Lignell, J.H. Chen, P.J. Smith, T. Lu, C.K. Law, Combust. Flame 151 (1-2) (2007) 2-28]. It was shown that flame curvature strongly impacts the diffusive motion of the flame relative to soot (which is essentially convected with the flow), resulting in soot being differentially transported toward or away from the flame zone. The proximity of the soot to the flame directly influences soot reactivity and radiative properties. Here, the analysis is extended to three dimensions in a temporal jet configuration with mean shear. Results show that similar local flame dynamic effects of strain and curvature are important, but that enhanced turbulent mixing of fuel and oxidizer streams has a first-order effect on transport of soot toward flame zones. Soot modeling in turbulent flames is a challenge due to the complexity of soot formation and transport processes and the lack of detailed experimental soot-flame-flow structural data. The present direct numerical simulation provides the first step toward providing such data. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hysteresis and transition in swirling nonpremixed flames

Strongly swirling nonpremixed flames are known to exhibit a hysteresis when transiting from an attached long, sooty, yellow flame to a short lifted blue flame, and vice versa. The upward transition (by increasing the air and fuel flow rates) corresponds to a vortex breakdown, i.e. an abrupt change from an attached swirling flame (unidirectional or with a weak bluff-body recirculation), to a lifted flame with a strong toroidal vortex occupying the bulk of the flame. Despite dramatic differences in their structures, mixing intensities and combustion performance, both flame types can be realised at identical flow rates, equivalence ratio and swirl intensity. We report here on comprehensive investigations of the two flame regimes at the same conditions in a well-controlled experiment in which the swirl was generated by the rotating outer pipe of the annular burner air passage. Fluid velocity measured with PIV (particle image velocimetry), the qualitative detection of reaction zones from OH PLIF (planar laser-induced fluorescence) and the temperature measured by CARS (coherent anti-Stokes Raman spectroscopy) revealed major differences in vortical structures, turbulence, mixing and reaction intensities in the two flames. We discuss the transition mechanism and arguments for the improved mixing, compact size and a broader stability range of the blue flame in comparison to the long yellow flame. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of CO addition on the characteristics of laminar premixed CH{sub 4}/air opposed-jet flames

The effects of CO addition on the characteristics of premixed CH{sub 4}/air opposed-jet flames are investigated experimentally and numerically. Experimental measurements and numerical simulations of the flame front position, temperature, and velocity are performed in stoichiometric CH{sub 4}/CO/air opposed-jet flames with various CO contents in the fuel. Thermocouple is used for the determination of flame temperature, velocity measurement is made using particle image velocimetry (PIV), and the flame front position is measured by direct photograph as well as with laser-induced predissociative fluorescence (LIPF) of OH imaging techniques. The laminar burning velocity is calculated using the PREMIX code of Chemkin collection 3.5. The flame structures of the premixed stoichiometric CH{sub 4}/CO/air opposed-jet flames are simulated using the OPPDIF package with GRI-Mech 3.0 chemical kinetic mechanisms and detailed transport properties. The measured flame front position, temperature, and velocity of the stoichiometric CH{sub 4}/CO/air flames are closely predicted by the numerical calculations. Detailed analysis of the calculated chemical kinetic structures reveals that as the CO content in the fuel is increased from 0% to 80%, CO oxidation (R99) increases significantly and contributes to a significant level of heat-release rate. It is also shown that the laminar burning velocity reaches a maximum value (57.5 cm/s) at the condition of 80% of CO in the fuel. Based on the results of sensitivity analysis, the chemistry of CO consumption shifts to the dry oxidation kinetics when CO content is further increased over 80%. Comparison between the results of computed laminar burning velocity, flame temperature, CO consumption rate, and sensitivity analysis reveals that the effect of CO addition on the laminar burning velocity of the stoichiometric CH{sub 4}/CO/air flames is due mostly to the transition of the dominant chemical kinetic steps. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of fuel type and equivalence ratios on the flickering of triple flames

An experimental study has been conducted in axisymmetric, co-flowing triple flames with different equivalence ratios of the inner and outer reactant streams (2<{phi}{sub in}<3 and 0{<=}{phi}{sub out}<0.7). Different fuel combinations, like propane/propane, propane/methane or methane/methane in the inner and outer streams respectively, have been used in the experiments. The structures of the triple flames have been compared for the different fuel combinations and equivalence ratios. The conditions under which triple flames exhibit oscillation have been identified. During the oscillation, the non-premixed flame and the outer lean premixed flame flicker strongly, while the inner rich premixed flame remains more or less stable. The flickering frequency has been evaluated through image processing and fast Fourier transform (FFT) of the average pixel intensity of the image frames. It is observed that, for all the fuel combinations, the frequency decreases with the increase in the outer equivalence ratio, while it is relatively invariant with the change in the inner equivalence ratio. However, an increase in the inner equivalence ratio affects the structure of the flame by increasing the heights of the inner premixed flame and non-premixed flame and also enlarges the yellow soot-laden zone at the tip of the inner flame. A scaling analysis of the oscillating flames has been performed based on the measured parameters, which show a variation of Strouhal number (St) with Richardson number (Ri) as St {proportional_to} Ri{sup 0.5}. The fuel type is found to have no influence on this correlation. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanisms of Flame Stabilization and Blowout in a Reacting Turbulent Hydrogen Jet in Cross-Flow

The mechanisms contributing to flame stabilization and blowout in a nitrogen-diluted hydrogen transverse jet in a turbulent boundary layer cross-flow (JICF) are investigated using three-dimensional direct numerical simulation (DNS) with detailed chemistry. Non-reacting JICF DNS were performed to understand the relative magnitude and physical location of low velocity regions on the leeward side of the fuel jet where a flame can potentially anchor. As the injection angle is reduced from 90{sup o} to 70{sup o}, the low velocity region was found to diminish significantly, both in terms of physical extent and magnitude, and hence, its ability to provide favorable conditions for flame anchoring and stabilization are greatly reduced. In the reacting JICF DNS a stable flame is observed for 90{sup o} injection angle and, on average, the flame root is in the vicinity of low velocity magnitude and stoichiometric mixture. When the injection angle is smoothly transitioned to 75{sup o} a transient flame blowout is observed. Ensemble averaged quantities on the flame base reveal two phases of the blowout characterized by a kinematic imbalance between flame propagation speed and flow normal velocity. In the first phase dominant flow structures repeatedly draw the flame base closer to the jet centerline resulting in richer-than-stoichiometric mixtures and high velocity magnitudes. In the second phase, in spite of low velocity magnitudes and a return to stoichiometry, due to jet bending and flame alignment normal to the cross-flow, the flow velocity normal to the flame base increases dramatically perpetuating the blowout.

08 HYDROGEN↗

A New Type of Steady and Stable, Laminar, Premixed Flame in Ultra-Lean, Hydrogen-Air Combustion

Ultra-lean, hydrogen-air mixtures are found to support another kind of laminar flame that is steady and stable beside flat flames and flame balls. Direct numerical simulations are performed of flames that develop into steadily and stably propagating cells. These cells were the original meaning of the word"flamelet'' when they were observed in lean flammability studies conducted early in the development of combustion science. Several aspects of these two-dimensional flame cells are identified and are contrasted with the properties of one-dimensional flame balls and flat flames. Although lean hydrogen-air flames are subject to thermo-diffusive effects, in this case the result is to stabilize the flame rather than to render it unstable. The flame cells may be useful as basic components of engineering models for premixed combustion when the other types of idealized flames are inapplicable.

08 HYDROGEN↗

Computational Flame Diagnostics for Direct Numerical Simulations with Detailed Chemistry of Transportation Fuels

The goal of the proposed research is to create computational flame diagnostics (CFLD) that are rigorous numerical algorithms for systematic detection of critical flame features, such as ignition, extinction, and premixed and non-premixed flamelets, and to understand the underlying physicochemical processes controlling limit flame phenomena, flame stabilization, turbulence-chemistry interactions and pollutant emissions etc. The goal has been accomplished through an integrated effort on mechanism reduction, direct numerical simulations (DNS) of flames at engine conditions and a variety of turbulent flames with transport fuels, computational diagnostics, turbulence modeling, and DNS data mining and data reduction. The computational diagnostics are primarily based on the chemical explosive mode analysis (CEMA) and a recently developed bifurcation analysis using datasets from first-principle simulations of 0-D reactors, 1-D laminar flames, and 2-D and 3-D DNS (collaboration with J.H. Chen and S. Som at Argonne, and C.S. Yoo at UNIST). Non-stiff reduced mechanisms for transportation fuels amenable for 3-D DNS are developed through graph-based methods and timescale analysis. The flame structures, stabilization mechanisms, local ignition and extinction etc., and the rate controlling chemical processes are unambiguously identified through CFLD. CEMA is further employed to segment complex turbulent flames based on the critical flame features, such as premixed reaction fronts, and to enable zone-adaptive turbulent combustion modeling.

42 ENGINEERING↗