SEARCH · Search NASA

Results for “FREE BOUNDARY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

All sources NASA NTRS DOE OSTI

DOE OSTI2020

UT-GOM2-2 Drilling Fluid (Technical Note)

It is proposed that a salt-saturated, water-based mud might improve borehole stability for UT-GOM2-2 relative to a fresh-water-based mud. However, the primary objective for UT-GOM2-2 is to safely and successfully acquire uncompromised hydrate-bearing sediment cores. This can only be done if conditions stay within the hydrate stability zone, and well away from the hydrate stability boundary. The addition of salt to the drilling mud, shifts the hydrate stability boundary closer to estimated conditions. This shift, by some estimates of pressure and temperature, where conditions now fall outside of the hydrate stability zone, may result in borehole enlargement and the release of free gas into the borehole. This shift by all estimates, even when coring conditions stay inside the hydrate stability zone, shrinks the window between the estimated conditions and the hydrate stability boundary. This shift is likely to compromise the hydrate-bearing cores while they are being recovered from the bottom-hole to the rig floor. In this report we present two examples: 1) Assuming temperature and pressure from in-situ estimates: Hydrate within the target reservoirs (Orange and Blue) at Walker Ridge Block 313 (WR 313) will be outside the hydrate stability zone in the presence of a drilling mud with 9.5 wt.% salinity (the salinity of the proposed 10.5 ppg salt-based mud) at in situ pressure and temperature. Thus, the hydrate will be unstable. A 10.5 ppg salt-based mud may result in dissociation of the hydrate into its components: water and gas. 10.5 ppg salt-based mud may enlarge the borehole, release free gas into the borehole, and compromise the cores. 2) Assuming temperatures equal to the measured LWD borehole temperatures at this location: Hydrate within the target reservoirs will be stable with a salinity of 9.5 wt.% (the salinity of the proposed 10.5 ppg salt-based mud), but possibly unstable (just at the methane hydrate stability boundary) for a salinity of 17.2 wt.% (the salinity of the proposed 13.5 ppg salt-based kill mud). if the borehole has the same temperature as recorded during previous LWD drilling at this location. A 13.5 ppg salt-based kill mud may destabilize the borehole. More importantly, a 10.5 ppg salt-based mud does not provide a large enough window between the estimated conditions and the hydrate stability boundary. Core temperatures and pressures fluctuate from the bottom-hole conditions as the core is brought up from the bottom-hole to the rig floor. These fluctuations are likely to cause the hydrate in the cores to touch or cross the stability boundary. Therefore, cores captured using a 10.5 ppg salt-based mud are likely to be compromised during core recovery to the rig floor.

03 NATURAL GAS↗

DOE OSTI2025

Variationally consistent Maxwell stress in flexoelectric structures under finite deformation and immersed in free space

Maxwell stress refers to the mechanical stress exerted on a dielectric material due to the presence of electric fields. It plays a significant role in the interaction between a dielectric material and the surrounding free space under finite deformation. Previous research on finite deformation of flexoelectricity mainly adopted a modified form of Maxwell stress, potentially not able to correctly capture some physical phenomena, such as the compression of a dielectric droplet in an electric field. In this work, we propose a consistent and complete variational principle for flexoelectricity, in which the Maxwell stress emerges naturally from the derivation, without introducing additional assumptions. An Isogeometric analysis-based numerical framework is developed accordingly and verified by both linear and nonlinear benchmark cases compared with experimental results. The present framework successfully captures and quantifies the behaviors of conductive liquids and soft dielectric solids subjected to an external electric field. Finally, a novel scenario is investigated in which a flexoelectric beam immersed in free space is analyzed, showing the interesting distribution of Maxwell stress-induced tractions at opposing boundaries. The test demonstrates that a higher dielectric constant can effectively enhance the material's stiffness in response to the external electric loading.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Creating free standing covalent organic framework membranes by nanocrystal suturing in sol gel solutions

The sol-gel synthesis represents a versatile platform to fabricate ceramic inorganic membranes. However, it is still a grand challenge to push the boundary of sol-gel chemistry towards high-quality organic membrane construction. Herein, a facile and controlled nanocrystal suturing strategy in sol-gel solutions is developed to afford highly crystalline and free-standing covalent organic framework membranes. The key chemistry design lies in deploying tiny threads (1 mol% dual-NH 2 -tail linear polymer) to efficiently suture the highly charged covalent organic framework nanocrystals stabilized and confined in sol-gel solutions, creating a continuous and intact membrane surface. A subsequent treatment heals the sutured covalent organic framework nanocrystals, yielding a free-standing membrane with high crystallinity and ordered pores. The structure evolution and role of the thread linker are elucidated via operando spectroscopy and microscopy. The as-afforded covalent organic framework membranes demonstrate attractive proton transport performance in high temperature and anhydrous fuel cell applications.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Electric field effects during disruptions

Tokamak disruptions are associated with breaking magnetic surfaces, which makes magnetic field lines chaotic in large regions of the plasma. The enforcement of quasi-neutrality in a region of chaotic field lines requires an electric potential that has both short and long correlation distances across the magnetic field lines. The short correlation distances produce a Bohm-like diffusion coefficient ∼Te/eB and the long correlation distances aT produce a large scale flow ∼Te/eBaT. This cross-field diffusion and flow are important for sweeping impurities into the core of a disrupting tokamak. The analysis separates the electric field in a plasma into the sum of a divergence-free, E→B, and a curl-free, E→q, part, a Helmholtz decomposition. The divergence-free part of E→ determines the evolution of the magnetic field. The curl-free part enforces quasi-neutrality, E→q=−∇→Φq. Magnetic helicity evolution gives the required boundary condition for a unique Helmholtz decomposition and an unfortunate constraint on steady-state tokamak maintenance.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

Progress from ASDEX Upgrade experiments in preparing the physics basis of ITER operation and DEMO scenario development

An overview of recent results obtained at the tokamak ASDEX Upgrade (AUG) is given. A work flow for predictive profile modelling of AUG discharges was established which is able to reproduce experimental H-mode plasma profiles based on engineering parameters only. In the plasma center, theoretical predictions on plasma current redistribution by a dynamo effect were confirmed experimentally. For core transport, the stabilizing effect of fast ion distributions on turbulent transport is shown to be important to explain the core isotope effect and improves the description of hollow low-Z impurity profiles. The L–H power threshold of hydrogen plasmas is not affected by small helium admixtures and it increases continuously from the deuterium to the hydrogen level when the hydrogen concentration is raised from 0 to 100%. One focus of recent campaigns was the search for a fusion relevant integrated plasma scenario without large edge localised modes (ELMs). Results from six different ELM-free confinement regimes are compared with respect to reactor relevance: ELM suppression by magnetic perturbation coils could be attributed to toroidally asymmetric turbulent fluctuations in the vicinity of the separatrix. Stable improved confinement mode plasma phases with a detached inner divertor were obtained using a feedback control of the plasma β. The enhanced D α H-mode regime was extended to higher heating power by feedback controlled radiative cooling with argon. The quasi-coherent exhaust regime was developed into an integrated scenario at high heating power and energy confinement, with a detached divertor and without large ELMs. Small ELMs close to the separatrix lead to peeling-ballooning stability and quasi continuous power exhaust. Helium beam density fluctuation measurements confirm that transport close to the separatrix is important to achieve the different ELM-free regimes. Based on separatrix plasma parameters and interchange-drift-Alfvén turbulence, an analytic model was derived that reproduces the experimentally found important operational boundaries of the density limit and between L- and H-mode confinement. Feedback control for the X-point radiator (XPR) position was established as an important element for divertor detachment control. Stable and detached ELM-free phases with H-mode confinement quality were obtained when the XPR was moved 10 cm above the X-point. Investigations of the plasma in the future flexible snow-flake divertor of AUG by means of first SOLPS-ITER simulations with drifts activated predict beneficial detachment properties and the activation of an additional strike point by the drifts.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

Anharmonic thermodynamic properties and phase boundary across the postperovskite transition in MgSi O 3

To address the effects of lattice anharmonicity across the perovskite to postperovskite transition in MgSiO 3 , we conduct calculations using the phonon quasiparticle (PHQ) approach. The PHQ is based on abinitio molecular dynamics and, in principle, captures full anharmonicity. Free energies in the thermodynamic limit (N → ∞) are computed using temperature-dependent quasiparticle dispersions within the phonon gas model. Systematic results on anharmonic thermodynamic properties and phase boundary are reported. Both the local density approximation and the generalized gradient approximation calculations are performed to provide confident constraints on these properties. Anharmonic effects are demonstrated by comparing results with those obtained using the quasiharmonic approximation (QHA). The inadequacy of the QHA is indicated by its overestimation of thermal expansivity and thermodynamic Grüneisen parameter and its converged isochoric heat capacity in the high-temperature limit. The PHQ phase boundary has a Clapeyron slope (dP/dT) that increases with temperature. This result contrasts with the nearly zero curvature of the QHA phase boundary. Anharmonicity bends the phase boundary to lower temperatures at high pressures. Implications for the double-crossing of the phase boundary by the mantle geotherm are discussed.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Transforming a Simple Structure Model to Represent a Complex Dynamic System with Unknown Boundary Restraints

Imposing a boundary condition on a structure can significantly alter its dynamic properties. However, sometimes the specifics of the new boundary conditions are not known. When the effects of a boundary condition are uncertain or there is not enough information, engineers need to excite the complex structure to obtain these modified properties. In order to experimentally obtain the new properties, engineers need multiple experiments and many outputs for interpolation in order to sufficiently represent the entire structure. In this study, the researchers attached a stinger to a cantilever beam, acting as a new transverse restraint of unknown properties. This paper presents a conversion expression that predicts the dynamic behavior of any point in the system with the new boundary condition. This expression relies only on one impact hammer experiment with one output and the model of the stinger-free cantilever beam, referred to as the simple structure. Researchers estimated the Transfer Function (TRF) of the beam and compared it with an experimentally measured TRF to validate the method. The mean absolute error of the estimated TRF compared to the experimental TRF is 1.99 dB. This demonstrates the use of the proposed method for estimating unmeasured TRFs in a system with an uncertain boundary condition using a single input, single output (SISO) test and a model of the simple structure.

42 ENGINEERING↗

DOE OSTI2021

Mutual information superadditivity and unitarity bounds

We derive the property of strong superadditivity of mutual information arising from the Markov property of the vacuum state in a conformal field theory and strong subadditivity of entanglement entropy. We show this inequality encodes unitarity bounds for different types of fields. These unitarity bounds are precisely the ones that saturate for free fields. This has a natural explanation in terms of the possibility of localizing algebras on null surfaces. A particular continuity property of mutual information characterizes free fields from the entropic point of view. We derive a general formula for the leading long distance term of the mutual information for regions of arbitrary shape which involves the modular flow of these regions. We obtain the general form of this leading term for two spheres with arbitrary orientations in spacetime, and for primary fields of any tensor representation. For free fields we further obtain the explicit form of the leading term for arbitrary regions with boundaries on null cones.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2022

Final Scientific/Technical Report-FREE-piston Zero Emissions Refrigerator (FREEZER)

The FREE-piston Zero Emissions Refrigerator (FREEZER™) is a natural refrigerant Stirling-cycle cooler developed by AMSC in partnership with Heatcraft, targeted as a replacement refrigeration system for walk-in coolers or freezers found commonly in restaurants, convenience stores, supermarkets, etc. The FREEZER™, combined with a closed-loop CO2 heat-transfer system, had the goal to provides an efficient (Target COP = 1.4), zero ODP (Ozone Depletion Potential) and near zero GWP (Global Warming Potential) refrigeration solution with no synthetic, flammable, or toxic refrigerants. Other near zero GWP refrigeration systems do not exist at the scale and performance level of FREEZER. ARPA-E Continuation Funding enabled the design and fabrication of one Advanced Development Unit (ADU) cooler and two Field Test Unit (FTU) coolers, and a new revised Field Test Unit (new FTU). Heatcraft was to extensively test the various coolers at their facilities, which closely simulate real-world conditions. The original plan was to install and operate FREEZER FTUs alongside a traditional cooling solution at one or more customer locations to obtain data on direct performance comparisons with existing commercial refrigeration systems. Success in this FREEZER refinement and field-test project will establish the basis for a new class of environmentally friendly refrigeration systems that will revolutionize the industry. The hardware developed under the program is shown below in Figure 1. Five Stirling-cycle machines were built within the program, with a sixth cooler still under construction. The original DU and the ADU coolers met the performance target with a coefficient of performance (COP) of 1.2. The FTU was underperforming during the initial tuning of the free-piston Stirling cycle dynamics when there was a catastrophic failure of the fasteners on pressure boundary. This caused a pause to the program while the failure mechanism was investigated. The root cause was an inadequate flange design that allowed an excessive cyclic loading on the fasteners, leading to a fatigue failure. It was determined that existing FTU design could not be reasonably salvaged in a safe manner, and that fact, combined with the lower-than-expected performance of the new experimental heat exchanger modules lead to the design of the “new FTU” with a more conventional shell-and-tube heat exchanger design which should get close to the design target COP of 1.4, but have a higher overall machine cost. The program ran out of time before the fabrication of the new FTU was completed, but AMSC is still working on the cooler, with the majority of the parts fabricated, and hopes to have the unit under test sometime in early 2022, after which it will be shipped to Heatcraft for additional testing.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2020

Controlling colloidal crystals via morphing energy landscapes and reinforcement learning

We report a feedback control method to remove grain boundaries and produce circular shaped colloidal crystals using morphing energy landscapes and reinforcement learning–based policies. We demonstrate this approach in optical microscopy and computer simulation experiments for colloidal particles in ac electric fields. First, we discover how tunable energy landscape shapes and orientations enhance grain boundary motion and crystal morphology relaxation. Next, reinforcement learning is used to develop an optimized control policy to actuate morphing energy landscapes to produce defect-free crystals orders of magnitude faster than natural relaxation times. Morphing energy landscapes mechanistically enable rapid crystal repair via anisotropic stresses to control defect and shape relaxation without melting. This method is scalable for up to at least N = 10 3 particles with mean process times scaling as N 0.5 . Further scalability is possible by controlling parallel local energy landscapes (e.g., periodic landscapes) to generate large-scale global defect-free hierarchical structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Effect of Sn oxides on the thermal conductivity of polycrystalline SnSe

SnSe is a promising thermoelectric material, with intrinsically low lattice thermal conductivity, κL. Surprisingly, in several reports, polycrystalline samples are found to have a higher thermal conductivity than single crystals. This disparity has been attributed to trace amounts of thermally conductive Sn oxides at the grain boundaries of polycrystalline samples. The same culprit was recently proposed to explain the reduction of κL in purified, oxide-free, SnSe polycrystals. Here, we test this hypothesis by: (i) tuning the type of oxide in SnSe by exploiting thermodynamic stability regions, since Sn-rich or Sn-poor compositions favour the formation of SnO or SnO 2 , respectively; and (ii) varying the quantity of SnO 2 by intentionally oxidizing SnSe powder before consolidation, to obtain samples with quantifiable amounts - up to 15% - of SnO 2 . We find that the κL of SnSe is impervious to changes in the type or the amount of Sn oxide present in the samples. Our results show that a simple “rule of mixtures” cannot be used to estimate the effect of grain boundary oxides on the thermal conductivity of SnSe. These results call for an improved understanding of the intriguing thermal transport mechanisms in SnSe and numerous other systems where a two-phase transport is presumed.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Emergent biaxiality in chiral hybrid liquid crystals

Biaxial nematic liquid crystals are fascinating systems sometimes referred to as the Higgs boson of soft matter because of experimental observation challenges. Here we describe unexpected states of matter that feature biaxial orientational order of colloidal supercritical fluids and gases formed by sparse rodlike particles. Colloidal rods with perpendicular surface boundary conditions exhibit a strong biaxial symmetry breaking when doped into conventional chiral nematic fluids. Minimization of free energy prompts these particles to orient perpendicular to the local molecular director and the helical axis, thereby imparting biaxiality on the hybrid molecular-colloidal system. The ensuing phase diagram features colloidal gas and liquid and supercritical colloidal fluid states with long-range biaxial orientational symmetry, as supported by analytical and numerical modeling at all hierarchical levels of ordering. Unlike for nonchiral hybrid systems, dispersions in chiral nematic hosts display biaxial orientational order at vanishing colloid volume fractions, promising both technological and fundamental research utility.

Colloids↗

DOE OSTI2020

Observed Sensitivity of Low-Cloud Radiative Effects to Meteorological Perturbations over the Global Oceans

Understanding how marine low clouds and their radiative effects respond to changing meteorological conditions is crucial to constrain low-cloud feedbacks to greenhouse warming and internal climate variability. In this paper, we use observations to quantify the low-cloud radiative response to meteorological perturbations over the global oceans to shed light on physical processes governing low-cloud and planetary radiation budget variability in different climate regimes. We assess the independent effect of perturbations in sea surface temperature, estimated inversion strength, horizontal surface temperature advection, 700-hPa relative humidity, 700-hPa vertical velocity, and near-surface wind speed. Stronger inversions and stronger cold advection greatly enhance low-level cloudiness and planetary albedo in eastern ocean stratocumulus and midlatitude regimes. Warming of the sea surface drives pronounced reductions of eastern ocean stratocumulus cloud amount and optical depth, and hence reflectivity, but has a weaker and more variable impact on low clouds in the tropics and middle latitudes. By reducing entrainment drying, higher free-tropospheric relative humidity enhances low-level cloudiness. At low latitudes, where cold advection destabilizes the boundary layer, stronger winds enhance low-level cloudiness; by contrast, wind speed variations have weak influence at midlatitudes where warm advection frequently stabilizes the marine boundary layer, thus inhibiting vertical mixing. These observational constraints provide a framework for understanding and evaluating marine low-cloud feedbacks and their simulation by models.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Biomass burning and marine aerosol processing over the southeast Atlantic Ocean: a TEM single-particle analysis

This study characterizes single-particle aerosol composition from filters collected during the ObseRvations of Aerosols above CLouds and their intEractionS (ORACLES) and CLoud–Aerosol–Radiation Interaction and Forcing: Year 2017 (CLARIFY-2017) campaigns. In particular the study describes aged biomass burning aerosol (BBA), its interaction with the marine boundary layer and the influence of biomass burning (BB) air on marine aerosol. The study finds evidence of BBA influenced by marine boundary layer processing as well as sea salt influenced by BB air. Secondary chloride aerosols were observed in clean marine air as well as in BB-influenced air in the free troposphere. Higher-volatility organic aerosol appears to be associated with increased age of biomass burning plumes, and photolysis or oxidation may be a mechanism for the apparent increased volatility. Aqueous processing and interaction with the marine boundary layer air may be a mechanism for the presence of sodium on many aged potassium salts. By number, biomass burning potassium salts and modified sea salts are the most observed particles on filter samples. The most commonly observed BC coatings are inorganic salts. These results suggest that atmospheric processes such as photolysis, oxidation and cloud processing are key drivers in the elemental composition and morphology of aged BBA. Fresh BBA inorganic salt content, as it has an important role in the particles' ability to uptake water, may be a key driver in how aqueous processing and atmospheric aging proceed.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Microstructure and in-service degradation of baffle former bolts – in-core components of light water reactors

This report presents a microstructure evaluation of the baffle former bolt, a commercial pressurized water reactor component. Using SEM, EDS, and EBSD analysis the material was identified as AISI 316 steel with an annealed austenite microstructure. Findings include abnormal grain growth in a fraction of the grains and the absence of retained ferrite. Notable observations include an overlapping of pre- and post-irradiation deformation, including defect-free channel formation as an active deformation mechanism in the near-surface layer of BFB. Specimen surfaces, exposed to high-temperature, high-pressure water, exhibited signs of in-service corrosion degradation. EBSD and EDS analyses highlighted intergranular corrosion, possible grain boundary oxidation with depths less than 3 µm, and, unexpectedly, short cracks filled with Cr-rich oxides measuring around 5-6 µm. The presence of defect-free channels from EBSD data suggests episodes of high mechanical stresses during service. The specimens provide a potentially unique insight into the in-service degradation of NPP components, strain localization, and crack initiation processes. An intact corrosion layer reveals a complex component's in-service history. Further research is underway for a detailed analysis.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2020

Thermal Hall conductance and a relative topological invariant of gapped two-dimensional systems

We derive a Kubo-like formula for the thermal Hall conductance of a 2d lattice systems which is free from ambiguities associated with the definition of energy magnetization. We use it to define a relative topological invariant of gapped 2d lattice systems at zero temperature. Up to a numerical factor, it can be identified with the difference of chiral central charges for the corresponding edge modes. This establishes the bulk-boundary correspondence for the chiral central charge. Here, we also show that for any local commuting projector Hamiltonian, the relative chiral central charge vanishes, while for free fermionic systems, it is related to the zero-temperature electric Hall conductance via the Wiedemann-Franz law.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2025

Liquid Phase Modeling in Porous Media: Adsorption of Methanol and Ethanol in H-MFI in Condensed Water

Zeolites are used in the chemical and separation industries for their exceptional selectivity, adsorption capacity, regenerability, and stability in gas and liquid phase processing. Here, we developed an explicit solvation method for predicting solvent/condensed phase effects on adsorption free energies in microporous media such as zeolites based on the hybrid quantum mechanical/molecular mechanical free energy perturbation (QM/MM-FEP) technique. Our explicit solvation method for zeolite systems, called eSZS, aims to capture site-specific interactions during the adsorption process at the Brønsted acid sites of H-MFI zeolite while still considering the diverse configuration space of the solvent molecules. This strategy is ideal for chemical reactions or adsorbates that interact with the microporous medium in few distinct adsorbate/transition state configurations, i.e., the harmonic or similar approximations are acceptable for the adsorbate/transition state while such approximations break down for the solvent molecules that require extensive configuration space sampling. In this way, our approach effectively overcomes the limitations of implicit solvation models and classical force field methods for describing solvation effects on chemical reactions within porous materials such as zeolites. Specifically, in this study, we investigated various aspects of our hybrid QM/MM approach, including QM cluster size dependencies in a periodic electrostatically embedded cluster model (PEECM), rules for link atoms at the QM/MM boundary, and functional and basis set considerations for converged and reasonably accurate gas and aqueous phase methanol and ethanol adsorption free energy predictions in H-MFI. For gas phase adsorption of methanol and ethanol in H-MFI at a Brønsted acid site in T12 position, we compute adsorption free energies at 298 K of −0.61 and −0.75 eV, respectively, using a PEECM containing 50 Si and 1 Al atom with ωB97x-D/def2-TZVP level of theory. For solvent effect calculations, we sample the aqueous phase using grand canonical Monte Carlo (GCMC) simulations to (1) obtain a mean field of electrostatic interactions in the reaction system and (2) perform a rigorous free energy perturbation calculation. Similar to the experimentally and computationally observed endergonic solvation effects observed for hydrocarbon adsorption on metal surfaces, we also observe that a condensed aqueous environment destabilizes methanol and ethanol at these acid sites in H-MFI at 298 K. Specifically, the computed solvation free energies of adsorption (ΔΔG solv ) for methanol and ethanol are +0.44 and +0.54 eV, respectively. From this study, it is evident that adsorbates (methanol and ethanol) are competing with water for adsorption space inside the H-MFI zeolite, leading to an endergonic solvation effect. Here, we expect that the endergonic, aqueous solvent effect during adsorption in microporous zeolites is highly tunable by changing the pore size and hydrophobicity of the microporous material as this will affect the water density inside the pore structure.

Adsorption↗

DOE OSTI2022

Assessing free tropospheric quasi-equilibrium for different GCM resolutions using a cloud-resolving model simulation of tropical convection

Abstract This study examines the free-tropospheric quasi-equilibrium at different global climate model (GCM) resolutions using the simulation of tropical convection by a cloud-resolving model during the Tropical Western Pacific International Cloud Experiment. The simulated dynamic and thermodynamic fields within the model domain are averaged over subdomains of different sizes equivalent to different GCM resolutions. These coarse-grained fields are then used to compute CAPE and its change with time, and their relationships with simulated convection. Results show that CAPE change with time is controlled predominantly by variations of thermodynamic properties in the planetary boundary layer for all subdomain sizes ranging from 64 to 4 km. Lag correlation analysis shows that CAPE generation by the free-tropospheric dynamical advection (dCAPE ls ) leads convective precipitation but is in phase with convective mass flux at 600 mb and 500 mb vertical velocity for all subdomain sizes. However, the correlation coefficients and regression slopes decrease as the subdomain size decreases for subdomain sizes smaller than 16 km. This is probably due to increased randomness of convection and more scale-dependence of the relationships when the subdomain size reaches the grey zone. By examining the sensitivity of the relationships of convection with dCAPE ls to temporal scales in different subdomain size, it shows that the quasi-equilibrium between dCAPE ls and convection holds well for timescales of 30 min or longer at all subdomain sizes. These results suggest that the free tropospheric quasi-equilibrium assumption may still be useable even for GCM resolutions in the grey zone.

54 ENVIRONMENTAL SCIENCES↗