Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fermi level”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Alkali Metal Induced Two Dimensional Electron Systems at Cleaved Surfaces of InAs

The authors have performed low-temperature in-plane magnetotransport measurements on two-dimensional electron systems induced by deposition of Cs or Na at in situ cleaved surfaces of p-type InAs. The coverage dependence of the surface electron density N{sub s} strongly supports a simple model based on a surface donor level lying above the conduction band minimum. The maximum Fermi level positions obtained from the saturation values of N{sub s} are compared to those of previous photoelectron spectroscopy measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Semi-insulating 4H-SiC layers formed by the implantation of high-energy (53 MeV) argon ions into n-type epitaxial films

It is shown that 9-μm-thick semi-insulating surface layers can be formed in moderately doped n-type silicon carbide (donor concentration 2 × 10{sup 16} cm{sup –3}) via the comparatively low-dose (7 × 10{sup 11} cm{sup –2}) implantation of high-energy (53 MeV) argon ions. The free-carrier removal rate is estimated at ~10{sup 4} cm{sup –1}. The resistivity of the semi-insulator is no less than 7 × 10{sup 12} Ω cm. Analysis of the monopolar current of electron injection into the semi-insulator shows that the impurity-conductivity compensation is due to radiation induced defects pinning the equilibrium Fermi level at a depth of 1.16 eV below the conduction-band bottom. The density of defect states at the Fermi level is 2.7 × 10{sup 16} cm{sup 2} eV{sup –1}.

36 MATERIALS SCIENCE↗

Disorder induced interface states and their influence on the Al/Ge nanowires Schottky devices

It has been demonstrated that the presence of oxide monolayers in semiconductor surfaces alters the electronic potential at surfaces and, consequently, can drastically affect the electronic transport features of a practical device such as a field effect transistor. In this work experimental and theoretical approaches to characterize Al/germanium nanowire Schottky devices by using samples covered with a thin oxide layer (2 nm width) were explored. It was also demonstrated that the oxide layer on Ge causes a weak dependence of the metal work function on Schottky barrier heights indicating the presence of Fermi level pinning. From theoretical calculations the pinning factor S was estimated to range between 0.52 and 0.89, indicating a weak Fermi level pinning which is induced by the presence of charge localization at all nanowires' surface coming from interface states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Epitaxial Cr on n-SrTiO{sub 3}(001) - An ideal Ohmic contact

Epitaxial Cr metallizations grown on n-SrTiO{sub 3}(001) by molecular beam epitaxy are shown to result in an ordered interface with Cr bound to O in the terminal TiO{sub 2} layer, no reduction of the SrTiO{sub 3}, and a near-perfect Ohmic contact. Cr/n-SrTiO{sub 3}(001) thus constitutes an ideal interface between a pure metal and wide gap oxide in which interface redox chemistry does not occur, and the Fermi level remains unpinned.

36 MATERIALS SCIENCE↗

Reconstructed Fermi Surface of Underdoped Bi2Sr2CaCu2O8 Cuprate Superconductors

The Fermi surface topologies of underdoped samples of the high-T{sub c} superconductor Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8+{delta}} have been measured with angle resolved photoemission. By examining thermally excited states above the Fermi level, we show that the observed Fermi surfaces in the pseudogap phase are actually components of fully enclosed hole pockets. The spectral weight of these pockets is vanishingly small at the magnetic zone boundary, creating the illusion of Fermi 'arcs.' The area of the pockets as measured in this study is consistent with the doping level, and hence carrier density, of the samples measured. Furthermore, the shape and area of the pockets is well reproduced by phenomenological models of the pseudogap phase as a spin liquid.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Strong deviations from jellium behavior in the valence electron dynamics of potassium

We present experimental and ab initio theoretical determination of the dynamics of valence electrons in potassium by investigating the dynamical structure factor at nonvanishing momentum transfers. The spectra show large deviations from a jellium-type behavior due to the presence of d-type states above the Fermi level. In particular, we identify two well-defined interband excitations that have a direct correspondence with the density of states above the Fermi level.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tuning electron transport through a single molecular junction by bridge modification

The possibility of controlling electron transport in a single molecular junction represents the ultimate goal of molecular electronics. Here, we report that the modification of bridging group makes it possible to improve the performance and obtain new functions in a single cross-conjugated molecular junction, designed from a recently synthesized bipolar molecule bithiophene naphthalene diimide. Our first principles results show that the bipolar characteristic remains after the molecule was modified and sandwiched between two metal electrodes. Rectifying is the intrinsic characteristic of the molecular junction and its performance can be enhanced by replacing the saturated bridging group with an unsaturated group. A further improvement of the rectifying and a robust negative differential resistance (NDR) behavior can be achieved by the modification of unsaturated bridge. It is revealed that the modification can induce a deviation angle about 4° between the donor and the acceptor π-conjugations, making it possible to enhance the communication between the two π systems. Meanwhile, the low energy frontier orbitals of the junction can move close to the Fermi level and encounter in energy at certain biases, thus a transport channel with a considerable transmission can be formed near the Fermi level only at a narrow bias regime, resulting in the improvement of rectifying and the robust NDR behavior. This finding could be useful for the design of single molecular devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

First principles study of Fe in diamond: A diamond-based half metallic dilute magnetic semiconductor

Half-metallic ferromagnetic ordering in semiconductors, essential in the emerging field of spintronics for injection and transport of highly spin polarised currents, has up to now been considered mainly in III–V and II–VI materials. However, low Curie temperatures have limited implementation in room temperature device applications. We report ab initio Density Functional Theory calculations on the properties of Fe in diamond, considering the effects of lattice site, charge state, and Fermi level position. We show that the lattice sites and induced magnetic moments of Fe in diamond depend strongly on the Fermi level position and type of diamond co-doping, with Fe being energetically most favorable at the substitutional site in p-type and intrinsic diamond, while it is most stable at a divacancy site in n-type diamond. Fe induces spin polarized bands in the band gap, with strong hybridization between Fe-3d and C-2s,2p bands. We further consider Fe-Fe spin interactions in diamond and show that substitutional Fe{sup +1} in p-type diamond exhibits a half-metallic character, with a magnetic moment of 1.0 μ{sub B} per Fe atom and a large ferromagnetic stabilization energy of 33 meV, an order of magnitude larger than in other semiconductors, with correspondingly high Curie temperatures. These results, combined with diamond's unique properties, demonstrate that Fe doped p-type diamond is likely to be a highly suitable candidate material for spintronics applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Coulomb Interaction between InAs/GaAs Quantum Dots and Adjacent Impurities

Defects positioned close to a plane of quantum dots (QDs) are shown to be influenced by coulomb interaction effect when the quantum dots are charged by electrons. Signals from deep level transient spectroscopy (DLTS) measurement give rise to a mirror effect in the spectrum depending on movement of the defect energy level in relation to the Fermi-level as a result of the electron traffic at the QDs.

36 MATERIALS SCIENCE↗

Electronic structure and thermoelectric properties of nanostructured EuTi{sub 1-x}Nb{sub x}O{sub 3-{delta}} (x = 0.00; 0.02)

The thermoelectric properties of polycrystalline nanostructured EuTiO{sub 3-{delta}} samples are improved by a substitution of 2% Nb for Ti. The figure of merit (ZT) was measured to reach ZT(EuTi{sub 0.98}Nb{sub 0.02}O{sub 3-{delta}}) Almost-Equal-To 0.4 at T= 1040 K while ZT(EuTiO{sub 3-{delta}}) Almost-Equal-To 0.3 at the same temperature. X-ray photoelectron spectra reveal that the in-gap states at the Fermi level are more pronounced for the Nb-substituted samples, resulting in an improved power factor. The valence band peak below the Fermi level is sharply shaped, therefore fulfilling the condition for a large Seebeck coefficient. The specific porosity of the samples reduces the lattice thermal conductivity with a minor effect on the electron transport.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis Crystal Structure and Magnetism of beta-Fe1.00(2)Se1.00(3) Single Crystals

Understanding iron-based superconductors requires high-quality impurity-free single crystals. So far they have been elusive for {beta}-FeSe and extraction of intrinsic materials properties has been compromised by several magnetic-impurity phases. Here, we report synchrotron-clean {beta}-FeSe superconducting single crystals grown via LiCl/CsCl flux method. Phase purity yields evidence for a defect-induced weak ferromagnetism that coexists with superconductivity below T{sub c}. In contrast to Fe{sub 1+y}Te-based superconductors, our results reveal that the interstitial Fe(2) site is not occupied and that all contribution to density of states at the Fermi level must come from in-plane Fe(1).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic structure evolution in doping of fullerene (C{sub 60}) by molybdenum trioxide

Molybdenum oxide doping of fullerene has been investigated using ultraviolet photoemission spectroscopy (UPS), X-ray photoemission spectroscopy (XPS), and inverse photoemission spectroscopy (IPES). The lowest unoccupied molecular orbital and the highest occupied molecular orbital (HOMO) can be observed directly with IPES and UPS. It is observed that the Fermi level position in fullerene is modified by molybdenum oxide doping, and the HOMO onset is shifted to less than 0.3 eV below the Fermi level. The energy level shift is found to saturate at doping ratio of 18%. Till this stage, the shift depends on the doping concentration in a semi-logarithmic scale, with a slope substantially higher than that of the traditional semiconductor theory. The XPS results indicate that charge transfer continues beyond the energy level shift saturation till the doping ratio reaches 66% as evidenced by the Mo{sup 5+} component. At higher doping concentration, there is more Mo{sup 6+} component, which indicates the saturation of the charge transfer between MoO{sub x} and C{sub 60}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Controlling the growth of epitaxial graphene on metalized diamond (111) surface

The 2-dimensional transformation of the diamond (111) surface to graphene has been demonstrated using ultrathin Fe films that catalytically reduce the reaction temperature needed for the conversion of sp{sup 3} to sp{sup 2} carbon. An epitaxial system is formed, which involves the re-crystallization of carbon at the Fe/vacuum interface and that enables the controlled growth of monolayer and multilayer graphene films. In order to study the initial stages of single and multilayer graphene growth, real time monitoring of the system was preformed within a photoemission and low energy electron microscope. It was found that the initial graphene growth occurred at temperatures as low as 500 °C, whilst increasing the temperature to 560 °C was required to produce multi-layer graphene of high structural quality. Angle resolved photoelectron spectroscopy was used to study the electronic properties of the grown material, where a graphene-like energy momentum dispersion was observed. The Dirac point for the first layer is located at 2.5 eV below the Fermi level, indicating an n-type doping of the graphene due to substrate interactions, while that of the second graphene layer lies close to the Fermi level.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Defects responsible for abnormal n-type conductivity in Ag-excess doped PbTe thermoelectrics

Density functional calculations have been performed to investigate the role of Ag defects in PbTe thermoelectric materials. Ag-defects can be either donor, acceptor, or isovalent neutral defect. When Ag is heavily doped in PbTe, the neutral (Ag-Ag) dimer defect at Pb-site is formed and the environment changes to the Pb-rich/Te-poor condition. Under Pb-rich condition, the ionized Ag-interstitial defect (Ag{sub I}{sup +}) becomes the major donor. The formation energy of Ag{sub I}{sup +} is smaller than other native and Ag-related defects. Also it is found that Ag{sub I}{sup +} is an effective dopant. There is no additional impurity state near the band gap and the conduction band minimum. The charge state of Ag{sub I}{sup +} defect is maintained even when the Fermi level is located above the conduction band minimum. The diffusion constant of Ag{sub I}{sup +} is calculated based on the temperature dependent Fermi level, formation energy, and migration energy. When T > 550 K, the diffusion length of Ag within a few minutes is comparable to the grain size of the polycrystalline PbTe, implying that Ag is dissolved into PbTe and this donor defect is distributed over the whole lattice in Ag-excess doped polycrystalline PbTe. The predicted solubility of Ag{sub I}{sup +} well explains the increased electron carrier concentration and electrical conductivity reported in Ag-excess doped polycrystalline PbTe at T = 450–750 K [Pei et al., Adv. Energy Mater. 1, 291 (2011)]. In addition, we suggest that this abnormal doping behavior is also found for Au-doped PbTe.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Well-ordered monolayers of alkali-doped coronene and picene: Molecular arrangements and electronic structures

Adsorptions of alkali metals (such as K and Li) on monolayers of coronene and picene realize the formation of ordered phases, which serve as well-defined model systems for metal-intercalated aromatic superconductors. Upon alkali-doping of the monolayers of coronene and picene, scanning tunneling microscopy and X-ray absorption spectroscopy revealed the rearrangement of the entire molecular layer. The K-induced reconstruction of both monolayers resulted in the formation of a structure with a herringbone-like arrangement of molecules, suggesting the intercalation of alkali metals between molecular planes. Upon reconstruction, a shift in both the vacuum level and core levels of coronene was observed as a result of a charge transfer from alkali metals to coronene. In addition, a new density of states near the Fermi level was formed in both the doped coronene and the doped picene monolayers. This characteristic electronic feature of the ordered monolayer has been also reported in the multilayer picene films, ensuring that the present monolayer can model the properties of the metal-intercalated aromatic hydrocarbons. It is suggested that the electronic structure near the Fermi level is sensitive to the molecular arrangement, and that both the strict control and determinations of the molecular structure in the doped phase should be important for the determination of the electronic structure of these materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic structure evolution in doping of fullerene (C{sub 60}) by ultra-thin layer molybdenum trioxide

Ultra-thin layer molybdenum oxide doping of fullerene has been investigated using ultraviolet photoemission spectroscopy (UPS) and X-ray photoemission spectroscopy (XPS). The highest occupied molecular orbital (HOMO) can be observed directly with UPS. It is observed that the Fermi level position in fullerene is modified by ultra-thin-layer molybdenum oxide doping, and the HOMO onset is shifted to less than 1.3 eV below the Fermi level. The XPS results indicate that charge transfer was observed from the C{sub 60} to MoO{sub x} and Mo{sup 6+} oxides is the basis as hole dopants.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electrical and photoelectric properties of Si-based metal–insulator–semiconductor structures with Au nanoparticles at the insulator–semiconductor interface

It is shown that the formation of Au nanoparticles at the insulator–silicon interface in structures with a high density of surface states results in a shift of the Fermi-level pinning energy at this interface towards the valence-band ceiling in silicon and in increasing the surface-state density at energies close to the Fermi level. In this case, a band with a peak at 0.85 eV arises on the photosensivity curves of the capacitor photovoltage, which is explained by the photoemission of electrons from the formed Au-nanoparticle electron states near the valence-band ceiling in silicon.

36 MATERIALS SCIENCE↗