Search NASA⌕ Search

SEARCH · Search NASA

Results for “GAS DISSOCIATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

Observations of the Minor Species Al, Fe and Ca(+) in Mercury's Exosphere

We report the first detections of Al and Fe, and strict upper limits for Ca(+) in the exosphere of Mercury, using the HIRES spectrometer at the Keck I telescope. We report observed 4-sigma tangent columns of 1.5x10(exp 7) Al atoms per square centimeter at an altitude of 1220 km (1.5 Mercury radii (R(sub M)) from planet center), and that for Fe of 1.6 x 10 per square centimeter at an altitude of 950 km (1.4 R(sub M)). The observed 3-sigma Ca(+) column was 3.9x10(exp 6) ions per square centimeter at an altitude of 1630 km (1.67 R(sub M). A simple model for zenith column abundances of the neutral species were 9.5 x 10(exp 7) Al per square centimeter, and 3.0 x 10(exp 8) Fe per square centimeter. The observations appear to be consistent with production of these species by impact vaporization with a large fraction of the ejecta in molecular form. The scale height of the Al gas is consistent with a kinetic temperature of 3000 - 9000 K while that of Fe is 10500 K. The apparent high temperature of the Fe gas would suggest that it may be produced by dissociation of molecules. A large traction of both Al and Fe appear to condense in a vapor cloud at low altitudes.

Bida, Thomas A.↗
NASA NTRS2012

Will Organic Synthesis Within Icy Grains or on Dust Surfaces in the Primitive Solar Nebula Completely Erase the Effects of Photochemical Self Shielding?

There are at least 3 separate photochemical self-shielding models with different degrees of commonality. All of these models rely on the selective absorption of (12))C(16)O dissociative photons as the radiation source penetrates through the gas allowing the production of reactive O-17 and O-18 atoms within a specific volume. Each model also assumes that the undissociated C(16)O is stable and does not participate in the chemistry of nebular dust grains. In what follows we will argue that this last, very important assumption is simply not true despite the very high energy of the CO molecular bond.

Nuth, Joseph A., III↗
NASA NTRS2015

Pathways for Energization of Ca in Mercury's Exosphere

We investigate the possible pathways to produce the extreme energy observed in the calcium exosphere of Mercury. Any mechanism must explain the facts that Ca in Mercury's exosphere is extremely hot, that it is seen almost exclusively on the dawnside of the planet, and that its content varies seasonally, not sporadically. Simple diatomic molecules or their clusters are considered, focusing on calcium oxides while acknowledging that Ca sulfides may also be the precursor molecules. We first discuss impact vaporization to justify the assumption that CaO and Ca-oxide clusters are expected from impacts on Mercury. Then we discuss processes by which the atomic Ca is energized to a 70,000 K gas. The processes considered are (1) electron-impact dissociation of CaO molecules, (2) spontaneous dissociation of Ca-bearing molecules following impact vaporization, (3) shock-induced dissociative ionization, (4) photodissociation and (5) sputtering. We conclude that electron-impact dissociation cannot produce the required abundance of Ca, and sputtering cannot reproduce the observed spatial and temporal variation that is measured. Spontaneous dissociation is unlikely to result in the high energy that is seen. Of the two remaining processes, shock induced dissociative ionization produces the required energy and comes close to producing the required abundance, but rates are highly dependent on the incoming velocity distribution of the impactors. Photodissociation probably can produce the required abundance of Ca, but simulations show that photodissociation cannot reproduce the observed spatial distribution.

Sulfides↗
NASA NTRS2016

Observations of the Minor Species Al and Fe in Mercury's Exosphere

We report here on the first observational evidence of Al and Fe in the exosphere of Mercury, based on measurements of resolved emission lines of these metals with Keck-1/HIRES. Al emission was observed on two separate runs, in 2008 and 2013, with tangent column densities of 3.1 +/- 1.0 and 4.0 +/-1.5 x 10(exp 7) Al atoms cm(exp - 2) at altitudes of 1185 and 1870 km (1.5 and 1.75 R(sub M). The Al radiative intensity was seen to increase where the slit crossed the planetary penumbral shadow, and then decrease monotonically with altitude. Fe emission has been observed once, in 2009, indicating an extended source. We also present observed 3- Sigma Ca(+) upper limits near Mercury's equatorial anti-solar limb, from which an abundance limit of 4.0 x 10(exp 6) cm(exp -2) at 1650 km altitude is derived for the Ca ion. A simple model for zenith column abundances of the neutral species yields 1.9 -5.2 x 10(exp 7) Al cm(exp -2) , and 8.2 x 10(exp 8) Fe cm(exp -2) . The observations appear to be consistent with production of these species by impact vaporization, with a large fraction of the Al ejecta in molecular form, and that for Fe in mixed atomic and molecular forms. The scale height of the Al gas is consistent with a kinetic temperature of 6100-8000 K. The apparent high temperature and low density of the Al gas would suggest that it may be produced by dissociation of molecules.

Mercury↗
NASA NTRS1990

Lyman alpha radiation in external galaxies

The Ly alpha line of atomic hydrogen is often a luminous component of the radiation emitted by distant galaxies. Except for those galaxies which have a substantial central source of non-stellar ionizing radiation, most of the Ly alpha radiation emitted by galaxies is generated within regions of the interstellar medium which are photoionized by starlight. Conversely, much of the energy radiated by photoionized regions is carried by the Ly alpha line. Only hot, massive stars are capable of ionizing hydrogen in the interstellar medium which surrounds them, and because such stars are necessarily short-lived, Ly alpha emission traces regions of active star formation. Researchers argue that the strength of the Ly alpha emission observed from external galaxies may be used to estimate quantitatively the dust content of the emitting region, while the Ly alpha line profile is sensitive to the presence of shock waves. Interstellar dust particles and shock waves are intimately associated with the process of star formation in two senses. First, both dust particles and shock waves owe their existence to stellar activity; second, they may both serve as agents which facilitate the formation of stars, shocks by triggering gravitational instabilities in the interstellar gas that they compress, and dust by shielding star-forming molecular clouds from the ionizing and dissociative effects of external UV radiation. By using Ly alpha observations as a probe of the dust content in diffuse gas at high redshift, we might hope to learn about the earliest epochs of star formation.

Neufeld, David A.↗
NASA NTRS1988

Electron energy deposition in N2 gas

The processes by which energetic electrons lose energy in a weakly ionized gas of molecular nitrogen are analyzed and calculations are carried out taking into account the discrete nature of the excitation processes. The excitation, ionization, dissociation and heating efficiencies are computed for energies up to 200 eV absorbed in a gas with fractional ionizations varying from 10(-6) to 10(-2). Individual vibrational excitations up to the seventh vibrational level are presented.

Fox, J. L.↗
DOE OSTI2024

Ultraviolet H 2 luminescence in molecular clouds induced by cosmic rays

Context. Galactic cosmic rays (CRs) play a crucial role in ionisation, dissociation, and excitation processes within dense cloud regions where UV radiation is absorbed by dust grains and gas species. CRs regulate the abundance of ions and radicals, leading to the formation of more and more complex molecular species, and determine the charge distribution on dust grains. A quantitative analysis of these effects is essential for understanding the dynamical and chemical evolution of star-forming regions. Aims. The CR-induced photon flux has a significant impact on the evolution of the dense molecular medium in its gas and dust components. This study evaluates the flux of UV photons generated by CRs to calculate the photon-induced dissociation and ionisation rates of a vast number of atomic and molecular species, as well as the integrated UV photon flux. Methods. To achieve these goals, we took advantage of recent developments in the determination of the spectra of secondary electrons, in the calculation of state-resolved excitation cross sections of H 2 by electron impact, and of photodissociation and photoionisation cross sections. Results. We calculated the H 2 level population of each rovibrational level of the X, B, C, B′, D, B″, D′, and a states. We then computed the UV photon spectrum of H 2 in its line and continuum components between 72 and 700 nm, with unprecedented accuracy, as a function of the CR spectrum incident on a molecular cloud, the H 2 column density, the isomeric H 2 composition, and the dust properties. The resulting photodissociation and photoionisation rates are, on average, lower than previous determinations by a factor of about 2, with deviations of up to a factor of 5 for the photodissociation of species such as AlH, C 2 H 2 , C 2 H 3 , C 3 H 3 , LiH, N 2 , NaCl, NaH, O 2 + , S2, SiH, l-C 4 , and l-C 5 H. A special focus is given to the photoionisation rates of H 2 , HF, and N 2 , as well as to the photodissociation of H 2 , which we find to be orders of magnitude higher than previous estimates. We give parameterisations for both the photorates and the integrated UV photon flux as a function of the CR ionisation rate, which implicitly depends on the H 2 column density, as well as the dust properties.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Ultraviolet H 2 luminescence in molecular clouds induced by cosmic rays

Context. Galactic cosmic rays (CRs) play a crucial role in ionisation, dissociation, and excitation processes within dense cloud regions where UV radiation is absorbed by dust grains and gas species. CRs regulate the abundance of ions and radicals, leading to the formation of more and more complex molecular species, and determine the charge distribution on dust grains. A quantitative analysis of these effects is essential for understanding the dynamical and chemical evolution of star-forming regions. Aims. The CR-induced photon flux has a significant impact on the evolution of the dense molecular medium in its gas and dust components. This study evaluates the flux of UV photons generated by CRs to calculate the photon-induced dissociation and ionisation rates of a vast number of atomic and molecular species, as well as the integrated UV photon flux. Methods. To achieve these goals, we took advantage of recent developments in the determination of the spectra of secondary electrons, in the calculation of state-resolved excitation cross sections of H 2 by electron impact, and of photodissociation and photoionisation cross sections. Results. We calculated the H 2 level population of each rovibrational level of the X, B, C, B', D, B", D', and a states. We then computed the UV photon spectrum of H 2 in its line and continuum components between 72 and 700 nm, with unprecedented accuracy, as a function of the CR spectrum incident on a molecular cloud, the H 2 column density, the isomeric H 2 composition, and the dust properties. The resulting photodissociation and photoionisation rates are, on average, lower than previous determinations by a factor of about 2, with deviations of up to a factor of 5 for the photodissociation of species such as AlH, C 2 H 2 , C 2 H 3 , C 3 H 3 , LiH, N 2 , NaCl, NaH, O$^+_2$, S 2 , SiH, l-C 4 , and l-C 5 H. A special focus is given to the photoionisation rates of H 2 , HF, and N 2 , as well as to the photodissociation of H 2 , which we find to be orders of magnitude higher than previous estimates. We give parameterisations for both the photorates and the integrated UV photon flux as a function of the CR ionisation rate, which implicitly depends on the H 2 column density, as well as the dust properties.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1980

Molecule formation and infrared emission in fast interstellar shocks. II - Dissociation speeds for interstellar shock waves

The postshock destruction of molecules is examined, including the processes of (1) collisions with neutral hydrogen atoms and molecules, (2) electronic collisions, and (3) neutral chemical reactions with atoms, particularly atomic hydrogen. By using conservative estimates of collisional dissociation rates from individual vibrational states, it is found that process (1) leads to the destruction of molecular hydrogen behind shocks with speeds equal to or greater than 25 km/s if the preshock molecular gas has hydrogen nucleus densities of equal to or greater than 10 to the 4th/cu cm. At lower densities (100 per cu cm), destruction occurs for shock speeds equal to or greater than 50 km/s and process (2) dominates. Dissociation of molecules such as CO, H2O, and O2 follows the destruction of H2, as the resultant hydrogen atoms chemically dissociate the metal atoms from their bonds (process 3) in the hot postshock gas. These results demonstrate that many of the observed high-speed interstellar molecules, if shock accelerated, must have dissociated and reformed in the postshock gas.

Hollenbach, D.↗
DOE OSTI2022

Transient vibration and product formation of photoexcited CS 2 measured by time-resolved x-ray scattering

Here, we have observed details of the internal motion and dissociation channels in photoexcited carbon disulfide (CS 2 ) using time-resolved x-ray scattering (TRXS). Photoexcitation of gas-phase CS 2 with a 200 nm laser pulse launches oscillatory bending and stretching motion, leading to dissociation of atomic sulfur in under a picosecond. During the first 300 fs following excitation, we observe significant changes in the vibrational frequency as well as some dissociation of the C–S bond, leading to atomic sulfur in the both 1 D and 3 P states. Beyond 1400 fs, the dissociation is consistent with primarily 3 P atomic sulfur dissociation. This channel-resolved measurement of the dissociation time is based on our analysis of the time-windowed dissociation radial velocity distribution, which is measured using the temporal Fourier transform of the TRXS data aided by a Hough transform that extracts the slopes of linear features in an image. The relative strength of the two dissociation channels reflects both their branching ratio and differences in the spread of their dissociation times. Measuring the time-resolved dissociation radial velocity distribution aids the resolution of discrepancies between models for dissociation proposed by prior photoelectron spectroscopy work.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Separation of CO 2 from Flue Gas and Potential for Geologic Sequestration

The objectives of this study were to review various methods reported in the literature for the separation and geologic sequestration of carbon dioxide and evaluate the potential of TVA fossil fuel-burning plant locations for onsite geologic sequestration of CO 2 from stack emissions. Several conventional and nonconventional technologies for the separation of CO 2 from flue gas, including absorption, adsorption, cryogenic distillation, membranes, hydrate formation and dissociation, and ammonia carbonation, have been reviewed in terms of separation mechanisms, flow diagrams, and costs. Most of the technologies that have been reviewed are still at the research and development stage. Critical information needed to assess and compare these technologies is still lacking. In addition, information on some of the technologies that have been tested at a pilot or industrial scale has not been fully disclosed in the open literature. Because of this lack of data, it is difficult to make a critical assessment of each of the separation technologies. Based on limited information, it was concluded that the most promising methods are membrane separation and the Mitsubishi process for chemical absorption. Both processes involve separating CO 2 at high temperature, minimizing the cost for cooling prior to separation. Physical and chemical geologic formations of CO 2 were also reviewed. It was concluded that due to the geologic time scale of CO 2 sequestration periods, relatively safe conditions, general proximity to CO 2 sources, and extensive knowledge of underground conditions, sequestration of CO 2 in underground aquifers and coal beds is a very promising method of mitigating greenhouse gas emissions. The cost is predicted to be relatively low and the suitable sites are numerous for this application, with many of these sites located close to the plants.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2023

Automated identification and calculation of prompt effects in kinetic mechanisms using statistical models

The kinetics of prompt dissociation involves rovibrationally excited species (generally formed by exothermic reactions) which may dissociate or isomerize prior to thermalization via collisions with the bath gas. Treating such rovibrationally excited species (so-called "hot" species) with standard kinetic phenomenology may result in incorrect macroscopic representation of their reactivity. Here this work presents the first fully automated methodology for the calculation of prompt effects of a chosen species in a kinetic mechanism, including (i) reaction selection; (ii) theoretical calculation of rate constants and prompt branching fractions; and (iii) final rate constant fitting. The energy partition between hot fragments is estimated using a variety of statistical models, including a new physically sound microcanonical statistical model based on the rovibrational density of states of the fragments. The methodology is validated against literature data for the prompt dissociations of HCO and C 3 H 7 radicals. The microcanonical statistical model is in better agreement with trajectory simulations for larger species and is thus applicable for practical systems that typically involve large molecules, for which direct dynamics calculations are impractical. The automated workflow is applied to the evaluation of the effects of prompt dissociation for two isomeric radicals C 4 H 7 1-3 (1-methylallyl) and C 4 H 7 1-4 (3-buten-1-yl). Twelve H-atom abstraction reactions are selected and the corresponding rate constants are computed with first principles theory. The microcanonical statistical model predicts that prompt dissociations of C 4 H 7 1-3 and C 4 H 7 1-4 are already significant at 1000K, resulting in differences of up to an order of magnitude at 2000K with respect to the phenomenological thermal rate constants. To illustrate the effects of prompt dissociation on simulations of experimental data, the calculated prompt rate constants are implemented in both CRECK and C3MechV3.3 kinetic mechanisms. Simulations of experimental flame data illustrate the noticeable impact of prompt dissociation kinetics on the high-temperature combustion reactivity of C 4 H 8 -1 and C 4 H 8 -2.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1992

History of oxygen and carbon escape from the Martian atmosphere

A fraction of the oxygen in the Martian atmosphere continually escapes to space because dissociative recombination of the O2(+) ions in the ionosphere can impart sufficient energy to the product O atoms. In addition, ionization of the extended atomic oxygen corona resulting from the above process adds to escape since the solar wind can carry away O(+) ions born above a few hundred km altitude. A further by-product of this ion-pickup by the solar wind is an additional population of escaping oxygen atoms that are sputtered from the atmosphere near the exobase by pickup ions that are on reentry rather than escaping trajectories. This sputtering process can also remove carbon in the form of intact or dissociated CO2 since all atoms and molecules in the 'target' gas are subject to the collisional energy transfer that characterizes sputtering. We have estimated the present rates of escape of oxygen and carbon due to these mechanisms, as well as the rates at several epochs in the history of the solar system.

Luhmann, J. G.↗
NASA NTRS1993

Centrifugally driven winds from protostellar disks. I - Wind model and thermal structure

The thermal structure of a wind that is centrifugally driven from the surface of a protostellar disk is studied. A generalized version of the Blandford and Payne self-similar wind model is introduced, and the temperature and ionization distributions in the outflow are investigated. For the evolution of atomic winds, the heat equation and the rate equations that describe the ionization and excitation state of hydrogen are solved self-consistently. Ambipolar diffusion is found to be a robust mechanism for heating the gas. In the more powerful outflows, molecular hydrogen is collisionally dissociated close to the disk surface, and hydrogen is mainly atomic within a few astronomical units from the central source. It is also demonstrated that these outflows have enough momentum to lift dust grains from the disk surface.

Safier, Pedro N.↗
NASA NTRS1965

Research Facilities Summary: Wind Tunnels: Subsonic, Transonic and Supersonic - Volume 2

This volume describes subsonic, transonic, and supersonic facilities called wind tunnels in the classical sense; that is, facilities which provide essentially continuous steady streams of gas which are cool enough so there is no significant dissociation, and in which test models are generally stationary translationally. Ames facilities for gasdynamic tests in which model translation provides a significant portion of the test speed are described in Volume I, "Guns and Ranges." For quick reference, this volume includes a tabular summary of Ames subsonic, transonic, and supersonic wind tunnels. The table is followed by more detailed descriptions. Tabulated information on most major wind tunnels in the United States can be found in Reference 1.

Source record↗
NASA NTRS1990

Star formation and the distribution of HI and infrared emission in M51

H I, infrared, CO, H alpha and beta band observations of M51, the prototypical grand-design spiral galaxy, are used to study the consequences of star formation for the distribution of H I and dust. Using the H I and CO data sets new tests of the idea that the H I is largely a dissociation product in star-forming regions were performed. It was confirmed that the H I spiral arms are generally coincident with the H II region arms, and offset downstream from the CO arms. The radial distributions of total gas, H alpha and H I surface density have a simple explanation in the dissociation picture. The distributions also demonstrate how the surface density of H I might be related to the star formation efficiency in molecule-rich galaxies. The large width of the H I regions along the arms compared to that of the H II regions can be understood in terms of a simple Stroemgren sphere calculation. The longer lifetime of the stars producing dissociating radiation vs. those producing ionizing radiation will also contribute to the greater width of the H I arms if stars are continuously forming on the arms. The lack of detailed coincidence of the H I and H II regions along the inner arms has a variety of possible explanations within the dissociation scenario. Two simple tests to probe the origin of the IRAS emission in M51 were performed.

Rand, Richard J.↗
NASA NTRS1992

Star formation and the distribution of HI and infrared emission in M51

H I, infrared, CO, H alpha and beta band observations of M51, the prototypical grand-design spiral galaxy, are used to study the consequences of star formation for the distribution of H I and dust. Using the H I and CO data sets new tests of the idea that the H I is largely dissociation product in star-forming regions were performed. It was confirmed that the H I spiral arms are generally coincident with the H I region arms, and offset downstream from the CO arms. The radial distributions of total gas, H alpha and H I surface density have a simple explanation in the dissociation picture. The distributions also demonstrate how the surface density of H I might be related to the star formation efficiency in molecule-rich galaxies. The large width of the regions along the arms compared to that of the H II regions can be understood in terms of a simple Stroemgren sphere calculation. The long lifetime of the stars producing dissociating radiation vs. those producing ionizing radiation will also contribute to the greater width of the H I arms if stars are continuously forming on the arms. The lack of detailed coincidence of the H I and H II regions along the inner arms has a variety of possible explanations within the dissociation scenario. Two simple tests to probe the origin of the IRAS emission in M51 were performed.

Rand, Richard J.↗
DOE OSTI2026

Consolidation and Permeability of the B1 and D1 Gas Hydrate Bearing Sands and Associated Seal Sediments of the Extended-Duration Gas Production Test Site on the Alaska North Slope

Gas hydrate, a solid combination of gas (mostly methane in nature) and water molecules stable at low temperatures and elevated pressures, occurs naturally in marine and permafrost-associated environments. Gas hydrate reservoirs, such as those in the Alaska North Slope, have been considered potential energy resources for gas production. To understand the petrophysical and geo-mechanical characteristics of the reservoir, core samples retrieved from the site of the JOGMEC-DOE-USGS collaborative gas hydrate R&D project have been analyzed in the laboratory for their hydraulic and mechanical properties. This paper focuses on both seal and reservoir samples associated with the B1 and D1 sands, which are evaluated for index properties (including porosity, grain size distribution, liquid and plastic limits, specific surface area, and specific gravity), consolidation, permeability, and water retention. Furthermore, the reservoir core samples were tested with pore-filling, laboratory-grown tetrahydrofuran hydrate, in order to assess reservoir behavior during gas production from hydrates. Under simulated in situ stress conditions, the seal and hydrate-free reservoir cores had a permeability anisotropy ratio of k h /k v = 3.0−5.0, and k h /k v = 2.4−3.0 for the reservoir tetrahydrofuran hydrate-bearing cores. The data suggest that depressurizing the reservoir to induce hydrate dissociation alters the reservoir effective permeability in three ways: permeabilities decrease due to porosity lost (e.g., the initial reservoir thickness can decrease by up to 5% upon 7 MPa depressurization), permeability increases due to the loss of solid hydrate in the pore space, and permeability anisotropy k h /k v decreases in response to the evolving pore-space geometry. We show that given the simulated in situ gas hydrate saturations (i.e., S h = 32% in core 7P-2E and S h = 21% in core 20P-4), gas production from the dissociation of tetrahydrofuran hydrate in the two tested cores results in a net increase in effective permeability and a decrease in k h /k v . This study highlights the importance of investigating seal and reservoir sediments and the impacts of depressurization on the porosity and permeability responses during production.

Geological materials↗