Search NASA⌕ Search

SEARCH · Search NASA

Results for “HELIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Superfluid and normal fluid helium II in a rotating tank under low and microgravity environments

The physical behavior of superfluid and normal fluid helium II is discussed. It is shown that the centrifugal force due to a rotating container can never separate the superfluid from the normal fluid helium in a large rotating cylindrical spacecraft. A classical approach is appropriate for treating superfluid and normal fluid cryogenic helium as a mixture without separation in a large rotating cylinder in a spacecraft propellant systems.

Hung, R. J.↗

Superfluid Helium On-Orbit Transfer (SHOOT) operations

The in-flight tests and the operational sequences of the Superfluid Helium On-Orbit Transfer (SHOOT) experiment are outlined. These tests include the transfer of superfluid helium at a variety of rates, the transfer into cold and warm receivers, the operation of an extravehicular activity coupling, and tests of a liquid acquisition device. A variety of different types of instrumentation will be required for these tests. These include pressure sensors and liquid flow meters that must operate in liquid helium, accurate thermometry, two types of quantity gauges, and liquid-vapor sensors.

Kittel, P.↗

Fluid acquisition system for superfluid helium

To enable the resupply of liquid helium users on orbit, the technology for helium transfer in space is being developed. A key element of the resupply process is the fluid acquisition in the supply dewar; feeding the liquid to the pump. For the Superfluid Helium On-Orbit Transfer (SHOOT) flight experiment a number of fluid acquisition techniques have been examined. Subscale tests performed in one gravity on two of the candidates are described. The hope is that these results may be scaled to much larger systems in low gravity. These two types are a screened channel device and a capillary device. Flow rates versus negative head height are presented. Difficulties with each device and the test environment are explained. Some of the measurements to be made on orbit on the fluid acquisition for SHOOT are described.

Dipirro, M. J.↗

Measurement of cosmic-ray proton and helium spectra during the 1987 solar minimum

The differential cosmic-ray proton and helium spectra have been measured during the 1987 solar minimum using a balloon-borne superconducting magnetic spectrometer launched from Prince Albert, Canada. The changing geomagnetic cutoff along the balloon trajectory was observed in the low-energy proton data to be about 25 percent below the nominal calculated values. The absolute particle fluxes were approximately equal to the highest fluxes observed at the previous solar minimum in 1977. Above 10 GV the observed spectra are represented by a power law in rigidity with spectral indices of 2.74 + or - 0.02 for protons and 2.68 + or - 0.03 for helium. The measurements above 200 MeV per nucleon are consistent with rigidity power-law interstellar spectra modulated with the solar modulation parameter phi = 500 MV. The energy dependence of the proton-to-helium ratio is consistent with rigidity power-law injection spectra and rigidity-dependent propagation without reacceleration.

Seo, E. S.↗

Performance of all-metal demountable cryogenic seals at superfluid helium temperatures

Two all-metal demountable cryogenic seals with an outside diameter of 36.6 mm, inside diameter of 27.2 mm and thickness of 0.51 mm were leak-tested at room temperature (300 K), liquid nitrogen temperature (21 cycles at 77 K), liquid helium temperature (nine cycles at 4.2K) and superfluid helium temperature (four cycles at 1.6 K). Each seal was mounted and demounted for 13 cycles. Thickness measurements at 90 deg intervals along the circumference showed a maximum seal compression of 0.038 mm. Leak rate measurements at all temperatures showed no detectable leak above the helium background level, typically 0.1 x 10 exp -9 std cu cm/s, during testing.

Salerno, L. J.↗

Electron-impact excitation of the n 1P levels of helium - Theory and experiment

New experimental electron-energy-loss data have been used to extract differential and integral cross sections for excitation of the 2 1P level, and for the overlapping (3 1P, 3 1D, 3 3D) levels of helium, at 30-, 50-, and 100-eV incident electron energies. First-order many-body theory (FOMBT) has been used to calculate the differential and integral cross sections for excitation of the n 1P (n = 2,...,6) levels of helium by electron impact, for incident electron energies from threshold to 500 eV. Detailed comparisons between these two new sets of data are made as well as comparisons with appropriate published experimental and theoretical results. A simple scaling relationship is derived from the FOMBT results for n = 2,...,6 that provides differential and integral cross sections for all symmetry final levels of helium with n = 6 or greater.

Cartwright, David C.↗

Analysis of the Cosmic Background Explorer (COBE) helium venting through effects on the orbit

An analysis is described which shows that a helium venting thrust level that is 60 percent higher than the predicted 2.3 millinewtons may be the cause of the unusually high premission-analysis and on-orbit support orbital decay rates and drag correction factors found for the Cosmic Background Explorer satellite. Depletion of the helium allowed a determination of the average mass flow rate and specific impulse. The average mass flow rate of 3.3 mg/sec confirmed the thrust levels indicated by the venting thrust analysis. Liquid helium is used for cooling instruments aboard the satellite.

Cox, C. M.↗

Ages of globular clusters and helium diffusion

Evolutionary tracks have been calculated with alpha-enhanced compositions which cover the entire globular cluster metallicity range and have constructed isochrones which include the effects of microscopic diffusion of helium. The turnoff magnitudes from the isochrones were combined with the theoretical RR Lyrae magnitudes from Lee to determine the ages of 32 Galactic globular clusters using the magnitude difference between the turnoff and horizontal branch. It is found that including the effects of helium diffusion has a negligible effect on the derived ages of globular clusters. Regardless of the inclusion of helium diffusion, a significant age spread of 5 Gyr among the globular clusters is found. The oldest globular clusters studied here are 17 +/- 2 Gyr old.

Chaboyer, Brian↗

Welding of the superfluid helium on-orbit transfer (SHOOT) Flight Demonstration tanks and hardware

The SHOOT Flight Demonstration will provide the technology necessary to resupply superfluid helium in space. The helium dewars in SHOOT have unique requirements, including no detectable leaks, demonstrated structural integrity to allow flight aboard the Space Shuttle, and low parasitic heat leak. The requirements, materials, and processes used to fabricate the two superfluid helium dewars, particularly as they apply to welding, are presented.

Mcclure, Sidney↗

Measurement of C-12, O-16, and Fe-56 charge changing cross sections in helium at high energy, comparison with cross sections in hydrogen, and application to cosmic-ray propagation

We present measurements of the spallation cross sections of carbon, oxygen, and iron in helium and hydrogen, at beam energies from 540 to 1600 MeV/nucleon, performed by exposing liquid helium, CH2, and C targets. Charge changing cross sections are reported for fragments down to Ne for Fe + alpha and Fe + p reactions, and down to B for O + alpha, O + p, C + alpha, and C + p reactions. Alpha- to p-induced cross section ratios (sigma(sub alpha)/sigma(sub p)) are determined at the same energy per nucleon. From these measurements an empirical formula for the (sigma(sub alpha)/sigma(sub p)) ratios is derived and is found in good agreement with available isotopic cross sections data from radioactivity and radiochemical techniques. These results are applied to the propagation of heavy charged cosmic rays in an interstellar medium with a helium to hydrogen abundance ratio of 0.10. It is shown that the Sc-Mn/Fe ratio prediction is decreased relative to the B/C ratio when compared to propagation calculations in a pure hydrogen interstellar medium.

Ferrando, P.↗

Limits to the primordial helium abundance in the baryon-inhomogeneous big bang

The parameter space for baryon inhomogeneous big bang models is explored with the goal of determining the minimum helium abundance obtainable in such models while still satisfying the other light-element constraints. We find that the constraint of (D + He-3)/H less than 10 exp -4 restricts the primordial helium mass fraction from baryon-inhomogeneous big bang models to be greater than 0.231 even for a scenario which optimizes the effects of the inhomogeneities and destroys the excess lithium production. Thus, this modification to the standard big bang as well as the standard homogeneous big bang model itself would be falsifiable by observation if the primordial He-4 abundance were observed to be less than 0.231. Furthermore, a present upper limit to the observed helium mass fraction of Y(obs)(p) less than 0.24 implies that the maximum baryon-to-photon ratio allowable in the inhomogeneous models corresponds to eta less than 2.3 x 10 exp -9 (omega(b) h-squared less than 0.088) even if all conditions are optimized.

Mathews, G. J.↗

Some effects of argon and helium upon explosions of carbon monoxide and oxygen

Report presents the results of an investigation conducted to study the effects of the inert gases, argon and helium, upon flame speed and expansion ratio in exploding mixtures of carbon monoxide, oxygen and water.For the particular gas mixtures investigated the results show that: (1) With the possible exception of helium in small amounts the addition of inert gas always produces decreased flame speed and expansion ratio; (2) like volumes of argon and helium have very different effects upon flame speed but practically the same effect upon expansion ratio; and (3) the difference in the effect of these two gases upon speed is independent of the ratio of carbon monoxide to oxygen. A discussion of some possible modes by which inert gases may produce the observed effects is included.

Fiock, Ernst F↗

Superfluid Helium On-Orbit Transfer (SHOOT) flight demonstration

The Superfluid Helium On-Orbit Transfer (SHOOT) Flight Demonstration was an attached Shuttle payload mounted on a Hitchhiker cross-bay carrier which flew on STS-57 in June of 1993. SHOOT successfully demonstrated the handling and transfer of superfluid helium between two containers, called dewars, in low gravity. SHOOT was a class C payload and for the STS-57 mission was termed a complex secondary payload. The primaries were the retrieval of the EURECA carrier and a collection of modular experiments contained in SPACEHAB. Because the liquid helium was continuously boiling off, SHOOT's activities were scheduled for the first three days of the mission, concurrent with some SPACEHAB experiments, but well before the EURECA retrieval. Control of the SHOOT experiment was highly interactive and originated primarily from the Goddard Payload Operations and Control Center (POCC). Transfer and calibration activities required continuous command windows of up to 50 minutes duration and up to 80 minutes out of each orbit. Occasionally the crew controlled the experiment using the Payload General Support Computer (PGSC) when near-real time control and monitoring was required. SHOOT also placed considerable demands on the orbiter, including a pitch rotation of 3 deg./sec for 15 minutes, and translational burns using both the aft and forward RCS jets to generate accelerations up to 7 milli-g. The basis for these and other requirements are discussed. Interacion with the crew and timing of crew activity during the mission will be detailed. The processing flow of SHOOT at KSC is described with emphasis on the tradeoffs for vertical, as opposed to horizontal, installation in the orbiter. Finally, some lessons learned are presented that are relevant to future cryogenic and Hitchhiker payloads.

Shirron, Peter↗

Proton and helium cyclotron anisotropy instability thresholds in the magnetosheath

Both the protons and the helium ions of the terrestrial magnetosheath typically display T (sub perpendicular) greater than T (sub parallel), where perpendicular to and parallel to denote directions perpendicular and parallel to the background magnetic field. Observations of the highly compressed magnetosheath show an inverse correlation between these ion temperature anisotropies and the parallel proton beta. Computer simulations have demonstrated that these correlations are due to wave-particle scattering by electromagnetic ion cyclotron anisotropy instabilities. These correlations correspond to linear theory thresholds of the proton cyclotron and the helium cyclotron instabilities. This paper uses linear Vlasov theory and the assumption of a constant maximum growth rate to obtain closed-form expressions for these thresholds as a function of the relative helium density and the parallel proton beta in a parameter model of the magnetosheath.

Gary, S. Peter↗

First measurement of helium on Mars: Implications for the problem of radiogenic gases on the terrestrial planets

108 +/- 11 photons of the martian He 584-A airglow detected by the Extreme Ultraviolet Explorer (EUVE) satellite during a 2-day exposure (January 22-23, 1993) correspond to the effective disk average intensity of 43 +/- 10 Rayleigh (Ra). Radiative transfer calculations, using a model atmosphere appropriate to the conditions of the observation and having an exospheric temperature of 210 +/- 20 K, result in a He mixing ratio of 1.1 +/- 0.4 ppm in the lower atmosphere. Nonthermal escape of helium is due to electron impact ionization and pickup of He(+) by the solar wind, to collisions with hot oxygen atoms, and to charge exchange with molecular species with corresponding column loss rates of 1.4 x 10(exp 5), 3 x 10(exp 4), and 7 x 10(exp 3)/sq cm/s, respectively. The lifetime of helium on Mars is 5 x 10(exp 4) years. the He outgassing rate, coupled with the Ar-40 atmospheric abundance and with the K:U:Th ratio measured in the surface rocks, is used as input to a single two-reservoir degassing model which is applied to Mars and then to Venus. A similar model with known abundances if K, U, and Th is applied to Earth. The models for Earth and Mars presume loss of all argon accumulated in the atmospheres during the first billion years by large-scale meteorite and planetesimal impacts. The models show that the degassing coefficients for all three planets may be approximated by function delta = delta(sub 0) x (t(sub 0)/t)(exp 1/2) with delta(sub 0) = 0.1, 0.04, and 0.0125 Byr for Earth, Venus, and Mars, respectively. After a R(exp 2) correction this means that outgassing processes on Venus and Mars are weaker than on Earth by factors of 3 and 30, respectively. Mass ratios of U and Th are almost the same for all three planets, while potassiumis depleted by a factor of 2 in Venus and Mars. Mass ratio of helium and argon are close to 5 x 10(exp -9) and 2 x 10(exp -8) g/g in the interiors of all three planets. The implications of these results are discussed.

Krasnopolsky, V. A.↗

Helium-Recycling Plant

Proposed system recovers and stores helium gas for reuse. Maintains helium at 99.99-percent purity, preventing water vapor from atmosphere or lubricating oil from pumps from contaminating gas. System takes in gas at nearly constant low back pressure near atmospheric pressure; introduces little or no back pressure into source of helium. Concept also extended to recycling of other gases.

Cook, Joseph↗

Design of a Superconducting Magnetic Suspension System for a Liquid Helium Flow Experiment

We discuss a preliminary design for a superconducting magnetic suspension system for measurement of drag on rotationally symmetric bodies in liquid helium. Superconducting materials are a natural choice for liquid helium studies, since temperatures are well below most critical temperatures, so that the resulting heat load is negligible. Also, due to its diamagnetic properties, a superconducting model (for example made or coated with Nb) is inherently stable against disturbances. Issues which we consider include model placement during initial cool-down, maintaining placement during anticipated drag and lift forces, and force measurement. This later can be achieved by a passive technique, where the body is allowed to deflect under the influence of drag from its neutral position. The resulting shift in flux is detected via a superconducting pickup coil. The pickup coil may be connected either to a SQUID, or a secondary loop wound around a Hall probe. Both options are discussed. The objective of this work is to gain a better understanding of the nature of turbulent fields in normal and superfluid helium for potential application to problems in classical high Reynolds number turbulence.

Smith, Michael R.↗

Study of Injection of Helium into Supersonic Air Flow Using Rayleigh Scattering

A study of the transverse injection of helium into a Mach 3 crossflow is presented. Filtered Rayleigh scattering is used to measure penetration and helium mole fraction in the mixing region. The method is based on planar molecular Rayleigh scattering using an injection-seeded, frequency-doubled ND:YAG pulsed laser and a cooled CCD camera. The scattered light is filtered with an iodine absorption cell to suppress stray laser light. Preliminary data are presented for helium mole fraction and penetration. Flow visualization images obtained with a shadowgraph and wall static pressure data in the vicinity of the injection are also presented.

Seaholtz, Richard G.↗