SEARCH · Search NASA
Results for “HOPP”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Phase Locking of a Second Harmonic Gyrotron Using a Quasi-Optical Circulator
The benefits of high power millimeter wave radiation for use in communication and radar systems are well known. Recently a frequency near 35 GHz was allotted for use in deep space communications, including bands for spacecraft uplink and downlink. Described is the phase locking of a high power pulsed gyrotron oscillator through the use of a quasi-optical circulator (using a second harmonic gyrotron).
A Hybrid Symmetric FEM/MOM Formulation Applied to Scattering by Inhomogeneous Bodies of Revolution
A new symmetric formulation of the Hybrid Finite Element Method (HFEM) is described which combines elements of the Electric Field Integral Equation (EFIE) and the Magnetic Field Integral Equation (MFIE) for the exterior region along with the finite element solution for the interior problem. The formulation is applied to scattering by inhomogeneous bodies of revolution. To avoid spurious modes in the interior region a combination of vector and nodal based finite elements are used. Integral equations in the exterior region are used to enforce the Sommerfield radiation condition by matching both the tangential electric and magnetic fields between interior and exterior regions.
Development of an Ultra-wide band Receiver for the North America Array
The North America Array (NAA), also known as the next-generation Very Large Array (ngVLA), is a concept for a radio astronomical interferometric array operating in the frequency range 1.2 GHz to 116 GHz and designed to provide substantial improvements in sensitivity, angular resolution, and frequency coverage while reducing operational costs compared to the current Jansky Very Large Array (JVLA). At JPL, we are designing a single receiver package designed to operate across the 8 to 48 GHz frequency range, in contrast to the current JVLA, which covers this frequency range with five receiver packages. Reducing the number of receiving systems required to cover the full frequency range would reduce operating costs. We are developing a prototype integrated feed-receiver package with a system noise temperature that meets the requirements of the ngVLA/NAA primary science programs, with a design that meets the requirement of low long-term operational costs. The receiver package being developed at JPL consists of a feed horn, low-noise amplifier (LNA), and down-converters to analog intermediate frequencies. We report on the status of this receiver package development.
Deep Space Optical Communications
The future demand for enhanced telecommunication capacity required to support human and robotic exploration from deep-space has motivated the advancement of free-space laser communication technologies for the past few decades. Steady advances in these technologies, validated through space-to-ground demonstrations, have resulted in incremental advances with the deep-space optical communications (DSOC) technology demonstration being one of the next milestones on NASA’s roadmap. NASA’s Psyche Mission to launch early next decade plans to host a DSOC flight laser transceiver for link demonstrations extending from 0.1 to farther than 2 astronomical units (AU). The capabilities validated though this demonstration, we expect, could spur the use of optical communications infrastructure around Mars in the next few decades. In this paper we summarize ongoing activities underway at the Jet Propulsion Laboratory in preparation for the DSOC technology demonstration and go on to present discussions on the drivers for developing a robust deep space laser communications operational capability.
Toward a NASA Deep Space Optical Communications System
As discussed at SpaceOps in 2016, we expect the data rates from deep space missions to increase approximately one order of magnitude per decade for the next 50 years. The first order of magnitude improvement will come from existing plans for radio frequency (RF) communications including enhancements to both spacecraft and Deep Space Network (DSN) facilities. The next two orders of magnitude are predicted to come from the introduction of deep space optical communications. Studies indicate that optical receive apertures of between 8m12m are desired. The large cost of dedicated receive telescopes makes this method unrealistic – at least in the near-term. The cost of large optical ground terminals is driven primarily by the cost of the optics and by the cost of a stable structure for the telescope. We propose a novel hybrid design in which existing DSN 34m beam waveguide (BWG) radio antennas can be modified to include an 8m equivalent optical primary. By utilizing a low-cost segmented spherical mirror optical design, pioneered by the optical astronomical community, and by exploiting the already existing extremely stable large radio aperture structures in the DSN, we can minimize both of these cost drivers for implementing large optical communications ground terminals. Two collocated hybrid RF/optical antennas could be arrayed to synthesize the performance of an 11.3m receive aperture to support more capable or more distant space missions or used separately to communicate with two optical spacecraft simultaneously. NASA is in the midst of building six new 34m BWG antennas in the DSN. The final two are planned to be built at the DSN Goldstone, California and Canberra complexes. We are now investigating building these last two antennas as RF/optical hybrids. By delaying their operational dates by two years, we would be able to add the 8m optical receive capability for these two antennas while fitting within existing budgetary constraints. This paper describes the hybrid antenna design, the technical challenges being addressed, and plan for using this concept, together with ongoing work on optical flight terminals, to infuse operation optical communications into deep space missions.
The ISARA Mission – Flight Demonstration of a High Gain Ka-Band Antenna for 100Mbps Telecom
The NASA sponsored ISARA (Integrated Solar Array and Reflectarray Antenna) mission successfully demonstrated a 100 Mbps Ka-band CubeSat communications capability. The enabling technology is a high gain reflectarray antenna integrated into a modified Pumpkin “Turkey Tail” solar array which wraps around the spacecraft body, essentially requiring near zero volume to accommodate. A simple low gain feed is used to distribute RF power to the reflectarray through free space. The 0.5kg ISARA antenna mass is compatible with the requirements of a 3U (10x10x10 cm3) spacecraft. The ISARA mission validated this approach in a flight technology demonstration. A unique on-orbit measurement system provided accurate measurement of the antenna gain from space. This system demonstrated 100Mbps downlink data rate capability using a relatively simple ground station with a 70cm parabolic reflector antenna. The spacecraft also verified ISARA solar panel output power and demonstrated the operational capability to accurately point the antenna to a Ka-band ground station, a key requirement for a telecom system. ISARA achieved a number of technological firsts. It is believed to be the first reflectarray antenna flown in space, first high gain antenna integrated with solar panels, first calibrated reflectarray antenna gain and pattern measurement performed from space and the first 3U CubeSat to demonstrate 100 Mbps using a small, low-cost ground station.
Preliminary Considerations for Microwave Consolidation/Sintering of Lunar Regolith Simulant
As NASA prepares to establish permanent habitats on the Moon, a significant first step is to be able to land multiple times in the same area. As was consistently shown during the Apollo program, the very fine granular structure of the lunar regolith (the Moon’s “soil”)poses significant physical and health challenges [1]. One of the most concerning is the hyper-velocity lunar surface ejecta that results from the engine exhaust that exits the rocket as it lands and takes off [2]. It has been determined that to mitigate this, the regolith must be consolidated.
Microwave Sintering: Initial Scale-Up for Lunar Landing and Launch Pad Construction
Explore the source record for details and available documents.
Preliminary Considerations for Microwave Consolidation/Sintering of Lunar Regolith Simulant
Explore the source record for details and available documents.
Microwave Structure Construction Capability Year One Accomplishments
The Microwave Structure Construction Capability (MSCC) element, part of the Moon to Mars Planetary Autonomous Construction Project (MMPACT) was initiated in 2020. MSCC is responsible for creating horizontal and vertical infrastructure on the moon using microwave energy. Microwave energy was selected since it is the only method to volumetrically heat the regolith. All other sintering/melting methods rely on thermal conduction through the very low conductivity surface, resulting in an inefficient process. Advances were achieved in materials characterization and understanding, microwave sintering in vacuum, and microwave design and analyses. Two dielectric property testing systems have been developed at Radiance Technologies and JPL. These will examine dielectric properties at cryogenic temperatures and over a broad frequency range. Permittivity and permeability testing at -60 ̊C in vacuum from 0.05 to 3 GHz has been generated at JPL. Additional modifications will be made to go to -190 ̊C (LN2). Radiance Technologies created a test system to measure dielectric properties at greater than 10 GHz and initiated work on developing a vacuum capable, portable test system to measure dielectric properties of Apollo regolith and simulants from 100 MHz to 18 GHz. These tests are to identify optimal heating frequencies and protocols. During microwave sintering at about 1100 ̊C, volatiles were creating difficulty in achieving a reasonably dense specimen. Due to processing in vacuum and the nature of the lunar regolith, some volatiles and porosity are expected. However, the Earth produced simulants have non-lunar materials in them that create volatiles that aren’t representative of lunar regolith. Therefore, a five month effort was conducted to establish a heat treat method to remove these non-lunar materials. Tests were conducted using TGA mass spectrometry, heating in vacuum and conducting mass spectrometry, dielectric and DTA, Raman, BET, particle size analysis, morphological analysis, carbon and sulfur chemical content determination and microscopy. The process has been scaled-up to 6 kg batch size and undergoing evaluation. A 36 kg batch size is the target for JSC-1A and other limited availability simulants. These calcining protocols will be standard for NASA and beyond. MSCC has also created scalable processes for fabricating synthetic lunar materials. Processes to fabricate Anorthite (plagioclase CaAl2Si2O8), Diopside (pyroxene CaMgSi₂O₆), and Enstatite (pyroxene Mg2Si2O6) have been generated. These materials will enable generation of microwave sintering models to bound various composition ranges anticipated on the Moon, therefore mitigating the need for a precise simulant with respect to location on the Moon. Successful microwave sintering in air using a horn applicator was demonstrated. All previous microwave vacuum sintering in the literature was at small scale and in a contained enclosure thus taking advantage of reflections. This is the first to use a lunar like microwave applicator to sinter ceramic in a bed as it would be done on the Moon. Small scale and inert sintering were conducted to assist in developing protocols with quicker turnaround times than larger scale testing. Testing has anchored thermal analysis predicting heat flow in vacuum during microwave sintering. Thermal conductivity testing was also initiated. Microwave coupling to the regolith has been modeled by multiple organizations and with different software packages. At least six horn designs and applicator configurations for both magnetron and solid state sources are being examined. Optimal simulant container designs for microwaves have also been generated. The power and electronics design for the solid state microwave system has been initiated. Concept designs for a lander based microwave sintering have been evaluated.
Progress of chemical characterization of asteroid Ryugu samples
It is believed that meteorites come from asteroids. Samples of asteroid (25143) Itokawa returned by the JAXA Hayabusa mission revealed that S-type asteroids are composed of materials consistent with the ordinary chondrite class[1,2]. The JAXA Hayabusa 2 [3]spacecraft launched on December 3rd, 2014 towards an asteroid (162173) Ryuguto clarify relationships between C-type asteroids and the carbonaceous chondrite class. Remote sensing observations from Hayabusa 2 show that (1) the albedo of Ryugu is darker than those of every known meteorite class[4, 5], (2) an absorption band at 2.72 μm indicates that phyllosilicates are ubiquitous on Ryugu [5],(3) the strength and shape of the absorption band feature suggests that Ryugu materials experienced heating above 300 °C[6], and (4) thermal inertia suggests that Ryugu materials are more porous than every known carbonaceous chondrite[7]. These results suggest that carbonaceous chondrite class materials are plausible for Ryugu materials, but no known carbonaceous chondrite completely matches the results obtained from Ryugu. *Complete abstract available in attached document