SEARCH · Search NASA

Results for “HOVERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

All sources NASA NTRS DOE OSTI

NASA NTRS1991

Flow visualization and flow field measurements of a 1/12 scale tilt rotor aircraft in hover

The results are given of flow visualization studies and inflow velocity field measurements performed on a 1/12 scale model of the XV-15 tilt rotor aircraft in the hover mode. The complex recirculating flow due to the rotor-wake-body interactions characteristic of tilt rotors was studied visually using neutrally buoyant soap bubbles and quantitatively using hot wire anemometry. Still and video photography were used to record the flow patterns. Analysis of the photos and video provided information on the physical dimensions of the recirculating fountain flow and on details of the flow including the relative unsteadiness and turbulence characteristics of the flow. Recirculating flows were also observed along the length of the fuselage. Hot wire anemometry results indicate that the wing under the rotor acts to obstruct the inflow causing a deficit in the inflow velocities over the inboard region of the model. Hot wire anemometry also shows that the turbulence intensities in the inflow are much higher in the recirculating fountain reingestion zone.

Coffen, Charles D.↗

NASA NTRS1991

A comparative analysis of XV-15 tiltrotor hover test data and WOPWOP predictions incorporating the fountain effect

Acoustic measurements from a hovering full scale XV-15 tilt rotor with the advanced technology blades are presented which show the directionality of fountain effect noise. Predicted acoustic directivity results are also presented which show agreement with the measured data. The aeroacoustic code, WOPWOP, was used in conjunction with a mathematical model which simulated the fountain recirculation aerodynamic effect on the rotor blade surface pressures. The predictions were used to identify the spike character in the measured data as fountain effect associated noise. The directivity of the fountain effect noise was observed to be dominant at the rear of the aircraft with increased intensities 45 degrees below the rotor disk planes.

Rutledge, Charles K.↗

NASA NTRS1991

An experimental study of the sensitivity of helicopter rotor blade tracking to root pitch adjustment in hover

The sensitivity of blade tracking in hover to variations in root pitch was examined for two rotor configurations. Tests were conducted using a four bladed articulated rotor mounted on the NASA-Army aeroelastic rotor experimental system (ARES). Two rotor configurations were tested: one consisting of a blade set with flexible fiberglass spars and one with stiffer (by a factor of five in flapwise and torsional stiffnesses) aluminum spars. Both blade sets were identical in planform and airfoil distribution and were untwisted. The two configurations were ballasted to the same Lock number so that a direct comparison of the tracking sensitivity to a gross change in blade stiffness could be made. Experimental results show no large differences between the two sets of blades in the sensitivity of the blade tracking to root pitch adjustments. However, a measurable reduction in intrack coning of the fiberglass spar blades with respect to the aluminum blades is noted at higher rotor thrust conditions.

Wilkie, W. Keats↗

NASA NTRS1991

On the estimation of jet-induced fountain lift and additional suckdown in hover for two-jet configurations

Currently available methods for estimating the net suckdown induced on jet V/STOL aircraft hovering in ground effect are based on a correlation of available force data and are, therefore, limited to configurations similar to those in the data base. Experience with some of these configurations has shown that both the fountain lift and additional suckdown are overestimated but these effects cancel each other for configurations within the data base. For other configurations, these effects may not cancel and the net suckdown could be grossly overestimated or underestimated. Also, present methods do not include the prediction of the pitching moments associated with the suckdown induced in ground effect. An attempt to develop a more logically based method for estimating the fountain lift and suckdown based on the jet-induced pressures is initiated. The analysis is based primarily on the data from a related family of three two-jet configurations (all using the same jet spacing) and limited data from two other two-jet configurations. The current status of the method, which includes expressions for estimating the maximum pressure induced in the fountain regions, and the sizes of the fountain and suckdown regions is presented. Correlating factors are developed to be used with these areas and pressures to estimate the fountain lift, the suckdown, and the related pitching moment increments.

Kuhn, Richard E.↗

NASA NTRS1991

Helicopter control response types for hover and low-speed near-earth tasks in degraded visual conditions

The NASA-Ames Vertical Motion Simulator and Dig 1 Computer Image Generator (CIG) have been used to simulate a helicopter cockpit in a degraded visual environment in order to assess several control-response types during low-level flight. CIG visibility was reduced to the point where the horizon and other far-field cues were indiscernible. The control-response types encompassed a rate command, an attitude command/hold, and a translational rate command; piloting tasks were hover, vertical landing, a pirouette, acceleration/deceleration, and a sidestep maneuver. Visual cue ratings with a rate-command response type were initially collected to set the usable cue environment at 3. A rate-command response type provided poor Level 2 handling qualities.

Blanken, Christopher L.↗

NASA NTRS1992

Acoustic characteristics and dynamic structural loading of an ASTOVL aircraft in hover

Measurements of surface dynamic loading and freestream acoustics were made for an ASTOVL model in hover, to quantify the effects of elevated temperature on the acoustic field and surface loading. Data were acquired for a many combinations of operating parameters: model height above the ground plane, nozzle pressure ratio, and jet exit stagnation temperature. For many conditions, strong tones were observed, with amplitudes up to 150 dB. The frequencies of the strongest tones were well predicted by a model assuming feedback between the nozzle exit and the ground plane. The model also accounts for many of the variations in frequency observed with changes in model height, nozzle pressure ratio, and jet temperature. Broadband sound pressure levels up to 170 dB were also recorded. The maximum levels occurred at approximately 3 equivalent jet diameters above the ground plane. For the majority of the cases, the increase in noise due to temperature was less than expected based on free jet correlations.

Mitchell, L. K.↗

NASA NTRS1992

Navier-Stokes computation of wing leading edge tangential blowing for a tilt rotor in hover

The effect of a thin tangential jet located at the leading edge of the wing of a tilt rotor configuration in hover is computed using the thin-layer Navier-stokes equations. Computations showed that leading edge tangential blowing is effective in reducing the download caused by the impingement of the rotor download caused by the impingement of the rotor downwash on the wing. Results from the numerical model support previous experimental findings that download reduction is due mainly to a decrease in upper surface pressure and not an increase in pressure on the lower surface. The numerical solution clearly shows that because of the three-dimensionality of the flow field, the download could be reduced further by allowing a spanwise variation in blowing strength.

Fejtek, Ian↗

NASA NTRS1991

A study of rotor wake development and wake/body interactions in hover

Experiments were conducted to document the wake geometry and interactional effects between a hovering rotor and a body representing a simplified helicopter fuselage. The wide-field shadowgraph technique was used to visualize the rotor wake vortices and to obtain quantitative information on the wake trajectories, with and without the presence of the body. Particular attention was paid to visualizing and quantifying the wake geometry during the direct impingement of tip vortices on the body surface. The rotor performance with and without the fuselage is also discussed.

Bagai, A.↗

NASA NTRS1991

Experimental and computational studies of hovering rotor flows

HELIX-I, an essentially standard full-potential CFD helicopter rotor code, is unique in its use of the Clebisch kinematical flow description to specify a freely convecting wake and its capacity for predicting hover performance. A study is presently performed to assess the method's sensitivity to grids and solution-starting techniques. The effects of these parameters on thrust, power, load distribution, and wake geometry are ascertained and compared with an extensive rotor data base. The use of a fairly accurate starting solution yields no obvious advantage over the use of a novel starting method which employs a succession of diminishing artificial flows.

Nsi Mba, M.↗

NASA NTRS1992

Flowfield of a lifting rotor in hover - A Navier-Stokes simulation

The viscous, three-dimensional flowfield of a lifting helicopter rotor in hover is calculated by using an upwind, implicit, finite-difference numerical method for solving the thin layer Navier-Stokes equations. The induced effects of the wake, including the interaction of tip vortices with successive blades, are calculated as part off the overall flowfield solution without using any ad hoc wake models. Comparison of the numerical results for the subsonic and transonic conditions show good agreement with the experimental data and with the previously published Navier-Stokes calculations using a simple wake model. Some comparisons with Euler calculations are also presented, along with some discussions of the grid refinement studies.

Srinivasan, G. R.↗

NASA NTRS1991

The computation and validation of hovering rotor performance

Recent experience with the HELIX-I code is presented, and its ability to predict the flow and performance of both conventional rotors and the unconventional anhedral parabolic tip rotor utilized on the Super Puma MK2 is described. HELIX-I is a standard full-potential rotor code having the ability to efficiently predict the detailed flow on a rotor blade, including 3D, transonic, and weak viscous effects (using appropriate boundary layer analyses). The resulting code is the first full-potential CFD code with the ability to model free wake convection and the first CFD code of any type to predict hover performance.

Mba, M. N.↗

NASA NTRS1993

An analytic modeling and system identification study of rotor/fuselage dynamics at hover

A combination of analytic modeling and system identification methods have been used to develop an improved dynamic model describing the response of articulated rotor helicopters to control inputs. A high-order linearized model of coupled rotor/body dynamics including flap and lag degrees of freedom and inflow dynamics with literal coefficients is compared to flight test data from single rotor helicopters in the near hover trim condition. The identification problem was formulated using the maximum likelihood function in the time domain. The dynamic model with literal coefficients was used to generate the model states, and the model was parametrized in terms of physical constants of the aircraft rather than the stability derivatives resulting in a significant reduction in the number of quantities to be identified. The likelihood function was optimized using the genetic algorithm approach. This method proved highly effective in producing an estimated model from flight test data which included coupled fuselage/rotor dynamics. Using this approach it has been shown that blade flexibility is a significant contributing factor to the discrepancies between theory and experiment shown in previous studies. Addition of flexible modes, properly incorporating the constraint due to the lag dampers, results in excellent agreement between flight test and theory, especially in the high frequency range.

Hong, Steven W.↗

NASA NTRS1992

Experimental study of rotor wake/body interactions in hover

Experiments were conducted to document the tip vortex geometries and interactional effects betwen a hovering rotor and a body representing a simplified helicopter fuselage. The wide-field shadowgraph technique was used to visualize the rotor tip vortices and to obtain quantitative information on the trajectories, with and without the presence of the body. It was found that the effects of the body caused significant changes to both the radial contraction and axial displacements of the tip vortices compared to the isolated case. Direct impingement of the tip vortices on the body surface was also observed, and found to cause large local wake deformations. The rotor performance was significantly affected by the body, producing a higher figure of merit relative to the isolated case.

Bagai, A.↗

NASA NTRS1992

Multidisciplinary analysis and sensitivity derivatives for isolated helicopter rotors in hover

A new method is presented for using Navier-Stokes results in the system analysis and sensitivity derivative computations for a helicopter rotor in hover. The system coupling includes the interactions between rotor performance, rotor structural properties and aerodynamics (i.e., airfoil shape). Emphasis is placed on the use of high fidelity Navier-Stokes algorithms for the aerodynamic problem. The present formulation is chosen to reduce the number of sensitivity derivative equations and their dimensions as much as possible. In addition, an alternative adjoint formulation is presented which dramatically reduces the computational requirement for disciplines in which there may be a large number of design variables (e.g., aerodynamics). The theoretical method makes use of a combination of derivatives from each discipline; the computation of these derivatives has already been shown to be feasible. Sample computations for the aerodynamic-rotor model coupling and an associated sensitivity derivative are also presented.

Jones, Henry E.↗

NASA NTRS1991

Far-field hover acoustic characteristics of the XV-15 tiltrotor aircraft with Advanced Technology Blades

An experimental investigation has been conducted with the XV-15 tilt-rotor VTOL aircraft in order to ascertain the noise-reduction efficacy of Advanced Technology Blades (ATBs). Attention is given to acoustic directivity characteristics in the lower hemisphere of the sound field. Modest overall sound pressure levels (OASPLs) were measured near the in-plane position, showing that thickness noise is not significant in hover when ATBs are used; rotor tip-speed reductions reduced the average OASPL by nearly 8 dB in-plane and by nearly 5 dB at 12.6 deg below the rotor plane.

Conner, David A.↗

NASA NTRS1991

A comparative analysis of XV-15 tiltrotor hover test data and WOPWOP predictions incorporating the fountain effect

Acoustic measurements from a hovering full-scale XV-15 tiltrotor with the advanced technology blades are presented which show the directionality of fountain effect noise. Predicted activity directivity results are also presented which show agreement with the measured data. The aeroacoustic code, WOPWOP, was used in conjunction with a mathematical model which simulated the fountain/recirculation aerodynamic effect on the rotors' blade surface pressures. The predictions were used to identify the spike character in the measured data as fountain effect associated noise. The directivity of the fountain effect noise was observed to be dominant at the rear of the aircraft with increased intensities 45 degrees below the rotor disk planes.

Rutledge, Charles K.↗

NASA NTRS1991

Flow visualization and flow field measurements of a 1/12 scale tilt rotor aircraft in hover

Coffen, Charles D.↗

NASA NTRS1993

Accuracy of Tilt Rotor Hover Performance Predictions

The accuracy of various methods used to predict tilt rotor hover performance was established by comparing predictions with large-scale experimental data. A wide range of analytical approaches were examined. Blade lift was predicted with a lifting line analysis, two lifting surface analyses, and by a finite-difference solution of the full potential equation. Blade profile drag was predicted with two different types of airfoil tables and an integral boundary layer analysis. The inflow at the rotor was predicted using momentum theory, two types of prescribed wakes, and two free wake analyses. All of the analyses were accurate at moderate thrust coefficients. The accuracy of the analyses at high thrust coefficients was dependent upon their treatment of high sectional angles of attack on the inboard sections of the rotor blade. The analyses which allowed sectional lift coefficients on the inboard stations of the blade to exceed the maximum observed in two-dimensional wind tunnel tests provided better accuracy at high thrust coefficients than those which limited lift to the maximum two-dimensional value. These results provide tilt rotor aircraft designers guidance on which analytical approaches provide the best results, and the level of accuracy which can be expected from the best analyses.

Felker, Fort F.↗