SEARCH · Search NASA

Results for “Higher order calculations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

All sources NASA NTRS DOE OSTI

NASA NTRS1991

Comparison of 2-D and 3-D models of grid erosion in an ion thruster

Numerical results of particle-in-cell/Monte Carlo calculations of accelerator grid erosion in an ion thruster are presented. Specifically, it is shown that a three-dimensional model is required to account for the experimentally observed pitting of the accelerator grid between grid apertures. Some comparisons with earlier two-dimensional, axisymmetric model are made, and it is shown that, for identical operating conditions of the thruster, the wear-through time in the three-dimensional model is about two to three times higher than that obtained previously with the two-dimensional model, namely on the order of 10,000 hours for sample calculation.

Peng, Xiaohang↗

DOE OSTI2019

Higher-Order Topology, Monopole Nodal Lines, and the Origin of Large Fermi Arcs in Transition Metal Dichalcogenides XTe 2 ( X =Mo,W )

In recent years, transition metal dichalcogenides (TMDs) have garnered great interest as topological materials. In particular, monolayers of centrosymmetric β-phase TMDs have been identified as 2D topological insulators (TIs), and bulk crystals of noncentrosymmetric γ-phase MoTe 2 and WTe 2 have been identified as type-II Weyl semimetals. However, angle-resolved photoemission spectroscopy and STM probes of these semimetals have revealed huge, arclike surface states that overwhelm, and are sometimes mistaken for, the much smaller topological surface Fermi arcs of bulk type-II Weyl points. In this Letter, we calculate the bulk and surface electronic structure of both β- and γ-MoTe 2 . We find that β-MoTe 2 is, in fact, a $\mathbb Z_4$-nontrivial higher-order TI (HOTI) driven by double band inversion and exhibits the same surface features as γ-MoTe 2 and γ-WTe 2 . Further, we discover that these surface states are not topologically trivial, as previously characterized by the research that differentiated them from the Weyl Fermi arcs but, rather, are the characteristic split and gapped fourfold Dirac surface states of a HOTI. In β-MoTe 2 , this indicates that it would exhibit helical pairs of hinge states if it were bulk insulating, and in γ-MoTe 2 and γ-WTe 2 , these surface states represent vestiges of HOTI phases without inversion symmetry that are nearby in parameter space. Using nested Wilson loops and first-principles calculations, we explicitly demonstrate that, when the Weyl points in γ-MoTe 2 are annihilated, which may be accomplished by symmetry-preserving strain or lattice distortion, γ-MoTe 2 becomes a nonsymmetry-indicated, noncentrosymmetric HOTI. We also show that, when the effects of spin-orbit coupling are neglected, β-MoTe 2 is a nodal-line semimetal with $\mathbb Z_2$-nontrivial monopole nodal lines (MNLSM). This finding confirms that MNLSMs driven by double band inversion are the weak-spin-orbit coupling limit of HOTIs, implying that MNLSMs are higher-order topological semimetals with flat-band-like hinge states, which we find to originate from the corner modes of 2D “fragile” TIs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NASA NTRS1987

A comparative study of plasma heating by ion acoustic and modified two-stream instabilities at subcritical quasi-perpendicular shocks

Plasma heating due to the ion acoustic instability and the modified two-stream instability is examined for quasi-perpendicular subcritical shocks. Electron and ion heating is investigated as a function of upstream electron to ion temperature ratio and plasma beta using second-order heating rates. A simple shock model is employed in which the cross-field electron-ion drift speed is adjusted until the total (adiabatic plus anomalous) heating matches that required by the Rankine-Hugoniot relations. Quantities such as the width of the shock and the maximum electric field fluctuations are also calculated, and the results are compared with the ISEE data set of subcritical bow shock crossings. The observed width of the shock, the amount of plasma heating, and the low-frequency electric field intensity are in reasonably good agreement with the calculations for the modified two-stream instability. On the other hand, the wave intensities at higher frequency are about 4 orders of magnitude smaller than those predicted for the ion acoustic instability at saturation, consistent with the fact that the measured shock widths imply cross-field drift speeds that are below threshold for this instability. It is therefore concluded that the dissipation at these shocks is most likely due to the lowest frequency, modified two-stream instability.

Winske, D.↗

DOE OSTI2024

Atomistic simulations to reveal HIP-bonding mechanisms of Al6061/Al6061

Molecular dynamics simulations were employed to understand the diffusion bonding process during hot isostatic pressing (HIP) of Al6061/Al6061 alloy. Simulations of the HIP process reveal atomistic phenomena that are difficult or unlikely to be observed experimentally and provide useful insights into the mechanism of diffusion and bonding. Here, the results reveal that at the start of the HIP process, a massive incursion of oxygen atoms occurs from the pre-existing γ-Al 2 O 3 to the 6061 region across the interphase interface. These oxygen atoms interact with the enriched Mg atom layer present at the existing γ-Al 2 O 3 and 6061 matrix to form a secondary complex Mg 2 Al 2 O 5 phase. Diffusion calculations also show that transport of atoms due to the applied pressure is 4–5 orders of magnitude higher than would occur in the absence of HIP conditions. The Mg 2 Al 2 O 5 phase also provides efficient pathways for the rapid transport of Mg atoms. Because of the higher diffusion coefficients observed for Mg within the phase, Mg atoms can move more swiftly compared to their diffusion within other phases such as γ-Al 2 O 3 . This accelerated mobility facilitates the rapid movement of Mg atoms across the interface, leading to changes in the local composition and the potential growth of the Mg 2 Al 2 O 5 phase.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Beyond the electric-dipole approximation in simulations of x-ray absorption spectroscopy: Lessons from relativistic theory

Herein we present three schemes to go beyond the electric-dipole approximation in x-ray absorption spectroscopy calculations within a four-component relativistic framework. The first is based on the full semi-classical light–matter interaction operator and the two others on a truncated interaction within the Coulomb gauge (velocity representation) and multipolar gauge (length representation). We generalize the derivation of the multipolar gauge to an arbitrary expansion point and show that the potentials corresponding to different expansion points are related by a gauge transformation, provided that the expansion is not truncated. This suggests that the observed gauge-origin dependence in the multipolar gauge is more than just a finite-basis set effect. The simplicity of the relativistic formalism enables arbitrary-order implementations of the truncated interactions, with and without rotational averaging, allowing us to test their convergence behavior numerically by comparison to the full formulation. We confirm the observation that the oscillator strength of the electric-dipole allowed ligand K -edge transition of TiCl 4 , when calculated to the second order in the wave vector, becomes negative but also show that inclusion of higher-order contributions allows convergence to the result obtained using the full light–matter interaction. However, at higher energies, the slow convergence of such expansions becomes dramatic and renders such approaches at best impractical. When going beyond the electric-dipole approximation, we therefore recommend the use of the full light–matter interaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Probing New Bosons and Nuclear Structure with Ytterbium Isotope Shifts

In this Letter, we present mass-ratio measurements on highly charged Yb 42+ ions with a precision of 4 ×10 -12 and isotope-shift measurements on Yb + on the 2 S 1/2 → 2 D 5/2 and 2 S 1/2 → 2 F 7/2 transitions with a precision of 4 ×10 -9 for the isotopes 168,170,172,174,176 Yb. We present a new method that allows us to extract higher-order changes in the nuclear charge distribution along the Yb isotope chain, benchmarking ab initio nuclear structure calculations. Additionally, we perform a King plot analysis to set bounds on a fifth force in the keV/c 2 to MeV/c 2 range coupling to electrons and neutrons.

74 ATOMIC AND MOLECULAR PHYSICS↗

DOE OSTI2021

Steam-created grain boundaries for methane C–H activation in palladium catalysts

Defects may display high reactivity because the specific arrangement of atoms differs from crystalline surfaces. We demonstrate that high-temperature steam pretreatment of palladium catalysts provides a 12-fold increase in the mass-specific reaction rate for carbon-hydrogen (C–H) activation in methane oxidation compared with conventional pretreatments. Through a combination of experimental and theoretical methods, we demonstrate that an increase in the grain boundary density through crystal twinning is achieved during the steam pretreatment and oxidation and is responsible for the increased reactivity. The grain boundaries are highly stable during reaction and show specific rates at least two orders of magnitude higher than other sites on the palladium on alumina (Pd/Al 2 O 3 ) catalysts. Theoretical calculations show that strain introduced by the defective structure can enhance C–H bond activation. Introduction of grain boundaries through laser ablation led to further rate increases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

A Study of QCD Radiation in VBF Higgs Production with Vincia and Pythia

We discuss and illustrate the properties of several parton-shower algorithms available in Pythia and Vincia, in the context of Higgs production via vector boson fusion (VBF). In particular, the distinctive colour topology of VBF processes allows to define observables sensitive to the coherent radiation pattern of additional jets. We study a set of such observables, using the Vincia sector-antenna shower as our main reference, and contrast it to Pythia's transverse-momentum-ordered DGLAP shower as well as Pythia's dipole-improved shower. We then investigate the robustness of these predictions as successive levels of higher-order perturbative matrix elements are incorporated, including next-to-leading-order matched and tree-level merged calculations, using Powheg Box and Sherpa respectively to generate the hard events.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

NASA NTRS1979

Higher-order skewness and excess coefficients of some probability distributions applicable to optical propagation phenomena

Expressions are derived for higher-order skewness and excess coefficients using central moments and cumulants up to 8th order. These coefficients are then calculated for three probability distributions: (1) Log-normal, (2) Rice-Nakagami, and (3) Gamma distributions. Curves are given to shown the variation of skewness with excess coefficients for these distributions. These curves are independent of the particular distribution parameters. This method is useful for studying fluctuating phenomena, which obey non-Gaussian statistics.

Majumdar, A. K.↗

NASA NTRS2003

Geomagnetic Field During a Reversal

It has frequently been suggested that only the geomagnetic dipole, rather than higher order poles, reverse during a geomagnetic field reversal. Under this assumption the geomagnetic field strength has been calculated for the surface of the Earth for various steps of the reversal process. Even without an eminent a reversal of the field, extrapolation of the present secular change (although problematic) shows that the field strength may become zero in some geographic areas within a few hundred years.

Heirtzler, J. R.↗

NASA NTRS1992

Workshop on Engineering Turbulence Modeling

Discussed here is the future direction of various levels of engineering turbulence modeling related to computational fluid dynamics (CFD) computations for propulsion. For each level of computation, there are a few turbulence models which represent the state-of-the-art for that level. However, it is important to know their capabilities as well as their deficiencies in order to help engineers select and implement the appropriate models in their real world engineering calculations. This will also help turbulence modelers perceive the future directions for improving turbulence models. The focus is on one-point closure models (i.e., from algebraic models to higher order moment closure schemes and partial differential equation methods) which can be applied to CFD computations. However, other schemes helpful in developing one-point closure models, are also discussed.

Povinelli, Louis A.↗

NASA NTRS2004

NASA Tech Briefs, May 2004

Topics include: Embedded Heaters for Joining or Separating Plastic Parts; Curing Composite Materials Using Lower-Energy Electron Beams; Aluminum-Alloy-Matrix/Alumina-Reinforcement Composites; Fibrous-Ceramic/Aerogel Composite Insulating Tiles; Urethane/Silicone Adhesives for Bonding Flexing Metal Parts; Scalable Architecture for Multihop Wireless ad Hoc Networks; Improved Thermoplastic/Iron-Particle Transformer Cores; Cooperative Lander-Surface/Aerial Microflyer Missions for Mars Exploration Dual-Frequency Airborne Scanning Rain Radar Antenna System Eight-Channel Continuous Timer Reduction of Phase Ambiguity in an Offset-QPSK Receiver Ambient-Light-Canceling Camera Using Subtraction of Frames Lightweight, Flexible, Thin, Integrated Solar-Power Packs Windows(Registered Trademark)-Based Software Models Cyclic Oxidation Behavior Software for Analyzing Sequences of Flow-Related Images Improved Ball-and-Socket Docking Mechanism Two-Stage Solenoid Ordered Nanostructures Made Using Chaperonin Polypeptides Low-Temperature Plasma Functionalization of Carbon Nanotubes Improved Cryostat for Cooling a Wide Panel Current Pulses Momentarily Enhance Thermoelectric Cooling Hand-Held Color Meters Based on Interference Filters Calculating Mass Diffusion in High-Pressure Binary Fluids Fresnel Lenses for Wide-Aperture Optical Receivers Increasing Accuracy in Computed Inviscid Boundary Conditions Higher-Order Finite Elements for Computing Thermal Radiation Radar for Monitoring Hurricanes from Geostationary Orbit Time-Transfer System for Two Orbiting Spacecraft

Source record↗

NASA NTRS1987

Validation of EDQNM for subgrid and supergrid models

From preliminary calculations it was concluded that the two-point Eddy Damping Quasi-Normal Markovian (EDQNM) closure accurately describes the behavior of second order moments. This closure can be applied as subgrid and supergrid models for Large Eddy Simulations at higher Reynolds numbers. In the case of homogeneous anisotropic turbulence, when the nonlinear terms are introduced the calculation becomes quite onerous but is still considerably less expensive than the calculation of a DS. The major merit of two-point closure models is that they can be easily applied to flows at Reynolds numbers that are unreachable by a DS. Work is in progress to derive expressions for the nonlinear terms that give good global conservation properties.

Orlandi, P.↗

DOE OSTI2023

Anomalous dimensions from soft Regge constants

Using an effective field theory (EFT) formalism for forward scattering, we reconsider the factorization of 2 → 2 scattering amplitudes in the Regge limit. Expanding the amplitude in gauge invariant operators labelled by the number of Glauber exchanges, allows us to further factorize the standard impact factors into separate collinear and soft functions. The soft functions are universal, and describe radiative corrections to the Reggeized gluon states exchanged by the collinear projectiles. Remarkably, we find that the one-loop soft function for the single Reggeized gluon state is given to O(ϵ) in terms of the two-loop cusp and two-loop rapidity anomalous dimensions. We argue that this iterative structure follows from the simple action of crossing symmetry in the forward scattering limit, which in the EFT allows us to replace the divergent part of a soft loop by a much simpler Glauber loop. We use this correspondence to provide a simple calculation of the two-loop Regge trajectory using the EFT. We then explore its implications at higher perturbative orders, and derive the maximally matter dependent contributions to the Regge trajectory to all loop orders, i.e. the terms ~ α$^{k+1}_{s}$n$^{k}_{f}$ for any k, where n f is the number of massless flavors. These simplifications suggests that the EFT approach to the Regge limit will be helpful to explore and further understand the structure of the Regge limit.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2023

Highly active, ultra-low loading single-atom iron catalysts for catalytic transfer hydrogenation

Highly effective and selective noble metal-free catalysts attract significant attention. Here, a single-atom iron catalyst is fabricated by saturated adsorption of trace iron onto zeolitic imidazolate framework-8 (ZIF-8) followed by pyrolysis. Its performance toward catalytic transfer hydrogenation of furfural is comparable to state-of-the-art catalysts and up to four orders higher than other Fe catalysts. Isotopic labeling experiments demonstrate an intermolecular hydride transfer mechanism. First principles simulations, spectroscopic calculations and experiments, and kinetic correlations reveal that the synthesis creates pyrrolic Fe(II)-plN 3 as the active center whose flexibility manifested by being pulled out of the plane, enabled by defects, is crucial for collocating the reagents and allowing the chemistry to proceed. The catalyst catalyzes chemoselectively several substrates and possesses a unique trait whereby the chemistry is hindered for more acidic substrates than the hydrogen donors. This work paves the way toward noble-metal free single-atom catalysts for important chemical reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Determining the 9 $\mathrm{Be}$($n, γ$) 10 $\mathrm{Be}$ integral cross section at fission neutron energies

The 9 B neutron capture cross section has significant implications for Be materials in the nuclear industry as well as the α process in stellar nucleosynthesis. While the cross section is well constrained at thermal neutron energies, there is a lack of experimental data at higher neutron energies, and the evaluated nuclear data libraries can differ by up to two orders of magnitude. We calculate the 9 Be(n, γ) 10 Be integral cross section at fission neutron energies in an effort to resolve disagreements amongst the nuclear data libraries. Foil irradiation experiments were performed using the Flattop critical assembly at the National Criticality Experiments Research Center with either the highly enriched U or Pu cores, with target foil stacks placed at multiple locations to exploit different neutron energy profiles. Accelerator mass spectrometry was used to measure the 10 Be/ 9 Be ratio in irradiated Be foils, while all other activation products were quantified through gamma spectrometry. The experiments were simulated using the Monte Carlo N-Particle radiation transport code and combined with experimental results to determine the total neutron fluence, while the staysl-pnnl suite and fispact-ii code were used to validate the model and assess the systematic uncertainty. The new 9 Be(n, γ) 10 Be integral cross sections calculated in this work are 26.5 ± 2.2µb at 0.59 ± 0.07 MeV, 24 ± 3 µb at 0.98 ± 0.14 MeV, 21.7 ± 1.3 µb at 1.26 ± 0.11 MeV, 21.8 ± 1.4 µb at 1.32 ± 0.11 MeV, and 18.6 ± 1.1 µb at 1.46 ± 0.13 MeV. These results do not agree with integral cross sections from any of the nuclear data library evaluations. Discrepancies between the new integral cross sections reported here and the nuclear data libraries suggest a more complex cross-section structure in the MeV range which allows for more resonance contributions, and more work is needed to further constrain the evaluated cross sections.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

DOE OSTI2024

Thermoelectric properties of SnSe and SnSe 2 single crystals

Thermoelectric materials can serve for conversion between thermal and electrical energy. In the search for new thermoelectric materials, layered SnSe and SnSe 2 are promising candidates. Here we have successfully synthesized SnSe and SnSe 2 single crystals by the modified Bridgman method and studied their thermoelectric properties: thermopower (S), thermal conductivity (κ), and electrical conductivity (σ) in the temperature range between 2 K and 400 K, which are absent in the literature. In particular, the kink observed in the thermopower corresponds to the metallic-nonmetallic crossover temperature for both SnSe and SnSe 2 , reflecting their inherent electronic nature. Compared to SnSe 2 above 100 K, we find that SnSe exhibits higher electrical conductivity, higher thermopower, and lower thermal conductivity, thus resulting in the higher figure of merit. Hall effect measurements reveal that the Hall mobility in SnSe is an order higher than that in SnSe 2 , advancing its thermoelectric performance. These experimental results are supported by first principles calculations, which indicate that the inequivalent Sn-Se bonding lengths help improve the figure of merit of SnSe.

36 MATERIALS SCIENCE↗

NASA NTRS1975

An analytical study of a multicycle controllable twist rotor

A rotor employing a servo-flap to effect blade torsional deflections (the Kaman Controllable Twist Rotor) has been used in a theoretical study to assess the potential of multicyclic flap control, (i.e., 1P, 2P, 3P, and 4P flap deflections). The results show that virtual elimination of pylon vibratory loads may be achieved with concurrent blade bending moments reduced by 50%. The amplitude requirements of the higher harmonic deflections are of the order of 3 or 4 deg. The study is in two parts; the calculation of rotor loads for specific combinations of multicyclic flap deflections by a typical rotor computer analysis, and an analysis of those results to determine optimum combinations of the multicyclic flap control. The paper discusses the analysis and indicates the potentials of a multicyclic controllable twist rotor.

Mccloud, J. L., III↗