Hubble Space Telescope: The archived exposures catalog, version 2.0
The archived exposures catalog for the Hubble Space Telescope is presented. Information is in table format.
Borne, Kirk↗
SEARCH · Search NASA
Results for “Hubble”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The Hubble Space Telescope observations of X-ray nova Muscae 1991 and its spectral evolution
Hubble Space Telescope Faint Object Spectrograph (FOS) Faint Object Camera (FOC) and observations of Nova Muscae 1991 obtained on May 14-15, 1991 are presented and discussed. A nearly featureless continuum with broad 2200 A absorption feature and no Balmer jump is found. The FOS spectrum is modeled, including previous multiepoch IUE, optical, and X-ray data using a simple blackbody accretion disk model. It is found that the mass transfer rate decays exponentially with a characteristic time of about 43 days. The cooling front predicted by the disk instability model should have been observable, but was not seen.
Cheng, F. H.↗
Imaging of four planetary nebulae in the Magellanic Clouds using the Hubble Space Telescope Faint Object Camera
Using the Faint Object Camera on-board the Hubble Space Telescope, we have obtained images of four planetary nebulae (PNe) in the Magellanic Clouds, namely N2 and N5 in the SMC and N66 and N201 in the LMC. Each nebula was imaged through two narrow-band filters isolating forbidden O III 5007 and H-beta, for a nominal exposure time of 1000 s in each filter. In forbidden O III, SMC N5 shows a circular ring structure, with a peak-to-peak diameter of 0.26 arcsec and a FWHM of 0.35 arcsec while SMC N2 shows an elliptical ring structure with a peak-to-peak diameter of 0.26 x 0.21. The expansion ages corresponding to the observed structures in SMC N2 and N5 are of the order of 3000 yr. LMC N201 is very compact, with a FWHM of 0.2 arcsec in H-beta. The Type I PN LMC N66 is a multipolar nebula, with the brightest part having an extent of about 2 arcsec and with fainter structures extending over 4 arcsec.
Blades, J. C.↗
Studying cataclysmic variables with the Hubble Space Telescope
The Hubble Space Telescope with its UV and imaging capabilities will allow new methods of investigating cataclysmic variables to be used. It provides the first opportunity to obtain high-time-resolution UV observations of cataclysmic variables, both spectroscopically and photometrically. Phase-resolved observations of eclipses can now be obtained which will allow the UV surface-brightness distributions in accretion disks to be studied. Eclipses of white dwarfs that were not visible in optical light will be detected in some systems. Other variations such as dips (in dwarf novae, intermediate polars, and polars), flickering, and oscillations can also be resolved for the first time in the UV. High-spatial-resolution, long-slit spectroscopy, and imaging with the FOC and WF/PC can be used to study the physical condition and morphology of ejected material around novae, recurrent novae, and precataclysmic variables. The UV and H-alpha imaging capabilities will also enable searches for cataclysmic variables in globular clusters to be carried out further into their cores than has been possible before.
Wood, Janet H.↗
An overview of the Hubble Space Telescope Pointing Control System design and operation
An overview of the Pointing Control System (PCS) design and operational scenarios, a description of the on-orbit performance, the problems encountered, and the resulting modifications that enhance the Hubble Space Telescope mission, are presented. The PCS provides the capability to maneuver the 24,000 lb telescope 90 deg in less than 18 minutes. It also provides the primary functions of attitude reference, attitude control and stabilization.
Andersen, G. C.↗
Astrometric performance characteristics of the Hubble Space Telescope fine guidance sensors
Each of the three fine guidance sensors for the Hubble Space Telescope constitutes a sixth science instrument to be used for astrometry. We detail the tests and results used in choosing one of the three sensors to be the prime astrometer. The Astrometry Science Team has chosen Fine Guidance Sensor (FGS) 3. FGS 3 produces position measurements on a star with V = 17 with a peraxis precision of 0.003 arcsec. The interferometer response function should permit double-star astrometry at least down to V = 16 for the central region of FGS 3. In a 10-h test of the stability of POS-mode astrometric measurements made in FGS 3, we found no scale or orientation variations greater than two parts in 100,000. During this same time period, we found no statistically significant systematic guide-star radial separation changes. Spacecraft jitter is found to be the prime determinant of astrometry success or failure.
Benedict, G. F.↗
Initial performance improvements due to design modifications for the Pointing Control System on the Hubble Space Telescope
Shortly after Hubble Space Telescope was deployed on orbit it became apparent that the Pointing Control System was experiencing unexpectedly large disturbances during certain portions of the orbit. While these disturbances were most pronounced during transitions of the Earth's shadow, significant disruptions to the pointing occurred at other times in the orbit. Careful analysis of the flight data has lead to the conclusion that the disturbances are caused by a combination of rapid thermal deformations of the Solar Arrays together with striction-friction mechanisms within the array that randomly release stored thermal/mechanical energy. This paper describes the baseline pointing control system design and the flight data that characterized the effects of the extraneous disturbances. The paper goes on to describe the procedure for modifying the onboard controller to attenuate the disturbances to levels consistent with the science operations. Flight data demonstrating the improved performance are shown and are tabulated to compare performance prior to and after phase I of the redesign.
Nurre, G. S.↗
Hubble Space Telescope spectroscopy of OB stars in M31
We have obtained UV spectra of two luminous hot stars in M31 with the Hubble Space Telescope. The stars are of late O and WN spectral type and lie on opposite sides of M31. We derive UV extinction curves for M31 which differ from both the Galaxy and the LMC. We find differences between the IS absorbers in both lines of sight in M31 and in the Galactic halo. The stellar wind-driven mass loss of the stars is found to be 10 times lower than in similar Galactic stars. One star appears to be an eclipsing W-R binary.
Hutchings, J. B.↗
Hubble Space Telescope Faint Object Spectrograph and ground-based observations of the broad absorption line quasar 0226-1024
Faint Object Spectrograph data from the Hubble Space Telescope of the broad absorption line quasar 0226-1024 have revealed the presence of 8-10 absorbing ions between 680 and 1000 A (restframe): C III, N III, N IV, O III, O IV, O VI, S V, S VI, possibly Ne VIII, and possibly O V* arising from a metastable excited state. We also present ground-based optical observations of the broad line troughs for the following ions: H I, C IV, N V, Si IV, and possibly Fe III, S IV, P V, and C III* (also arising from a metastable excited state). The results of this fit are used to estimate the absorbing ionic column densities. There is evidence that the broad absorption line clouds are optically thick and either do not completely cover the continuum source or narrow unresolved lines are present.
Korista, Kirk T.↗
Hubble Space Telescope imaging of distant galaxies - 4C 41.17 at z = 3.8
The Hubble Space Telescope has been used to image the continuum emission from 4C 41.17 at z = 3.8, the most distant galaxy known. The galaxy was detected with good signal-to-noise ratio and was spatially resolved at the 0.1 arcsec (440 pc) HST resolution. About 35 percent of this emission is in the form of a high brightness clumpy region extending by about 0.5 arcsec (1.7 kpc), whose morphology is remarkably similar to that of the radio components. A fainter more diffuse region of optical emission extends westward from the center of the nuclear complex for about 1.2 arcsec (5.3 kpc) out along the radio axis. The clumpiness of the optical emission and its close correspondence with the radio structure on the subkiloparsec scale is discussed in the light of current models for high-redshift galaxies. Our observations imply that the material in the center of this galaxy is clumpy on the subkiloparsec scale.
Miley, G. K.↗
The Hubble Space Telescope
The Hubble Space Telescope was launched from the Kennedy Space Center on April 24, 1990. Its initial check-out indicates that all sub-systems of the satellite are working very well, with two key exceptions: The line-of-sight pointing is subject to occasional jitter apparently induced by thermal stresses in the solar arrays; this is expected to be overcome. The telescope mirrors are found to contain approximately 0.5 wave rms of spherical aberration which cannot be overcome by any controls on board the satellite. This defect will limit the scientific performance of the telescope in the short run. However, the aberration can be fully corrected in the optical designs of future replacement instruments, and the delivery schedules of these instruments are being accelerated.
Boggess, Albert↗
Hubble Space Telescope solar cell module thermal cycle test
The Hubble Space Telescope (HST) solar array consists of two identical double roll-out wings designed after the Hughes flexible roll-up solar array (FRUSA) and was developed by the European Space Agency (ESA) to meet specified HST power output requirements at the end of 2 years, with a functional lifetime of 5 years. The requirement that the HST solar array remain functional both mechanically and electrically during its 5-year lifetime meant that the array must withstand 30,000 low Earth orbit (LEO) thermal cycles between approximately +100 and -100 C. In order to evaluate the ability of the array to meet this requirement, an accelerated thermal cycle test in vacuum was conducted at NASA's Marshall Space Flight Center (MSFC), using two 128-cell solar array modules which duplicated the flight HST solar array. Several other tests were performed on the modules. The thermal cycle test was interrupted after 2,577 cycles, and a 'cold-roll' test was performed on one of the modules in order to evaluate the ability of the flight array to survive an emergency deployment during the dark (cold) portion of an orbit. A posttest static shadow test was performed on one of the modules in order to analyze temperature gradients across the module. Finally, current in-flight electrical performance data from the actual HST flight solar array will be tested.
Douglas, Alexander↗
Near-infrared and ultraviolet spectrophotometry of the young planetary nebula Hubble 12
The young planetary nebula Hubble 12 is observed using near-IR and UV spectrophotometry. The brightness of the O I lines, which is greater than in any other planetary nebula yet measured, indicates that fluorescent excitation by stellar continuum is the principal mechanism generating these lines. Extinction, electron density, and electron temperature are determined using infrared measurements combined with UV data and published optical observations. The range in extinction, density, and temperature implies that, within the ionized region, pockets of emission with distinctly different conditions exist. Logarithmic abundances for helium, oxygen, and sulfur are presented.
Rudy, Richard J.↗
Contamination design of a Scientific Instrument Protective Enclosure for the Hubble Space Telescope Servicing Mission
A Scientific Instrument Protective Enclosure (SIPE) was designed to accommodate second generation science instruments (SIs) for the Hubble Space Telescope (HST) First Servicing Mission (FSM). One of the main design drivers for the SIPE is to provide a protective environment for the SIs against particulate and molecular contaminants that pose a viable threat to the SI performance. The focus of this paper will detail the methodology incorporated in the design of the SIPE to provide a controlled environment for SI protection at the launch site, during pre-launch/launch activities, and during on-orbit operations in the Shuttle bay.
Hedgeland, Randy J.↗
Determination of the Hubble Space Telescope effective conic-constant error from direct image measurements
Direct measurement of discernible features in the Hubble Space Telescope (HST) imagery has enabled a self-consistent determination to be made of the effective conic constant of HST images taken with planetary camera 6 (PC-6) of the wide field and planetary camera. Before being corrected for the contribution from PC-6, the conic constant is -1.01429 +/- 0.0002. The correction for PC-6 is less accurately determined but probably lies between -0.0002 and 0.0004. As a result the HST optics are characterized best by a conic constant of -1.0140 +/-0.0003 as obtained from direct image measurements.
Meinel, Aden B.↗
Artificial neural network for the determination of Hubble Space Telescope aberration from stellar images
An artificial-neural-network method, first developed for the measurement and control of atmospheric phase distortion, using stellar images, was used to estimate the optical aberration of the Hubble Space Telescope. A total of 26 estimates of distortion was obtained from 23 stellar images acquired at several secondary-mirror axial positions. The results were expressed as coefficients of eight orthogonal Zernike polynomials: focus through third-order spherical. For all modes other than spherical the measured aberration was small. The average spherical aberration of the estimates was -0.299 micron rms, which is in good agreement with predictions obtained when iterative phase-retrieval algorithms were used.
Barrett, Todd K.↗
Hubble Space Telescope prescription retrieval
Prescription retrieval is a technique for directly estimating optical prescription parameters from images. We apply it to estimate the value of the Hubble Space Telescope primary mirror conic constant. Our results agree with other studies that examined primary-mirror test fixtures and results. In addition they show that small aberrations exist on the planetary-camera repeater optics.
Redding, David↗
Hubble Space Telescope characterized by using phase-retrieval algorithms
We describe several results characterizing the Hubble Space Telescope from measured point spread functions by using phase-retrieval algorithms. The Cramer-Rao lower bounds show that point spread functions taken well out of focus result in smaller errors when aberrations are estimated and that, for those images, photon noise is not a limiting factor. Reconstruction experiments with both simulated and real data show that the calculation of wave-front propagation by the retrieval algorithms must be performed with a multiple-plane propagation rather than a simple fast Fourier transform to ensure the high accuracy required. Pupil reconstruction was performed and indicates a misalignment of the optical axis of a camera relay telescope relative to the main telescope. After we accounted for measured spherical aberration in the relay telescope, our estimate of the conic constant of the primary mirror of the HST was - 1.0144.
Fienup, J. R.↗