Results for “INGE” — Page 15

NASA NTRS2024

Initial Results of Wyatt EIRP- The Ground Based Power and Ambiguity Function Monitor for P-Band Signals of Opportunity Sources

The Wideband Year-round AmbuguiTy-function Track-ing Effective Isotropic Radiated Power (WYATT EIRP)instrument is designed to support P-Band based Sig-nals of Opportunity (SoOp) remote sensing instrument.SoOp utilizes pre-existing non-cooperative microwavetransmitters as sources of illumination. This remotesensing method requires knowledge of the signals EIRP,position and ambugituty function’s shape.WYATT EIRP is designed to periodically generateEIRP measurements, ambuguity functions and transmit-ter elevation. It uses an array of RHCP and LHCPantennas, mounted on a rotating antenna pedestal togenerate EIRP measurements. A secondary observationantenna is placed to allow time difference of arrival mea-surements for transmitter elevation estimates. Both thepedestal and reference antenana are used to generateamituigyt fionctions. The pedestal will also be used tovalidate existing P-Band background noise temperaturesky maps. WYATT EIRP will be commissioned in thefirst quarter of 2024 and will be used to provide calibra-tion data to the upcoming spaceborne SigNals Of Op-portunity: P-Band Investigation (SNOOPI) instrument.

Remote Sensing↗

NASA NTRSDate not supplied

Detection and Localization of a Fold, Twist, and Overlaps within Tow-Steered Composite Panels During Autoclave Cure

Because of the anisotropic properties of carbon fiber reinforced polymer (CRFP) composites, novel layup architectures, such as tow-steering, can be used to tailor mechanical properties of the composite structure to the loading condition during use. In this work, a tow-steered composite panel was de-signed, laid up using the Integrated Structural Assembly of Advanced Com-posites (ISAAC) automated fiber placement (AFP) machine located at the NASA Langley Research Center (LaRC), and cured while simultaneously be-ing inspected using an ultrasonic inspection system operating inside the auto-clave. The composite panel contained overlaps that are intrinsic to the tow-steered design and had intentionally introduced layup defects including folds, wrinkles, splices, tow twists, foreign object debris (FOD), gaps, and additional overlaps. The inspections during the cure cycle focused on the ar-ea within the laminate containing a fold, a twist, and intrinsic overlaps. The ultrasonic inspections performed during the cure cycle were analyzed and compared to post-cure ultrasonic inspections of the entire laminate.

Composites↗

NASA NTRSDate not supplied

Experimental Setup for Mechanically Testing Subscale Triangular, Rollable, and Collapsible Deployable Composite Booms

High-strain composite deployable space structures are used for space infrastructure and science applications such as solar array supports, antennae, camera masts, and lightweight structures supporting solar sailing propulsion ele-ments. Triangular, Rollable, and Collapsible (TRAC) deployable composite booms are one example of a high-strain composite deployable structure and were studied using novel experimental test and characterization methods developed under the Gravity Offloading and Analysis of Long Imperfection-sensitive Ele-ments (GOALIE) project. In the present work, a subscale 7-m-long TRAC boom was suspended vertically to orient gravity along the length of the boom. By ori-enting vertically, highly nonlinear and unstable behavior often encountered dur-ing horizontally oriented gravity offload testing of similar structures was reduced. Pretest analytical predictions of TRAC booms indicated three unique failure modes, loads, and locations for three unique loading cases of in-plane bending, out-of-plane bending, and axial compression. To investigate the predicted behav-ior, an experimental test was set up to impart mechanical loads to a subscale TRAC boom. The experimental setup, loading cases, and instrumentation used to characterize the mechanical response of a subscale TRAC boom are described in this paper.

High-strain composites↗

NASA NTRSDate not supplied

Crowdsourcing for Innovative Personal Protection Technology

Personal protective equipment (PPE) plays a vital role in safeguarding workers from workplace hazards and minimizing exposure to harmful substances or conditions. To meet the changing needs and challenges faced by workers in various industries, PPE is continuously evolving. As new technologies emerge, advances in materials, design, and functionality contribute to PPE improvements. By incorporating personal protective technology (PPT) into traditional PPE, worker safety and well-being can be further enhanced. Crowdsourcing can harness a wide range of perspectives and expertise to identify novel technologies, materials, designs, or applications that can revolutionize PPE and improve worker protection. Partnering with the National Aeronautics and Space Administration (NASA) Center for Center of Excellence for Collaborative Innovation (CoECI), the National Institute for Occupational Safety and Health (NIOSH) National Personal Protection Technology Laboratory (NPPTL) launched three crowdsourcing challenges. These challenges aimed to promote innovation in several PPE areas: protective clothing, counterfeit respirators, and respirator fit. Preliminary results produced promising technologies and approaches promoting improved awareness, comfort, adaptability, and effectiveness against workplace hazards.

crowdsourcing↗

NASA NTRSDate not supplied

Web-based Visualization and Analytics of Petascale Data: Equity as a Tide that Lifts All Boats

Scientists generate petabytes of data daily to help uncover environmental trends or behaviors that are hard to predict. For example, understanding climate simulations based on the long-term average of temperature, precipitation, and other environmental variables is essential to predicting and establishing root causes of future undesirable scenarios and assessing possible mitigation strategies. While supercomputer centers provide a powerful infrastructure for generating petabytes of simulation output, accessing and analyzing these datasets interactively remains challenging on multiple fronts. This paper presents an approach to managing, visualizing, and analyzing petabytes of data within a browser on equipment ranging from the top NASA supercomputer to commodity hardware like a laptop. Our novel data fabric abstraction layer allows user-friendly querying of scientific information while hid-ing the complexities of dealing with file systems or cloud services.We also optimize network utilization while streaming from petas-cale repositories through state-of-the-art progressive compression algorithms. Based on this abstraction, we provide customizable dashboards that can be accessed from any device with any inter-net connection, enabling interactive visual analysis of vast amounts of data to a wide range of users - from top scientists with access to leadership-class computing environments to undergraduate students of disadvantaged backgrounds from minority-serving institutions. We focus on NASA’s use of petascale climate datasets as an example of particular societal impact and, therefore, a case where achieving equity in science participation is critical. We validate our approach by improving the ability of climate scientists to visually explore their data via two fully interactive dashboards. We further validate our approach by deploying the dashboards and simplified training materials in the classroom at a minority-serving institution.These dashboards, released in simplified form to the general public, contribute significantly to a broader push to democratize the access and use of climate data.

Data visualization↗

NASA NTRSDate not supplied

Design of a Thrust Vector Servoelastic Filter for SLS Block 2 Booster Thrust Vector Control System

This paper presents a method to improve the thrust vector servoelastic (TVSE) response of a launch vehicle. TVSE is the coupling between the Thrust Vector Control (TVC) system nozzle dynamics and the vehicle flexible modes. A poorly phased TVC response, i.e. in phase with the structural velocity, can lead to instability of the flexible modes due to the energy injection from the thrust. For large boosters with heavy nozzles, TVSE is more likely to cause instability. This instability is part of the plant dynamics and may not be readily detected by the flight control system. In this paper, TVSE is treated as a disturbance rejection problem with the inertial force of the flexible motion viewed as an external disturbance to the TVC actuator control system. By effectively rejecting this disturbance, the engine can be decoupled from the flexible dynamics thus improving TVSE stability. The actuator disturbance transfer function is modified by inserting a filter into the servo-loop control system. The filter aims to reduce the magnitude and introduce phase lead of the disturbance transfer function over the TVSE sensitive frequency range while maintaining adequate stability margins of the actuator control system. A prefilter is also designed to improve command tracking performance. The filter and prefilter resulting from this method are usually of low order and can be included to an existing actuator controller if the controller is programmable. This method was demonstrated for a hydraulic Simplex actuator model. Its applications to the Space Launch System (SLS) Block 1 and Block 2 TVC actuator are also described. The Block 2 actuator controller was modified based on the results of this method. The tradeoff between TVSE stability and the servo-loop stability can be balanced by adjusting the amount of phase lead introduced by the TVSE filter. This method provides a useful way to solve the TVSE instability issue without costly and time-consuming hardware solutions. This method is based on the basic control principles of loop shaping and disturbance rejection and has been proven to be effective under proper circumstances.

Thrust vector control↗

NASA NTRSDate not supplied

Detection and Localization of a Fold, Twist, and Overlaps within Tow-Steered Composite Panels During Autoclave Cure

Because of the anisotropic properties of carbon fiber reinforced polymer (CRFP) composites, novel layup architectures, such as tow-steering, can be used to tailor mechanical properties of the composite structure to the loading condition during use. In this work, a tow-steered composite panel was de-signed, laid up using the Integrated Structural Assembly of Advanced Com-posites (ISAAC) automated fiber placement (AFP) machine located at the NASA Langley Research Center (LaRC), and cured while simultaneously be-ing inspected using an ultrasonic inspection system operating inside the auto-clave. The composite panel contained overlaps that are intrinsic to the tow-steered design and had intentionally introduced layup defects including folds, wrinkles, splices, tow twists, foreign object debris (FOD), gaps, and additional overlaps. The inspections during the cure cycle focused on the ar-ea within the laminate containing a fold, a twist, and intrinsic overlaps. The ultrasonic inspections performed during the cure cycle were analyzed and compared to post-cure ultrasonic inspections of the entire laminate.

Composites↗

NASA NTRSDate not supplied

Towards Surrogate Modeling of Subgrid Turbulent Transport for 3D Radiative Hydrodynamic Simulations of the Quiet Sun

In this work, we investigate the use of deep learn-ing techniques as surrogate models, to enhance the estimationof effects of subgrid turbulent transport for 3D radiatuve hy-drodynamic simulations of the quiet Sun. We develop two dis-tinct 3D Convolutional Neural Networks (3DCNNs) to capturespatio-temporal dependencies in 3D velocity fields, leveragingdifferent activation functions and architectural designs. Thesemodels integrate both averaged velocity vector components andscalar features such as plasma density to enhance predictionaccuracy. Additionally, a Multilayer Perceptron (MLP) modelis employed to approximate complex nonlinear relationships,offering a comparison in performance between convolutionaland fully connected architectures. Logarithmic transformationis applied to the targets to handle heavily skewed data, im-proving model performance. All models are compared againsta physics-based Gradient Model. Results show that the 3DCNNmodels excel at approximating Reynolds stress tensors, makingthem a candidate for assisting in producing reduced resolutionsimulations, and thereby reducing computational overheadwhile maintaining higher accuracy than the baseline. Thesefindings demonstrate the potential of deep learning, particu-larly CNNs, to advance scalable and accurate simulations ofsolar dynamics, offering a promising alternative to traditionalturbulence models.

Heliophysics↗

NASA NTRSDate not supplied

Improving Kinetic Consistency Across Elastic Model Transitions With Quadratic Inequality Constrained Weighted Least Squares (WLSQI)

Flexible body modeling presents a large challenge in the development of simulations to aid in design of flight control systems for launch and landing vehicles. Typically, the flexible body model is not a single continuous model but are rather discrete sets of Linear Time Invariant (LTI) Finite Element Models (FEM) incremented by propellant levels. This introduces the problem of smoothly transitioning modal and physical states of the vehicle when switching from one FEM to the next. This paper introduces a new approach to optimally transition flexible body states with weighted least squares, building off previous methods.

Convex Optimization↗

NASA NTRSDate not supplied

Improving Kinetic Consistency Across Elastic Model Transitions With Quadratic Inequality Constrained Weighted Least Squares (WLSQI)

Flexible body modeling presents a large challenge in the development of simulations to aid in design of flight control systems for launch and landing vehicles. Typically, the flexible body model is not a single continuous model but are rather discrete sets of Linear Time Invariant (LTI) Finite Element Models (FEM) incremented by propellant levels. This introduces the problem of smoothly transitioning modal and physical states of the vehicle when switching from one FEM to the next. This paper introduces a new approach to optimally transition flexible body states with weighted least squares, building off previous methods.

GN&C↗

NASA NTRSDate not supplied

Camera Calibration and Alignment Metrology at Johnson Space Center’s Electro-Optics Laboratory

It is increasingly common to see spacecraft equipped with cameras for the purpose of navigation. Images are either sent to Earth or processed autonomously on-board to provide information about the vehicle’s position, velocity, and/or attitude. These can be images of stars or celestial bodies for absolute navigation, or images of another spacecraft for relative navigation. While monocular cameras do not provide range information, the images they capture can be processed to determine bearing vectors to target objects within the camera’s field of view. For a camera to be effective in navigation, it must be carefully calibrated and aligned. This involves accurately modeling the optical effects that govern the projection of line-of-sight directions onto the camera’s pixels and determining the camera’s orientation relative to the spacecraft’s reference frame. Engineers at Johnson Space Center’s Electro-Optics Lab regularly perform camera inspection, calibration, and alignment metrology. This was done for the Orion Optical Navigation (OpNav) Camera, the Orion Docking Camera (DCAM), and for numerous cameras belonging to commercial partners. The nature of optical navigation means that cameras must be well-calibrated and their attitude well understood to provide high accuracy bearing measurements to the navigation filter. The stringent accuracy requirements for Orion could not have been met using traditional checkerboard camera calibration or by simply relying on design drawings. This paper details the hardware, software, techniques, and algorithms used by the EOL team to achieve this level of accuracy.

Paul D Mckee↗

NASA NTRSDate not supplied

Camera Calibration and Alignment Metrology at Johnson Space Center’s Electro-Optics Laboratory

It is increasingly common to see spacecraft equipped with cameras for the purpose of navigation. Images are either sent to Earth or processed autonomously on-board to provide information about the vehicle’s position, velocity, and/or attitude. These can be images of stars or celestial bodies for absolute navigation, or images of another spacecraft for relative navigation. While monocular cameras do not provide range information, the images they capture can be processed to determine bearing vectors to target objects within the camera’s field of view. For a camera to be effective in navigation, it must be carefully calibrated and aligned. This involves accurately modeling the optical effects that govern the projection of line-of-sight directions onto the camera’s pixels and determining the camera’s orientation relative to the spacecraft’s reference frame. Engineers at Johnson Space Center’s Electro-Optics Lab regularly perform camera inspection, calibration, and alignment metrology. This was done for the Orion Optical Navigation (OpNav) Camera, the Orion Docking Camera (DCAM), and for numerous cameras belonging to commercial partners. The nature of optical navigation means that cameras must be well-calibrated and their attitude well understood to provide high accuracy bearing measurements to the navigation filter. The stringent accuracy requirements for Orion could not have been met using traditional checkerboard camera calibration or by simply relying on design drawings. This paper details the hardware, software, techniques, and algorithms used by the EOL team to achieve this level of accuracy.

Paul McKee↗

NASA NTRS2026

Swamp Works Regolith Compaction Technologies

While the level of compaction below the lunar surface increases quickly after only a few cm of depth, in many cases during a construction mission there will be a need to excavate and transport regolith to a new location for cut-and-fill or horizontal construction of structures such as berms. In these cases to achieve high levels of bulk density, compaction must be per-formed. Additionally, in some cases surface technolo-gies such as systems that sinter/melt the surface may desire the maximum possible compaction at the sur-face to improve melting/heating performance and the final material strength properties. Kennedy Space Center’s (KSC) Swamp Works has developed two means of compaction, lunar and mar-tian compaction. Planetary Autonomous Compaction Technology (PACT) which is part of the Multifunction End Effector for Regolith Compaction Acquisition and Transfer (MEERCAT [1]) robotic arm end effector system’s capabilities and the Site Preparation Tooling for Operations on Mobility Platforms (STOMP [2]) vibratory roller compactor. PACT on MEERCAT has been demonstrated to a TRL 5 and STOMP to a TRL 4 in ambient testing. The results of PACT on MEERCAT and STOMP testing will be shared with results for various simulants including BP-1, ICN-LHT-1G (aka CSM-LHT-1G), RDW-LHT-1GH (a simulant developed for the Mason Tipping Point to match characteristics of ICN-LHT-1G), and Exolith LHS-1E. This will also include discus-sions on methods used to verify relative density before and after compaction and means to verify density effects below depth. To calculate relative density, maximum and minimum densities for simulants were taken from literature [3] [4] [5] and additional lab test-ing (publication in work).

vibration↗

DOE OSTI2020

Production processing and workflow management software evaluation in the DUNE collaboration

The Deep Underground Neutrino Experiment (DUNE) will be theworld’s foremost neutrino detector when it begins taking data in the mid-2020s.Two prototype detectors, collectively known as ProtoDUNE, have begun tak-ing data at CERN and have accumulated over 3 PB of raw and reconstructeddata since September 2018. Particle interaction within liquid argon time projec-tion chambers are challenging to reconstruct, and the collaboration has set upa dedicated Production Processing group to perform centralized reconstructionof the large ProtoDUNE datasets as well as to generate large-scale Monte Carlosimulation. Part of the production infrastructure includes workflow manage-ment software and monitoring tools that are necessary to eciently submit andmonitor the large and diverse set of jobs needed to meet the experiment’s goals.We will give a brief overview of DUNE and ProtoDUNE, describe the varioustypes of jobs within the Production Processing group’s purview, and discuss thesoftware and workflow management strategies are currently in place to meetexisting demand. We will conclude with a description of our requirements in aworkflow management software solution and our planned evaluation process.

Herner, Kenneth R.↗

DOE OSTI2020

BISON capability and validation for U3Si2, Cr2O3-doped UO2, FeCrAl, and Cr-coated Zircaloy ATF concepts

Development, implementation, and validation of material and behavior models for accident tolerant fuel (ATF) concepts in the BISON fuel performance code began in 2014 in response to the events that occurred at the Fukushima Daichii nuclear power plant in March 2011. Early on, the focus was on U3Si2 fuel and FeCrAl cladding as part of a high-impact problem through the Nuclear Energy and Advanced Model- ing Simulation program [1]. Then, developments for Cr2O3- doped UO2 fuel, as well as SiC-SiC and Cr-coated Zircaloy cladding began based upon industry interests. Near the end of fiscal year 2018 the Consortium for Advanced Simulation of Light Water Reactors took over further Accident Tolerant Fuel (ATF) work in BISON in support of Nuclear Regulatory Commission (NRC) engagement. Discussions with the NRC clarified their list of priority fuel and cladding concepts, which included Cr2O3-doped UO2 and U3Si2 fuels, as well as Cr-coated Zircaloy and FeCrAl claddings. Further, reports similar in form to NUREG/CR-7024 [2] that was developed for traditional light water reactor (LWR) materials, UO2 fuel with Zircaloy claddings were created for the priority fuel and cladding concepts. In this paper select details from the reports entitled "ATF material model development and validation for priority fuel concepts" [3] and "ATF material model development and validation for priority cladding concepts" [4] are presented. First, a brief overview of the available models and their associated uncertainty are provided for the priority fuel and cladding concepts. Then, for the concepts with experimental data, comparisons between simulation and experiment are shown taking into account forward uncertainty quantification (UQ) techniques. For the concepts without publicly available experimental data, parametric studies incorporating forward UQ are completed to verify claims made about the materials’ behavior.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2020

OpenCGRA: An Open-Source Unified Framework for Modeling,Testing, and Evaluating CGRAs

Coarse-grained reconfigurable arrays (CGRAs),loosely defined as arrays of functional units (e.g, adder, sub-tractor, multiplier, divider, or larger multi-operation units, butsmaller than a general-purpose core) interconnected through aNetwork-on-Chip, provide higher flexibility than domain-specificASIC accelerators while offering increased hardware efficiencywith respect to fine-grained reconfigurable devices, such as FieldProgrammable Gate Arrays (FPGAs). The fast evolving fieldsof machine learning and edge computing, which are seeing acontinuous flow of novel algorithms and larger models, makeCGRAs ideal target architectures to allow domain specializationwithout loosing too much generality. They also generally offerquicker and more effective reconfigurability than FPGAs, po-tentially allowing adaptation during actual algorithm execution,and implement a dataflow programming paradigm that adaptswell to these emerging workloads. Designing and generating aCGRA, however, still requires to define the type and number ofthe specific functional units, implement their interconnect andthe network topology, and perform its simulation and validation,given a variety of workloads of interest.In this paper, we propose OpenCGRA, a Python-based unifiedframework that integrates generation, modeling, testing and eval-uation for CGRAs. OpenCGRA is the first open-source integratedframework able to support the full top-to-bottom design flow forspecializing and implementing CGRAs: modeling at different ab-straction levels (functional level, cycle level, register-transfer level),generation, simulation, testing at different granularities (unit test-ing, integration testing, property-based testing), and characteriza-tion (area, power, and timing). OpenCGRAs will be made availableon GitHub.

CGRA, synthesis↗

DOE OSTI2021

Containerization in ATLAS Software Development and Data Production

The ATLAS experiment's software production and distribution on the grid benefits from a semi-automated infrastructure that provides up-to-date information about software usability and availability through the CVMFS dis-tribution service for all relevant systems. The software development process uses a Continuous Integration pipeline involving testing, validation, packag-ing and installation steps. For opportunistic sites that can not access CVMFS, containerized releases are needed. These standalone containers are currently created manually to support Monte-Carlo data production at such sites. In this paper we will describe an automated procedure for the containerization of AT-LAS software releases in the existing software development infrastructure, its motivation, integration and testing in the distributed computing system.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2021

DUNE Software and Computing Challenges

The DUNE experiment will begin running in the late 2020's. The goals of the experiment include 1) studying neutrino oscillations using a beam of neutrinos from Fermilab in Illinois to the Sanford Underground Research Facility, 2) studying astrophysical neutrino sources and rare processes and 3) understanding the physics of neutrino interactions in matter. The DUNE Far Detector, consisting of four 17 kt LArTPC modules, will produce "events" rang-ing in size from 6 GBs to more than 100 TBs, posing unique challenges for DUNE software and computing. The data processing algorithms, particularly for raw data, drive the requirements for the future DUNE software framework documented here.

97 MATHEMATICS AND COMPUTING↗