Search NASA⌕ Search

SEARCH · Search NASA

Results for “Image Comparison”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

The performance of additively manufactured Haynes 282 in supercritical CO 2

The use of supercritical carbon dioxide (sCO 2 ) as a working fluid is garnering interest in next generation power production systems due to the possibility of increased operational efficiencies and lower associated costs. Its implementation requires alloys with excellent high temperature strength and corrosion resistance, which makes Haynes 282® (H282) a suitable candidate. With increasing adoption of additive manufacturing (AM) in the energy industry, there is a need to investigate long-term sCO2 exposure on AM produced materials. Additively manufactured H282 (AM-H282) samples built using laser powder bed fusion in two different orientations were analyzed through imaging, gravimetric analysis, and room-temperature tensile testing before and after 1000-h exposure to CO 2 at 750 °C and 20 MPa. Performed imaging included observation of the sample surfaces and of the material bulk (cross sections) through means of Scanning Electron Microscopy (SEM) and optical microscopy. In comparison to wrought H282, it was found that the exposed material exhibited a similar Cr 2 O 3 oxide protective layer about 2 μm in thickness with additional top-surface TiO 2 oxide and carbon-rich precipitates. It was also similarly observed that internal oxidation was present but limited to a depth of 20 μm, and a 1–3 μm γ’ denuded region appeared to surround all internal and surface oxidation. Thermal aging effects were noted with the precipitation of needle-like structures in the γ/γ’ matrix and a coarsening of the γ’ precipitates from 28 nm to 73 nm. Mass measurements analyzing oxide precipitation revealed a larger increase compared to wrought, representing an approximate 20% difference. Tensile testing results showed similar behavior to wrought with a slight increase in yield strength and a large reduction in elongation in the exposed samples.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Beyond Optimization: Exploring Novelty Discovery in Autonomous Experiments

Autonomous experiments (AEs) are transforming how scientific research is conducted by integrating artificial intelligence with automated experimental platforms. Current AEs primarily focus on the optimization of a predefined target; while accelerating this goal, such an approach limits the discovery of unexpected or unknown physical phenomena. Here, we introduce a novel framework, INS 2 ANE (Integrated Novelty Score−Strategic Autonomous Non-Smooth Exploration), to enhance the discovery of novel phenomena in autonomous microscopy experimentation. Our method integrates two key components: (1) a novelty scoring system that evaluates the uniqueness of experimental results and (2) a strategic sampling mechanism that promotes exploration of under-sampled regions even if they appear less promising by conventional criteria. We validate this approach on a preacquired data set with a known ground truth comprising of image−spectral pairs. We further implement the process on autonomous scanning probe microscopy experiments. INS 2 ANE significantly increases the diversity of explored phenomena in comparison to conventional optimization routines, enhancing the likelihood of discovering previously unobserved phenomena. These results demonstrate the potential for autonomous microscopy experiments to enhance the scientific discovery by navigating complex experimental spaces to uncover novel phenomena.

Materials↗
DOE OSTI2020

Millimeter wave traveling wave tubes for the 21st Century

Traveling wave tubes are rapidly evolving to provide unprecedented power level in comparison to solid state devices in the millimeter waves region of the spectrum (80–300 GHz) thus enabling a wide range of applications. Wireless communications, imaging, plasma diagnostics, healthcare and many others will gain substantial features if high power at millimeter waves would be available from compact sources. The development of fabrication technologies is proving crucial for introducing new topologies and structures for millimeter wave vacuum electronic devices, compatible with the dimensions dictated by the short wavelength that poses substantial manufacturing challenges due to tight tolerances. This review paper will provide an overview of the principles, evolution and state of the art of one of the most widely utilized vacuum electronic device, the traveling wave tube (TWT). The wide band, high gain features of TWTs make those devices the most promising solutions for high power at millimeter waves and THz frequencies.

42 ENGINEERING↗
DOE OSTI2021

Accelerating LHC phenomenology with analytic one-loop amplitudes: A C++ interface to MCFM

Abstract The evaluation of one-loop matrix elements is one of the main bottlenecks in precision calculations for the high-luminosity phase of the Large Hadron Collider. To alleviate this problem, a new C++ interface to the "Image missing" <#comment/> parton-level Monte Carlo is introduced, giving access to an extensive library of analytic results for one-loop amplitudes. Timing comparisons are presented for a large set of Standard Model processes. These are relevant for high-statistics event simulation in the context of experimental analyses and precision fixed-order computations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Bridging Land-Surface Fluxes and Aerosol Concentrations to Triggering Convective Rainfall

During the period August 24-28, 2016, a delayed component the GO-Amazon Project, we launched nine altitude-controlled free balloons (CMET). Smaller than typical rawinsondes, CMET are equipped with altitude control, global communication via Iridium satellite, and aspirated sensors. The aims of our effort were to examine the interactions among convective boundary layer and dual river breeze circulations near the confluence of the Tapajos and Amazon Rivers in the eastern Basin. The week-long field campaign was timed to examine the reestablishment of the breeze circulations shortly after the passage of a strong instability line on August 22. Nine CMET were launched at the Curua-Una hydroelectric dam (2.8S; 54.3W), timed to encounter the Tapajos river breeze front by late afternoon. Soundings were made to establish the thickness of interface between the easterly trade and westerly Tapajos breeze circulation. Careful use of sounding strategies allowed these free balloons to track along the northerly channeled flow in the lowest 300 m above the River. Following the river encounter, balloons tracked to the west, sounding to describe the diurnal course of boundary layer in the forest west of the Tapajos River. The longest flight traveled more than 770 km over three days and twice rested overnight in the rain forest canopy. Ancillary data from surface climate and flux stations as well as the Santarem radiosonde, satellite images will be used to illustrate how the breeze circulations are seen near the surface and how they were disrupted by larger-scale events. Comparisons with HYSPLIT trajectories illustrate how sensitive real trajectories are to the refraction that the encounter with the breeze effects. A second effort was intensive analyses of data from the eddy flux tower at the Tapajós National Forest near Santarém Pará Brazil, with special emphasis on the role of clouds and canopy presence on light absorbance and photosynthetic activity.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Evidence of Recent Material Transport within a Binary Asteroid System

Images acquired by the Double Asteroid Redirection Test (DART) before its impact into Dimorphos—the moon of the Didymos binary asteroid system—unexpectedly reveal a set of discontinuous rays spanning the imaged surface. These albedo features are visible only after correcting for lighting differences, which normalize the effects of the pervasive boulders that cover the surface. Comparison to physical experiments and numerical simulations shows that these bright, fan-shaped albedo features are consistent with the aftermath of a low-velocity impact into a field of boulders and provide our first direct evidence for the transfer of material in a binary asteroid system due to the shedding material from radiative torques. Parts of these and possible additional albedo markings from the reentry of boulders after the DART impact may be visible to the Hera mission when it explores the post-DART Didymos system.

Astronomy and AstroPhysics↗
DOE OSTI2025

Mapping the gas density with the kinematic Sunyaev-Zel’dovich and patchy screening effects: A self-consistent comparison

The secondary anisotropies of the cosmic microwave background (CMB) provide a wealth of astrophysical and cosmological information. Pairing measurements of the CMB temperature map obtained by DR5 of the Atacama Cosmology Telescope (ACT) with the imaging survey conducted by the Dark Energy Spectroscopic Instrument for the purposes of target selection, DECaLS DR9, we investigate two effects that are sensitive to the gas density 𝜏: kinematic Sunyaev-Zel’dovich (kSZ) and patchy screening or anisotropic screening (resulting from the Thomson scattering of CMB photons away from the line-of-sight by free electrons). In particular, we measure the stacked profiles of the gas density around luminous red galaxies (LRGs) at a mean redshift of 𝑧 ≈ 0.7. We detect the kSZ signal at 7.2⁢𝜎, and we find a signal at ∼ 4.1⁢𝜎 for the patchy screening estimator, which is in excess relative to the kSZ signal. We attribute this excess to contamination from CMB lensing. Here, we demonstrate the effect of lensing using 𝑁-body simulations, and we show that the screening signal is dominated by it. Accounting for lensing, our measurement places a 95% upper bound on the optical depth of the Extended DESI LRG sample of 𝜏 < 2.5 10 −4 for a mean value of the sample of 𝜏 ≈ 1.6 10 −4 . Furthermore, via hydro simulations, we show that the underlying optical depth signal measured by both effects (after removing the CMB lensing contribution) is in perfect agreement when adopting either a compensated aperture photometry (CAP) filter or a high-pass filter. Consistent with previous measurements, we see evidence for excess baryonic feedback around DESI LRGs in the patchy screening measurement. In the future, when both effects can be measured with high signal-to-noise, one can measure the amplitude ratio between them, which is proportional to the root-mean-square velocity of the host halo sample, and even place constraints on velocity-sensitive models such as modified gravity and phantom dark energy.

Astrophysical & cosmological simulations↗
DOE OSTI2023

Energy dissipation efficiency in the CP43 assembly intermediate complex of photosystem II

Photosystem II in oxygenic organisms is a large membrane bound rapidly turning over pigment protein complex. During its biogenesis, multiple assembly intermediates are formed, including the CP43-preassembly complex (pCP43). Here, to understand the energy transfer dynamics in pCP43, we first engineered a His-tagged version of the CP43 in a CP47-less strain of the cyanobacterium Synechocystis 6803. Isolated pCP43 from this engineered strain was subjected to advanced spectroscopic analysis to evaluate its excitation energy dissipation characteristics. These included measurements of steady-state absorption and fluorescence emission spectra for which correlation was tested with Stepanov relation. Comparison of fluorescence excitation and absorptance spectra determined that efficiency of energy transfer from β-carotene to chlorophyll a is 39 %. Time-resolved fluorescence images of pCP43-bound Chl a were recorded on streak camera, and fluorescence decay dynamics were evaluated with global fitting. These demonstrated that the decay kinetics strongly depends on temperature and buffer used to disperse the protein sample and fluorescence decay lifetime was estimated in 3.2–5.7 ns time range, depending on conditions. The pCP43 complex was also investigated with femtosecond and nanosecond time-resolved absorption spectroscopy upon excitation of Chl a and β-carotene to reveal pathways of singlet excitation relaxation/decay, Chl a triplet dynamics and Chl a → β-carotene triplet state sensitization process. The latter demonstrated that Chl a triplet in the pCP43 complex is not efficiently quenched by carotenoids. Finally, detailed kinetic analysis of the rise of the population of β-carotene triplets determined that the time constant of the carotenoid triplet sensitization is 40 ns.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Evaluation of Desiccation Behavior in Basalt Microfiber–Reinforced Bentonite Clay for Geological Repositories of Nuclear Spent Fuel Using Digital Image Correlation

ABSTRACT Secure storage of nuclear spent fuel (NSF) is of great concern for protecting public health and safety. The preferred long-term solution is underground containment in geological repositories, where one or more engineered barrier materials (EBM) encapsulate the NSF and separate it from the natural rock. Bentonite clay is commonly used as an EBM due to its many advantageous properties including low hydraulic conductivity, which ensures limitation of water infiltration to the system and the subsequent risk of corrosion in NSF canisters. However, bentonite clay subjected to heating from nuclear decay may form desiccation cracking. This study conducted disk-shaped free shrinkage tests and ring-shaped restrained shrinkage tests of bentonite clay samples reinforced with basalt microfibers. Digital image correlation was used as a noncontact full-field displacement measurement to track the time-evolving shrinkage and desiccation cracking phenomena and make quantified comparisons between plain bentonite and bentonite with varying contents of basalt microfibers (i.e., 0.0, 0.5, 1.0, and 1.5 % wt.). Results indicate that plain bentonite and basalt microfiber-reinforced samples showed similar free shrinkage behavior, while desiccation cracking behavior was significantly altered by adding basalt microfibers. Microfiber reinforcement effectively reduced major cracks through a “crack-bridging” effect while causing minor cracks to initiate earlier and at higher moisture contents than plain bentonite. Results infer that reinforcing plain bentonite with inorganic microfibers can potentially control desiccation cracking, leading to safer and improved nuclear waste management.

Materials Science↗
DOE OSTI2026

Cooperative Automated Cohort Driving on Connected Infrastructure, Arterial Roadways, and Highways: Final Project Demonstration and System-of-Systems Model Correlation

This project seeks to synergize vehicle automated driving and connectivity data to improve mobility and energy efficiency of groups of mixed vehicles operating in close proximity (vehicle cohort) on various infrastructure. A custom cellular communication network links vehicles operating as a cohort with infrastructure to a centralized system-of-systems digital twin with an AI-based optimal behavior planner. The data contained in this set are from final testing and technology demonstrations to U.S. Department of Energy staff at the American Center for Mobility. The data contain single-lane, single-light scenarios; multi-lane, multi-light arterial scenarios; and limited-access highway scenarios. All test cases were derived from simulations and replicated on the test track. The project employed two and four light-duty vehicles with connectivity and drive automation for the testing. The baseline scenario without connectivity was run under the control of the system-of-systems centralized planner but operating each vehicle with an intelligent driver model controlling the velocity, lane utilization, and vehicle gap. This was to ensure the highest compatibility with the simulation in terms of dynamic behavior. The connected cohort case utilized AI optimization to perform coordinated and cooperative control for energy, as well as safe, comfortable behavior for the cohort. The dataset is appropriately named with unconnected and connected designations, with comparisons sharing the same run index number. The included PowerPoint and PDF files describe the test setup and provide an overview of results from the project. ![image](de-EE0009209_March_2023_Data_Arterial_Scenario_Results.png)

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

An Analysis of the Statistics and Systematics of Limb Anomaly Detections in HST/STIS Transit Images of Europa

Several recent studies derived the existence of plumes on Jupiter’s moon Europa. The only technique that provided multiple detections is the far-ultraviolet imaging observations of Europa in transit of Jupiter taken by the Space Telescope Imaging Spectrograph (STIS) on the Hubble Space Telescope (HST). In this study, we reanalyze the three HST/STIS transit images in which Sparks et al. identified limb anomalies as evidence for Europa’s plume activity. After reproducing the results of Sparks et al., we find that positive outliers are similarly present in the images as the negative outliers that were attributed to plume absorption. A physical explanation for the positive outliers is missing. We then investigate the systematic uncertainties and statistics in the images and identify two factors that are crucial when searching for anomalies around the limb. One factor is the alignment between the actual and assumed locations of Europa on the detector. A misalignment introduces distorted statistics, most strongly affecting the limb above the darker trailing hemisphere where the plumes were detected. The second factor is a discrepancy between the observation and the model used for comparison, adding uncertainty in the statistics. When accounting for these two factors, the limb minima (and maxima) are consistent with random statistical occurrence in a sample size given by the number of pixels in the analyzed limb region. The plume candidate features in the three analyzed images can be explained by purely statistical fluctuations and do not provide evidence for absorption by plumes.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

On the impact of the galaxy window function on cosmological parameter estimation

One important source of systematics in galaxy redshift surveys comes from the estimation of the galaxy window function. Up until now, the impact of the uncertainty in estimating the galaxy window function on parameter inference has not been properly studied. In this paper, we show that the uncertainty and the bias in estimating the galaxy window function will be salient for ongoing and next-generation galaxy surveys using a simulation-based approach. With a specific case study of cross-correlating emission-line galaxies from the DESI Legacy Imaging Surveys and the Planck cosmic microwave background lensing map, we show that neural network-based regression approaches to modelling the window function are superior in comparison to linear regression-based models. Here, we additionally show that the definition of the galaxy overdensity estimator can impact the overall signal-to-noise of observed power spectra. Finally, we show that the additive biases coming from the window functions can significantly bias the modes of the inferred parameters and also degrade their precision. Thus, a careful understanding of the window functions will be essential to conduct cosmological experiments.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Protorheology

We all instinctively poke, bounce, scoop, and observe materials to understand rheological properties quickly. Yet, these observations are rarely analyzed quantitatively. To address this, here we introduce the paradigm of protorheology: approximate quantitative inference from simple observations. Several case studies demonstrate how protorheology is an inclusive entry to rheology for a broad range of practitioners and strengthens the confidence and interpretation of accurate laboratory measurements. We survey a range of creative tests according to which rheological phenomenon is revealed. Some new working equations are derived, and all working equations are summarized for convenient reference and comparison across different methods. Finally, this establishes a framework to enable increased use of photos, videos, and quantitative inference and to support the increasing interest in digital image analysis, inverse methods, and high-throughput characterization being applied to rheological properties.

42 ENGINEERING↗
DOE OSTI2020

Oxygen Reduction Reaction Activity of Nanocolumnar Platinum Thin Films by High Pressure Sputtering

Nanocolumnar platinum thin films (Pt-TFs) were produced by high pressure sputtering (HIPS) and investigated as oxygen reduction reaction electrocatalysts for polymer electrolyte membrane fuel cells. Conventional high-density Pt-TF prepared by low pressure sputtering was also studied for comparison. Pt-TFs were deposited on a microporous layer (MPL)-like surface composed of carbon particles to mimic catalyst-coated gas diffusion electrodes. Electron microscopy imaging revealed that HIPS Pt-TFs developed a cauliflower-like columnar microstructure, which originated from a shadowing effect during HIPS. This shadowing effect is enhanced on the rough surface of the MPL-like carbon that leads to the nano-cauliflower formation. With this approach, we also aimed to relate the catalyst performance obtained by benchtop tests directly to membrane electrode assembly test results. The electrochemically active surface area of Pt-TFs increased from 10 to 19 m 2 /g with increasing sputter pressure. Specific activity of conventional high-density and nanocolumnar films were similar at ~600 μA/cm 2 , which is likely due to their similar crystal grain sizes, >5 nm. On the other hand, mass-specific (MA) activity values increased from ~0.06 A/mgPt for conventional Pt-TF to ~0.13 A/mgPt for HIPS Pt-TFs, which is consistent with the columnar microstructure of HIPS films providing a better catalyst utilization compared to conventional Pt-TF.

08 HYDROGEN↗
DOE OSTI2021

The Encounter of the Parker Solar Probe and a Comet-like Object Near the Sun: Model Predictions and Measurements

The Parker Solar Probe (PSP) aims to explore the nascent solar wind close to the Sun. Meanwhile, PSP is also expected to encounter small objects like comets and asteroids. Here, we survey the ephemerides to find the chance of a recent encounter and then model the interaction between released dusty plasmas and solar wind plasmas. On 2019 September 2, a comet-like object, the 322P/Solar and Heliosphere Observatory, just passed its perihelion flying to a heliocentric distance of 0.12 au and swept by PSP at a relative distance as close as 0.025 au. We present the dynamics of the dust particles released from 322P, forming a curved dust tail. Along the path of PSP in the simulated inner heliosphere, the states of plasma and magnetic field are sampled and illustrated, with the magnetic field sequences from simulation results being compared directly with the in situ measurements from PSP. Through the comparison, we suggest that 322P might be at a deficient activity level releasing limited dusty plasmas on its way to becoming a "rock comet." We also present images of solar wind streamers as recorded by the Wide-field Imager for Solar Probe Plus, showing an indication of dust bombardment for the images superposed with messy trails. We observe from the Large Angle and Spectrometric Coronagraph that 322P was transiting from a dimming region to a relatively bright streamer during its perihelion passage, and perform a simulation to confirm that 322P was flying from relatively faster to slower solar wind streams, modifying the local plasma states of the streams.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Deep inference of simulated strong lenses in ground-based surveys

The large number of strong lenses discoverable in future astronomical surveys will likely enhance the value of strong gravitational lensing as a cosmic probe of dark energy and dark matter. However, leveraging the increased statistical power of such large samples will require further development of automated lens modeling techniques. We show that deep learning and simulation-based inference (SBI) methods produce informative and reliable estimates of parameter posteriors for strong lensing systems in ground-based surveys. We present the examination and comparison of two approaches to lens parameter estimation for strong galaxy-galaxy lenses — Neural Posterior Estimation (NPE) and Bayesian Neural Networks (BNNs). We perform inference on 1-, 5-, and 12-parameter lens models for ground-based imaging data that mimics the Dark Energy Survey (DES). We find that NPE outperforms BNNs, producing posterior distributions that are more accurate, precise, and well-calibrated for most parameters. For the 12-parameter NPE model, the calibration is consistently within <10% of optimal calibration for all parameters, while the BNN is rarely within 20% of optimal calibration for any of the parameters. Similarly, residuals for most of the parameters are smaller (by up to an order of magnitude) with the NPE model than the BNN model. This work takes important steps in the systematic comparison of methods for different levels of model complexity.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

Characterization of a Low-Temperature Plasma (LTP) Ambient Ionization Source Using Temporally Resolved Monochromatic Imaging Spectrometry

The low-temperature plasma (LTP) probe is a common plasma-based source used for ambient desorption–ionization mass spectrometry (MS). While the LTP probe has been characterized in detail with MS, relatively few studies have used optical spectroscopy. In this paper, two-dimensional (2D) imaging at selected wavelengths is used to visualize important species in the LTP plasma jet. First, 2D steady-state images of the LTP plume for N 2 + (391.2 nm), He I (706.5 nm), and N 2 (337.1 nm) emissions were recorded under selected plasma conditions. Second, time-resolved 2D emission maps of radiative species in the LTP plasma jet were recorded through the use of a 200 ns detection gate and varying gate delays with respect to the LTP trigger pulse. Emission from He I, N 2 + , and N 2 in the plasma jet region was found to show a transient behavior (often referred to as plasma bullets) lasting only a few microseconds. The N 2 + and He I maps were highly correlated in spatial and temporal structure. Further, emission from N 2 showed two maxima in time, one before and one after the maximum emission for N 2 + and He I, due to an initial electronic excitation wave and ion–electron recombination, respectively. Third, the interaction of the LTP probe with a sample substrate and an electrically grounded metallic needle was studied. Emission from a fluorophore on the sample substrate showed an initial photon-induced excitation from plasma-generated photons followed by electronic excitation by other plasma species. The presence of a grounded needle near the plasma jet significantly extended the plasma jet lifetime and also generated a long-lived corona discharge on the needle. The effect of LTP operating parameters on emission spectra was correlated with mass-spectral results including reagent-ion signals. Lastly, five movies provide a side-by-side comparison of the temporal behavior of emitting species and insights into the interactions of the emission clouds with a sample surface as well as an external needle. Temporally and spatially resolved imaging provided insights into important processes in the LTP plasma jet, which will help improve analyte ion sampling in LTP–MS.

Chan, George C. -Y.↗