Search NASA⌕ Search

SEARCH · Search NASA

Results for “Infiltration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Additive Manufacturing of C/C-SiC Ceramic Matrix Composites by Automated Fiber Placement of Continuous Fiber Tow in Polymer with Pyrolysis and Reactive Silicon Melt Infiltration

An additive manufacturing process for fabricating ceramic matrix composites has been developed based on the C/C-SiC system. Automated fiber placement of the continuous carbon fibers in a polyether ether ketone matrix was performed to consolidate the carbon fibers into a printed preform. Pyrolysis was performed to convert the polymer matrix to porous carbon, and then Si was introduced by reactive melt infiltration to convert a portion of the carbon matrix to silicon carbide. The densities and microstructures were characterized after each step during the processing, and the mechanical properties were measured. The C/C-SiC composites exhibited a porosity of 10–20%, characteristic flexural strength of 234.91 MPa, and Weibull modulus of 3.21. The composites displayed toughness via a significant displacement to failure.

36 MATERIALS SCIENCE↗

Two-Layer Variable Infiltration Capacity Land Surface Representation for General Circulation Models

A simple two-layer variable infiltration capacity (VIC-2L) land surface model suitable for incorporation in general circulation models (GCMs) is described. The model consists of a two-layer characterization of the soil within a GCM grid cell, and uses an aerodynamic representation of latent and sensible heat fluxes at the land surface. The effects of GCM spatial subgrid variability of soil moisture and a hydrologically realistic runoff mechanism are represented in the soil layers. The model was tested using long-term hydrologic and climatalogical data for Kings Creek, Kansas to estimate and validate the hydrological parameters. Surface flux data from three First International Satellite Land Surface Climatology Project Field Experiments (FIFE) intensive field compaigns in the summer and fall of 1987 in central Kansas, and from the Anglo-Brazilian Amazonian Climate Observation Study (ABRACOS) in Brazil were used to validate the mode-simulated surface energy fluxes and surface temperature.

GENERAL CIRCULATION MODELS↗

Modeling the Effect of Damage on the Electrical Resistivity of Melt-Infiltrated SiC/SiC Composites

Electrical resistivity (ER) measurements are a possible health monitoring technique for CMC components in future aerospace applications. In order to use ER measurements to detect and identify damage, it is necessary to understand how each specific damage state will affect the ER response. In this paper, finite element models are developed and applied to quantify the effect of specific damage states on the electrical resistivity response in a melt-infiltrated silicon carbide (SiC) fiber-reinforced silicon carbide composite. The electrical resistivity of several damage states are calculated by simulating the electric current flow through the damaged micro-structure. This is achieved by performing the numerical solution of the steady-state conservation of charge density equation. Numerical results reveal that cracking of the inter-tow matrix has the most profound effect on the composite electrical resistivity. Also, fiber/matrix debonding at matrix cracks in the 0° tows (tows aligned with the loading direction) may cause a significant increase in the electrical resistivity, but only if the fiber coating resistivity is 1000 Ω-cm or less. Cracks in the 90° tows and the crack opening displacement have very little effect on the composite electrical resistivity.

finite element analysis↗

Electrochemical characteristics of samaria-doped ceria infiltrated strontium-doped LaMnO3 cathodes with varied thickness for yttria-stabilized zirconia electrolytes

Samaria-doped ceria (SDC) infiltrated into strontium-doped LaMnO3 (LSM) cathodes with varied cathode thickness on yttria-stabilized zirconia (YSZ) were investigated via symmetrical cell, half cell, and full cell configurations. The results of the symmetrical cells showed that the interfacial polarization resistance (RP) decreased with increasing electrode thickness up to∼30m, and further increases in the thickness of the cathode did not cause significant variation of electrode performance. At 800 ◦C, the minimum RP was around 0.05cm2. The impedance spectra indicated that three main electrochemical processes existed, possibly corresponding to the oxygen ion incorporation, surface diffusion of oxygen species and oxygen adsorption and dissociation. The DC polarization on the half cells and characterization of the full cells also demonstrated a similar correlation between the electrode performance and the electrode thickness. The peak power densities of the single cells with the 10, 30, and 50-m thick electrodes were 0.63, 1.16 and 1.11Wcm−2, respectively. The exchange current densities under moderate polarization are calculated and possible rate-determining steps are discussed.

01 COAL, LIGNITE, AND PEAT↗

Technology Solutions Case Study: Impact of Infiltration and Ventilation on Measured Space Conditioning Energy and Moisture Levels in the Hot-Humid Climate

Air infiltration and ventilation in residential buildings is a very large part of the heating loads, but empirical data regarding the impact on space cooling has been lacking. Moreover, there has been little data on how building tightness might relate to building interior moisture levels in homes in a hot and humid climate. To address this need, BA-PIRC conducted research to assess the moisture and cooling load impacts of airtightness and mechanical ventilation in two identical laboratory homes in the hot-humid climate over the cooling season.

BA-PIRC↗

Use and misuse of large-density asymptotics in the reaction-infiltration instability

Analyzing the dissolution of rocks and other porous materials is simplified by the large dis-parity between mineral and reactant concentrations. In essence, the porosity remains frozen on the time scale of the reactant transport, which can then be treated as a quasi-stationary process. This conceptual idea can be derived mathematically using asymptotic methods, which show that the length scales in the system are, to a first approximation, independent of the ratio of reactant and mineral concentrations. Nevertheless, in a growing number of papers on dissolutional instabilities, the reactant-mineral concentration ratio has been incorrectly linked to the thickness of the dissolution front. In this paper we critically review the application of asymptotic methods to the reaction-infiltration instability. In particular, we discuss the limited validity of the thin-front or ‘‘Stefan’’ limit, where the interface between dissolved and undissolved mineral is sharp.

58 GEOSCIENCES↗

Processing and properties of SiC composites made via binder jet 3D printing and infiltration and pyrolysis of preceramic polymer

The effect of polymer infiltration and pyrolysis (PIP) cycles with polycarbosiloxane on the microstructure, air leak rate, and properties of SiC composites manufactured by a combination of binder jet 3D printing and PIP are reported. The density, Young’s modulus and flexural strength of disk-shaped components increased with the number of PIP cycles. In the case of density, it increased from 2.05 g/cm 3 in one PIP cycle to 2.33 g/cm 3 after three PIP cycles, while values of flexural strength and Young’s modulus at room temperature after three PIP cycles reached 66.8 ± 2.5 MPa and 69.5 ± 2.8 GPa, respectively. Conversely, the air leak rate was found to decrease with number of PIP cycles, and it reached a value of 4 mbar-liter/s after three cycles. The instantaneous coefficient of thermal expansion of the composite was found to change minimally with the number of PIP cycles and had a value of 4 ± 1.2 ppm/°C between 200°C and 1,000°C. Thermal conductivity was found to increase with number of PIP cycles and to decrease with temperature. For example, after 3 PIP cycles it was found to change from 6.72 ± 0.08 to 6.98 ± 0.08 W/mK at 25°C and 7.36 ± 0.08 to 7.96 ± 0.08 W/mK at 300°C. These values were lower than those of crystalline SiC because of the amorphous nature of the matrix and the presence of pores and cracks.

36 MATERIALS SCIENCE↗

Tumor-Infiltrating Lymphocytes in Breast Cancer. Association with Clinical and Pathological Parameters

In patients with primary resectable breast cancer, a positive correlation between the age and the count of CD16{sup +} lymphocytes and a negative correlation of this parameter with the number of regulatory CD4{sup +}CD25{sup +}CD127{sup —} cells and proliferative activity of Ki-67 tumor cells were revealed. Higher level of Ki-67 was associated with reduced number of effector lymphocytes (CD8{sup +} and CD16{sup +}) and elevated content of regulatory CD8{sup +}CD11b{sup —}CD28{sup —} T cells. The absence of expression of estrogen receptors was associated with reduced cytotoxic potential of CD8{sup +} T cell in comparison with ER{sup +} breast cancer. The percentage of CD8{sup +} lymphocytes (CD3{sup +}CD8{sup +} and CD8{sup +}CD11b{sup +}CD28{sup +}) among lymphocytes infiltrating the tumor was higher in PR{sup +} breast cancer than in PR{sup —} tumors. With increasing the tumor load, the number of lymphocytes expressing CD16 marker and their cytotoxic potential decreased.

60 APPLIED LIFE SCIENCES↗

Optimization of the Dy Content in Single Crystalline GdBCO Bulk Superconductors Fabricated in Air Via Top-Seeded Infiltration Growth Process

Single-crystalline bulk GdBa{sub 2}Cu{sub 3}O{sub 7−δ} (GdBCO) superconductors were fabricated with top-seeded infiltration-growth technique (TSIG) in air by adding the different amounts of Dy{sub 2}BaCuO{sub 5} (Dy-211) particles (5, 10, 15, 20, 25, 30, 35, and 40 wt%). All the samples show superconducting critical temperature at ∼93 K with sharp transition irrespective of the chemical composition. X-ray diffraction measurements confirmed that all the samples were single domain with high alignment. Microstructural studies through scanning electron microscopy showed that TSIG-processed GdBCO samples contained 211 phase particles of two different sizes, i.e., ∼2–4 and ∼10 μ m. The addition of Dy-211 phase particles led to a significant enhancement of critical current density (J{sub c}) at 77 K. GdBCO superconductor with the addition of 20 wt% of Dy-211 showed the highest J{sub c} of 45.5 kA/cm {sup 2} at 77 K and self field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Single-Grain Bulk YBa{sub 2}Cu{sub 3}O{sub y} Superconductors Grown by Infiltration Growth Process Utilizing the YbBa{sub 2}Cu{sub 3}O{sub y} + Liquid Phase as a Liquid Source

The top-seeded infiltration growth (IG) processed YBa{sub 2}Cu{sub 3}O{sub y} (Y-123) has several advantages compared to the same material produced by other melt process techniques. There is usually no shrinkage, a limited number of pores, and an uniform secondary phase particle dispersion in the Y-123 matrix. These characteristics of the IG process are very attractive for several industrial applications. In this paper, we produced a large single-grain Y-123 by IG and top seeded melt-growth process. Utilizing commercial YbBa{sub 2}Cu{sub 3}O{sub y} (Yb-123) and a homemade Y{sub 2}BaCuO{sub 5} (Y-211), we produced bulk YBa{sub 2}Cu{sub 3}O{sub y} samples using Yb-123 + liquid (1:1) as a liquid source. Four facet lines on the top surfaces of the as-grown samples indicated a uniform growth from the seed up to sample edges. Magnetization measurements by SQUID magnetometer showed a sharp superconducting transition with T{sub c},{sub onset} at 92.1 K. The critical current density at 77 K and self-field was 39,000 A/cm{sup 2}. Trapped field results confirmed that single grain Y-123 samples were produced utilizing the above process. Our results prove that Yb-123 + liquid (1:1) as a liquid source is effective in producing single grain Y-123 material by IG process.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The impact of geologic parameters and water infiltration on the imprinting of 133Xe

Recent experiments have shown that atmospheric radioxenon passing over a sampling site can be transported into the shallow subsurface by barometric pressure changes. The STOMP simulator is used to examine the impact of seven hydrologic/geologic parameters and water infiltration on the imprinting of radioxenon from a transient plume during two pressure scenarios. Soil hydraulic conductivity was found to be the dominant factor in the amount of xenon imprinted to two meters, particularly in the case when plume passage coincides with increasing pressure.

Radioxenon, Medical isotope production, Barometric↗

Design and engineering of dispersion and loss in photonic crystal fiber 1 × 4 power splitter (PCFPS) based on hole size alteration and optofluidic infiltration

We have presented a technique based on optofluidic infiltration and air-holes diameter variation together to design a 1 × 4 photonic crystal fiber power splitter (PCFPS) which have very low dispersion (D): (0 ≤ D ≤ 2.5 (ps/nm/km) and very low loss (L): 0 ≤ L ≤ 0.025(dB/cm) in a wide range of wavelengths (1100–1700 nm). This approach allows us to control the dispersion of the fundamental mode in a PCF beam splitter by choosing appropriate refractive indices for liquids and suitable diameters for air-holes in PCF power splitter. In fact, the techniques, used in this paper are complementary of each other and give us more excellent results which are better than other reported results in researchers’ works so far. In this work, a new design of 1 × 4 photonic crystal fiber power splitter is proposed by using beam propagation method. An optical Gaussian signal at a wavelength of third communication window range (1550 nm) is inserted into the central core and equally is divided into four core (25% of the total input power interred to each core). In addition, the physical behavior of coupling characteristics is obtained by using coupled mode analysis. Numerical simulations show that input optical signal can be equally divided in photonic crystal fiber structure with low dispersion and low loss. The total size of proposed PCFPS is 30 µm × 30 µm × 1.2 mm, too.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Study of the Mechanism of Liquid Slag Infiltration for Lubrication in Slab Continuous Casting

Consistent and uniform lubrication of the solidifying shell, especially in the meniscus, is crucial for the smooth continuous casting operation and production of strands free of surface defects. Thus, the current study established a coupled model to study the inflow behavior of liquid slag to the mold-strand channel, taking the solidification of steel and slag and the periodic oscillation of mold into account. The difficulties and solutions for the simulation were described in detail. The predicted profiles of the slag rim and initial shell were in good agreement with the reports. The main results indicated that liquid slag could be squeezed out and back into the slag pool in a negative strip period while a large amount of liquid slag could infiltrate into the mold-strand channel. Thus, the amount of slag consumed in the negative strip period was relatively small compared with that in the positive strip period. The predicted variation of slag consumption during mold oscillation was periodic, and the average value was 0.274 kg/m{sup 2}, which agreed well with the slag consumption in industrial practice. The current model can predict and optimize the oscillation parameters aiming at stable lubrication conditions.

36 MATERIALS SCIENCE↗

Effect of Zr Content on Mechanical Properties of Diamond/Cu-Zr Composites Produced by Gas Pressure Infiltration

Diamond particle-reinforced Zr-alloyed Cu matrix (diamond/Cu-xZr) composites were produced by a gas pressure infiltration route, with x = 0.0, 0.3, 0.5, 0.75, and 1.0 wt.%. The x-ray diffraction, scanning electron microscopy, and transmission electron microscopy characterization confirms the formation of ZrC at the diamond/Cu interface. With increasing Zr content, the tensile, bending, and compressive strengths of the diamond/Cu-Zr composites are found to firstly increase and then decrease. The maximum tensile, bending, and compressive strengths at 0.75 wt.% Zr are 108, 360, and 441 MPa, respectively. The variation of the mechanical properties is attributed to the formation of interfacial ZrC. The increase in amount of ZrC strengthens the interface, but large ZrC particles formed at high Zr content are harmful to the interfacial bonding. The result suggests that the mechanical properties of diamond/Cu composites can be enhanced by Cu matrix alloying with Zr.

36 MATERIALS SCIENCE↗

Microstructure and Mechanical Properties of W-ZrC Composites Synthesized by Reactive Melt Infiltration of Zr{sub 2}Cu into Porous Preforms from Partially Carburized W Powders

W-ZrC composites with different W contents from 48 to 73 vol.% have been synthesized by reactive melt infiltration of Zr{sub 2}Cu melt into porous preforms from partially carburized W powders at 1300 °C for 1 h in vacuum. The influences of carbon content and porosity in the preforms on microstructure and mechanical properties of W-ZrC composites are investigated. Cold isostatic pressing followed by pre-sintering process is used to produce porous preforms with suitable porosities of 53.6-47% under a pressure of 100 MPa to allow sufficient penetration of Zr{sub 2}Cu melt into the preforms. Small amounts of Cu-rich phases form in the synthesized W-ZrC composites after a complete reaction of y/2xZr{sub 2}Cu(l) + WC{sub y}(s) = y/xZrC{sub x}(s) + W(s) + y/2xCu(l). These Cu-rich phases are distributed not only at the phase boundaries of W matrix and ZrC grains, but also in the interior of ZrC{sub x} grains. With decreasing W content from 73 to 48 vol.% in the W-ZrC composites, the flexural strength and fracture toughness increase from 519 to 657 MPa and from 9.1 to 10.6 MPa m{sup 1/2}, respectively.

36 MATERIALS SCIENCE↗

Development of Pore-Free Ti-Si-C MAX/Al-Si Composite Materials Manufactured by Squeeze Casting Infiltration

Open-porous MAX phase skeletons from Ti{sub 3}SiC{sub 2} were manufactured by Microwave-Assisted Self-propagating High-temperature Synthesis (MASHS) and subsequently subjected to squeeze casting infiltration with an Al-Si lightweight casting alloy (EN AC-44200). This alloy was chosen due to its high flowability, corrosion resistance and good machinability. The manufactured composites, together with a reference sample of the original alloy, underwent testing of thermal properties, including thermal conductivity and diffusivity, specific heat and thermal expansion in the temperature range 50-500 °C, which corresponds to the expected working temperatures of the material. The fabricated AlSi/Ti{sub 3}SiC{sub 2} composites have significantly increased thermal stability, with coefficients of thermal expansion (approximately 10-11 × 10{sup −6} °C{sup −1}) half that of the original alloy. As regards mechanical properties, the instrumental Young’s modulus and Vickers hardness of the composite materials are 170.8 and 8.5 GPa, respectively. Moreover, the microstructure and phase composition, structural defects and potential impacts between constituents of the manufactured composites were characterized using SEM, TEM and STEM microscopy and EDS and XRD analysis.

36 MATERIALS SCIENCE↗

Characteristics and impact of programmed death-ligand 1 expression, CD8+ tumor-infiltrating lymphocytes, and p16 status in head and neck squamous cell carcinoma

Background: No predictive biomarker of immune checkpoint inhibitors in head and neck squamous cell carcinoma (HNSCC) has been well established. The impact of programmed death-ligand 1 (PD-L1) expression, CD8+ tumor-infiltrating lymphocytes (TILs), and p16 status in HNSCC is unclear and may vary according to ethnicity. Methods: HNSCC patients treated between 2007 and 2013 were reviewed. Archival tissues were retrieved for PD-L1, CD8+ TILs, and p16 analyses. PD-L1 expression was evaluated by using the validated SP142 assay on the VENTANA platform. CD8+ TILs were defined by using semiquantitative scoring. Results: A total of 203 patients were analyzed. PD-L1 expression was observed in 80% of patients and was significantly associated with older age (P < 0.001). A high CD8+ TIL score (≥ 6) was significantly associated with never-smoking (P = 0.020), oral cavity cancer (P < 0.001), and stage M0 at presentation (P = 0.025). The p16 status was positive in 12% of patients. Patients with a high TIL score had a significantly longer OS (P = 0.032). Patients with PD-L1 expression of 1–49% and ≥ 50% were associated with a significantly shorter OS compared with those with PD-L1 < 1% (P = 0.027 and P = 0.011, respectively). Multivariate analysis showed that PD-L1 ≥ 50% was significantly associated with a poor OS. (HR 2.98 [95% CI 1.2–7.39]; P = 0.019.) Conclusions: A high prevalence of PD-L1 expression was observed in HNSCC using the validated SP142 assay. PD-L1 expression was associated with older age, while highly PD-L1 expression (≥ 50%) was an independent prognostic factor for poor OS in anti-PD1/PD-L1 untreated HNSCC patients.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Microvascular dysfunction in infiltrative cardiomyopathies

Infiltrative heart diseases are characterized by myocardial tissue alterations leading to mechanical dysfunction which in turn develops into bi-ventricular congestive heart failure. Also the coronary microvasculature undergoes significant remodeling and dysfunction. The effects of the unbalance of the mechanical cross-talk between cardiac muscle and vessels and of the impairment of vasodilatory function can be measured non-invasively by means of positron emission tomography and cardiac magnetic resonance.

62 RADIOLOGY AND NUCLEAR MEDICINE↗