Search NASA⌕ Search

SEARCH · Search NASA

Results for “Julia”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Collaborative Autonomous Logistics

This video shows a demonstration of collaborative autonomous logistics. Turtlebot, a 1-g stand-in for Astrobee, carried REALM sensors around a mockup of ISS in ARGOS to autonomously survey for a cargo bag stowed in a drawer. It provided the location of the bag to Robonaut, which then autonomously climbed across the mockup to the drawer. Robonaut then used the Affordance Template manipulation framework to localize and open the drawer and then again localize and retrieve the cargo bag.

Badger, Julia M.↗

Spacecraft Dormancy Autonomy Analysis for a Crewed Martian Mission

Current concepts of operations for human exploration of Mars center on the staged deployment of spacecraft, logistics, and crew. Though most studies focus on the needs for human occupation of the spacecraft and habitats, these resources will spend most of their lifetime unoccupied. As such, it is important to identify the operational state of the unoccupied spacecraft or habitat, as well as to design the systems to enable the appropriate level of autonomy. Key goals for this study include providing a realistic assessment of what "dormancy" entails for human spacecraft, exploring gaps in state-of-the-art for autonomy in human spacecraft design, providing recommendations for investments in autonomous systems technology development, and developing architectural requirements for spacecraft that must be autonomous during dormant operations. The mission that was chosen is based on a crewed mission to Mars. In particular, this study focuses on the time that the spacecraft that carried humans to Mars spends dormant in Martian orbit while the crew carries out a surface mission. Communications constraints are assumed to be severe, with limited bandwidth and limited ability to send commands and receive telemetry. The assumptions made as part of this mission have close parallels with mission scenarios envisioned for dormant cis-lunar habitats that are stepping-stones to Mars missions. As such, the data in this report is expected to be broadly applicable to all dormant deep space human spacecraft.

Badger, Julia↗

W8 Test Plans with StreamVanes

This presentation documents the use of the GRC Low Speed Compressor Facility in the Engine Research Building (ERB) W8 to test low pressure ratio fans. Current capabilities are detailed as well as upgrades underway to better understand low pressure ratio fans. Additionally, the use of StreamVanes for studying boundary layer ingestion in to fans is discussed.

Stephens, Julia↗

Modeling-Driven Damage Tolerant Design of Graphene Nanoplatelet/Carbon Fiber/Epoxy Hybrid Composite Panels for Full-Scale Aerospace Structures

The objective of this study is to design a new nano graphenecarbon fiberpolymer hybrid composite that can be used for the NASA SLS Composite Exploration Upper Stage (CEUS) forward skirt structure. The new material will improve the resistance to open-hole compression failure of the structure relative to traditional polymer fiber composites. The material is designed rapidly and with little cost using the Integrated Computational Materials Engineering (ICME) approach. Multiscale modeling and experiments are used to synergistically optimize the material design to yield improved properties and performance by controlling key processing parameters for manufacturing nano-enhanced materials. Specifically, the nanocomposite panel showed a 22 reduction in mass relative to the traditional composite panel, while both designs are equal in terms of ease of manufacture. This potential mass savings corresponds to an estimated 45 savings in materials and manufacturing costs. The multiscale ICME workflow developed for this project can be readily applied to the development of nano-enhanced composite materials and large aerospace structures. In addition, all key aspects of ICME were employed to complete this project including multiscale modeling, experimental characterization and visualization, data management, visualization, error and uncertainty quantification, and education. The results presented herein indicate a dramatic level of success, as well as the power and potential of ICME approach and multiscale modeling for composite materials.

computational mechanics↗

Associative Polymers to Control Formation of Particulate Matter from Ignitable Compositions and Related Compositions, Methods and Systems

Described herein are associative polymers capable of controlling formation of particulate matter from a non-polar ignitable composition upon ignition of the non-polar ignitable composition, alone or in combination with control of a physical and/or chemical property of the non-polar compositions and related compositions, methods and systems. Associative polymers herein described have a non-polar backbone and functional groups presented at ends of the non-polar backbone, with a number of the functional groups presented at the ends of the non-polar backbone formed by associative functional groups capable of undergoing an associative interaction with another associative functional group with an association constant (k) such that the strength of each associative interaction is less than the strength of a covalent bond between atoms and in particular less than the strength of a covalent bond between backbone atoms.

Kornfield, Julia A.↗

20,000 Years of Societal Vulnerability and Adaptation to Climate Change in Southwest Asia

The Fertile Crescent, its hilly flanks and surrounding drylands has been a critical region for studying how climate has influenced societal change, and this review focuses on the region over the last 20,000 years. The complex social, economic, and environmental landscapes in the region today are not new phenomena and understanding their interactions requires a nuanced, multidisciplinary understanding of the past. This review builds on a history of collaboration between the social and natural palaeoscience disciplines. We provide a multidisciplinary, multiscalar perspective on the relevance of past climate, environmental, and archaeological research in assessing present day vulnerabilities and risks for the populations of southwest Asia. We discuss the complexity of palaeoclimatic data interpretation, particularly in relation to hydrology, and provide an overview of key time periods of palaeoclimatic interest. We discuss the critical role that vegetation plays in the human–climate–environment nexus and discuss the implications of the available palaeoclimate and archaeological data, and their interpretation, for palaeonarratives of the region, both climatically and socially. We also provide an overview of how modelling can improve our understanding of past climate impacts and associated change in risk to societies. We conclude by looking to future work, and identify themes of “scale” and “seasonality” as still requiring further focus. We suggest that by appreciating a given locale's place in the regional hydroscape, be it an archaeological site or palaeoenvironmental archive, more robust links to climate can be made where appropriate and interpretations drawn will demand the resolution of factors acting across multiple scales.

Levant↗

Timing and Flux Evolution of the Galactic Center Magnetar SGR J1745-2900

We present the X-ray timing and spectral evolution of the Galactic Center magnetar SGR J1745-2900 (SGR*) for the first 4 months post-discovery using data obtained with the Nuclear Spectroscopic Telescope Array (NuSTAR) and Swift observatories. Our timing analysis reveals a large increase in the magnetar spin-down rate by a factor of 2.6 plus or minus 0.07 over our data span. We further show that the change in spin evolution was likely coincident with a bright X-ray burst observed in 2013 June by Swift, and if so, there was no accompanying discontinuity in the frequency. We find that the source 3 to 10 kiloelectronvolt flux has declined monotonically by a factor of approximately 2 over an 80-day period post-outburst accompanied by an approximately 20 percent decrease in the source's blackbody temperature, although there is evidence for both flux and kiloteslas having leveled off. We argue that the torque variations are likely to be magnetospheric in nature and will dominate over any dynamical signatures of orbital motion around Sgr A*.

Stars: magnetic field↗

A Distributed Hierarchical Framework for Autonomous Spacecraft Control

Future human space missions for exploring beyond low Earth orbit are in the conceptual design stage. One such mission describes a habitat in cis-lunar orbit that is visited by crew periodically, others describe missions to Mars. These missions have one important thing in common: the need for autonomy on the spacecraft. This need stems from the latency and bandwidth constraints on communications between the vehicle and ground control. A variable amount of autonomy may be necessary whether the spacecraft has crew on board or not. Spacecraft are complex systems that are engineered as a collection of subsystems. These subsystems work together to control the overall state of the spacecraft. As such, solutions that increase the autonomy of the spacecraft (called autonomous functions) should respect both the independence and interconnectedness of the spacecraft subsystems. This distributed and hierarchical approach to system monitoring and control is a key idea in the Modular Autonomous Systems Technology (MAST) framework. The MAST framework enables a component-based architecture that provides interfaces and structure to developing autonomous technologies. The framework enforces a distributed, hierarchical architecture for autonomous control systems across subsystems, systems, elements, and vehicles. An example autonomous system was implemented in this framework and tested using realistic spacecraft software and hardware simulations. This paper will discuss the framework, tests conducted, results, and future work.

Badger, Julia M.↗

Swirl Distortion Using Stream Vanes for Boundary Layer Ingestion Research

The swirl distortion of a StreamVane (Trademark) was investigated in the NASA Glenn Research Center W8 test facility. The StreamVane (Trademark) was designed and generated by Virginia Tech based on CFD simulations and included a center body at the aerodynamic interface plane. The swirl pattern generated by the distortion was evaluated using a dense grid of 5-hole Pitot probe measurements captured using a rotating array of probes. Good agreement was found between the design intent and the results at 38.5 kg/s mass flow. The StreamVane (Trademark) swirl results were compared to clean facility flow at 5 inlet mass flows and found to be consistent. Additionally, the axial location of the StreamVane (Trademark) relative to the measurement plane was investigated to determine the impact on downstream total pressure loss generated by the vanes. The intent of this work was to assess the viability of using a StreamVane (Trademark) to generate a Type I or Type II distortion into a Boundary Layer Ingesting propulsor to assess its aerodynamic performance and aeromechanic response.

swirl distortion↗

Evaluation of Global Simulations of Aerosol Particle and Cloud Condensation Nuclei Number, with Implications for Cloud Droplet Formation

A total of 16 global chemistry transport models and general circulation models have participated in this study; 14 models have been evaluated with regard to their ability to reproduce the near-surface observed number concentration of aerosol particles and cloud condensation nuclei (CCN), as well as derived cloud droplet number concentration (CDNC). Model results for the period 2011-2015 are compared with aerosol measurements (aerosol particle number, CCN and aerosol particle composition in the submicron fraction) from nine surface stations located in Europe and Japan. The evaluation focuses on the ability of models to simulate the average across time state in diverse environments and on the seasonal and short-term variability in the aerosol properties. There is no single model that systematically performs best across all environments represented by the observations. Models tend to underestimate the observed aerosol particle and CCN number concentrations, with average normalized mean bias (NMB) of all models and for all stations, where data are available, of -24% and -35% for particles with dry diameters > 50 and > 120nm, as well as -36% and -34% for CCN at supersaturations of 0.2% and 1.0%, respectively. However, they seem to behave differently for particles activating at very low supersaturations (< 0.1%) than at higher ones. A total of 15 models have been used to produce ensemble annual median distributions of relevant parameters. The model diversity (defined as the ratio of standard deviation to mean) is up to about 3 for simulated N3 (number concentration of particles with dry diameters larger than 3 nm) and up to about 1 for simulated CCN in the extra-polar regions. A global mean reduction of a factor of about 2 is found in the model diversity for CCN at a supersaturation of 0.2% (CCN(0.2)) compared to that for N3, maximizing over regions where new particle formation is important. An additional model has been used to investigate potential causes of model diversity in CCN and bias compared to the observations by performing a perturbed parameter ensemble (PPE) accounting for uncertainties in 26 aerosol-related model input parameters. This PPE suggests that biogenic secondary organic aerosol formation and the hygroscopic properties of the organic material are likely to be the major sources of CCN uncertainty in summer, with dry deposition and cloud processing being dominant in winter. Models capture the relative amplitude of the seasonal variability of the aerosol particle number concentration for all studied particle sizes with available observations (dry diameters larger than 50, 80 and 120nm). The short-term persistence time (on the order of a few days) of CCN concentrations, which is a measure of aerosol dynamic behavior in the models, is underestimated on average by the models by 40% during winter and 20% in summer.

cloud droplets↗

Observations and Recommendations for the Calibration of Landsat 8 OLI and Sentinel 2 MSI for Improved Data Interoperability

Combining data from multiple sensors into a single seamless time series, also known as data interoperability, has the potential for unlocking new understanding of how the Earth functions as a system. However, our ability to produce these advanced data sets is hampered by the differences in design and function of the various optical remote-sensing satellite systems. A key factor is the impact that calibration of these instruments has on data interoperability. To address this issue, a workshop with a panel of experts was convened in conjunction with the Pecora 20 conference to focus on data interoperability between Landsat and the Sentinel 2 sensors. Four major areas of recommendation were the outcome of the workshop. The first was to improve communications between satellite agencies and the remote-sensing community. The second was to adopt a collections-based approach to processing the data. As expected, a third recommendation was to improve calibration methodologies in several specific areas. Lastly, and the most ambitious of the four, was to develop a comprehensive process for validating surface reflectance products produced from the data sets. Collectively, these recommendations have significant potential for improving satellite sensor calibration in a focused manner that can directly catalyze efforts to develop data that are closer to being seamlessly interoperable.

calibration; geometric; radiometric; Landsat; Sent↗

Integrated System for Autonomous and Adaptive Caretaking (ISAAC)

This presentation is an overview of the Integrated System for Autonomous and Adaptive Caretaking (ISAAC) project, funded by the STMD Game Changing Development program to develop autonomous caretaking capabilities for future human exploration spacecraft, especially during uncrewed phases.

Deans, Matt↗

A Recent Volcanic Eruption, Holuhraun, in the Central Highlands of Iceland as a Mars analog: The 2018 Field Campaign of FELDSPAR

In summer 2018, FELDSPAR conducted an analog sampling expedition to the Holuhraun volcanoin the central highlands of Iceland that erupted from August 2014 to February 2015. Holuhraun hassteep gradients within an otherwise relatively controlled region, and thus served as the primaryMars analog site for the 2018 FELDSPAR field campaign. Samples along gradients of mineralogyas measured via near-IR and visible reflectance spectroscopy, temperature as measured by an IRprobe, and physical location about the fissure (slope incline, directionality, height up the slope,etc.) were analyzed in-field with reflectance spectroscopy and X-ray fluorescence, in the field labfor adenosine trisphosphate (ATP) as an indicator of metabolic activity, and after return to thehome lab for both geochemical and geophysical parameters (moisture content, grain size, X-raydiffraction) and biochemical parameters (DNA content and speciation). This abstract representsthe first report on the 2018 field campaign with initial results and interpretation. This work is part ofField Exploration and Life Detection Sampling for Planetary Analogue Research (FELDSPAR), onFacebook @FELDSPAResearch.

Volcanic↗

First Results from Laser-Based Spectral Characterization of Landsat 9 Operational Land Imager-2

Landsat 9 will continue the Landsat data record into its fifth decade with launch scheduled for December 2020. The two instruments on Landsat 9 are Thermal Infrared Sensor-2 (TIRS-2) and Operational Land Imager-2 (OLI-2). OLI-2 is a nine-channel pushbroom imager with a 15-degree field of view that will have a 16-day measurement cadence from its nominal 705-km orbit altitude. A key aspect of the data that will be produced by OLI-2 is its spectral fidelity which enables countless science applications. The prelaunch test campaign for spectral characterization of OLI-2 was substantially improved relative to the methodology used for OLI: the full spectral response of every detector was characterized with greater accuracy, sampling, and precision. This paper will describe how this was accomplished with a tunable laser-based light source called Goddard Laser for Absolute Measurement of Radiance (GLAMR).

tunable laser↗

Exposure of the EU-28 Food Imports to Extreme Weather Disasters in Exporting Countries

EU-28 relies on a diversified foreign market, even for crops for which it has a high self-sufficiency.This study contributes to the discussion on the vulnerability of agri-food supply to the impacts of extreme weather disasters (EWD). We focus on the largest import commodities of the EU-28 and we aim to (1) map external dependencies of EU-28 agri-food sector, (2) estimate the impact of EWD on crop production in countries from which the EU-28 receives their imports, and (3) assess the exposure of EU-28 agri-food imports to such impacts. Crop and trade data areacquired through EUROSTAT and FAOSTAT, EWD records from EM-DAT, all between 1961 and 2016. A superposed epoch analysis is used to estimate the impact of EWD on the average national production, yield and harvested area of selected crops in exporting countries. The EU-28 imports between 35-100% of its consumption of soybeans, banana, tropical fruits, coffee and cocoa. Our study reveals a substantial impact of EWD, especially due to droughts andheat waves, on the production of soybeans, tropical fruits, and cocoa, with import weighted impacts of 3, 8, and 7%, respectively. Floods cause weighted impacts of 7% (soybeans) and 8% (tropical fruits). Coffee production shows gains during cold waves, but the inter-annual variability offsets these effects.

Teresa Armada Bras↗

Landsat 9: Mission Status and Prelaunch Instrument Performance Characterization and Calibration

Landsat 9 is currently under development as a joint effort between NASA and the United States Geological Survey (USGS). Landsat 9 is essentially a rebuild of Landsat 8 and has the same two sensors, the Operational Land Imager (OLI) and the Thermal Imaging Sensor (TIRS). The OLI-2 on Landsat 9, is being built by Ball Aerospace and has completed its pre-launch characterization and calibration and is scheduled to be delivered in the summer of 2019. The TIRS-2, being built by Goddard Space Flight Center, is currently undergoing testing through Spring 2019 and also scheduled for summer 2019 delivery. Several improvements to the characterization of both instruments have been incorporated into the testing plan, including improved spectral and radiometric characterization. The instruments will then be integrated onto the spacecraft being built by Northrop Grumman Innovation Systems (NGIS). The mission is targeted to launch as early as December 2020 on an Atlas-5.

Markham, Brian↗