Search NASA⌕ Search

SEARCH · Search NASA

Results for “Kelvin waves”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

A Local Condensation Analysis Representing Two-phase Annular Flow in Condenser/radiator Capillary Tubes

NASA's effort for the thermal environmental control of the Space Station Freedom is directed towards the design, analysis, and development of an Active Thermal Control System (ATCS). A two phase, flow through condenser/radiator concept was baselined, as a part of the ATCS, for the radiation of space station thermal load into space. The proposed condenser rejects heat through direct condensation of ATCS working fluid (ammonia) in the small diameter radiator tubes. Analysis of the condensation process and design of condenser tubes are based on the available two phase flow models for the prediction of flow regimes, heat transfer, and pressure drops. The prediction formulas use the existing empirical relationships of friction factor at gas-liquid interface. An attempt is made to study the stability of interfacial waves in two phase annular flow. The formulation is presented of a stability problem in cylindrical coordinates. The contribution of fluid viscosity, surface tension, and transverse radius of curvature to the interfacial surface is included. A solution is obtained for Kelvin-Helmholtz instability problem which can be used to determine the critical and most dangerous wavelengths for interfacial waves.

Karimi, Amir↗
DOE OSTI2025

Oceanic mixing and waves in the presence of a suspended canopy

Large-eddy simulations are analysed to determine the influence of suspended canopies, such as those formed in macroalgal farms, on ocean mixed layer (OML) deepening and internal wave generation. In the absence of a canopy, we show that Langmuir turbulence, when compared with wind-driven shear turbulence, results in a deeper OML and more pronounced internal waves beneath the OML. Subsequently, we examine simulations with suspended canopies of varying densities located in the OML, in the presence of a background geostrophic current. Intensified turbulence occurs in the shear layer at the canopy’s bottom edge, arising from the interaction between the geostrophic current and canopy drag. Structures resembling Kelvin–Helmholtz (KH) instability emerge as the canopy shear layer interacts with the underlying stratification, radiating internal waves beneath the OML. Both intensified turbulence and lower-frequency motions associated with KH-type structures are critical factors in enhancing mixing. Consequently, the OML depth increases by up to a factor of two compared with cases without a canopy. Denser canopies and stronger geostrophic currents lead to more pronounced KH-type structures and internal waves, stronger turbulence and greater OML deepening. Additionally, vertical nutrient transport is enhanced as the OML deepens due to the presence of the canopy. Considering that the canopy density investigated in this study closely represents offshore macroalgal farms, these findings suggest a mechanism for passive nutrient entrainment conducive to sustainable farming. Overall, this study reveals the intricate interactions between the suspended canopy, turbulent mixing and stratification, underscoring their importance in reshaping OML characteristics.

Bo, Tong (ORCID:0000000260300561)↗
NASA NTRS2011

Phase-Controlled Magnetic Mirror for Wavefront Correction

Typically, light interacts with matter via the electric field and interaction with weakly bound electrons. In a magnetic mirror, a patterned nanowire is fabricated over a metallic layer with a dielectric layer in between. Oscillation of the electrons in the nanowires in response to the magnetic field of incident photons causes a re-emission of photons and operation as a "magnetic mirror." By controlling the index of refraction in the dielectric layer using a local applied voltage, the phase of the emitted radiation can be controlled. This allows electrical modification of the reflected wavefront, resulting in a deformable mirror that can be used for wavefront control. Certain applications require wavefront quality in the few-nanometer regime, which is a major challenge for optical fabrication and alignment of mirrors or lenses. The use of a deformable magnetic mirror allows for a device with no moving parts that can modify the phase of incident light over many spatial scales, potentially with higher resolution than current approaches. Current deformable mirrors modify the incident wavefront by using nano-actuation of a substrate to physically bend the mirror to a desired shape. The purpose of the innovation is to modify the incident wavefront for the purpose of correction of fabrication and alignment-induced wavefront errors at the system level. The advanced degree of precision required for some applications such as gravity wave detection (LISA - Laser Interferometer Space Antenna) or planet finding (FKSI - Fourier-Kelvin Stellar Interferometer) requires wavefront control at the limits of the current state of the art. All the steps required to fabricate a magnetic mirror have been demonstrated. The modification is to apply a bias voltage to the dielectric layer so as to change the index of refraction and modify the phase of the reflected radiation. Light is reflected off the device and collected by a phase-sensing interferometer. The interferometer determines the initial wavefront of the device and fore optics. A wavefront correction is calculated, and voltage profile for each nanowire strip is determined. The voltage is applied, modifying the local index of refraction of the dielectric under the nanowire strip. This modifies the phase of the reflected light to allow wavefront correction.

Hagopian, John↗
NASA NTRS2018

Aerogel Scattering Filters for Cosmic Microwave Background Observations

We present the design and performance of broadband and tunable infrared-blocking filters for millimeter and sub-millimeter astronomy composed of small scattering particles embedded in an aerogel substrate. The ultra-low-density (< 100 mg/cu cm) aerogel substrate provides an index of refraction as low as 1.05, removing the need for anti-reflection coatings and allowing for broadband operation from DC to above 1 THz. The size distribution of the scattering particles can be tuned to provide a variable cutoff frequency. Aerogel filters with embedded high-resistivity silicon powder are being produced at 40-cm diameter to enable large-aperture cryogenic receivers for cosmic microwave background polarimeters, which require large arrays of sub-Kelvin detectors in their search for the signature of an inflationary gravitational-wave background.

Essinger-Hileman, Thomas↗
NASA NTRS2020

Aerogel Scattering Filters for Cosmic Microwave Background Observations

We present the design and performance of broadband and tunable infrared-blocking filters for millimeter and submillimeter astronomy composed of small scattering particles embedded in an aerogel substrate. The ultralow-density (typically<150 mg/cm3) aerogel substrate provides an index of refraction as low as 1.05, removing the need for antireflection coatings and allowing for broadband operation from DC to above 1 THz. The size distribution of the scattering particles can be tuned to provide a variable cutoff frequency. Aerogel filters with embedded high-resistivity silicon powder are being produced at 40 cm diameter to enable large-aperture cryogenic receivers for cosmic microwave background polarimeters, which require large arrays of sub-Kelvin detectors in their search for the signature of an inflationary gravitational-wave background.

Thomas Essinger-Hileman↗
NASA NTRS1977

Observations of intense velocity shear and associated electrostatic waves near an auroral arc

Simultaneous measurements of energetic particles and ac electric fields made by the javelin sounding rocket NASA 8:56 during the late expansion phase of a magnetic storm have revealed an intense shear in plasma flow of magnitude 20 (m/s)/m at the edge of an auroral arc. Structure with two characteristic scales sizes is displayed in the region of shear. Larger structures are of the order of several kilometers in size. Intense irregularities with characteristic wavelengths smaller than the scale size of the shear have also been detected. The large-scale changes in the orientation of the charge sheet at the edge of the arc may be due to the Kelvin-Helmholtz branch; shorter-wavelength modes may be related to the shear driven resistive drift wave. Observations are consistent with the suggestion that velocity shear instabilities may play a role in the formation of high-latitude irregularities.

Kelley, M. C.↗
NASA NTRS1990

Reconnection versus Kelvin-Helmholtz instability in magnetospheric energy transfer - ISEE observations

Examination of multiple magnetopause crossings observed with the magnetometers on ISEE 1 and 2 makes it possible to determine the amplitude of the oscillation of surface waves on the magnetopause with periods greater than about 2 min and its dependence on latitude, local time, and the direction of the IMF. The magnetopause is more oscillatory for southward IMF than for northward IMF. When the IMF is southward, the amplitude of the oscillation increases with increasing angle from the subsolar point, which suggests that reconnection-related phenomena can generate surface waves on the magnetopause. When the IMF is northward, the oscillation does not grow with distance from the subsolar point, which is contrary to the expected growth of the Kelvin-Helmholtz (K-H) instability. It is also found that solar-wind pressure fluctuations may cause all of the observed boundary oscillations for northward IMF.

Song, PU↗
DOE OSTI2024

Performance of high-order Godunov-type methods in simulations of astrophysical low Mach number flows

High-order Godunov methods for gas dynamics have become a standard tool for simulating different classes of astrophysical flows. Their accuracy is mostly determined by the spatial interpolant used to reconstruct the pair of Riemann states at cell interfaces and by the Riemann solver that computes the interface fluxes. In most Godunov-type methods, these two steps can be treated independently, so that many different schemes can in principle be built from the same numerical framework. Because astrophysical simulations often test out the limits of what is feasible with the computational resources available, it is essential to find the scheme that produces the numerical solution with the desired accuracy at the lowest computational cost. However, establishing the best combination of numerical options in a Godunov-type method to be used for simulating a complex hydrodynamic problem is a nontrivial task. In fact, formally more accurate schemes do not always outperform simpler and more diffusive methods, especially if sharp gradients are present in the flow. For this work, we used our fully compressible Seven-League Hydro (SLH) code to test the accuracy of six reconstruction methods and three approximate Riemann solvers on two- and three-dimensional (2D and 3D) problems involving subsonic flows only. We considered Mach numbers in the range from 10 −3 to 10 −1 , which are characteristic of many stellar and geophysical flows. In particular, we considered a well-posed, 2D, Kelvin–Helmholtz instability problem and a 3D turbulent convection zone that excites internal gravity waves in an overlying stable layer. Although the different combinations of numerical methods converge to the same solution with increasing grid resolution for most of the quantities analyzed here, we find that (i) there is a spread of almost four orders of magnitude in computational cost per fixed accuracy between the methods tested in this study, with the most performant method being a combination of a low-dissipation Riemann solver and a sextic reconstruction scheme; (ii) the low-dissipation solver always outperforms conventional Riemann solvers on a fixed grid when the reconstruction scheme is kept the same; (iii) in simulations of turbulent flows, increasing the order of spatial reconstruction reduces the characteristic dissipation length scale achieved on a given grid even if the overall scheme is only second order accurate; (iv) reconstruction methods based on slope-limiting techniques tend to generate artificial, high-frequency acoustic waves during the evolution of the flow; and (v) unlimited reconstruction methods introduce oscillations in the thermal stratification near the convective boundary, where the entropy gradient is steep.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1981

The response of a linear baroclinic equatorial ocean to periodic forcing

An investigation is conducted regarding the periodic response of the linear inviscid shallow water equations in a meridionally unbounded basin to zonal forcings at a single low frequency omega. A general solution in the long wave approximation and on an equatorial beta-plane is obtained by summing the Kelvin mode and the finite sum of Rossby modes whose turning points lie equatorward of the turning latitude at frequency omega. The results of the investigation suggest that even if the low frequency forcing has a simple structure, considerable spatial inhomogeneity in the deep ocean response would have to be expected. On the basis of linear inviscid theory, some conclusions are drawn about the causes of the differences between equatorial thermocline response in the Atlantic and Pacific.

Cane, M. A.↗
NASA NTRS1986

Effects of the interaction between plasma and neutrals on the stability of the cometary ionopause

It is pointed out that plasma in the cometary ionosphere is collisionally coupled to neutrals which flow out from the nucleus. The present study is concerned with the effects of this coupling on the stability of the cometary ionopause. Because of this coupling, a damping of waves occurs. However, it is found that the coupling alone cannot quench the Kelvin-Helmholtz (K-H) instability, in contradiction to the assumption by Galeev and Lipatov (1984). Notwithstanding the plasma-neutral drag, the entire cometary ionopause can be subjected to the K-H instability. This situation might be responsible for the penetration of the interplanetary magnetic field into the cometary ionosphere, as it has been suggested by Ershkovich and Mendis (1983).

Ershkovich, A. I.↗
NASA NTRS1994

FPA Needs for NASA Missions

NASA has identified needs for a broad range of specialized, optimized infrared detectors and IR detector arrays to meet its future mission requirements. Space infrared missions will be conducted in a number of discipline areas, including astrophysics, earth and atmospheric science, planetary systems, and space physics. To allow investigators to meet scientific goals, specific technical requirements for infrared detectors have been developed. These challenging and often unique requirements include, for example, achieving background-limited performance in a cryogenic space telescope; developing long-wave IR arrays which achieve near background-limited performance at elevated (approximately 60 kelvin) operating temperatures; achieving IR arrays with large two-dimensional formats, excellent uniformity and linearity, and low power dissipation; demonstrating an imaging array technology for very long-wavelength (less than 100 microns) IR sensing, and IR devices with extremely low dark current levels; and demonstrating stable, low-noise, low-dissipation readouts. These requirements can in some cases be met by adaptation or extension of technologies originally developed by DoD. In other cases, the novel spectral range or other characteristics require unique solutions. Examples are given of recent scientific results which have been made possible with IR arrays. These serve as a preview of the kinds of science return which can be enabled by advanced IR focal plane technology from space platforms.

McCreight, Craig R.↗
NASA NTRS2018

Dawn- Dusk Auroral Oval Oscillations Associated with High- Speed Solar Wind

We report evidence of global-scale auroral oval oscillations in the millihertz range, using global auroral images acquired from the Ultraviolet Imager on board the decommissioned Polar satellite and concurrent solar wind measurements. On the basis of two events (15 January 1999 and 6 January 2000) studied, it is found that (1) quasi-periodic auroral oval oscillations (approximately 3 megahertz) can occur when solar wind speeds are high at northward or southward interplanetary magnetic field turning, (2) the oscillation amplitudes range from a few to more than 10 degrees in latitudes, (3) the oscillation frequency is the same for each event irrespective of local time and without any azimuthal phase shift (i.e., propagation), (4) the auroral oscillations occur in phase within both the dawn and dusk sectors but 180 degrees out of phase between the dawn and dusk sectors, and (5) no micropulsations on the ground match the auroral oscillation periods. While solar wind conditions favor the growth of the Kelvin-Helmholtz (K-H) instability on the magnetopause as often suggested, the observed wave characteristics are not consistent with predictions for K-H waves. The in-phase and out-of-phase features found in the dawn-dusk auroral oval oscillations suggest that wiggling motions of the magnetotail associated with fast solar winds might be the direct cause of the global-scale millihertz auroral oval oscillations. Plain Language Summary: We utilize global auroral image data to infer the motion of the magnetosphere and show, for the first time, the entire magnetospheric tail can move east-west in harmony like a windsock flapping in wind. The characteristic period of the flapping motion may be a major source of global long-period ULF (Ultra Low Frequency) waves, adding an extra source of the global mode ULF waves.

Liou, Kan↗
NASA NTRS2019

Sub-Kelvin Cooling for Two Kilopixel Bolometer Arrays in the PIPER Receiver

The Primordial Inflation Polarization Explorer (PIPER) is a balloon-borne telescope mission to search for inflationary gravitational waves from the early universe. PIPER employs two 32 × 40 arrays of superconducting transition-edge sensors, which operate at 100 mK. An open bucket Dewar of liquid helium maintains the receiver and telescope optics at 1.7 K. We describe the thermal design of the receiver and sub-Kelvin cooling with a continuous adiabatic demagnetization refrigerator (CADR). The CADR operates between 70 and 130 mK and provides ≈10 μW cooling power at 100 mK, nearly five times the loading of the two detector assemblies. We describe electronics and software to robustly control the CADR, overall CADR performance in flightlike integrated receiver testing, and practical considerations for implementation in the balloon float environment.

Switzer, E. R.↗
NASA NTRS1977

Is the common definition of the Mie-Grueneisen equation of state inconsistent

Anharmonic models are used to describe the high temperatures and the electronic effects characteristic of shock wave phenomena and planetary interiors. It is found that a generalized Grueneisen function dependent on temperature and volume is necessary for the self-consistent application of the Mie-Grueneisen equation at the physical conditions encountered in shock wave phenomena or in the interior of planets. It is noted that at temperatures of a few thousand degrees Kelvin, by deriving the function in terms of anharmonic lattice dynamics, the difference between gamma and gamma(th) is of the same order of a magnitude as gamma. This leads to the conclusions that (1) gamma is not a function of temperature and (2) gamma?gamma(th) does not explain either the equation of state of planetary interiors or high-temperature shock wave phenomena.

Mulargia, F.↗
NASA NTRS1987

Waves on the subsolar ionopause of Venus

The subsolar ionopause of Venus is expected to be stable to both the Kelvin-Helmholtz and flute instabilities. However, magnetic profiles obtained in the subsolar region indicate that the surface of the ionopause contains large amplitude corrugations, perhaps incipient flux ropes. A possible mechanism for destabilizing the boundary is suggested by the observation that the ion density does not drop abruptly at the ionopause but continues to decrease smoothly into the magnetosheath.

Russell, C. T.↗
NASA NTRS1987

ISEE 3 magnetopause crossings - Evidence for the Kelvin-Helmholtz instability

The role of the Kelvin-Helmholtz instability in driving magnetopause motion is investigated on the basis of correlated ISEE-3 magnetometer measurements and IMP-8 solar-wind/magnetosheath velocities. The data are presented in graphs and briefly characterized, comparing the daily frequency of magnetopause crossings by ISEE-3 with the velocities. It is found that the instability criterion for longitudinal waves is only rarely satisfied in these measurements, while that for waves with an azimuthal component is satisfied in over 50 percent of the cases. It is inferred that the Kelvin-Helmholtz instability is probably the cause of motions with magnetotail-boundary interarrival times of 20 min or less.

Sibeck, D. G.↗
NASA NTRS1997

Effects of Acoustically Lined Cylindrical Ducts on Instability Waves in Confined Supersonic Jets

The pressure disturbances generated by an instability wave in the shear layer of a supersonic jet are studied for an axisymmetric jet inside a lined cylindrical duct. For the supersonic jet, locally linear stability analysis with duct wall boundary conditions is used to calculate the eigenvalues and the eigenfunctions. These values are used to determine the growth rates and phase velocities of the instability waves and the radial pressure disturbance patterns. The study is confined to the dominant Kelvin-Helmholtz instability mode and to the region just downstream of the nozzle exit where the shear layer is growing but is still small in size compared to the radius of the duct. Numerical results are used to study the effects of changes in the outer flow, growth in the shear layer thickness, wall distance, wall impedance, and frequency. Results indicate that the effects of the duct wall on shear layer growth rates diminish as the outer flow increases. Also, wall reflections cause variations in growth rates depending on wall height and Strouhal number. These variations are due to the phase relationship between the outgoing and the reflected incoming pressure disturbances at the shear layer. The growth rate variations can be reduced and the maximum growth rate minimized by keeping the imaginary part of the impedance negative.

Dahl, Milo D.↗
NASA NTRS1986

A numerical simulation of barotropic instability. III - Wave-wave interaction in the presence of dissipation

A fully nonlinear model of barotropic instability including dissipation is used to investigate the evolution of the integrated enstrophy and vorticity. The dissipation independent limits on the integrated enstrophy and the long period oscillation in the integrated enstrophy found by Schoeberl and Lindzen are verified. The enstrophy oscillations are similar to those previously noted for two-dimensional Kelvin-Helmholtz instabilities. They are produced by advection of the vorticity back and forth across the region of instability by the largest scale wave. A simple expression that accurately estimates the period of these oscillations is derived using the saturation theory.

Schoeberl, M. R.↗