SEARCH · Search NASA

Results for “Kinetic methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

All sources NASA NTRS DOE OSTI

NASA NTRS1979

Comparison of dynamic crystallization techniques on Apollo 15 quartz normative basalts

The paper compares dynamic crystallization techniques used on Apollo 15 quartz normative basalts which show differences related to their method. The variation of pyroxene core major element chemistry with cooling rate is confirmed, and it is shown that the Fe loss from liquid is shifted toward the En-Di joint; it is suggested that the nucleation temperature and breakdown of equilibrium partitioning as a function of cooling rate dictate the core composition. It is concluded that the different crystallization behavior that results from the Fe-capsule and Fe-loop container methods is related to the nucleation kinetics.

Lofgren, G. E.↗

NASA NTRS1981

Synthesis and characteristics of polyarylene ether sulfones

A method utilizing potassium carbonate/dimethyl acetamide, as base and solvent respectively, was used for the synthesis of several homopolymers and copolymers derived from various bisphenols. It is demonstrated that this method deviates from simple second order kinetics; this deviation being due to the heterogeneous nature of the reaction. Also, it is shown that a liquid induced crystallization process can improve the solvent resistance of these polymers. Finally, a Monte Carlo simulation of the triad distribution of monomers in nonequilibrium copolycondensation is discussed.

Viswanathan, R.↗

NASA NTRS1982

The isotopes of H through C in galactic cosmic rays

The charge, energy spectra, and isotopic composition of hydrogen through nitrogen have been studied with the GSFC/UNH cosmic ray experiments on board the Pioneer 10 and 11 spacecraft. Good charge and mass resolution have been obtained by utilizing three parameter analysis (i.e., two measurements of delta E and a measurement of the residual kinetic energy of stopping particles). This method allows isotopic resolution for the High Energy Telescope (HET) which operates over a typical energy range of 30-56-MeV/nuc for He. The observations will be over solar quiet times from September 1976-September 1977. The resolution, methods of analysis, spectra, and isotopic composition will be presented and discussed where the statistical significance of H to C isotopes is meaningful.

Smith, B.↗

NASA NTRS1990

Computer aided mechanogenesis of skeletal muscle organs from single cells in vitro

Complex mechanical forces generated in the growing embryo play an important role in organogenesis. Computerized application of similar forces to differentiating skeletal muscle myoblasts in vitro generate three dimensional artificial muscle organs. These organs contain parallel networks of long unbranched myofibers organized into fascicle-like structures. Tendon development is initiated and the muscles are capable of performing directed, functional work. Kinetically engineered organs provide a new method for studying the growth and development of normal and diseased skeletal muscle.

Vandenburgh, Herman H.↗

NASA NTRS1991

Computer-aided mechanogenesis of skeletal muscle organs from single cells in vitro

Vanderburgh, Herman H.↗

NASA NTRS2006

Effects of Kinetic Processes in Shaping Io's Global Plasma Environment: A 3D Hybrid Model

The global dynamics of the ionized and neutral gases in the environment of Io plays an important role in the interaction of Jupiter s corotating magnetospheric plasma with Io. Stationary simulations of this problem have already been done using the magnetohydrodynamics (MHD) and the electrodynamics approaches. One of the major results of recent simplified two-fluid model simulations [Saur, J., Neubauer, F.M., Strobel, D.F., Summers, M.E., 2002. J. Geophys. Res. 107 (SMP5), 1-18] was the production of the structure of the double-peak in the magnetic field signature of the Io flyby. These could not be explained before by standard MHD models. In this paper, we present a hybrid simulation for Io with kinetic ions and fluid electrons. This method employs a fluid description for electrons and neutrals, whereas for ions a particle approach is used. We also take into account charge-exchange and photoionization processes and solve self-consistently for electric and magnetic fields. Our model may provide a much more accurate description for the ion dynamics than previous approaches and allows us to account for the realistic anisotropic ion velocity distribution that cannot be done in fluid simulations with isotropic temperatures. The first results of such a simulation of the dynamics of ions in Io s environment are discussed in this paper. Comparison with the Galileo IO flyby results shows that this approach provides an accurate physical basis for the interaction and can therefore naturally reproduce all the observed salient features.

Lipatov, Alexander S.↗

NASA NTRS2017

Microstructural Characterization and Modeling of SLM Superalloy 718

Superalloy 718 is an excellent candidate for selective laser melting (SLM) fabrication due to a combination of excellent mechanical properties and workability. Predicting and validating the microstructure of SLM-fabricated Superalloy 718 after potential post heat-treatment paths is an important step towards producing components comparable to those made using conventional methods. At present, obtaining accurate volume fraction and size measurements of gamma-double-prime, gamma-prime and delta precipitates has been challenging due to their size, low volume fractions, and similar chemistries. A technique combining high resolution distortion corrected SEM imaging and with x-ray energy dispersive spectroscopy has been developed to accurately and independently measure the size and volume fractions of the three precipitates. These results were further validated using x-ray diffraction and phase extraction methods and compared to the precipitation kinetics predicted by PANDAT and JMatPro. Discrepancies are discussed in context of materials properties, model assumptions, sampling, and experimental errors.

SEM↗

DOE OSTI2026

Determining the Solubility Behavior of Kogarkoite in Simulated Nuclear Waste

Kogarkoite (Na 3 FSO 4 ) is a sparingly soluble fluoride–sulfate double salt that has been identified in high level nuclear waste sludge at the Hanford Site and, more recently, in sludge batch compilation samples at the Savannah River Site (SRS). Due to its complex dissolution behavior, which exhibits an inverse dependence on sodium ion activity, the presence of this mineral poses significant challenges to waste retrieval and processing. Incomplete dissolution during sludge washing can lead to the retention of fluoride and sulfate in the high-level waste feed, potentially causing the formation of corrosive, immiscible molten salt layers, known as "glass gall,” in vitrification melters. Current efforts to optimize flowsheet parameters and wash-water volumes are hindered by the absence of a commercially available, certified reference material, which prevents the accurate calibration of analytical methods and the verification of dissolution kinetics. To address this critical gap, this research focuses on the laboratory synthesis of pure Kogarkoite to serve as a standard for comprehensive solubility and washing performance testing. A coupled synthesis and simulant campaign was executed using an evaporative crystallization protocol designed to replicate the dynamic concentration effects observed in tank farm operations. Thirteen simulant matrices were prepared by dissolving systematically varied ratios of sodium fluoride (NaF) and sodium sulfate (Na 2 SO 4 ) in deionized water under three distinct caustic regimes: 0.0 g (control), 4.0 g (~1 M), and 12.0 g (~3 M) sodium hydroxide (NaOH). While thermodynamic equilibrium models suggest that high-caustic environments should favor the stability of the double salt7, results from this evaporative study at 25 0 C revealed a distinct kinetic divergence. Simulants with high hydroxide loading predominantly yielded large, blocky crystals of sodium sulfate decahydrate (Na 2 SO 4 .10H 2 O). Successful synthesis of pure Kogarkoite was achieved exclusively in specific NaOH-free compositional windows, where the precipitate manifested as fine, opaque granular aggregates. Ion chromatography (IC) analysis confirmed phase purity through the simultaneous stoichiometric depletion of both fluoride and sulfate from the supernatant. This successful synthesis establishes a reproducible route to generate bulk Kogarkoite, enabling the subsequent phase of quantitative dissolution testing using inhibited water to optimize sludge-batch assembly.

Sarker, Md Sharif [Florida International Univ. (FI↗

DOE OSTI2024

Microstructural Coarsening Kinetics and Mechanical Property Changes in Long-Term Aged Sn–Pb–Sb Solder Joints

Tin-lead-antimony (50Sn–47Pb–3Sb wt.%) soldered assemblies were mechanically tested approximately 30 years after initial production and found to have solder joints of reduced strength. The microstructure of this solder alloy exhibits a ternary eutectic structure with Sn-rich, Pb-rich, and SnSb phases. Accelerated aging was performed to evaluate solder microstructural coarsening and associated strength of laboratory solder joints to correlate these properties to the “naturally aged” solder joints. Isothermal aging was conducted at room temperature, 55, 70, 100, and 135 °C and aging times that ranged from 0.1 to 365 days. The coarsening kinetics of the Pb-rich phase were determined through optical microscopy and image analysis methods established in previous studies on binary Sn–Pb solder. A kinetic equation was developed with time exponent n of 0.43 and activation energy of 24000 J/mol, suggesting grain boundary diffusion or other fast diffusion pathways controlling the microstructural evolution. Compression testing and Vickers microhardness showed significant strength loss within the first 20–30 days after soldering; then, the microstructure and mechanical properties changed more slowly over long periods of time. Further, by combining accelerated aging data and the microstructure-based kinetics, strength predictions were made that match well with the properties of the actual soldered assemblies naturally aged for 30 years. However, aging at the highest temperature of 135 °C produced anomalous behavior suggesting that extraneous aging mechanisms are active. Therefore, data obtained at this temperature or higher should not be used. Overall, the combined microstructural and mechanical property methods used in this study confirmed that the observed reduction in strength of ~ 30-year-old solder joints can be accounted for by the microstructural coarsening that takes place during long-term solid-state aging.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Trash to Treasure: Waste Carbon into Construction Materials

Mineralization of industrial waste and earth-abundant CO2 into value-added products is a powerful method of utilizing domestic resources to produce value from waste. Carbonate minerals formed from Ca and Mg rich waste streams are key constituents in cement and concrete, which are in demand at the gigaton-scale every year. While thermodynamically favorable, CO2 mineralization is hindered by slow kinetics, and traditional thermochemical routes are too expensive to scale. Here, we demonstrate the advantages of an electrochemical method of waste valorization, which eliminates this limitation and improves kinetics. We highlight this method's ability to initiate crystallization under favorable local conditions, producing carbonates from mining waste at mildly acidic pH. We highlight the effects of key constituents in mining waste on the mineralization process.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2024

Data‐driven variational method for discrepancy modeling: Dynamics with small‐strain nonlinear elasticity and viscoelasticity

Abstract The effective inclusion of a priori knowledge when embedding known data in physics‐based models of dynamical systems can ensure that the reconstructed model respects physical principles, while simultaneously improving the accuracy of the solution in the previously unseen regions of state space. This paper presents a physics‐constrained data‐driven discrepancy modeling method that variationally embeds known data in the modeling framework. The hierarchical structure of the method yields fine scale variational equations that facilitate the derivation of residuals which are comprised of the first‐principles theory and sensor‐based data from the dynamical system. The embedding of the sensor data via residual terms leads to discrepancy‐informed closure models that yield a method which is driven not only by boundary and initial conditions, but also by measurements that are taken at only a few observation points in the target system. Specifically, the data‐embedding term serves as residual‐based least‐squares loss function, thus retaining variational consistency. Another important relation arises from the interpretation of the stabilization tensor as a kernel function, thereby incorporating a priori knowledge of the problem and adding computational intelligence to the modeling framework. Numerical test cases show that when known data is taken into account, the data driven variational (DDV) method can correctly predict the system response in the presence of several types of discrepancies. Specifically, the damped solution and correct energy time histories are recovered by including known data in the undamped situation. Morlet wavelet analyses reveal that the surrogate problem with embedded data recovers the fundamental frequency band of the target system. The enhanced stability and accuracy of the DDV method is manifested via reconstructed displacement and velocity fields that yield time histories of strain and kinetic energies which match the target systems. The proposed DDV method also serves as a procedure for restoring eigenvalues and eigenvectors of a deficient dynamical system when known data is taken into account, as shown in the numerical test cases presented here.

Masud, Arif↗

NASA NTRS2014

Comparison of Climatological Planetary Boundary Layer Depth Estimates Using the GEOS-5 AGCM

Planetary boundary layer (PBL) processes, including those influencing the PBL depth, control many aspects of weather and climate and accurate models of these processes are important for forecasting changes in the future. However, evaluation of model estimates of PBL depth are difficult because no consensus on PBL depth definition currently exists and various methods for estimating this parameter can give results that differ by hundreds of meters or more. In order to facilitate comparisons between the Goddard Earth Observation System (GEOS-5) and other modeling and observational systems, seven PBL depth estimation methods are used to produce PBL depth climatologies and are evaluated and compared here. All seven methods evaluate the same atmosphere so all differences are related solely to the definition chosen. These methods depend on the scalar diffusivity, bulk and local Richardson numbers, and the diagnosed horizontal turbulent kinetic energy (TKE). Results are aggregated by climate class in order to allow broad generalizations. The various PBL depth estimations give similar midday results with some exceptions. One method based on horizontal turbulent kinetic energy produces deeper PBL depths in the winter associated with winter storms. In warm, moist conditions, the method based on a bulk Richardson number gives results that are shallower than those given by the methods based on the scalar diffusivity. The impact of turbulence driven by radiative cooling at cloud top is most significant during the evening transition and along several regions across the oceans and methods sensitive to this cooling produce deeper PBL depths where it is most active. Additionally, Richardson number-based methods collapse better at night than methods that depend on the scalar diffusivity. This feature potentially affects tracer transport.

Planetary Boundary Layer Depth↗

DOE OSTI2025

Isoconversional Kinetic Analysis of Oxygen Desorption for Sr 0.75 Ca 0.25 FeO 3-δ Perovskite in Dry and Steam-Based Environments

The desorption kinetics of Sr 0.75 Ca 0.25 FeO 3-δ perovskite material are examined in both dry and steam-based environments using redox gaseous products of a laboratory-scale fixed bed. First, desorption kinetics associated with the dry environment are proposed based on Friedman’s isoconversional method. It is found from the reconstructed reaction model that the desorption kinetics of this perovskite are controlled by a three-step mechanism, where hypothetically, the phase-boundary reaction rapidly prevails first, followed by diffusion and/or nucleation, and finally, unimolecular decay or random nucleation-controlled reaction. Subsequent analyses of the Arrhenius parameters indicated that both the early and later desorption stages, respectively, controlled by the phase boundary and unimolecular/random nucleation reactions, are associated with low energetic demand. In contrast, a high energetic penalty is required for the diffusion/nucleation reaction. Further, a satisfactory a priori verification of the proposed kinetics suggested that the three-step reaction mechanism reasonably describes the desorption of this perovskite in a dry environment. With the presence of steam in the desorption environment, oxygen production is substantially inhibited, but the hypothetical three-step mechanism is still found to control the desorption. Meanwhile, the primary effects of the steam on these mechanisms include the widening of the conversion extent associated with the diffusion/nucleation reaction, along with a higher energetic demand compared to the dry environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Navigating the Path to Autonomy: Real-World Lessons from an Air-Free Self-Driving Laboratory

While autonomous experimentation has promise to accelerate discovery in physcial sciences, the real-world integration of predictive models and experimentation is non-trivial. Here we describe the genesis of a self-driving laboratory (SDL) for air-sensitive chemistry at Argonne National Laboratory and demonstrate the experimental design considerations needed for high-throughput experiments before predictive models can lead to scientific discovery. Our SDL was designed to explore battery electrolyte stability. Our final SDL utilized plate readers in a glovebox with a nitrogen atmosphere to perform kinetic assays and screen hundreds of battery-relevant solvents. However, the roadmap to autonomy and airfree-friendly experimentation required the complex evaluation of several spectroscopic and chromatographic methods. The greatest experimental challenges were (a) developing long-term sampling methods that remained air-free; (b) accelerating kinetics to advance reactivity projections; and (c) ensuring labware compatibility with nonaqueous solvents used in battery chemistry. Our experiences highlight the practical gap between closed-loop aspirations and the realities of chemical discovery, offering lessons on the challenges of transferring every day laboratory workflows to autonomy. These results suggest a more realistic blueprint for autonomy in chemistry—one that balances thoughtful and realistic experimental formulation.

Robertson, Lily A.↗

DOE OSTI2025

VARI3D & PERSENT: Perturbation and Sensitivity Analysis

The nodal diffusion method is one of the most widely used approaches in modern reactor analysis. In the nodal diffusion method, a coarse multi-group set of “homogenized” parameters is constructed such that the complex geometry of a reactor core along with the energy dependence of neutron and gamma ray cross sections in a nuclear reactor are conserved in the simpler geometry. The homogenization is typically done on a fuel assembly level as is the case in the DIF3D code developed at Argonne National Laboratory. The nodal methodology is used primarily to predict fuel cycle behavior of nuclear systems of which there is a substantial amount of validation in the literature. Another use of the nodal method is to obtain reactivity coefficients and kinetics parameters for use in a safety analysis of a given nuclear reactor. While there are many ways to obtain reactivity worth and kinetics parameters, the work presented in this manuscript is unique as it provides the user with the ability to compute reactivity worths, kinetics parameters, and cross section sensitivities with a Cartesian and hexagonal geometry based transport code. This manuscript serves as a single manual for two separate codes: VARI3D and PERSENT. The VARI3D code (VARIational 3D) is based upon the classic finite difference diffusion theory solver available in DIF3D. The PERSENT code (PERturbation and SENitivity for Transport) is based upon the variational nodal method employed in DIF3D termed VARIANT. The VARIANT solver was added to DIF3D in 1995 and has seen continued development and use for the last 18 years. Because VARI3D primarily uses deprecated coding practices, rather than incorporating the perturbation and sensitivity treatments for transport within VARI3D, a new coding development was built using modern Fortran coding. The primary purpose of this manual is to describe the theory behind PERSENT (and by convenience, that of VARI3D) and discuss the input and output of PERSENT along with giving potential users an idea of how to use it. While this manuscript does describe the input and output of VARI3D, the PERSENT code is intended to be the replacement capability of VARI3D as PERSENT can generate nearly identical (if not superior) diffusion theory results. In this manuscript, the relevant aspects of generalized perturbation theory and exact perturbation theory that apply to both VARI3D and PERSENT are covered. The input and output of VARI3D is displayed by excerpting several of the example problems. Similarly, the input and output of PERSENT is displayed along with tips on how best to use the code. Note that the input and output of the inhomogeneous solver wrapped around DIF3D (DIF3D_IFS) is also discussed as it is needed to carry out some of the sensitivities in PERSENT such as reaction rate ratios. This manuscript describes several perturbation and sensitivity problems, and the results computed using PERSENT. From these sections, potential users should find that PERSENT provides not only the typical tables of numbers desired in perturbation and sensitivity analysis work, but also can visually plot the result for a more thorough understanding of the space and energy distribution (Section 5). Overall, PERSENT is observed to produce accurate reactivity worths and sensitivities for the displayed set of test problems and clearly demonstrates the need to have a transport-based sensitivity capability as evident from the thousands of percent errors observed in the 21-group hexagonal fast reactor problem (covered in Section 7). The uncertainty calculation capability is described in Section 3 and demonstrated in Section 7.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

NASA NTRS1998

Cell Kinetic and Histomorphometric Analysis of Microgravitational Osteopenia: PARE.03B

Previous methods of identifying cells undergoing DNA synthesis (S-phase) utilized H-3 thymidine (3HT) autoradiography. 5-Bromo-2'-deoxyuridine (BrdU) immunohistochemistry is a nonradioactive alternative method. This experiment compared the two methods using the nuclear volume model for osteoblast histogenesis in two different embedding media. Twenty Sprague-Dawley rats were used, with half receiving 3HT (1 micro Ci/g) and the other half BrdU (50 microgram/g). Condyies were embedded (one side in paraffin, the other in plastic) and S-phase nuclei were identified using either autoradiography or immunohistochemistry. The fractional distribution of preosteoblast cell types and the percentage of labeled cells (within each cell fraction and label index) were calculated and expressed as mean q standard error. Chi-Square analysis showed only a minor difference in the fractional distribution of cell types. However, there were significant differences (p less than 0.05) by ANOVA, in the nuclear labeling of specific cell types. With the exception of the less-differentiated A+A'cells, more BrdU label was consistently detected in paraffin than in plastic-embedded sections. In general, more nuclei were labeled with 3H-thymidine than with BrdU in both types of embedding media. Labeling index data (labeled cells/total cells sampled x 100) indicated that BrdU in paraffin, but not plastic gave the same results as 3HT in either embedding method. Thus, we conclude that the two labeling methods do not yield the same results for the nuclear volume model and that embedding media is an important factor whenusing BrdU. As a result of this work, 3HT was chosen for used in the PARE.03 flight experiments.

Roberts, W. Eugene↗

NASA NTRS1998

Cell Kinetic and Histomorphometric Analysis of Microgravitational Osteopenia: PARE.03B

Previous methods of identifying cells undergoing DNA synthesis (S-phase) utilized 3H-thymidine (3HT) autoradiography. 5-Bromo-2'-deoxyuridine (BrdU) immunohistochemistry is a nonradioactive alternative method. This experiment compared the two methods using the nuclear volume model for osteoblast histogenesis in two different embedding media. Twenty Sprague-Dawley rats were used, with half receiving 3HT (1 micro-Ci/g) and the other half BrdU (50 micro-g/g). Condyles were embedded (one side in paraffin, the other in plastic) and S-phase nuclei were identified using either autoradiography or immunohistochemistry. The fractional distribution of preosteoblast cell types and the percentage of labeled cells (within each cell fraction and label index) were calculated and expressed as mean +/- standard error. Chi-Square analysis showed only a minor difference in the fractional distribution of cell types. However, there were,significant differences (p less than 0.05) by ANOVA, in the nuclear labeling of specific cell types. With the exception of the less-differentiated A+A' cells, more BrdU label was consistently detected in paraffin than in plastic-embedded sections. In general, more nuclei were labeled with 3H-thymidine than with BrdU in both types of embedding media (Fig 2.). Labeling index data (labeled cells/total cells sampled x 100) indicated that BrdU in paraffin, but not plastic gave the same results as 3HT in either embedding method. Thus, we conclude that the two labeling methods do not yield the same results.

Roberts, W. Eugene↗

DOE OSTI2025

Quantifying how the cis/trans ratio of N,N -dimethyl-3,5-dimethylpiperidinium hydroxide impacts the growth kinetics, composition and local structure of SSZ-39

This work integrates experiments and computational methods to quantify how the cis/trans ratio of the OSDA used in SSZ-39 synthesis impacts the crystallization kinetics, material properties, and final product composition. The crystallization kinetics increase by 30% when increasing the trans isomer content from 14% to 80%. Per prior work, in all cases based on the synthesis gel composition and product yield aluminum is the limiting reagent, and the absence of any amorphous material detected in the time resolved PXRD studies leads us to conclude that FAU dissolution is the rate limiting step in the formation of SSZ-39 in this synthesis protocol. The TGA and NMR results suggest that the trans isomer of OSDA is selectively incorporated into the product. The NMR binding studies, and corresponding DFT-based results show that the trans isomer binds to FAU more strongly than the cis isomer, providing one possible explanation for this enhancement in kinetics and preferential uptake of the trans isomer. The EDS analysis indicates that the Si/Al ratios are between 7.7 and 8.6 at low and high trans OSDA content, indicating zeolite composition is mildly sensitive to the trans isomer content. EDS results show this decrease in aluminum content leads to a corresponding decrease in sodium uptake. DFT-based calculations confirm OSDA–sodium interactions cannot explain any decrease in sodium uptake, reinforcing lower aluminum content as the cause of lower sodium uptake. Preliminary cobalt titration experiments show a surprisingly low cobalt uptake but also show a clear dependence of the cobalt uptake on the solution pH.

Cui, Zheng [Tulane University, New Orleans, LA (Un↗