Search NASA⌕ Search

SEARCH · Search NASA

Results for “LUBRICATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Thermal Behavior of Aerospace Spur Gears in Normal and Loss-of-Lubrication Conditions

Testing of instrumented spur gears operating at aerospace rotorcraft conditions was conducted. The instrumented gears were operated in a normal and in a loss-of-lubrication environment. Thermocouples were utilized to measure the temperature at various locations on the test gears and a test utilized a full-field, high-speed infrared thermal imaging system. Data from thermocouples was recorded during all testing at 1 Hz. One test had the gears shrouded and a second test was run without the shrouds to permit the infrared thermal imaging system to take date during loss-of-lubrication operation. Both tests using instrumented spur gears were run in normal and loss-of-lubrication conditions. Also the result from four other loss-of-lubrication tests will be presented. In these tests two different torque levels were used while operating at the same rotational speed (10000 rpm).

Gears↗

Thermal Behavior of Aerospace Spur Gears in Normal and Loss-of-Lubrication Conditions

Testing of instrumented spur gears operating at aerospace rotorcraft conditions was conducted. The instrumented gears were operated in a normal and in a loss-of-lubrication environment. Thermocouples were utilized to measure the temperature at various locations on the test gears and a test utilized a full-field, high-speed infrared thermal imaging system. Data from thermocouples was recorded during all testing at 1 hertz. One test had the gears shrouded and a second test was run without the shrouds to permit the infrared thermal imaging system to take data during loss-of-lubrication operation. Both tests using instrumented spur gears were run in normal and loss-of-lubrication conditions. Also the result from four other loss-of-lubrication tests will be presented. In these tests two different torque levels were used while operating at the same rotational speed (10000 revolutions per minute).

Gears↗

Assessing the Potential for Improved Lubricants to Reduce Wind O&M Costs

Lubrication is a key aspect of maintaining a wind turbine in operational condition. In this study, we quantify the potential for increasing energy production and reducing maintenance costs across the current and future U.S. fleet of wind turbines as a result of improvements in lubrication performance. The modeled improvements reduce the median levelized cost of energy by 1-2% across the U.S. fleet. Extending the lubricant replacement interval has a larger impact on total cost and energy production than reducing lubricant cost.

ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATION,↗

Design and Test of Self-Lubricating Bearing for High Temperature Gas-Cooled Reactor

Usually, any kind of mechanical bearing needs to be lubricated by oil or grease when it works. However, those bearings used in high temperature gas cooled reactor are required to work in high temperature up to 150 deg. C without oil or grease lubrication. To solve this problem, a new kind of self-lubricating bearing is designed with great effort, and its performance is tested with a customized bearing test rig. The final experimental result approves the effectiveness of the new self-lubricating bearing.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Vitrolube NPI-1220 Solid Lubricant Performance After Ultraviolet and Salt Fog Test Exposures

Vitrolube NPI-1220 is a ceramic-bonded solid lubricant produced by National Process Industries, Inc. (NPI) that uses molybdenum disulfide (MoS2) and graphite as lubricating pigments. It is applied to many space flight components, including nickel-alloy and stainless-steel components. Various applications, such as the powered nut and bolt assemblies in the international space station (ISS) (Illi, 1999), the Space Launch System (SLS) sliding bellows, and the SLS ball strut tie-rod assembly (BSTRA) use Vitrolube. No engineering data exists regarding possible Vitrolube degradation after extended exposure to coastal environments encountered by flight hardware on test stands or launch pads. Such environments include ultraviolet (UV) ray, high humidity, and salt exposures. In this study, nickel-alloy disks coated with Vitrolube by NPI, are exposed to controlled UV ray and ‘salt fog’ environments in facilities at Marshall Space Flight Center (MSFC). The exposed disks are run in tribological pin-on-disk tests to quantify any difference in coating lubricity and/or wear compared to coated disks that were not exposed to those environments.

Tribology↗

Oil‐Soluble Polymer Brush Grafted Nanoparticles as Effective Lubricant Additives for Friction and Wear Reduction

Abstract The development of high performance lubricants has been driven by increasingly growing industrial demands and environmental concerns. Herein, we demonstrate oil‐soluble polymer brush‐grafted inorganic nanoparticles (hairy NPs) as highly effective lubricant additives for friction and wear reduction. A series of oil‐miscible poly(lauryl methacrylate) brush‐grafted silica and titania NPs were synthesized by surface‐initiated atom transfer radical polymerization. These hairy NPs showed exceptional stability in poly(alphaolefin) (PAO) base oil; no change in transparency was observed after being kept at −20, 22, and 100 °C for ≥55 days. High‐contact stress ball‐on‐flat reciprocating sliding tribological tests at 100 °C showed that addition of 1 wt % of hairy NPs into PAO led to significant reductions in coefficient of friction (up to ≈40 %) and wear volume (up to ≈90 %). The excellent lubricating properties of hairy NPs were further elucidated by the characterization of the tribofilm formed on the flat. These hairy NPs represent a new type of lubricating oil additives with high efficiency in friction and wear reduction.

Wright, Roger A. E.↗

Tribological Performance of M50-Ag-TiC Self-Lubricating Composites at Elevated Temperature

M50 steel is widely used in aero-engine bearings and other high-temperature bearings. However, the poor wear of M50 steel resistance restrains its further applications. In this paper, the sliding tribological behaviors of M50 steel, M50-Ag composites (MAC) and M50-Ag-TiC composites (MATC) against Si{sub 3}N{sub 4} ball were investigated from 150 to 600 °C at 15 N-0.2 m/s. MATC showed better tribological properties in comparison with M50 and MAC. Especially at 450 °C, MATC obtained the lowest friction coefficient of 0.15 and smallest wear rate of 1.3 × 10{sup −5} mm{sup 3} N{sup −1} m{sup −1}. The excellent tribological performance of MATC during the friction test was attributed to the continuous lubricating film containing lubricant Ag and reinforcement TiC, as well as the subsurface compacted layer that could well support the lubricating film to prevent it from being destroyed. At 600 °C, because of the tribo-chemical reaction between Ag and Mo oxide during sliding process, the newly formed Ag{sub 2}MoO{sub 4} lubricating film was well spread out on the friction surface, which could continuously improve the tribological behavior of MATC. This investigation was meaningful to improve the anti-friction and wear resistance of M50 matrix bearing over a wide temperature range.

36 MATERIALS SCIENCE↗

The contribution of lubricant to the formation of particulate matter with reactivity controlled compression ignition in light-duty diesel engines

Reactivity controlled compression ignition (RCCI) has been shown in single- and multi-cylinder engine research to achieve high thermal efficiencies with ultra-low NO X and soot emissions. The nature of the particulate matter (PM) produced by RCCI operation has been shown in recent research to be different than that of conventional diesel combustion and even diesel low-temperature combustion. Previous research has shown that the PM from RCCI operation contains a large amount of organic material that is volatile and semi-volatile. However, it is unclear if the organic compounds are stemming from fuel or lubricant oil. The PM emissions from dual-fuel RCCI were investigated in this study using two engine platforms, with an emphasis on the potential contribution of lubricant. Both engine platforms used the same base General Motors (GM) 1.9-L diesel engine geometry. The first study was conducted on a single-cylinder research engine with primary reference fuels (PRFs), n-heptane, and iso-octane. The second study was conducted on a four-cylinder GM 1.9-L ZDTH engine which was modified with a port fuel injection (PFI) system while maintaining the stock direct injection fuel system. Multi-cylinder RCCI experiments were run with PFI gasoline and direct injection of 2-ethylhexyl nitrate (EHN) mixed with gasoline at 5 % EHN by volume. In addition, comparison cases of conventional diesel combustion (CDC) were performed. Particulate size distributions were measured, and PM filter samples were collected for analysis of lube oil components. Triplicate PM filter samples (i.e., three individual filter samples) for both gas chromatography-mass spectroscopy (GC-MS; organic) analysis and X-ray fluorescence (XRF; metals) were obtained at each operating point and queued for analysis of both organic species and lubricant metals. Here, the results give a clear indication that lubricants do not contribute significantly to the formation of RCCI PM.

33 ADVANCED PROPULSION SYSTEMS↗

Lipophilic Polymethacrylate Ionic Liquids as Lubricant Additives

Despite the growing research field of polymeric ionic liquids used as materials for electrolytes and energy materials, catalysts, separation aides, and carbon materials, reports of lipophilic polymeric ionic liquids for lubricants are essentially nonexistent. Oil-miscible single molecule ionic liquids (ILs) are reported to perform well as neat lubricants and as additives in lubricating base oils. Here in this work, methacrylate type ionic liquid monomers containing ammonium or imidazolium cations and two different counter-anions were synthesized and used as comonomers to obtain functional poly(alkyl methacrylates) (PAMAs) as viscosity index improvers (VII) additives for lubricants. The structure of the IL, including the cation, the anion, and the spacer’s length separating the IL from the methacrylate group, plays an important role in the resulting polymer solubility in PAO (poly-alpha olefin), solution rheology, friction, and wear behavior. Depending on the IL structure, VIIs containing up to 20 % mol IL are soluble in PAO (grade 4), and demonstrate frictionandwear reduction, compared to a conventional oil-soluble PAMA. Notably, wear volume reduction of up to 80 % compared to the oil-soluble control poly(dodecyl methacrylate) is observed.

36 MATERIALS SCIENCE↗

Tribological characteristics of aluminum alloys against steel lubricated by ammonium and imidazolium ionic liquids

Sliding friction and wear characteristics of aluminum alloys against AISI 52100 steel lubricated by ionic liquids (ILs) were investigated at both room and elevated temperatures. The tested aluminum alloys include a commercially pure aluminum Al 1100, a wrought alloy Al 6061-T6511, and a cast alloy Al 319-T6. The lubricating performance of two ILs with the same anion, one ammonium-based [C8H17]3NH.Tf2N and one imidazolium-based C10mim.Tf2N, were compared each other and benchmarked against that of a conventional fully-formulated engine oil. Significant friction (up to 35%) and wear (up to 55%) reductions were achieved by the ammonium IL when lubricating the three aluminum alloys compared to the engine oil. The imidazolium IL performed better than the oil but not as well as the ammonium IL for Al 1100 and 319 alloys. However, accelerated wear was unexpectedly observed for Al 6061 alloy when lubricated by C10mim.Tf2N. Surface chemical analyses implied complex tribochemical reactions between the aluminum surfaces and ILs during the wear testing, which has been demonstrated either beneficial by forming a protective boundary film or detrimental by causing severe tribo-corrosion. The effects of the IL cation structure, aluminum alloy composition, and tribo-testing condition on the friction and wear results have been discussed.

36 MATERIALS SCIENCE↗

Compatibility between Various Ionic Liquids and an Organic Friction Modifier as Lubricant Additives

Tribological performance of a boundary lubrication contact is largely dominated by the friction modifier (FM) and antiwear (AW) additives in the lubricant. While oil-soluble ionic liquids (ILs) have recently demonstrated promising AW functionality, their compatibility with FMs is little known and even less understood for nonferrous alloys. Here in this paper, we report the latest results for several selected ILs when used together with an organic FM (OFM) in lubricating a steel–bronze contact. Depending on the IL chemistry, either synergistic or antagonistic effects were observed. The three aprotic ILs ([P 8888 ][DEHP], [P 66614 ][BTMPP], and [P 66614 ][C 17 H 35 COO]) seemed to degrade the OFM’s lubricating performance. In contrast, the protic IL [N 888 H][DEHP] exhibited a strong synergistic effect with the OFM, yielding an ultralow steady-state friction coefficient (0.02) and a low wear rate (<10 –8 mm 3 /(N m)), which significantly outperformed the IL or the OFM alone. Surface characterization found no chemically reacted tribofilm on the bronze worn surface. On the other hand, a unique physically adsorbed surface film as a result of interconnection between the IL and OFM molecules by hydrogen bonds is proposed on the basis of chemical analysis. Such an adsorption surface film is expected to be difficult to compress vertically but easy to shear horizontally, leading to low friction and wear.

36 MATERIALS SCIENCE↗

Ultralow Boundary Lubrication Friction by Three-Way Synergistic Interactions among Ionic Liquid, Friction Modifier, and Dispersant

Interactions among antiwear additives (AWs), friction modifiers (FMs), and dispersant in a lubricating oil are critical for tribological performance. This study investigates compatibilities of three oil-soluble ionic liquids (ILs, candidate AWs) with an FM, molybdenum dithiocarbamate (MoDTC), and a dispersant, polyisobutene succinimide (PIBSI) under boundary lubrication. Either synergistic or antagonistic effects were observed depending on the IL’s chemistry. Adding an aprotic phosphonium–alkylphosphate or phosphonium–alkylphosphinate IL into the oil containing MoDTC and PIBSI had detrimental impact on the friction and wear behavior. PIBSI was found to preferably interact/react with the aprotic IL to lose its ability of suspending MoDTC and to partially consume or even deplete the IL. In contrast, a protic ammonium–alkylphosphate IL seemed to be able to coexist with PIBSI and work synergistically with MoDTC, yielding a sustainable, ultralow boundary friction. A three-stage tribochemical process is proposed to explain how this IL + MoDTC pair interacts with the contact surface to form a chemically reacted, wear-protective tribofilm supporting a physically adsorbed, friction-reducing film on top. We report this study provides fundamental insights of the compatibilities among three common lubricant components, antiwear, friction modifier, and dispersant, which can be used to guide future lubricant development.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Alkyl-Cyclens as Effective Sulfur- and Phosphorus-Free Friction Modifiers for Boundary Lubrication

Modern automotive engines operate at higher power densities than ever before, driving a need for new lubricant additives capable of reducing friction and wear further than ever before while not poisoning the catalytic converter. Reported in this paper is a new class of molecular friction modifier (FM), represented by 1,4,7,10-tetradodecyl-1,4,7,10-tetraazacyclododecane (1a), designed to employ thermally stable, sulfur- and phosphorus-free alkyl-substituted nitrogen heterocycles with multiple nitrogen centers per molecule. The multiple nitrogen centers enable cooperative binding to a surface which provides strong surface adsorption and lubricant film durability in the boundary lubrication (BL) regime. A 1 wt % loading of the cyclen FM 1a in Group III base oil exhibits strong surface adsorption, leading to excellent reductions in friction (70%) and wear (95%) versus the pure Group III oil across a wide temperature range. The lubricant with the new FM additive also outperforms two commercially available noncyclic amine-based FMs and a fully formulated commercial 5W30 motor oil.

Desanker, Michael↗

Dynamic Nanocrystal Superlattices with Thermally Triggerable Lubricating Ligands

The size-dependent and collective physical properties of nanocrystals (NCs) and their self-assembled superlattices (SLs) enable the study of mesoscale phenomena and the design of metamaterials for a broad range of applications. However, the limited mobility of NC building blocks in dried NCSLs often hampers the potential for employing postdeposition methods to produce high-quality NCSLs. In this study, we present tailored promesogenic ligands that exhibit a lubricating property akin to thermotropic liquid crystals. The lubricating ability of ligands is thermally triggerable, allowing the dry solid NC aggregates deposited on the substrates with poor ordering to be transformed into NCSLs with high crystallinity and preferred orientations. The interplay between the dynamic behavior of NCSLs and the molecular structure of the ligands is elucidated through a comprehensive analysis of their lubricating efficacy using both experimental and simulation approaches. Coarse-grained molecular dynamic modeling suggests that a shielding layer from mesogens prevents the interdigitation of ligand tails, facilitating the sliding between outer shells and consequently enhancing the mobility of NC building blocks. Further, the dynamic organization of NCSLs can also be triggered with high spatial resolution by laser illumination. The principles, kinetics, and utility of lubricating ligands could be generalized to unlock stimuli-responsive metamaterials from NCSLs and contribute to the fabrication of NCSLs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Towards developing robust solid lubricant operable in multifarious environments

Abstract Conventional solid lubricants such as MoS 2 , graphite, or diamond-like carbon films demonstrate excellent tribological performance but only in specific environments due to their inherent materials properties. This limitation prohibits using these solid lubricants in environments that change dynamically. This study presents the results of a novel solid lubricant that was developed using a combination of solution-processed 2D-molybdenum disulfide and graphene-oxide (GO) that can be deposited on to stainless steel substrates using a simple spray-coating technique and show exceptional performance in multifarious environments namely, ambient (humid) atmosphere, dry nitrogen, and vacuum. The tribological performance of the coatings was evaluated using a ball-on-disc sliding test and demonstrated an excellent wear/friction performance in all environments and coating survived even after 44 km of linear sliding. Transmission electron microscopy and Raman spectroscopy analysis of the tribolayers suggested in-operando friction-induced re-orientation of MoS 2 layers that were protected by GO layers and, an absence of MoO x peaks indicate a strong resistance to intercalation with moisture and oxygen. The simplicity and robustness of the hybrid MoS 2 –GO solid lubricant in mitigating wear-friction behavior of steel-on-steel tribopair in a multifarious environment is a game-changing and is promising for various applications.

36 MATERIALS SCIENCE↗

Chemical stability investigation of haloolefin refrigerants and their blends with lubricants

This paper examines the findings of highly accelerated life tests (HALT), conducted according to ASHRAE Standard 97 sealed glass tube methodology for R-123 like, R-134a like and R-410A/R-404A like lower global warming potential (GWP) alternatives. Additionally, possible chemical breakdown pathways are reviewed for the new haloolefin refrigerants. Note, compositions for the following blends are shown as percent by weight. For R-123 like refrigerants, R-1336mzz(Z), R-1336mzz(E), R-514A (74.7% R-1336mzz(Z)/25.3% R-1130(E)), R-1233zd(E), and R-1224yd(Z) were examined with and without lubricants. R-1233zd(E) and R-1224yd(Z) were evaluated with mineral oil and the rest were evaluated with polyalkylene glycol (PAG), polyolester (POE) and polyvinyl ether (PVE) lubricants. For R-134a like refrigerants, R-1234ze(E), R-450A (42% R-134a/58% R-1234ze(E)), R-515B (91.1% R-1234ze(E)/8.9% R-227ea), R-1234yf, R-513A (56% R-1234yf/44% R-134a), and R-516A (77.5% R-1234yf/8.5% R-134a/14.0% R-152a) were examined with and without PAG, POE, and PVE lubricants. For R-410A/R-404A like, R-454B (68.9% R-32/31.1% R-1234yf), R-454C (21.5% R-32/78.5% R-1234yf), R-455A (3.0% R-744/21.5% R-32/75.5% R-1234yf), and R-468A (3.5% R-1132a/21.5% R-32/75.0% R-1234yf) were also examined with PAG, POE and PVE lubricants. R-466A (49% R-32/11.5% R-125/39.5% CF 3 I) was part of this study but will not be covered since it does not contain a haloolefin component.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Miniature bearings lubricated by sonic dispersion method

Evenly distributing a monomolecular film over the balls and tracks of miniature precision ball bearings by sonic dispersion results in precise lubrication which prevents lubricant bleed out to adjacent components. Varying the lubricant to solvent ratio of the mixture causes varying lubricant coating thicknesses.

Source record↗

Dynamic-reservoir lubricating device

Dynamic-reservoir lubricating device supplies controlled amounts of lubricating oil to ball bearings during operation of the bearings. The dynamic reservoir lubricating device includes a rotating reservoir nut, a hollow cylinder filled with lubricating oil, flow restrictors and a ball bearing retainer.

Ficken, W. H.↗