Search NASA⌕ Search

SEARCH · Search NASA

Results for “LUNAR PROBE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Pyroxene poikiloblastic rocks from the lunar highlands

The results of detailed petrographic, X-ray, electron microprobe, ion probe, and Ar-40/Ar-39 age studies of pyroxene poikiloblastic breccias, an important lunar highlands lithology, are interpreted to indicate that high grade metamorphic recrystallization occurred over wide regions of the moon at about 4.0 G.y. This metamorphism was probably related to a period of high meteorite influx at that time. The temperatures achieved were highly variable but in some cases were sufficiently intense to cause varying degrees of partial melting of the precursor highlands breccias. A complete spectrum of metamorphic grades from only slight recrystallization to virtually complete melting would be expected in such a model. Such a spectrum is observed in the Apollo 16 rocks.

Bence, A. E.↗

The effect of interstitial gaseous pressure on the thermal conductivity of a simulated Apollo 12 lunar soil sample

The thermal conductivity of a simulated Apollo 12 soil sample is measured as a function of interstitial gas density, and implications for the thermal properties of lunar and Martian regolith are discussed. Measurements were performed for samples consisting of a mixture of Knippa and Berkely basalt powders with a grain size distribution identical to that of Apollo 12 lunar soil samples by the needle probe technique at interstitial pressures of He, N2, Ar and CO2 from 133,000 to 0.0133 Pa. It is shown that sample thermal conductivity decreases with decreasing interstitial gas pressure down to 1.0 Pa, due to the decreasing effective thermal conductivity of interstitial gas with decreasing gas pressure. Constant thermal conductivity values of 8.8 mW/m per K and 10.9 mW/m per K are obtained for sample densities of 1.70 and 1.85 g/cu cm, respectively, in agreement with in situ lunar regolith measurements. The results, which are greater than those obtained in previous soil studies, are explained by the dense packing of soil particles and enhanced intergranular thermal contact in the present experimental configuration, rather than the influence of interstitial gas pressure. The differences in conductivity between loose soils and packed regolith may also be used to account for the two peaks observed in Martian surface thermal inertia data.

Horai, K.-I.↗

Lunar Precursor Effects in the Solar Wind and Terrestrial Magnetosphere

The two ARTEMIS probes observe significant precursor activity upstream from the Moon, when magnetically connected to the dayside lunar surface. The most common signature consists of high levels of whistler wave activity near half of the electron cyclotron frequency. This precursor activity extends to distances of many thousands of km, in both the solar wind and terrestrial magnetosphere. In the magnetosphere, electrons reflect from a combination of magnetic and electrostatic fields above the lunar surface, forming loss cone distributions. In the solar wind they generally form conics, as a result of reflection from an obstacle moving with respect to the plasma frame (just as at a shock). The anisotropy associated with these reflected electrons provides the free energy source for the whistlers, with cyclotron resonance conditions met between the reflected source population and Moonward-propagating waves. These waves can in turn affect incoming plasma, and we observe significant perpendicular electron heating and plasma density depletions in some cases. In the magnetosphere, we also observe broadband electrostatic modes driven by beams of secondary electrons and/or photoelectrons accelerated outward from the surface. We also occasionally see waves near the ion cyclotron frequency in the magnetosphere. These lower frequency waves, which may result from the presence of ions of lunar origin, modulate the whistlers described above, as well as the electrons. Taken together, our observations suggest that the presence of the Moon leads to the formation of an upstream region analogous in many ways to the terrestrial electron foreshock.

Magnetosphere↗

Space Program

Solar phenomena, planetary and lunar compositions, plasmas, interplanetary particles, satellite probes, animal neurophysiology, engineering structures, and related space activities

NEUROPHYSIOLOGY↗

Proposed advanced satellite applications utilizing space nuclear power systems

A review of the status of space nuclear reactor systems and their possible applications is presented. Such systems have been developed over the past twenty years and are capable of use in various military and civilian applications in the 5-1000-kWe power range. The capabilities and limitations of the currently proposed nuclear reactor systems are summarized. Statements of need are presented from DoD, DOE, and NASA. Safety issues are identified, and if they are properly addressed they should not pose a hindrance. Applications are summarized for the DoD, DOE, NASA, and the civilian community. These applications include both low- and high-altitude satellite surveillance missions, communications satellites, planetary probes, low- and high-power lunar and planetary base power systems, broadband global telecommunications, air traffic control, and high-definition television.

Bailey, Patrick G.↗

Interplanetary small mission studies

This paper will highlight the results from these studies and discuss how the concurrent engineering environment of Team X lends itself to pre-phase A concept investigations.

small missions micromissions secondary launch luna↗

A Study of the Attraction Forces of Lunar Dust Simulant

In previous manned lunar missions little work was done on countermeasures to combat the spread of lunar dust onto equipment and into the habitat because the astronauts were not scheduled to stay on the lunar surface for extended periods of time. However, as NASA prepares to return to the moon for longer durations than before developing materials that can help in the fight against lunar dust is important. The purpose of this project is to examine the attraction forces between lunar dust and various materials in an effort to discover materials which have a low affinity for lunar dust. The adhesion forces present between individual grains of dust and various materials were analyzed using an atomic force microscope (AFM). The AFM probes were calibrated by the added-mass technique to find the spring constant of the cantilever. The probes were modified by attaching a particle of lunar dust stimulant to the cantilever arm. The adhesion force between the dust particle and various materials were determined by analysis of AFM force spectra.

Bradley, Robert Kelley↗

Interplanetary CubeSat Navigational Challenges

CubeSats are miniaturized spacecraft of small mass that comply with a form specification so they can be launched using standardized deployers. Since the launch of the first CubeSat into Earth orbit in June of 2003, hundreds have been placed into orbit. There are currently a number of proposals to launch and operate CubeSats in deep space, including MarCO, a technology demonstration that will launch two CubeSats towards Mars using the same launch vehicle as NASA's Interior Exploration using Seismic Investigations, Geodesy and Heat Transport (InSight) Mars lander mission. The MarCO CubeSats are designed to relay the information transmitted by the InSight UHF radio during Entry, Descent, and Landing (EDL) in real time to the antennas of the Deep Space Network (DSN) on Earth. Other CubeSatts proposals intend to demonstrate the operation of small probes in deep space, investigate the lunar South Pole, and visit a near Earth object, among others. Placing a CubeSat into an interplanetary trajectory makes it even more challenging to pack the necessary power, communications, and navigation capabilities into such a small spacecraft. This paper presents some of the challenges and approaches for successfully navigating CubeSats and other small spacecraft in deep space.

MarCo↗

Lattice Confinement Fusion Fast Fission – A Hybrid Power System for Accessing Icy World Oceans

Lattice Confinement Fusion (LCF) is an emerging power technology that can be combined with nuclear fission to produce a hybrid innovative power system. The proposed innovation is a compact, scalable nuclear energy source that does not use highly enriched uranium (HEU), high-assay enriched uranium (HALEU), low enriched uranium (LEU) nor plutonium-238. The nuclear energy source consists of a hybrid fusion-fast-fission method whereby neutrons generated from LCF are used to fission materials such as depleted uranium or thorium. LCF has been demonstrated by both NASA (published in Physical Review C) and by Lawrence Berkeley National Laboratory (published in the Journal of Applied Physics). Although these methods are reminiscent of Low Energy Nuclear Reactions (LENR), both methods operate at much higher energies than any attempt at cold fusion. This new hybrid energy source is sufficient to provide power and heat for melting or boring through icy caps with untethered, autonomous probes. These probes can be used for planetary (i.e., Pluto), lunar (i.e., Enceladus), or asteroid (i.e., Ceres) exploration where icy caps are encountered. Each world may have a liquid water ocean beneath their ice crust. A robotic probe exploring the oceans beneath must either melt or bore through the ice crust first. Such a mission requires a small, but robust and long lived, electrical energy and heat source such as the LCF Fast Fission hybrid power system.

Theresa L. Benyo↗

A Comparison of ARTEMIS Observations and Particle-in-cell Modeling of the Lunar Photoelectron Sheath in the Terrestrial Magnetotail

As an airless body in space with no global magnetic field, the Moon is exposed to both solar ultraviolet radiation and ambient plasmas. Photoemission from solar UV radiation and collection of ambient plasma are typically opposing charging currents and simple charging current balance predicts that the lunar dayside surface should charge positively; however, the two ARTEMIS probes have observed energydependent loss cones and high-energy, surface-originating electron beams above the dayside lunar surface for extended periods in the magnetosphere, which are indicative of negative surface potentials. In this paper, we compare observations by the ARTEMIS P1 spacecraft with a one dimensional particle-in-cell simulation and show that the energy-dependent loss cones and electron beams are due to the presence of stable, non-monotonic, negative potentials above the lunar surface. The simulations also show that while the magnitude of the non-monotonic potential is mainly driven by the incoming electron temperature, the incoming ion temperature can alter this magnitude, especially for periods in the plasma sheet when the ion temperature is more than twenty times the electron temperature. Finally, we note several other plasma phenomena associated with these non-monotonic potentials, such as broadband electrostatic noise and electron cyclotron harmonic emissions, and offer possible generation mechanisms for these phenomena.

Lunar↗

Mineralogy of the Ibitira eucrite and comparison with other eucrites and lunar samples

Single crystal X-ray and energy dispersive electron-probe techniques are used to study the mineralogy and track history of Ibitira. The mineralogical features of the Ibitire eucrite are described and examined in relation to data for other eucrites and howardites and lunar samples. The processes which transformed a presumed igneous texture into a more complex one are discussed.

Steele, I. M.↗

Plasma and potential at the lunar surface

The various plasma environments of the moon are described for the lunar orbit through the solar wind and geomagnetic tail. The sources of lunar surface charge, including plasma, photo, and secondary currents, are compared for their expected range of values. The electric potential is calculated from probe theory as a function of local position on the lunar surface; the theory includes plasma environments which are both stationary and flowing. In agreement with several other calculations, the potential at the subsolar point is likely to be a few volts positive. However, for the case when the moon is in the solar wind, the potential is calculated to be a few tens of volts negative at the terminator, and is expected to go to larger negative values on the dark side. If the moon traverses a significant plasma sheet in the geomagnetic tail, then the dark side potential tends toward several kilovolts negative but may be strongly limited by the secondary electron current. Associated surface electric fields are estimated.

Manka, R. H.↗

The chemistry of some individual lunar soil agglutinates

The inquiry is centered on the composition of agglutinate glasses examined via microprobe techniques. The glass chemistry of the agglutinates is brought into relation with compositions of constituent detritus and bulk compositions of the parent soils, with recent reported results taken into cognizance. Electron microprobe analysis data were examined for possible chemical fractionation resulting from meteoritic impacts and formation of agglutinates in the lunar regolith; individual agglutinates from lunar soils 78222, 71061, and 60009 were probed. Differences between impact glasses and corresponding bulk soils were scrutinized. Agglutinate glass analyses tend to cluster near the bulk soil compositions. A slight enrichment in mafic elements in grand averages of the agglutinate clusters relative to the bulk soils was found. Evidence of total impact melts and minor partial shock melts is examined.

Gibbons, R. V.↗

Space Studies Board Annual Report 1995

During 1995, the Space Studies Board and its committees and task groups gathered for a total of 40 meetings. Highlights of these meetings are presented. Formal study reports and short reports developed and approved during the meetings and issued during 1995 are represented in this annual report either by their executive summaries (for full-length reports), or by reproduction in full (for short reports). Nine full-length reports were distributed or delivered, including a congressionally mandated report by the Committee on the Future of Space Science and a comprehensive survey of Earth observation programs by the Committee on Earth Studies. Major research guidance reports were completed and published by the Committee on Microgravity Research and by the federated Committee on Solar and Space Physics/Committee on Solar-Terrestrial Research. Several significant assessment reports were also published, including an assessment of small missions by the Committee on Planetary and Lunar Exploration, a scientific evaluation of Gravity Probe B by the Task Group on Gravity Probe B, and an analysis of technologies for a 4-meter active optics telescope by the Task Group on BMDO New Technology Orbital Observatory. In addition, the Committee on Astronomy and Astrophysics Panel on Ground-based Optical and Infrared Astronomy released its report, and the Task Group on Priorities in Space Research issued its second and final report. Five short reports were also prepared and released during 1995. They addressed such diverse topics as reflight of shuttle-borne synthetic aperture radars, the role of NASA centers and center scientists in scientific research, guidelines for establishment of NASA research institutes, and clarification of findings of the microgravity research opportunities report and of the Future of Space Science Committee's management study.

Source record↗